Laboratory Mini Stenter Dryer
360 product view
    Click to enlarge
    Fabric Drape Tester
    Fabric drape tester $0.00
    Back to products
    Fabric flame retardant tester
    Fabric flame retardant tester $0.00

    Laboratory mini stenter Dryer

    $0.00

    Laboratory mini stenter Dryer
    Laboratory Mini Stenter Dryer

    Automatic fixing Dryer

     

    A Laboratory Mini Stenter Dryer is a compact, lab-scale machine designed to simulate the drying and heat-setting processes used in textile finishing. It mimics the function of industrial stenter machines but on a much smaller scale, making it ideal for testing fabric behavior, shrinkage, and finish quality under controlled conditions.

    Key Features:

    1. Controlled Heating System

    – Typically uses electric heating with adjustable temperature (up to 220–250°C).

    – Ensures uniform and precise temperature control.

    1. Adjustable Fabric Width

    – Equipped with clips or pins to hold and stretch fabric width-wise, simulating stenter frame action.

     

    1. Variable Speed Conveyor – Allows control over fabric dwell time for drying or heat-setting.
    2. Compact and Bench-Top Design – Space-saving design ideal for textile labs and R&D units.
    3. Digital Controls – Easy-to-use digital interface for setting temperature, conveyor speed, and process time.
    1. Transparent Viewing Window – Allows operators to monitor fabric movement and drying visually.
    2. Low Energy Consumption – Designed for lab use, consuming less power than industrial models.

    Applications:

    – Heat-setting of synthetic fabrics.   Drying and curing of samples post-dyeing or printing.

    – Evaluating fabric shrinkage, dimensional stability, and finish behavior.

    – Testing chemicals and auxiliaries used in textile finishing.

     

    Benefits of Laboratory Mini Stenter Dryer:

    1. Accurate Simulation of Production – Mimics industrial stenter conditions on a lab scale, ideal for pre-production testing and R&D.
    2. Cost-Effective Testing – Enables testing and fabric finishing without the high cost or space requirements of full-scale machines.

     

    1. Energy Efficient – Consumes less power compared to large stenters, making it economical for small-scale or frequent use.
    2. Precise Control – Offers accurate control of temperature, speed, and fabric tension, ensuring consistent results.

     

    1. Space-Saving Design – Compact and bench-top friendly, perfect for laboratories with limited space.
    2. Multiple Applications – Useful for drying, heat-setting, shrinkage testing, and evaluating chemical finishes.

     

    1. Faster Development Cycles – Speeds up new product development by allowing rapid sample testing and adjustments.
    2. Improved Fabric Quality – Helps optimize finishing parameters for better dimensional stability, hand feel, and appearance.
    3. Safe and User-Friendly- Designed with lab safety in mind, including temperature safety controls and easy operation.

     

    Features of Laboratory Mini Stenter Dryer:

    1. Compact Bench-Top Design – Ideal for laboratory use with limited space requirements.
    2. Adjustable Temperature Control – Precise heating (usually up to 220–250°C) with digital controllers for accurate processing.

     

    1. Variable Conveyor Speed- Allows adjustment of fabric dwell time for different drying or heat-setting needs.
    2. Width Adjustment Mechanism – Equipped with clips or pins to stretch and fix fabric width-wise, simulating industrial stenter conditions.

     

    1. Transparent Viewing Window – Enables visual monitoring of fabric movement and drying inside the chamber.
    2. Digital Display Panel- Easy-to-use interface for setting and monitoring temperature, speed, and time.
    3. Stainless Steel Construction- Durable and corrosion-resistant for long-term use at high temperatures.

     

    1. Uniform Heat Distribution- Ensures consistent fabric treatment across the width.
    2. Safety Features- Over-temperature protection and insulated body for operator safety.
    3. Versatile Applications – Suitable for drying, heat-setting, shrinkage testing, and chemical finish evaluations.

     

    Laboratory Mini Stenter Dryer dealer In Bangladesh,

    Lab Mini Stenter Dryer Importer in Bangladesh,
    Mini Stenter Dryer in Bangladesh,
    Laboratory Stenter Dryer in Bd,
    Lab Stenter Dryer In Uttara,
    Lab Stenter Price in Bangladesh,
    Laboratory Stenter Dryer in Bangladesh,
    Laboratory Mini Dryer in Bangladesh,

     

    Automatic fixing dryer

    Application:
    used for simulating the production onsite to produce the textile that meets customer requirement,
    including the time、temperature、resin auxiliary agent formula, elongation of the same textile, and
    it is also can provide basis manufacture and to ensure the correctness of mass production.
    Basic design as Automatic Fixing Dryer,also connect external steam for printing sample
    steaming. Owing the wide adjusting ranges regarding temperature, humidity, dwelling time, this
    apparatus can be used for :
    a) Electric heating for drying, curing and thermofixation, room temp.~230℃.
    b) Steaming with saturated steam 102±2℃
    c) Electric heating and steam together for HT steaming between 102±230℃

    Textile Testing Instruments
    Automatic Fixing Dryer  dealer In Bangladesh,
    Automatic Fixing Dryer Importer in Bangladesh,
    Automatic Fixing Dryer in Bangladesh,
    Automatic Fixing Dryer  in Bd,
    Automatic Fixing Dryer  In Uttara,
    Automatic Fixing Dryer  Price in Bangladesh,
    Automatic Fixing Dryer  Supplier in Bangladesh,
    Lab Dryer Machine in Bangladesh,
    Rapid Dryer Mini Stanter in Bangladesh

    Categories: , Tags: , , , , , , , , , , , , , Brand:
    Shipping & Delivery

    Related products

    Fabric Flame Retardant Tester

    Fabric flame retardant tester

    ,
    $0.00
    Fabric Flame Retardant Tester
    Fabric Flame Retardant Tester

    Fabric Flame Retardant Tester

      A Fabric Flame Retardant Tester is a specialized laboratory instrument designed to evaluate the flammability characteristics of textiles. It assesses how fabrics react to direct flame exposure, measuring parameters such as ignition time, flame spread rate, after-flame duration, and afterglow time. This testing is crucial for ensuring that textiles meet safety standards for various applications, including apparel, home furnishings, and industrial uses.   Purpose and Applications The primary purpose of a Fabric Flame Retardant Tester is to determine the flame resistance of textile materials. This is essential for:- Apparel Safety: Ensuring garments, especially children's sleepwear and industrial work wear, meet flammability standards. - Home Textiles: Testing curtains, drapes, upholstery, and bedding for fire safety compliance. - Technical Textiles: Evaluating materials used in tents, protective clothing, and automotive interiors.   ⚙️ Key Features Modern Fabric Flame Retardant Testers incorporate several features to ensure accurate and reliable testing:- Adjustable Burner Angles: Allowing tests at various orientations (e.g., 0°, 45°, 90°) to simulate different real-world scenarios. Automated Ignition Systems: Providing consistent flame application and reducing operator variability. - Digital Timing Mechanisms: Accurately recording ignition time, flame spread, after-flame, and afterglow durations.   - Transparent Observation Windows: Enabling safe monitoring of the test without exposure to hazards. - Compliance with International Standards: Meeting protocols such as ASTM D6413, ISO 6941, and EN ISO 15025 for standardized testing procedures.   Testing Standards Fabric Flame Retardant Testers are designed to comply with various international standards, including: - ASTM D6413: Standard Test Method for Flame Resistance of Textiles (Vertical Test). - ISO 6941: Textiles — burning behavior — Measurement of flame spread properties of vertically oriented specimens. - EN ISO 15025: Protective clothing — Protection against heat and flame — Method of test for limited flame spread.   ️ How It Works
    1. Sample Preparation: A fabric specimen is cut to specified dimensions and conditioned as per standard requirements.
    2. Mounting: The sample is mounted vertically or at a specified angle in the testing chamber.
    3. Ignition: A controlled flame is applied to the fabric for a predetermined time.
    4. Observation: The tester records ignition time, flame spread, after-flame time, and afterglow time.
    5. Evaluation: Results are compared against standard criteria to determine compliance.
        ✅ Benefits - Safety Assurance: Ensures textiles meet fire safety regulations, reducing risk in end-use applications. - Quality Control: Identifies flammability issues during the manufacturing process. - Regulatory Compliance: Helps manufacturers meet legal requirements for flammability. - Product Development: Assists in developing flame-retardant materials for specialized applications.   For more detailed information on specific models and their features, you can refer to manufacturers like SDL Atlas's Auto Flam Flammability Tester [1], TESTEX's Vertical Flammability Chamber TF312   How to Use a Fabric Flame Retardant Tester (Vertical Flammability Test Method):
    1. Prepare the Sample
    - Cut the fabric to standard dimensions (usually 300 × 75 mm). - Condition the fabric for 24 hours at 21°C and 65% relative humidity.  
    1. Mount the Sample
    - Place the fabric vertically in the frame inside the test chamber. - Ensure it's held securely with no folds or slack.  
    1. Set Up the Burner Position the burner at the required angle (usually 90° for vertical tests).
    - Adjust flame size according to the standard (about 38 mm for ASTM D6413).
    1. Ignite the Flame - Apply the flame to the bottom edge of the fabric for 12 seconds.
     
    1. Observe and Measure - Start timing when flame is applied.
    - Measure: - After-flame time (how long it burns after flame removal) - After-glow time (how long it glows after burning stops) - Char length (distance burned vertically)  
    1. Record the Results
    - Repeat the test on multiple samples (usually 5) and calculate averages.  
    1. Compare with Standards
    - Evaluate whether the results meet the required flame resistance limits.     fabric flame retardant tester IV type (small 450 method) Scope of application It is used for testing the intensity and speed of burning of flammable textile materials after ignition. (specific ignition nozzles and sample holders can be customized to meet multiple criteria). Related standards GB/T14644 ASTM D1230 CFR1610 etc. Technical parameters 1. The spread of time:0 ~ 999.9S resolution 0.1S 2. The temperature inside the box shows:Room temperature -99 degrees C resolution 1 c 3. Igniting time:1S 4. Type of igniter:4 1/2 syringe 5. Sample clip size:Outer frame:204mm * 78mm inner frame:152mm×38mm 6. Distance from the top of the igniter to the sample surface:8mm 7. Studio size and outline size Studio size:370mm×220mm×350mm Outline size:375mm×245mm×478mm 8. Power supply:AC220V 50Hz 20W 9. Weight:18Kg  
    Add to cart
    Quick view
    Oscillation Type Water Bath Dyeing Machine
    Oscillation Type Water Bath Dyeing Machine

    Oscillation type water bath Dyeing Machine

    ,
    $0.00
    Oscillation Type Water Bath Dyeing Machine
    Oscillation Type Water Bath Dyeing Machine

    water bath/Shaker bath Dyeing machine

    An Oscillation Type Water Bath Dyeing Machine is a laboratory apparatus designed for dyeing and washing textile samples under controlled temperature conditions. It combines a heated water bath with an oscillating mechanism to ensure uniform dye penetration and consistent coloration across fabric or yarn samples.   Key Features of Oscillation Type Water Bath Dyeing Machine - Oscillating Mechanism: Provides back-and-forth movement to agitate the dye solution, ensuring even contact between the dye and the textile sample.- Multiple Beaker Capacity: Typically accommodates 12 to 24 beakers, allowing simultaneous processing of multiple samples under identical or varied conditions.   - Digital Temperature Control: Maintains precise temperature settings, usually up to 99°C, suitable for various dyeing processes including atmospheric dyeing, scouring, and bleaching.- Adjustable Oscillation Speed: Offers variable speed settings, commonly ranging from 50 to 200 cycles per minute, to accommodate different fabric types and dyeing requirements. - Programmable Settings: Advanced models come with programmable controllers, allowing users to set and save multiple dyeing protocols for repeatability and efficiency. Durable Construction: Constructed with high-quality stainless steel (e.g., SUS304), ensuring resistance to corrosion and longevity even under rigorous laboratory conditions.   ✅ Benefits of Oscillation Type Water Bath Dyeing Machine - Uniform Dyeing Results: The oscillation mechanism ensures consistent dye penetration, reducing the risk of uneven coloration and enhancing the reproducibility of results.- Efficiency in Sample Processing: The ability to process multiple samples simultaneously accelerates laboratory workflows and facilitates comparative studies.   - Versatility: Suitable for a range of applications including dyeing, washing, scouring, bleaching, and fastness testing across various textile materials.- Energy and Resource Conservation: Designed for low liquor ratios (e.g., 1:5 to 1:20), these machines minimize water and chemical usage, promoting sustainable laboratory practices.   - Enhanced Safety and Cleanliness: Enclosed beaker systems reduce the risk of spills and exposure to chemicals, ensuring a safer laboratory environment.   Typical Applications of Oscillation Type Water Bath Dyeing Machine - Textile Research and Development: Ideal for developing and testing new dye formulations and processes on a small scale before scaling up to production levels. Quality Control: Used in quality assurance laboratories to assess color fastness, dye uptake, and other critical parameters of textile products.- Educational Purposes: Serves as a practical tool in academic settings for teaching dyeing principles and techniques. In summary, the Oscillation Type Water Bath Dyeing Machine is an essential tool in textile laboratories, offering precise control over dyeing parameters, improving efficiency, and ensuring high-quality, reproducible results across various textile materials.   Features of Oscillation Type Water Bath Dyeing Machine:
    1. Oscillating Mechanism - Provides back-and-forth movement of beakers for uniform dye penetration and sample agitation.
    2. Multiple Beaker Capacity - Supports dyeing of 12–24 samples simultaneously, ideal for comparative lab testing.
     
    1. Digital Temperature Control - Maintains precise water bath temperature (typically up to 99°C), essential for consistent dyeing.
    2. Variable Oscillation Speed - Adjustable speed settings (e.g., 50–200 cycles/min) to suit different materials and processes.
     
    1. Programmable Settings - Allows setting of temperature, time, and speed for repeatable and automated dyeing cycles.
    2. Stainless Steel Construction - Corrosion-resistant frame and bath for durability in chemical environments.
     
    1. Beaker Safety Holders - Secure placement of beakers to prevent spills and maintain consistent treatment.
    2. Compact Design - Lab-friendly size for easy integration into research and quality control spaces.
    3. Low Liquor Ratio Operation - Efficient dyeing using minimal dye bath volume (e.g., 1:5 to 1:20), reducing chemical and water use.
    4. Quiet and Stable Performance
    Engineered for smooth, vibration-free operation in laboratory conditions.     Oscillation Type Dyeing Machine Brand: DUNLIN Model:DL-D24 Origin: China Pot Capacity:24 Pot , 250ml SS Beaker Heating Mode: Electric heating Heating Medium: Water/ glycerin Heating Power: 3 Kw Temperature Range: RT- 99℃/250℃ Liquor Ratio: 1:5-:20 Thermostat Tiime:0~99min Oscillation: Speed:50-200rpm Oscillation Range: 40±3mm Power supply: 1∮AC 220V 50/60HZ Dimensions (LxWxH): 880×420×330mm Oscillation Type Dyeing Machine Dunlin price in Bangladesh Oscillation Type Dyeing Machine Dunlin in textile Textile testing equipment in Bangladesh Textile testing equipment in Dhaka Textile testing equipment in Uttara MAAM tex Oscillation Type Dyeing Machine Dunlin price in Bangladesh
    Oscillation Type Water Bath Dyeing Machine

    water bath/Shaker bath Dyeing machine

    Oscillation Type Dyeing Machine
    Add to cart
    Quick view
    IR Dyeing Machine Dunlin

    IR Dyeing Machine Dunlin

    , ,
    $0.00
    IR Dyeing Machine Dunlin
    IR Dyeing machine Dunlin is Safe, high efficiency, environment friendly, energy saving, optimum for new dyeing small sample machines

    IR Dyeing Machine Dunlin

    24 pot 300 ml IR Dyeing Machine Dunlin Application  This machine is oil bath type infrared laboratory dyeing machine, it combine the advantages of traditional glycerol dyeing machine with common infrared dyeing machine together. It’s apply to dyeing and testing the color fastness of the knitted fabric, woven fabric, yarn, cotton, loose fiber, zipper etc. It was special design for dyeing industry, chemical industry, raw material, cloth which can simulate the production conditions exactly and reach the process effect. Used for simulate the dyeing process in actual production, even apply for the small-batch production. Characteristics  Safety, high efficiency, environmental protection, energy saving and consumption reduction, which can fully meet the requirements of dyeing and color matching experiments; segmented heating sampling experiments, segmented, uniform  dyeing and Permeability test, dye absorption rate tests of pH, temperature and bath ratio differences, concentration and other tests, etc. In addition, the machine is highly personalized, and can make different specifications of dyeing steel cups according to customer needs. Feature   Easy to operate, dye pot can be individually Turn plate removed to save waiting time. The ability to conduct the tests of various dyes and chemicals on dispersing, leveling, liquor ratio exhausting etc. l Special recommendation for “STEP DYEING "to select the best dyestuff and combinations for the most Suitable dyeing curve to achieve the highest efficiency and quality Different sizes of dye pots for various weight of samples with yarn or fabric holders to ensure the good leveling result .There will be no crease mark.  Suitable for low liquor ratio dyeing. Sample weight from 4g to 20g.  Special design for humanity, durability and easy-maintenance. Safe, high efficiency, environment friendly, energy saving, optimum for new dyeing small sample machines Product Parameter of IR Dyeing machine Dunlin specifically designed with a focus on human usability, durability, and ease of maintenance. It prioritizes safety, high efficiency, and environmental friendliness while also being energy-saving. This machine is optimal for new dyeing small sample machines due to its product parameter advantages. specifically designed to prioritize humanity, durability, and ease of maintenance. It offers a safe, high-efficiency operation while being environmentally friendly and energy-saving. This machine is optimal for new dyeing small sample machines due to its specialized features and product parameters.  Model : IF-24S Infrared Laboratory Dyeing Machine Key Specification Model : IF-12S IF-24S Staining cup number 12/24 Staining cup volume 300cc OR 425cc Control mode LCD Microprocessor type, programmable process number: 100(0—99), 100 programmable steps per process Heat method Infrared heat Temperature range RT - 140 ℃ Temperature control accuracy ±0.2 ℃ Heating rate

    0 - 3.5 ℃ / min Cooling rate 0.2 - 5 ℃ / min Cooling method Air-cooled Rotation speed 0 - 60 rpm Liquor ratio 1:5 -1:100 Power supply 1∮AC 220V 50/60HZ Dimensions( L x W x H) 670×670×780mm 860×680×780mm Weight 100kg 120kg Standard Accessories Cups 1set

    Put the test sample. Cups stand 1set Place where to put cups. Protective glove 1set To avoid to be hurt by HT cups. Model: IF-24SCapacity: 24 pots Brad: DUNLIN Origin: China

    Color dyeing tests for various dyestuffs of IR Dyeing machine Dunlin
    1. Step dyeing tests. C. Dispersing, levelling and impregnating test. D. High or low liquor ratio exhausting tests. E. Fabric steak and staining tests. F. Concentration tests and others. Protection and Safety gates to protect. Temperature control accuracy +/- 0.2degree
    Working temperature of IR Dyeing machine Dunlin 20 – 140 degree Heating rate of dye bath 0 – 3.5degree / min Cooling rate 0.2 – 5 degree / min Cooling method air-cooled / Auto Speed control frequency conversion Rotation speed 0 – 60 turn / min Microprocessor type Newhaven controller 99 programs each Program with 99steps. IR Dyeing Machine Dunlin
    IR Dyeing machine

    IR Dyeing machine

     
    Add to cart
    Quick view
    Laboratory Padder
    Laboratory Padder

    Laboratory Padder

    $0.00

    Laboratory Padder

    Laboratory Padder

    Mini Lab Dyeing Padder

    A Laboratory Padder is a compact, laboratory-scale machine used to apply liquids like dyes, chemicals, and finishes to fabric samples. It simulates the padding process in textile manufacturing, where fabric is passed through a liquid solution, then squeezed between rollers to ensure uniform application and absorption.   Key Features of a Laboratory Padder:
    1. Adjustable Rollers - The fabric is passed through two or more rollers to apply even pressure and squeeze out excess solution, ensuring uniform chemical or dye application.
    2. Variable Pressure Control - Allows adjustment of roller pressure for different fabric types and chemical formulations, ensuring optimal penetration without damage.
     
    1. Solution Bath - Holds the liquid (e.g., dye, finish, or other chemical treatments) in a bath through which the fabric is dipped before passing through the rollers.
    2. Fabric Speed Control - Adjustable conveyor speed allows for control over the time the fabric spends in contact with the liquid solution, affecting the degree of treatment.
     
    1. Digital Control Panel - Provides easy adjustment of pressure, speed, and solution volume to ensure precise and reproducible results.
    2. Compact Design - Smaller, lab-scale version of industrial padders, ideal for research, development, and small-scale testing.
     
    1. Safety Features - Safety guards, emergency stops, and proper handling mechanisms to prevent accidents during operation.
    Applications: - Dyeing: For even application of dye or pigment on fabric. - Finishing: Applying finishes like softeners, water repellents, or flame retardants. - Chemical Treatments: Applying various chemicals used in textile manufacturing, such as anti-microbial treatments or stain-resistant solutions. - Shrinkage Testing: Simulating treatments to test fabric behavior under different conditions.   Benefits of Laboratory Padder:
    1. Precise Application of Chemicals - Provides uniform and controlled application of dyes, finishes, and other chemicals, ensuring consistent results.
    2. Small-Scale Testing - Ideal for small sample testing, allowing for fabric treatment without needing full-scale production equipment.
     
    1. Versatile Use - Suitable for dyeing, finishing, and applying various chemical treatments, making it a flexible tool for R&D labs.
    2. Cost-Effective - Reduces the need for large-scale machinery and the associated costs, while providing reliable results for small batches.
     
    1. Controlled Fabric Treatment - Offers adjustable pressure, speed, and solution concentration, enabling fine-tuned processing for different fabric types and applications.
    2. Accelerates Development - Speeds up the testing and development of new products or finishes, improving time-to-market for textile manufacturers.
    3. Energy Efficient - Consumes less energy compared to larger, industrial-scale machines, making it suitable for lab use.
    4. Compact and Space-Saving - Designed for laboratory environments with limited space, without compromising on functionality.
     
    1. Reproducible Results - Ensures consistent application of treatments across multiple samples, aiding in accurate testing and comparison.
      Features of Laboratory Padder:
    1. Adjustable Roller Pressure - Allows precise control over the pressure applied to the fabric, ensuring uniform chemical or dye application.
    2. Variable Speed Control - Adjustable conveyor speed for controlling the time the fabric spends in the solution bath, influencing the absorption rate.
     
    1. Solution Bath - Holds dye, chemicals, or finishes, and the fabric passes through this bath before moving to the rollers.
    2. Digital Control Panel - Easy-to-use interface for setting and adjusting parameters like speed, pressure, and solution concentration.
     
    1. Compact and Lab-Friendly Design - Designed for smaller, space-efficient use in textile labs, allowing for small sample testing.
    2. Roller Gap Adjustment - Allows for fine-tuning of the gap between rollers to regulate the amount of solution squeezed out of the fabric.
     
    1. Stainless Steel Construction - Durable and resistant to corrosion from the chemicals used in textile treatments.
    2. Safety Mechanisms - Includes safety guards, emergency stops, and user protection features during operation.
    3. Even and Controlled Application - Ensures even distribution of treatments (dye, finish, etc.) on fabric with minimal waste.
    4. Versatility in Application - Can be used for a wide range of textiles and treatments, including dyeing, softening, flame-retardant treatments, etc.
      How to Use a Laboratory Padder:
    1. Prepare the Fabric Sample - Cut the fabric sample to the required size for the experiment. Ensure it’s clean and free of any debris.
    2. Prepare the Solution - Mix the dye, chemical, or finish solution according to the desired concentration and the fabric's needs. Ensure that the solution is homogeneous.
     
    1. Set the Parameters - Pressure: Adjust the roller pressure based on the fabric type. Different fabrics require different pressure levels to ensure uniform application. - Speed: Set the fabric conveyor speed depending on the desired treatment time (longer exposure for deeper treatment).
    - Roller Gap: Adjust the roller gap to control the amount of liquid squeezed out from the fabric.  
    1. Load the Fabric into the Machine - Place the fabric carefully into the machine. The fabric should go through the solution bath and then pass between the rollers.
    2. Start the Machine - Turn on the machine and allow the fabric to pass through the rollers. The solution will be evenly applied to the fabric as it moves through the bath and is squeezed by the rollers.
     
    1. Monitor the Process - Keep an eye on the fabric to ensure it is being treated uniformly and there are no blockages or fabric jams.
    2. Unload the Fabric - Once the fabric has been treated, carefully remove it from the machine. Inspect for even application of the solution and any excess liquid.
     
    1. Dry or Process Further - Depending on the treatment, proceed with further steps such as drying, heat setting, or curing, as required by the experiment or process.
    Safety Tips:- Always wear appropriate personal protective equipment (PPE), such as gloves and goggles, when handling dyes or chemicals. - Ensure the machine is turned off and the rollers are stopped before attempting to remove or adjust the fabric.   Laboratory Padder dealer In Bangladesh, Lab Padder Importer in Bangladesh, Laboratory Padding mangle in Bangladesh, Laboratory Padding mangle in Bd, Laboratory Padder  Price in Bangladesh, Laboratory Padder in Bangladesh, Laboratory Padding mangle price in Bangladesh       Laboratory Padder
    Laboratory Padder

    Mini Lab Dyeing Padder

    Brand: DUNLIN Model:PM-A1 Origin: China Roller position: Vertical Rollers width :450mm Rollers diameter:125mm Rubbers hardness: 70degree shore Cloth speed: 0-10m/min Standard pressure: 0.6Mpa Retained dyestuff ratio: 40-80% Power supply: 1∮AC 220V 50/60HZ Dimensions (L x W x H):710 x 600x 1340mm Standard Accessories English manual Certificate of quality. Laboratory Padder Machine Dunlin price in Bangladesh Laboratory Padder Machine Dunlin in textile Textile testing equipment in Bangladesh Textile testing equipment in Dhaka Textile testing equipment in Uttara MAAM tex Laboratory Padder Machine Dunlin price in BangladeshLaboratory Padder
    Add to cart
    Quick view
    Pantone Book

    Pantone book

    ,
    $0.00

    Pantone Book

    Pantone Book

    Pantone Book

      A Pantone Book, commonly referred to as a Pantone Color Guide, is a professional color matching tool used across industries like graphic design, fashion, printing, packaging, and product manufacturing. It helps ensure consistent color communication from design to final production.   What It Does? - Displays standardized Pantone colors in fan-deck or chip book format. - Provides color codes, ink formulas, and finish types for accurate color replication.     Types of Pantone Books:
    1. Formula Guide (Solid Coated & Uncoated) – For spot color printing.
    2. Color Bridge – Shows Pantone spot colors alongside CMYK equivalents.
    3. Pantone Fashion, Home + Interiors (FHI) – For textiles, soft goods, and home decor.
    4. Pantone CMYK and Pastels & Neons Guides – For process printing and special effect colors.
      ⚙️ Features of Pantone Book: - Thousands of pre-defined colors. - Ink mixing formulas (for printers). - Available in coated, uncoated, and matte finishes. - Some include digital tools or access to Pantone Connect software.   ✅ Benefits of Pantone Book: - Ensures accurate color matching across designers, clients, and manufacturers. - Supports branding consistency across all printed and physical materials.   key benefits of using a Pantone Book: ✅ 1. Accurate Color Communication- Ensures consistent color matching between designers, printers, and manufacturers—globally. ✅ 2. Industry Standard- Trusted across printing, fashion, packaging, and branding for reliable color references.   ✅ 3. Saves Time and Reduces Errors - Eliminates guesswork in color approval, helping avoid costly reprints or corrections. ✅ 4. Versatile Applications - Supports multiple media types: print, fabric, plastics, digital design, etc. ✅ 5. Real-World Color View - Physical swatches show true ink or dye appearance, which digital screens can’t replicate accurately.   ✅ 6. Ink Mixing Formulas - Provides exact mixing guides for printers to replicate spot colors precisely. ✅ 7. Global Consistency - Helps maintain brand color consistency across international production sites.   key features of a Pantone Book: 1. Standardized Color System - Includes thousands of pre-defined Pantone Matching System (PMS) colors with unique codes. 2. Multiple Finish Types - Available in Coated (C), Uncoated (U), Matte (M) formats to match different printing surfaces.   3. Fan Deck or Chip Format - Comes in portable fan-deck or tear-away chip books for easy reference and sharing. 4. Ink Mixing Formulas - Provides precise ink formulas for each color, ideal for print production. 5. Specialized Editions - Guides tailored for graphic design, textiles (FHI), plastics, and digital design.   6. Cross-Media Consistency - Ensures uniform color across print, web, fabric, and packaging. 7. Digital Integration - Many books include access to Pantone Connect for digital workflow and color data sync.   Here’s a simple guide on how to use a Pantone Book effectively: ✅ 1. Choose the Right Pantone Book - Use Formula Guide for print. - Use FHI (Fashion, Home + Interiors) for textiles. - Use Color Bridge to compare spot colors with CMYK.   ✅ 2. Select the Color - Flip through the fan deck or chip book to find the desired color. - Note the Pantone code (e.g., Pantone 186 C for coated paper). ✅ 3. Communicate the Code - Share the Pantone number with printers, manufacturers, or team members to ensure consistent color use.   ✅ 4. Use the Right Finish - Make sure you're referencing coated, uncoated, or matte depending on your final material. ✅ 5. Compare to Printed Proofs - Use the physical Pantone swatch to check if print proofs or samples match. ✅ 6. Maintain Lighting Consistency - View colors under standard lighting (D50) for accurate color judgment.   ✅ 7. Store Properly - Keep the Pantone book in a cool, dry place and replace it every 12–18 months to avoid fading.   Pantone offers a diverse range of color guides tailored to various industries and applications. Here's an overview of the main Pantone book models:     Pantone Graphics & Print Guides  
    1. Formula Guide (Solid Coated & Uncoated)
    - Features over 2,390 spot colors with corresponding ink formulations. - Essential for branding, packaging, and print design. - Provides accurate color matching for solid colors.  
    1. Color Bridge Guide (Coated & Uncoated)
    - Displays side-by-side comparisons of Pantone spot colors and their closest CMYK equivalents. - Includes CMYK, RGB, and HEX values for digital and print consistency. - Ideal for projects requiring color translation across different media.  
    1. CMYK Guide (Coated & Uncoated)
    - Contains a comprehensive range of CMYK colors. - Useful for four-color process printing without spot colors. - Helps in selecting colors achievable through standard CMYK printing.  
    1. Pastels & Neons Guide
    - Offers a collection of soft pastel and vibrant neon colors. - Suitable for creative projects in fashion, print, and packaging. - Provides unique color options for special design applications.  
    1. Metallics Guide
    - Features metallic spot colors for premium print finishes. Ideal for luxury packaging, branding, and high-end print materials. - Adds a sophisticated touch to printed designs.   Pantone Fashion, Home + Interiors (FHI) Guides
    1. FHI Color Guide (TPG – Paper)
    - Contains a wide range of colors for non-fabric materials. - Used in product design, cosmetics, and interiors. - Provides color inspiration for various applications.  
    1. FHI Cotton Passport & Cotton Planner (TCX – Textile)
    - Offers colors on cotton fabric swatches. - Essential for textile and apparel design. - Ensures accurate color communication in fabric production.  
    1. FHI Polyester Swatch Book
    - Includes colors on polyester fabric. - Useful for sportswear, footwear, and synthetic textiles. - Provides color options specific to polyester materials.   Pantone Specialty Guides  
    1. Pantone SkinTone Guide
    - Features a range of skin tone colors. - Used in cosmetics, healthcare, and product development. - Aids in creating products that match diverse skin tones.  
    1. Pantone Plastic Standard Chips
    - Provides color references on plastic substrates. - Essential for industrial design, consumer electronics, and appliances. - Ensures color accuracy in plastic product manufacturing.   Pantone Bundles & Studio Sets   - Portable Guide Studio - A comprehensive set including multiple Pantone guides. - Designed for professionals needing a wide range of color references. - Convenient for on-the-go color selection and matching.   - Essentials Set - Combines key Pantone guides into one package. - Ideal for designers seeking a versatile color toolkit. - Offers a cost-effective solution for comprehensive color needs.   Each Pantone guide serves specific purposes across different industries. Selecting the appropriate guide depends on your project's requirements and the materials involved.
    Pantone Book

    Pantone Book

     
    Add to cart
    Quick view
    Digital hot plate-magnetic stirrer
    Color Matching Cabinet -light Box

    Digital hot plate-magnetic stirrer

    ,
    $0.00

    Digital hot plate-magnetic stirrer

    Digital hot plate-magnetic stirrer

    Digital hot plate-magnetic stirrer

      A digital hot plate-magnetic stirrer is a laboratory device that combines two essential functions: heating and stirring. It is widely used in chemistry, biology, and physics laboratories for preparing solutions, mixing chemicals, and conducting experiments that require controlled heating and stirring. Model : (DL-300) Brand : DUNLIN Origin : TAIWAN Set-up plate Dimensions : Ø 135 mm Motor type : DC Motor Speed range : 0-1500 rpm Display : 5 Inch LED Display Heating temperature range : Room Temp. 0-280°C Temperature display : 5 Inch LED Display Temperature display accuracy : ±0.1 Protection class according to DIN EN 60529 : IP42 Power Supply : 200-240V 3A Dimensions ( W x D x H ) : ( 255 x 152 x 80 ) mm Key Components of Digital hot plate-magnetic stirrer: Hot Plate (Heating Element): - Provides a flat surface that heats up electrically. - Controlled via a digital interface for setting precise temperatures. - Often features over-temperature protection for safety.
    1. Magnetic Stirrer:
    - Uses a rotating magnetic field to spin a magnetic stir bar placed in the liquid. - Ensures even mixing of the solution without manual stirring. - Speed can be adjusted digitally.  
    1. Digital Display and Controls:
    - Allows precise setting of temperature and stirring speed. - Typically includes an LCD or LED screen. - Some models have programmable settings and timers.  
    1. Temperature Sensors:   - Built-in or external probes (like a PT100 or thermocouple) for accurate temperature control.
      Features of Digital hot plate-magnetic stirrer: - Temperature Range: Usually ranges from ambient to 300°C or higher. - Stirring Speed: Typically ranges from 100 to 1500 RPM. Material: The top plate is often made from ceramic, aluminum, or stainless steel to ensure durability and chemical resistance.   Applications Digital hot plate-magnetic stirrer: - Dissolving solids in liquids. - Heating samples while stirring to ensure uniform temperature distribution. - Conducting chemical reactions that need constant stirring and controlled heat. - Biological and pharmaceutical sample preparation.     Benefits of using a Digital Hot Plate & Magnetic Stirrer in laboratory and industrial settings:
    1. Precision and Control- Digital Interface: Allows accurate setting and monitoring of temperature and stirring speed.- Consistent Results: Ensures reproducibility in experiments and solution preparations.
     
    1. Efficient Mixing and Heating- Uniform Mixing: Magnetic stirring eliminates hotspots and ensures even distribution of solutes.- Simultaneous Operation: Ability to heat and stir at the same time improves efficiency.
     
    1. Safety Features- Overheat Protection: Prevents accidents by automatically shutting off at unsafe temperatures.- Sealed Surface: Reduces risk of contamination and easy to clean.
     
    1. Versatility
    - Suitable for a wide range of applications including chemical synthesis, biological experiments, and pharmaceutical processes.- Compatible with various types of containers and volumes.  
    1. Compact and User-Friendly- Takes up minimal bench space.- Simple to operate with user-friendly controls and displays.
    2. Durability- High-quality materials like ceramic or stainless steel tops resist corrosion and wear.
    3. Time-Saving Speeds up preparation of solutions and reactions compared to manual stirring and separate heating. Would you like these benefits presented in a slide format or for a product brochure?
    Add to cart
    Quick view
    VeriVide Colour Assessment Cabinets
    Color Matching Cabinet -light Box

    VeriVide Colour Assessment Cabinets

    , ,
    $0.00

    VeriVide Colour Assessment Cabinets

    VeriVide Colour Assessment Cabinets VeriVide offers high-quality Colour Assessment Cabinets (CACs) such as the CAC 60-4, CAC 60-5, and CAC 120-4&5. These cabinets, originating from the UK, are reliable tools for visual evaluation in quality assurance, meeting national, international, and retailer standards. They effectively mitigate issues related to color assessment.VeriVide Colour Assessment Cabinets High-quality visual evaluation tool for quality assurance. Adhering to national, international and retailer standards.Colour Assessment Cabinet's (CACs) reduce problems associated with assessing products or samples in different environments,be though geological or seasonal, offering a cost-effective method to ensure visual accuracy and product quality. Color Light Box Enhance color precision with VeriVide's cutting-edge Colour Assessment Cabinets. These cabinets are meticulously designed to ensure accurate color evaluation in various industries. Invest in VeriVide Colour Assessment Cabinets to elevate your color assessment process.  Enhance Color Precision with VeriVide's Cutting-Edge Assessment Cabinets, which meet or surpass ISO 3664 and BS 950 Part 1 international standards. The cabinets are adaptable to user requirements, with lamp options to choose different light sources. Available in 60, 120, and 150cm widths, VeriVide Colour Assessment Cabinets provide a flexible solution for accurate color assessment. Incorporate user-friendly features like servicing indicator, auto sequence, warm-up, power save and data storage.4 or 5 light source options Versions available for colour fastness testing and particulate testing both adhering to global standardsEnsure  that you are using the best equipment available as they provide the best fluorescent D65 daylight simulator, with the highest Colour   Rendering Index (CRI), available. VeriVide Colour Assessment Cabinets products are known as light boxes, viewing booths, colour cabinets and others, depending on which industry or country they are serving in. They are used within a wide array of industry sectors throughout the world including textile and apparel, graphics, automotive, ceramics, cosmetics, pharmacology (CAC Particulate),   food, footwear, packaging and printing.Download the Datasheet below for more information or click 'VeriVide CAC Datasheet Here' to get in touch with colour experts. VeriVide CAC Datasheet Here Features of VeriVide Colour Assessment Cabinets • CAC 60, CAC 120 and CAC 150 accommodate 60, 120 and 150cm tubes respectively
    • Either 4 or 5 light sources available for each model including D65, D50, 840P15, F and UV - see Lamp Options.• Internal finishes in Munsell N5, Munsell N7 or Grey 5574 • Diffuser and/or dimmer options available​ Dimensions of VeriVide Colour Assessment Cabinets CAC 60-4 Dimensions (mm) Width Height Depth Overall 710 545 420
    Viewing Area 680 360 380 CAC 60-5 Dimensions (mm) Width Height Depth Overall 710 545 540 Viewing Area 680 360 495 CAC 120-4 and CAC 120-5 Dimensions (mm) Width Height DepthOverall 1290 755 620 Viewing Area 1260 570 585 CAC 150-4 and CAC 150-5 Dimensions (mm) Width Height Depth Overall 1560 755 620 Viewing Area 1530 570 585 Lamp Options of VeriVide Colour Assessment Cabinets Features of VeriVide Colour Assessment Cabinets Lamp specifications: CIE Daylight Illuminants Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code D75 VeriVide D75 "Artificial Daylight" Correlated colour temperature 7500K. Conforming to the USA ASTM (American Society for Testing and Materials) D1729-82 standard for D75 Illuminant. With high CIE specifications, for accurate colour matching. 96 600mm 20w T12 600D75 D65 VeriVide D65 "Artificial Daylight" VeriVide D65 “Artificial Daylight”. Correlated colour temperature 6500K. Within the tolerances prescribed in BS 950: Part 1; and all international specifications for D65 illluminant. Specified for most applications where there is a need to maintain colour consistency and quality.Conforming highly to the CIE specifications, for accurate colour matching. 98 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 600D65 1200D65 1500D65 D50 D50 "Artificial   Daylight" Correlated colour temperature of 5000K. For the Graphic Technology and Photography industries. D50 lamps conform to BS 950: Part 2 and ISO 3664. Recommended for transmitted light source to view transparencies and for the reflected light source to view reproductions. 98 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 60095 120095 150095 CIE Illuminant 'A' Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code'F' Tungsten Filament Tungsten Filament Lighting. Approximate color temperature of 2800K. Required by BS 950: Part 1 as a test for metamerism (approximating CIE Illuminant ‘A’). Typical light source used within domestic environments. 100 Globe Globe Round Clear-   284mm Opal-284mm 40w60w 150w 60w 60w 45mm 45mm - 40G450 60G450 150FILO 28460CL28460OP'A' Tungsten Halogen Tungsten Halogen Lighting (CIE Illuminant ‘A’). This represents incandescent A (inc-A) with a colour temperature of 2856K. Typical light source used within domestic environments. Used to check for metamerism. 100 - 35w - HALO/12V /35WLP Alternative (fluorescent) lighting / Point of SaleLight Source Name Lamp Description C.R.I. Length Watts Diam Product Code840 P15 VeriVide 840P15 Narrow Band Triphosphor Fluorescent Lamps. Correlated colour tempera ture of 4000K. CIE Illuminant F11. Often chosen as a European “Point of Sale” light source, with good colour rendering and manufactured to a tighter tolerance specification as prescribed by Marks & Spencer. (Formerly TL84P15) 85 600mm 1200mm 1500mm 18w 36w 58w T8 T8T8 60084P15120084P15 150084P15CWF Cool White Cool White Broad Band Fluorescent Lamps. Correlated colour temperature of 4000K. Used as an American “Point of Sale” light source. Moderate colour rendering. 62 600mm 1200mm 1500mm 20w 40w 65/80w T12 T12 T12 60033 120033 150033U35 Ultralume 35 Ultralume Narrow Band Triphosphor Fluorescent Lamp.Correlated colour temperature 3500K. An American “Point of Sale” light source, with good colour rendering. 86 600mm 1200mm 17w 32w T8 T8 T8 600U35 1200U35 830 830 Narrow Band Triphosphor Fluorescent Lamp. Correlated colour temperature 3000K. Often chosen as a European “Point of Sale” light source with good colour rendering.(Formerly TL83) 85 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 60083 120083 150083 Horizon Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code 'H' Horizon Lighting Colour temperature 2300K. Used for Automotive, Apparel and Metamerism Testing. As specified by the ASTM (American Society for testing and Materials) D1729-74, Standard Practise for Visual Evaluation of Colour Differences of Opaque Materials. 98 - 75w - HALO/12V /75WUltraviolet Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code UV Ultraviolet Ultraviolet Blacklight. Used to detect the presence of Optical Brightening Agents and/or Fluorescent dyes. Therefore it is useful when assessing white and Fluorescent shades to check the level present and its evenness. N/A Clear-450mm Blacklight-600mm 15w 18w T8 T8 450UV15 600UV18 Paint specification of  VeriVide Colour Assessment Cabinets PAINT (For Cabinet Interiors) Name Description Quantity Product Code Crown Plain Grey 5574 Matt Emulsion 0.5 Litre Tins 5574 0.5L Munsell N5 0.5 Litre Tins N5 0.5L Munsell N7 0.5 Litre Tins N7 0.5L VERIVIDE MAINTENANCE PACK The VeriVide Maintenance Pack includes Cleaning Materials, Brush & Roller plus 0.5 litres of Paint.   https://maamtexbd.com/product/verivide-colour-assessment-cabinets/
    Add to cart
    Quick view
    Laboratory Hydro Extractor
    Laboratory Hydro Extractor

    Laboratory hydro Extractor

    $0.00

    Laboratory Hydro Extractor

    Laboratory Hydro Extractor

    Laboratory Hydro Extractor

      A Laboratory Hydro Extractor is a compact, high-speed centrifuge used in textile labs to remove excess water from fabric or yarn samples after dyeing or washing. It works on the principle of centrifugal force, efficiently reducing moisture content before drying. Key Features:
    1. Centrifugal Water Extraction - Uses high-speed spinning (typically 1400–2800 RPM) to extract water from textiles.
    2. Stainless Steel Inner Basket - Perforated drum holds fabric/yarn securely and allows water to drain efficiently.
     
    1. Compact Lab Design - Space-saving unit designed specifically for laboratory sample sizes.
    2. Digital Timer and Speed Control - Allows precise setting of spin duration and RPM to match sample needs.
    3. Safety Lock System - Ensures the lid remains closed during operation for user safety.
     
    1. Quick Water Removal - Significantly reduces drying time by extracting up to 90–95% of water content.
    2. Low Noise and Vibration - Balanced design ensures quiet and stable operation.
      Applications: - Dewatering of dyed or washed fabric/yarn lab samples. - Pre-drying step in dyeing and finishing tests. - Useful in textile, apparel, and dyeing labs for faster workflow.   Benefits of Laboratory Hydro Extractor:
    1. Efficient Water Removal - Rapidly extracts 90–95% of water from samples, reducing drying time significantly.
    2. Saves Time and Energy - Cuts down the load on dryers and shortens total processing time in lab workflows.
    3. Improves Sample Quality - Gentle spinning preserves fabric structure, avoiding damage or distortion.
     
    1. Precise Control - Adjustable speed and timer ensure optimal settings for different fabric types.
    2. Compact and Lab-Friendly - Small footprint ideal for laboratory use with limited space.
    3. User Safety - Safety lock prevents lid opening during operation, protecting the user.
    4. Cost-Effective - Reduces the need for extended dryer use, saving on electricity and equipment wear.
     
    1. Versatile Use - Suitable for yarn, fabric, and garment samples across various fiber types.
    Features of Laboratory Hydro Extractor:  
    1. High-Speed Centrifugal Operation - Typically runs at 1400–2800 RPM for quick and efficient water removal.
    2. Stainless Steel Inner Drum - Corrosion-resistant, perforated basket for durability and efficient water drainage.
    3. Digital Timer and Speed Control - Allows precise control of spin duration and speed based on sample type.
     
    1. Compact and Portable Design - Ideal for lab environments with limited space.
    2. Safety Lock Mechanism - Prevents the lid from opening while the machine is in operation.
    3. Shock Absorption System- Reduces vibration and noise for smooth, stable performance.
     
    1. Quick Cycle Times - Short dewatering cycles improve lab throughput and efficiency.
    2. Low Maintenance Design - Simple mechanical setup with easy-to-clean components.
    3. Sample Versatility - Suitable for small fabric swatches, yarns, and small garments.
    4. Energy Efficient - Uses minimal power while delivering high performance.
    How to Use a Laboratory Hydro Extractor:
    1. Prepare the Sample - After dyeing or washing, gently squeeze excess water from the fabric or yarn sample by hand.
    2. Load the Sample - Open the lid and place the sample evenly in the stainless steel drum. - Avoid overloading or uneven placement to maintain balance.
     
    1. Close the Lid securely - Ensure the safety lid is properly closed and locked.
    2. Set the Timer and Speed - Use the control panel to set the spin time (typically 1–5 minutes) and RPM suitable for the sample type.
    3. Start the Machine- Press the start button. The extractor will spin at the selected speed to remove water via centrifugal force.
     
    1. Wait for Spin Completion - The machine will automatically stop after the timer runs out.
    2. Unload the Sample - Once the drum stops completely, open the lid and carefully remove the sample.
    3. Proceed to Drying - The dewatered sample can now be air-dried or placed in a drying oven or stenter.
      Safety Tips: - Always ensure the lid is closed before starting. - Do not open the lid while the drum is spinning. - Balance the load to prevent vibration or noise.     Laboratory Hydro Extractor dealer In Bangladesh, Lab Hydro Extractor Importer in Bangladesh, Laboratory Hydro  in Bangladesh, Lab Hydro  in Bd, Hydro Extractor Price in Bangladesh, Laboratory Hydro Extractor in Bangladesh,   Laboratory hydro Extractor Small Dehydrator Model: DUN-SD185 Brad: DUNLIN Origin: China Application scope of small dehydrator: This dehydrator is a kind of small sample dehydration experimental equipment with micro capacity Parameter specification: Inner barrel size: 185mm in diameter * 80Hmm Outer barrel size: ∮200*125Hmm Overall dimension: 290 * 220* 295Hmm Power supply: single phase 220 V / 50 Hz power: 60 W speed: 1800 R / min

    Laboratory hydro Extractor Machine Dunlin price in Bangladesh Laboratory hydro Extractor Machine Dunlin in textile Textile testing equipment in Bangladesh Textile testing equipment in Dhaka Textile testing equipment in Uttara MAAM tex Laboratory hydro Extractor Machine Dunlin price in Bangladesh

    Laboratory hydro Extractor
    Add to cart
    Quick view