New
Fabric air permeability tester
Watch video
360 product view
    Click to enlarge
    Digital Elmendorf tearing tester
    Digital Elmendorf tearing tester $0.00
    Back to products
    Fabric Drape Tester
    Fabric drape tester $0.00

    Fabric air permeability tester

    $0.00

    Fabric Air Permeability Tester
    Fabric air permeability tester

    Fabric air permeability tester

     

    Fabric Air Permeability Tester is a lab instrument used to measure how easily air passes through a fabric. It quantifies the air permeability, which is crucial for evaluating breathability, comfort, and functional performance in textiles.

    Purpose Fabric Air Permeability Tester:

    It determines the rate of airflow through a fabric sample under a set air pressure, typically reported in units like cm³/cm²/s or L/m²/s.

    Working Principle:

    The tester creates a pressure difference across the fabric sample and measures the volume of air flowing through it. Higher air permeability means the fabric is more breathable.

    Main Components of Fabric Air Permeability Tester:

    – Test Head / Clamp: Holds the fabric securely without leakage.

    – Pressure Regulator: Maintains a constant air pressure during testing.

    – Flow Meter or Digital Sensor: Measures the actual airflow rate through the fabric.

    – Display Unit: Shows readings of air permeability instantly.

     

    Applications of Fabric Air Permeability Tester:

    – Performance textiles (sportswear, PPE)

    – Technical fabrics (filters, tents, airbags)

    – Medical textiles (masks, gowns)

    – Nonwovens and industrial materials

     

    Benefits of Fabric Air Permeability Tester:

    1. Accurate Breathability Measurement – Precisely measures how breathable a fabric is, essential for comfort and performance.
    2. Supports Quality Control – Ensures consistent air permeability in fabric batches, critical for products like PPE, sportswear, and filters.

     

    1. Enhances Product Design – Helps in selecting or engineering fabrics with the right airflow properties for specific uses.
    2. Standard Compliance – Conforms to international testing standards (e.g., ASTM D737, ISO 9237), ensuring global credibility.
    3. Quick and Reliable Testing – Provides rapid results, increasing lab efficiency and production decision-making speed.

     

    1. Wide Material Compatibility – Suitable for woven, nonwoven, knitted fabrics, and even paper or coated materials.
    2. Improves Functional Performance – Helps optimize products for ventilation, moisture control, and thermal comfort.
    3. Reduces Product Failure – Identifies underperforming fabrics early, minimizing risks in high-performance applications.

    Features of Fabric Air Permeability Tester:

    1. Digital Display – Shows air permeability readings clearly in units like L/m²/s or cm³/cm²/s.
    2. Precise Test Head/Clamp – Provides an airtight seal to prevent air leakage and ensure accurate results.
    3. Adjustable Pressure Settings – Allows testing under various pressure drops (e.g., 10–2500 Pa), depending on fabric type.

     

    1. Automatic Airflow Measurement – Built-in sensors or flow meters capture airflow rate automatically for quick analysis.
    2. Multiple Test Area Sizes – Interchangeable test plates to match different sample sizes and standard requirements.
    3. Data Logging and Export – Some models include USB or software connectivity for storing and exporting test results.

     

    1. Standard Compliance – Conforms to ASTM D737, ISO 9237, BS 5636, DIN 53887, etc.
    2. Robust Construction – Built with corrosion-resistant materials and durable components for long-term lab use.
    3. Low Maintenance – Simple cleaning and calibration process for reliable performance.
    4. Compact and User-Friendly Design – Ideal for lab benches and easy operation with minimal training.

    How to Use Fabric Air Permeability Tester:

    1. Prepare the Sample – Cut the fabric sample to the required size (usually circular, e.g., 20 cm²).
    2. Mount the Sample – Place the fabric securely in the test clamp or holder, ensuring no wrinkles or gaps.
    3. Set Test Parameters – Adjust the air pressure drop according to the fabric type or standard (e.g., 100 Pa).

     

    1. Start the Test – Turn on the air supply and start the airflow through the fabric.
    2. Read the Measurement – The digital display will show the air permeability value in the selected units.
    3. Record the Results – Note the readings or export data if the device supports it.
    4. Repeat if needed – Test multiple samples or areas for accuracy and average the results.
    5. Clean and Maintain – After testing, clean the clamp and ensure the device is calibrated regularly.

     

    Tip: Ensure the test environment maintains standard temperature and humidity for consistent results.

     

    Fabric Air Permeability Tester

    Appliance Range
    It is used to TEST the air permeability of various textile fabrics, including industrial fabrics, nonwoven fabrics and other textile products and other breathable materials.
    Related Standards
    GB / T 5453, GB / T 13764, ISO 9237, ISO 5636, ASTM D737, etc.

    Instrument characteristics
    1. Automatic sample clamping, automatic nozzle replacement, and quick test.
    2. Microcomputer processing, the test results are displayed directly, without manual table calculation;
    3. Built-in continuous test mode, the test unit can be switched as needed.
    4. Chinese LCD menu operation, configure computer interface.

    Technical parameter
    1. Range of sample pressure difference: 1 ～ 4000Pa
    2. Measurable air permeability: 1 ～ 40,000mm / s
    3. Measurement error: ≤ ± 2%
    4. Measurable fabric thickness: ≤8mm
    5. Test area: 5cm2; 20cm2; 50cm2; 100cm2
    Ф50mm (≈19.6cm2)
    Ф70mm (≈38.5cm2)

    6. Nozzles: 11 in total (automatic replacement of digital setting)
    CODE 00 01 02 03 04 05 06 07 08 09 10
    DIAφ（mm）
    0.8 1.2 2 3 4 6 8 10 12 16 20
    7.Data Capacity:≤200 times tests
    8.Power Supply：AC220V 50Hz 2KW
    9.Weight：80Kg
    10.Shape：1250×700×1250mm

    Categories: , Tags: , , , Brand: ,
    Description

      Shipping & Delivery

      Related products

      Laboratory Hydro Extractor
      Laboratory Hydro Extractor

      Laboratory hydro Extractor

      $0.00

      Laboratory Hydro Extractor

      Laboratory Hydro Extractor

      Laboratory Hydro Extractor

        A Laboratory Hydro Extractor is a compact, high-speed centrifuge used in textile labs to remove excess water from fabric or yarn samples after dyeing or washing. It works on the principle of centrifugal force, efficiently reducing moisture content before drying. Key Features:
      1. Centrifugal Water Extraction - Uses high-speed spinning (typically 1400–2800 RPM) to extract water from textiles.
      2. Stainless Steel Inner Basket - Perforated drum holds fabric/yarn securely and allows water to drain efficiently.
       
      1. Compact Lab Design - Space-saving unit designed specifically for laboratory sample sizes.
      2. Digital Timer and Speed Control - Allows precise setting of spin duration and RPM to match sample needs.
      3. Safety Lock System - Ensures the lid remains closed during operation for user safety.
       
      1. Quick Water Removal - Significantly reduces drying time by extracting up to 90–95% of water content.
      2. Low Noise and Vibration - Balanced design ensures quiet and stable operation.
        Applications: - Dewatering of dyed or washed fabric/yarn lab samples. - Pre-drying step in dyeing and finishing tests. - Useful in textile, apparel, and dyeing labs for faster workflow.   Benefits of Laboratory Hydro Extractor:
      1. Efficient Water Removal - Rapidly extracts 90–95% of water from samples, reducing drying time significantly.
      2. Saves Time and Energy - Cuts down the load on dryers and shortens total processing time in lab workflows.
      3. Improves Sample Quality - Gentle spinning preserves fabric structure, avoiding damage or distortion.
       
      1. Precise Control - Adjustable speed and timer ensure optimal settings for different fabric types.
      2. Compact and Lab-Friendly - Small footprint ideal for laboratory use with limited space.
      3. User Safety - Safety lock prevents lid opening during operation, protecting the user.
      4. Cost-Effective - Reduces the need for extended dryer use, saving on electricity and equipment wear.
       
      1. Versatile Use - Suitable for yarn, fabric, and garment samples across various fiber types.
      Features of Laboratory Hydro Extractor:  
      1. High-Speed Centrifugal Operation - Typically runs at 1400–2800 RPM for quick and efficient water removal.
      2. Stainless Steel Inner Drum - Corrosion-resistant, perforated basket for durability and efficient water drainage.
      3. Digital Timer and Speed Control - Allows precise control of spin duration and speed based on sample type.
       
      1. Compact and Portable Design - Ideal for lab environments with limited space.
      2. Safety Lock Mechanism - Prevents the lid from opening while the machine is in operation.
      3. Shock Absorption System- Reduces vibration and noise for smooth, stable performance.
       
      1. Quick Cycle Times - Short dewatering cycles improve lab throughput and efficiency.
      2. Low Maintenance Design - Simple mechanical setup with easy-to-clean components.
      3. Sample Versatility - Suitable for small fabric swatches, yarns, and small garments.
      4. Energy Efficient - Uses minimal power while delivering high performance.
      How to Use a Laboratory Hydro Extractor:
      1. Prepare the Sample - After dyeing or washing, gently squeeze excess water from the fabric or yarn sample by hand.
      2. Load the Sample - Open the lid and place the sample evenly in the stainless steel drum. - Avoid overloading or uneven placement to maintain balance.
       
      1. Close the Lid securely - Ensure the safety lid is properly closed and locked.
      2. Set the Timer and Speed - Use the control panel to set the spin time (typically 1–5 minutes) and RPM suitable for the sample type.
      3. Start the Machine- Press the start button. The extractor will spin at the selected speed to remove water via centrifugal force.
       
      1. Wait for Spin Completion - The machine will automatically stop after the timer runs out.
      2. Unload the Sample - Once the drum stops completely, open the lid and carefully remove the sample.
      3. Proceed to Drying - The dewatered sample can now be air-dried or placed in a drying oven or stenter.
        Safety Tips: - Always ensure the lid is closed before starting. - Do not open the lid while the drum is spinning. - Balance the load to prevent vibration or noise.     Laboratory Hydro Extractor dealer In Bangladesh, Lab Hydro Extractor Importer in Bangladesh, Laboratory Hydro  in Bangladesh, Lab Hydro  in Bd, Hydro Extractor Price in Bangladesh, Laboratory Hydro Extractor in Bangladesh,   Laboratory hydro Extractor Small Dehydrator Model: DUN-SD185 Brad: DUNLIN Origin: China Application scope of small dehydrator: This dehydrator is a kind of small sample dehydration experimental equipment with micro capacity Parameter specification: Inner barrel size: 185mm in diameter * 80Hmm Outer barrel size: ∮200*125Hmm Overall dimension: 290 * 220* 295Hmm Power supply: single phase 220 V / 50 Hz power: 60 W speed: 1800 R / min

      Laboratory hydro Extractor Machine Dunlin price in Bangladesh Laboratory hydro Extractor Machine Dunlin in textile Textile testing equipment in Bangladesh Textile testing equipment in Dhaka Textile testing equipment in Uttara MAAM tex Laboratory hydro Extractor Machine Dunlin price in Bangladesh

      Laboratory hydro Extractor
      Add to cart
      Quick view
      Rainin Digital Pipette
      Rainin Digital Pipette

      Rainin Digital Pipette

      ,
      $0.00

       Rainin Digital Pipette

      Rainin Digital Pipette

      Digital Pipette

        Rainin Digital Pipette E4-XLS Electronic Pipette,   The Rainin Digital Pipette is a high-precision liquid handling instrument used in laboratories for accurate and reproducible measurement and transfer of small liquid volumes. Manufactured by Rainin Instruments (a Mettler Toledo company), these pipettes are known for their ergonomic design, reliability, and advanced digital controls.   Features of Rainin Digital Pipette:
      1. Digital Volume Setting
      - Allows for precise and repeatable volume adjustments via a digital display or dial. - Reduces user error compared to manual pipettes.
      1. High Accuracy and Precision
      - Offers minimal variability in volume delivery, making it ideal for sensitive assays and experiments.  
      1. Ergonomic Design
      - Lightweight and comfortable to use over long periods, reducing hand strain (good for repetitive tasks). - Often features a finger hook and low pipetting force.
      1. Easy Calibration and Maintenance
      - Includes software or manual options for calibration. - Designed for easy disassembly and cleaning.
      1. Durable and Chemically Resistant - Built with high-quality materials that resist damage from chemicals and frequent use.
      2. Models and Volume Ranges - Available in single-channel and multi-channel versions.
      Covers a wide volume range from 0.1 µL to 10 mL depending on the model.  
      1. LTS (LiteTouch System) - Many Rainin pipettes use the LTS tip system which reduces tip ejection force and ensures a consistent seal.
      2. Compliance and Traceability - Some digital models offer data storage or integration with lab information systems for traceability.
      Applications - Molecular biology - Microbiology - Clinical diagnostics - Pharmaceutical and chemical research   Benefits of Rainin Digital Pipette:
      1. High Accuracy and Precision - Ensures reliable and reproducible results, essential for sensitive experiments.
      2. Digital Volume Control - Reduces human error with easy and precise volume setting via digital interface.
       
      1. Ergonomic Design- Minimizes hand strain and fatigue during prolonged use; ideal for repetitive pipetting tasks.
      2. LiteTouch System (LTS) - Eases tip attachment and ejection, reducing risk of RSI (Repetitive Strain Injury) and improving comfort.
       
      1. Versatile Volume Range - Available in multiple models to handle volumes from microliters to milliliters.
      2. Durable and Reliable - Built with high-quality materials for long life and resistance to chemicals and frequent use.
       
      1. Easy Maintenance and Calibration - Simplified calibration and cleaning ensure long-term performance and compliance.
      2. Data Integrity and Traceability -Some models store data, supporting audit trails and regulatory compliance.
      3. Enhanced Productivity - Quick setup, easy operation, and consistent performance speed up lab workflows.
        Features of Rainin Digital Pipette:
      1. Digital Volume Adjustment - Precise and easy-to-read digital display for accurate volume setting.
      2. High Precision and Accuracy- Delivers consistent results, meeting ISO and GLP/GMP standards.
      3. Ergonomic Design- Lightweight, balanced with low plunger and tip ejection force to reduce fatigue.
       
      1. LiteTouch Tip Ejection System (LTS) - Reduces tip attachment/ejection force, improving comfort and consistency.
      2. Durable Construction - Built with high-quality, chemically resistant materials for long-term use.
      3. Wide Volume Range - Available in multiple models from 0.1 µL to 10 mL.
      4. Single-Channel and Multi-Channel Options - Suitable for various applications including high-throughput assays.
      5. Autoclavable Components- Some parts can be autoclaved for sterilization and contamination control.
       
      1. Easy Calibration and Maintenance - User-friendly calibration settings with accessible parts for cleaning.
      2. Optional Electronic Models - Some versions include programmable features, multiple modes (e.g., reverse pipetting), and memory storage.
      Rainin Digital Pipette dealer In Bangladesh, Digital Pipette Importer in Bangladesh, Digital Pipette in Bangladesh, Digital Pipette Machine in Bd, Digital Pipette In Uttara, Digital Pipette Price in Bangladesh, Digital Pipette Supplier in Bangladesh, Digital Pipette in Bangladesh,  
      Add to cart
      Quick view
      Laboratory tenter

      Laboratory tenter

      $0.00

      Laboratory Tenter

      Laboratory tenter

      laboratory mini tenter

        A Laboratory Tenter (or Lab Stenter) is a small-scale version of an industrial tenter machine used in textile finishing. It is designed for heat-setting, drying, and finishing of fabric samples under controlled conditions in textile testing labs or R&D departments.   Key Features:
      1. Heat-Setting and Drying - Simulates the process of setting fabric dimensions and applying finishes using controlled temperature and tension.
      2. Fabric Width Control - Uses clips or pins on chains or rails to hold fabric edges and stretch them to desired width, just like in full-size tenters.
       
      1. Adjustable Temperature and Speed - Digital controls allow precise setting of drying/curing temperature and conveyor speed to match production conditions.
      2. Compact Design - Bench-top or floor-standing units suitable for labs with limited space.
      3. Transparent Viewing Chamber - Allows visual inspection of fabric behavior during processing.
       
      1. Versatile Application Range - Can process woven, knitted, and nonwoven fabrics of various compositions (cotton, polyester, blends, etc.).
      Applications: - Heat-setting of synthetic fabrics like polyester. - Drying after dyeing, printing, or chemical treatment. Dimensional stability testing (shrinkage/elongation). - Finish evaluation (e.g., softness, stiffness, water repellency). - Process optimization before bulk production.   Benefits of Laboratory Tenter:
      1. Accurate Simulation of Production - Replicates industrial finishing processes for reliable lab-scale testing and development.
      2. Improves Fabric Quality- Allows precise control of heat and tension, optimizing fabric properties like shrinkage, dimensional stability, and hand feel.
       
      1. Cost-Effective - Enables process trials and fabric development without using full-scale production equipment.
      2. Speeds Up R&D - Facilitates quick testing and adjustment of settings for new fabric styles or finishes.
      3. Versatile Applications - Suitable for drying, heat-setting, finishing, and evaluating different types of fabrics and treatments.
       
      1. Space-Efficient - Compact design fits easily into textile labs or sample rooms.
      2. Energy Efficient- Uses less power than industrial machines, ideal for small-scale and repeated testing.
      3. Process Control and Reproducibility- Digital controls ensure consistent and repeatable results, aiding in quality assurance and product development.
       
      1. Enhances Safety - Built with lab use in mind, featuring insulation and safety systems to protect users.
        Features of Laboratory Tenter:
      1. Precise Temperature Control - Digital temperature setting (typically up to 220–250°C) for accurate heat-setting and drying.
      2. Adjustable Fabric Width - Equipped with clip or pin chains to hold and stretch fabric across the width, simulating real stentering.
       
      1. Variable Conveyor or Chain Speed- Adjustable speed to control fabric dwell time during processing.
      2. Compact and Lab-Friendly Design - Designed for bench-top or small floor space use in textile labs.
      3. Transparent Chamber Window - Allows monitoring of fabric behavior during treatment.
      4. Digital Display and Control Panel - Easy operation for setting temperature, speed, and time.
       
      1. Uniform Heat Distribution- Ensures even treatment across the fabric width for accurate testing.
      2. Stainless Steel Construction - Durable, corrosion-resistant body for long-term use at high temperatures.
      3. Safety Features - Includes over-temperature protection, insulated body, and emergency stop functions.
      4. Sample Versatility - Suitable for various fabric types (woven, knit, synthetic, blends) and lab finishing tasks.
        Laboratory Mini tenter Dryer dealer In Bangladesh, Lab Mini tenter Dryer Importer in Bangladesh, Mini tenter Dryer in Bangladesh, Laboratory tenter Dryer in Bd, Lab tenter Dryer In Uttara, Lab tenter Price in Bangladesh, Laboratory tenter Dryer in Bangladesh, Laboratory Mini Dryer in Bangladesh,     Continuous Tenter Laboratory tenter
      Laboratory tenter

      laboratory mini tenter

      Used for continuous drying, curing , and thermo setting process , etc .Instead of tradition oven, can output sample more quick and flat, save a lot of time and increase efficiency. adjustable of feeding & setting separately . Simulating the production onsite to continuous drying. Laboratory Dyeing and Finishing Machine Laboratory tenter Continuous Tenter Machine Dunlin price in Bangladesh Laboratory tenter Continuous Tenter Machine Dunlin in textile Textile testing equipment in Bangladesh Textile testing equipment in Dhaka Textile testing equipment in Uttara MAAM tex Laboratory tenter Continuous Tenter Machine Dunlin price in Bangladesh
      Add to cart
      Quick view
      Steam Soaping Machine
      Steam Soaping Machine

      Steam Soaping machine

      $0.00
      Steam Soaping Machine

      Steam Soaping Machine

      Steam Soaping Machine

      A Steam Soaping Machine is a specialized laboratory apparatus used in textile dyeing processes, particularly for post-dyeing treatments like soaping, which enhances color fastness and removes unfixed dyes from fabric samples. This machine is designed to perform soaping treatments on dyed textile samples using steam. Soaping is a critical step in dyeing, especially for reactive dyes, as it removes unfixed dye particles, ensuring better color fastness and preventing dye bleeding. The steam soaping process involves treating the dyed fabric with a soaping solution at elevated temperatures, facilitated by steam, to achieve optimal results. ⚙️ Key Features of Steam Soaping Machine - Beaker Material: Constructed with high-grade 316L stainless steel for excellent corrosion resistance and durability.- Operation Modes: Offers both automatic control and manual water filling options, providing flexibility in operation. - Drainage System: Equipped with an automatic drainage device for efficient removal of used solutions.- Temperature Control: Precise temperature regulation to maintain optimal soaping conditions.- Compact Design: Suitable for laboratory settings, occupying minimal space while delivering effective performance. ✅ Benefits of  Steam Soaping Machine - Enhanced Color Fastness: Effectively removes unfixed dyes, resulting in improved wash and rub fastness of the fabric.- Efficient Processing: Reduces the time required for post-dyeing treatments compared to conventional methods.- Consistent Results: Provides uniform treatment across samples, ensuring reproducibility in testing and quality control.- Resource Optimization: Minimizes water and chemical usage through controlled processing parameters.- Versatility: Applicable to various fabric types and dye classes, making it a valuable tool in research and development. Typical Applications - Laboratory Testing: Used in dyeing laboratories for evaluating the fastness properties of dyed samples. - Research and Development: Assists in developing and optimizing dyeing processes and formulations. - Quality Control: Ensures that dyed fabrics meet specified fastness standards before bulk production. In summary, a Steam Soaping Machine is an essential laboratory instrument in the textile industry, facilitating efficient and effective post-dyeing treatments to enhance the quality and durability of dyed fabrics. Features of Steam Soaping Machine:
      1. High-Grade Stainless Steel Beakers - Made from 316L stainless steel for excellent chemical and heat resistance.
      2. Steam-Based Heating - Uses direct or indirect steam to maintain consistent high temperatures ideal for soaping.
      1. Precise Temperature Control - Maintains stable temperatures (typically up to 98–100°C) for effective removal of unfixed dyes.
      2. Automatic and Manual Modes - Offers both programmable automatic cycles and manual operation for flexibility.
       
      1. Beaker Agitation or Rotation - Ensures uniform soaping action across fabric surfaces.
      2. Automatic Drainage System - Efficiently removes used soaping solution to speed up cycle changeovers.
      1. Compact Design - Fits well in lab settings while allowing multiple samples to be processed simultaneously.
      2. Safety Features - Includes pressure and temperature protection systems to ensure safe operation.
       
      1. Low Water and Chemical Use - Designed for minimal liquor ratios, enhancing sustainability.
      2. User-Friendly Interface - Simple digital controls or touch panel for easy operation and cycle programming.
      How to Use a Steam Soaping Machine:
      1. Prepare the Dyed Sample - After dyeing, rinse the fabric to remove surface dye and prepare it for soaping.
      2. Load the Fabric - Place the dyed fabric or sample into the beakers or holders inside the machine.
      1. Add Soaping Solution - Pour the prepared soaping agent (usually a detergent solution) into the beakers or tank as per recipe.
      2. Set Parameters
      - Use the control panel to set: - Temperature (usually 95–98°C) - Soaping time (typically 10–20 minutes) - Steam mode (direct or indirect, if applicable)  
      1. Start the Cycle - Begin the soaping process. The machine will heat the solution using steam and agitate/rotate the beakers for even treatment.
      1. Drain and Rinse - After the cycle ends, the machine may auto-drain. Rinse the fabric with warm water to remove residual chemicals.
      1. Unload the Samples - Carefully remove the fabric. Inspect for evenness and color fastness improvement.
      2. Clean the Machine - Rinse and dry the beakers or tank to maintain hygiene for the next use.
        Safety Tips: - Wear gloves and goggles. - Do not open the lid during operation. - Ensure steam connections are secure.       Steam Soaping machine used for sample soaping after dyeing in laboratory Beaker material: 316L S/S automatic control / manual filling water device, with automatic drainage device. Steam Soaping machine Dunlin price in Bangladesh Steam Soaping machine Dunlin in textile testing equipment Textile testing equipment in Bangladesh Textile testing equipment in Dhaka Textile testing equipment in Uttara MAAM tex Steam Soaping machine Dunlin price in Bangladesh
      Add to cart
      Quick view
      Pantone Book

      Pantone book

      ,
      $0.00

      Pantone Book

      Pantone Book

      Pantone Book

        A Pantone Book, commonly referred to as a Pantone Color Guide, is a professional color matching tool used across industries like graphic design, fashion, printing, packaging, and product manufacturing. It helps ensure consistent color communication from design to final production.   What It Does? - Displays standardized Pantone colors in fan-deck or chip book format. - Provides color codes, ink formulas, and finish types for accurate color replication.     Types of Pantone Books:
      1. Formula Guide (Solid Coated & Uncoated) – For spot color printing.
      2. Color Bridge – Shows Pantone spot colors alongside CMYK equivalents.
      3. Pantone Fashion, Home + Interiors (FHI) – For textiles, soft goods, and home decor.
      4. Pantone CMYK and Pastels & Neons Guides – For process printing and special effect colors.
        ⚙️ Features of Pantone Book: - Thousands of pre-defined colors. - Ink mixing formulas (for printers). - Available in coated, uncoated, and matte finishes. - Some include digital tools or access to Pantone Connect software.   ✅ Benefits of Pantone Book: - Ensures accurate color matching across designers, clients, and manufacturers. - Supports branding consistency across all printed and physical materials.   key benefits of using a Pantone Book: ✅ 1. Accurate Color Communication- Ensures consistent color matching between designers, printers, and manufacturers—globally. ✅ 2. Industry Standard- Trusted across printing, fashion, packaging, and branding for reliable color references.   ✅ 3. Saves Time and Reduces Errors - Eliminates guesswork in color approval, helping avoid costly reprints or corrections. ✅ 4. Versatile Applications - Supports multiple media types: print, fabric, plastics, digital design, etc. ✅ 5. Real-World Color View - Physical swatches show true ink or dye appearance, which digital screens can’t replicate accurately.   ✅ 6. Ink Mixing Formulas - Provides exact mixing guides for printers to replicate spot colors precisely. ✅ 7. Global Consistency - Helps maintain brand color consistency across international production sites.   key features of a Pantone Book: 1. Standardized Color System - Includes thousands of pre-defined Pantone Matching System (PMS) colors with unique codes. 2. Multiple Finish Types - Available in Coated (C), Uncoated (U), Matte (M) formats to match different printing surfaces.   3. Fan Deck or Chip Format - Comes in portable fan-deck or tear-away chip books for easy reference and sharing. 4. Ink Mixing Formulas - Provides precise ink formulas for each color, ideal for print production. 5. Specialized Editions - Guides tailored for graphic design, textiles (FHI), plastics, and digital design.   6. Cross-Media Consistency - Ensures uniform color across print, web, fabric, and packaging. 7. Digital Integration - Many books include access to Pantone Connect for digital workflow and color data sync.   Here’s a simple guide on how to use a Pantone Book effectively: ✅ 1. Choose the Right Pantone Book - Use Formula Guide for print. - Use FHI (Fashion, Home + Interiors) for textiles. - Use Color Bridge to compare spot colors with CMYK.   ✅ 2. Select the Color - Flip through the fan deck or chip book to find the desired color. - Note the Pantone code (e.g., Pantone 186 C for coated paper). ✅ 3. Communicate the Code - Share the Pantone number with printers, manufacturers, or team members to ensure consistent color use.   ✅ 4. Use the Right Finish - Make sure you're referencing coated, uncoated, or matte depending on your final material. ✅ 5. Compare to Printed Proofs - Use the physical Pantone swatch to check if print proofs or samples match. ✅ 6. Maintain Lighting Consistency - View colors under standard lighting (D50) for accurate color judgment.   ✅ 7. Store Properly - Keep the Pantone book in a cool, dry place and replace it every 12–18 months to avoid fading.   Pantone offers a diverse range of color guides tailored to various industries and applications. Here's an overview of the main Pantone book models:     Pantone Graphics & Print Guides  
      1. Formula Guide (Solid Coated & Uncoated)
      - Features over 2,390 spot colors with corresponding ink formulations. - Essential for branding, packaging, and print design. - Provides accurate color matching for solid colors.  
      1. Color Bridge Guide (Coated & Uncoated)
      - Displays side-by-side comparisons of Pantone spot colors and their closest CMYK equivalents. - Includes CMYK, RGB, and HEX values for digital and print consistency. - Ideal for projects requiring color translation across different media.  
      1. CMYK Guide (Coated & Uncoated)
      - Contains a comprehensive range of CMYK colors. - Useful for four-color process printing without spot colors. - Helps in selecting colors achievable through standard CMYK printing.  
      1. Pastels & Neons Guide
      - Offers a collection of soft pastel and vibrant neon colors. - Suitable for creative projects in fashion, print, and packaging. - Provides unique color options for special design applications.  
      1. Metallics Guide
      - Features metallic spot colors for premium print finishes. Ideal for luxury packaging, branding, and high-end print materials. - Adds a sophisticated touch to printed designs.   Pantone Fashion, Home + Interiors (FHI) Guides
      1. FHI Color Guide (TPG – Paper)
      - Contains a wide range of colors for non-fabric materials. - Used in product design, cosmetics, and interiors. - Provides color inspiration for various applications.  
      1. FHI Cotton Passport & Cotton Planner (TCX – Textile)
      - Offers colors on cotton fabric swatches. - Essential for textile and apparel design. - Ensures accurate color communication in fabric production.  
      1. FHI Polyester Swatch Book
      - Includes colors on polyester fabric. - Useful for sportswear, footwear, and synthetic textiles. - Provides color options specific to polyester materials.   Pantone Specialty Guides  
      1. Pantone SkinTone Guide
      - Features a range of skin tone colors. - Used in cosmetics, healthcare, and product development. - Aids in creating products that match diverse skin tones.  
      1. Pantone Plastic Standard Chips
      - Provides color references on plastic substrates. - Essential for industrial design, consumer electronics, and appliances. - Ensures color accuracy in plastic product manufacturing.   Pantone Bundles & Studio Sets   - Portable Guide Studio - A comprehensive set including multiple Pantone guides. - Designed for professionals needing a wide range of color references. - Convenient for on-the-go color selection and matching.   - Essentials Set - Combines key Pantone guides into one package. - Ideal for designers seeking a versatile color toolkit. - Offers a cost-effective solution for comprehensive color needs.   Each Pantone guide serves specific purposes across different industries. Selecting the appropriate guide depends on your project's requirements and the materials involved.
      Pantone Book

      Pantone Book

       
      Add to cart
      Quick view
      Fabric Flame Retardant Tester

      Fabric flame retardant tester

      ,
      $0.00
      Fabric Flame Retardant Tester
      Fabric Flame Retardant Tester

      Fabric Flame Retardant Tester

        A Fabric Flame Retardant Tester is a specialized laboratory instrument designed to evaluate the flammability characteristics of textiles. It assesses how fabrics react to direct flame exposure, measuring parameters such as ignition time, flame spread rate, after-flame duration, and afterglow time. This testing is crucial for ensuring that textiles meet safety standards for various applications, including apparel, home furnishings, and industrial uses.   Purpose and Applications The primary purpose of a Fabric Flame Retardant Tester is to determine the flame resistance of textile materials. This is essential for:- Apparel Safety: Ensuring garments, especially children's sleepwear and industrial work wear, meet flammability standards. - Home Textiles: Testing curtains, drapes, upholstery, and bedding for fire safety compliance. - Technical Textiles: Evaluating materials used in tents, protective clothing, and automotive interiors.   ⚙️ Key Features Modern Fabric Flame Retardant Testers incorporate several features to ensure accurate and reliable testing:- Adjustable Burner Angles: Allowing tests at various orientations (e.g., 0°, 45°, 90°) to simulate different real-world scenarios. Automated Ignition Systems: Providing consistent flame application and reducing operator variability. - Digital Timing Mechanisms: Accurately recording ignition time, flame spread, after-flame, and afterglow durations.   - Transparent Observation Windows: Enabling safe monitoring of the test without exposure to hazards. - Compliance with International Standards: Meeting protocols such as ASTM D6413, ISO 6941, and EN ISO 15025 for standardized testing procedures.   Testing Standards Fabric Flame Retardant Testers are designed to comply with various international standards, including: - ASTM D6413: Standard Test Method for Flame Resistance of Textiles (Vertical Test). - ISO 6941: Textiles — burning behavior — Measurement of flame spread properties of vertically oriented specimens. - EN ISO 15025: Protective clothing — Protection against heat and flame — Method of test for limited flame spread.   ️ How It Works
      1. Sample Preparation: A fabric specimen is cut to specified dimensions and conditioned as per standard requirements.
      2. Mounting: The sample is mounted vertically or at a specified angle in the testing chamber.
      3. Ignition: A controlled flame is applied to the fabric for a predetermined time.
      4. Observation: The tester records ignition time, flame spread, after-flame time, and afterglow time.
      5. Evaluation: Results are compared against standard criteria to determine compliance.
          ✅ Benefits - Safety Assurance: Ensures textiles meet fire safety regulations, reducing risk in end-use applications. - Quality Control: Identifies flammability issues during the manufacturing process. - Regulatory Compliance: Helps manufacturers meet legal requirements for flammability. - Product Development: Assists in developing flame-retardant materials for specialized applications.   For more detailed information on specific models and their features, you can refer to manufacturers like SDL Atlas's Auto Flam Flammability Tester [1], TESTEX's Vertical Flammability Chamber TF312   How to Use a Fabric Flame Retardant Tester (Vertical Flammability Test Method):
      1. Prepare the Sample
      - Cut the fabric to standard dimensions (usually 300 × 75 mm). - Condition the fabric for 24 hours at 21°C and 65% relative humidity.  
      1. Mount the Sample
      - Place the fabric vertically in the frame inside the test chamber. - Ensure it's held securely with no folds or slack.  
      1. Set Up the Burner Position the burner at the required angle (usually 90° for vertical tests).
      - Adjust flame size according to the standard (about 38 mm for ASTM D6413).
      1. Ignite the Flame - Apply the flame to the bottom edge of the fabric for 12 seconds.
       
      1. Observe and Measure - Start timing when flame is applied.
      - Measure: - After-flame time (how long it burns after flame removal) - After-glow time (how long it glows after burning stops) - Char length (distance burned vertically)  
      1. Record the Results
      - Repeat the test on multiple samples (usually 5) and calculate averages.  
      1. Compare with Standards
      - Evaluate whether the results meet the required flame resistance limits.     fabric flame retardant tester IV type (small 450 method) Scope of application It is used for testing the intensity and speed of burning of flammable textile materials after ignition. (specific ignition nozzles and sample holders can be customized to meet multiple criteria). Related standards GB/T14644 ASTM D1230 CFR1610 etc. Technical parameters 1. The spread of time:0 ~ 999.9S resolution 0.1S 2. The temperature inside the box shows:Room temperature -99 degrees C resolution 1 c 3. Igniting time:1S 4. Type of igniter:4 1/2 syringe 5. Sample clip size:Outer frame:204mm * 78mm inner frame:152mm×38mm 6. Distance from the top of the igniter to the sample surface:8mm 7. Studio size and outline size Studio size:370mm×220mm×350mm Outline size:375mm×245mm×478mm 8. Power supply:AC220V 50Hz 20W 9. Weight:18Kg  
      Add to cart
      Quick view
      Counting Balance-Weighing Scale
      Counting Balance-Weighing Scale

      Counting Balance-Weighing Scale

      , ,
      $0.00

      Counting Balance-Weighing Scale

      Counting Balance-Weighing Scale

      Counting Balance-Weighing Scale

        A Counting Balance-Weighing Scale (or Counting Weighing Scale) is a precision electronic scale designed to weigh items and simultaneously count them based on individual piece weight. It’s commonly used in industries for inventory management, packaging, and quality control.   Purpose of Counting Balance-Weighing Scale: To quickly and accurately count small items like buttons, beads, screws, or pills by weight. Eliminates manual counting, especially for large quantities.   Working Principle of Counting Balance-Weighing Scale: Weigh a sample quantity of items to determine the average weight of one piece. Place a bulk quantity on the scale. The scale divides the total weight by the unit weight to calculate the total item count.     Applications of Counting Balance-Weighing Scale: Textile accessories (buttons, rivets) Hardware (nuts, bolts, washers) Electronics (resistors, chips) Pharmaceuticals (tablets, capsules) Benefits of Counting Balance-Weighing Scale:   Fast and Accurate Counting - Saves time by quickly counting large quantities of small items. Reduces Human Error- Eliminates mistakes common in manual counting. Improves Productivity - Speeds up packing, inventory, and quality control processes. Versatile Use - Suitable for various industries: textiles, hardware, pharmaceuticals, electronics.   Cost-Efficient- Reduces labor costs and improves operational efficiency. Compact and Portable - Easy to move and use in different workstations. Dual Functionality - Can be used for both counting and standard weighing. Memory and Tare Functions - Stores unit weights and allows container weight deduction.   Features of Counting Balance-Weighing Scale: High Precision Sensors- Ensures accurate weight and count, even for tiny components. Digital Display- Separate displays for total weight, unit weight, and piece count. Tare Function - Allows deduction of container weight for net measurements. Memory Function - Stores frequently used unit weights for fast recall.   Multiple Units Support- Measures in grams, kilograms, pounds, etc. Sample Size Selection- Users can set sample sizes (e.g., 10, 20, 50 pcs) to calculate piece weight. Overload Protection- Prevents damage from excessive weight. Auto Calibration - Maintains long-term accuracy with internal or external calibration options. Sturdy Platform- Stainless steel pan with anti-slip design for stable weighing. Battery and AC Operation- Can run on rechargeable batteries or power adapter.   How to Use Counting Balance-Weighing Scale: Turn On the Scale - Power it on and wait for the display to stabilize at zero. Tare the Container - Place an empty container on the pan and press the "TARE" button to zero out its weight. Set Sample Size - Place a known quantity (e.g., 10 or 20 pcs) of identical items on the scale. - Enter the sample quantity using the keypad. Confirm Unit Weight - The scale calculates and stores the average unit weight automatically. Add Bulk Items - Add the rest of the items into the container. - The display will show the total count based on the stored unit weight. Record Results   - Note down the total piece count and remove the items. Turn Off After Use - Power off the scale to save battery or electricity.     Counting Balance /Weighing Scale Model : DS610C Brand : DIGISCALE Origin : Germany Capacity : 3 kg Division : 0.1g Min Weight : 0.5g Grade : Class 3 Platter : 280 × 215mm Battery : Rechargeable Battery with AC Adaptor Display : Double Large LCD Display Warranty : One Year Service Warranty SPECIFICATION Build With 5 Measuring Units: kg, g, lb, oz, PCS Count Platter : 280 × 215mm Quality : Heavy Duty Premium Quality Product Net / Gross Weight : 3080g / 3130g Battery : Rechargeable Battery with AC Adaptor Battery Capacity: 6V 4.5Ah / 20 HR Adaptor Power Input : AC 220V-240V / 50Hz Adaptor Power Output : 10V DC/ 500mA Display : Double Large LCD Display Color : White-Gray Keyboard : 20 Members Key Operating Temperature : 0-40°C (32-104°F) FEATURES Auto Zero Tracking Automatic Overload Display Grade Class 3 Auto Backlight Double LCD Display Low Battery Indication Rechargeable Battery with Adaptor Save Electricity Advantage Piece Counting Functionality: The DS603C Counting Weighing Scale is prepared with an precise piece checking highlight, perfect for stock administration, generation lines, and quality control assignments. This guarantees you can tally things like screws, jolts, or other little components efficiently. High-Precision Digital Scale Display: The advanced scale show gives clear and precise readings, making it simple to screen weight and amount. Its shinning and natural interface guarantees ease of use in diverse lighting conditions. Digital Scale Calibration: To keep up exactness, the DS610C weighing scale calibration prepare is direct, guaranteeing the scale remains dependable over time. Normal weight scale calibration ensures reliable execution, indeed with overwhelming use. Durable and Reliable Build: The DS610C advanced weight scale is created with strong materials to withstand visit utilize in requesting situations, such as stockrooms and fabricating facilities. Versatility: As a weighing and tallying scale, it combines the benefits of weight estimation and piece tallying in one gadget. This makes it appropriate for a wide extend of applications, from retail to mechanical uses. Categories: Digital Scale and Balance, Piece Counting Scale, Table Top Scale
      Counting Balance-Weighing Scale

      Counting Balance-Weighing Scale

       
      Add to cart
      Quick view
      Controller For IR Dyeing Machine
      Color Matching Cabinet -light Box

      Controller For IR Dyeing Machine

      ,
      $0.00
      Controller For IR Dyeing Machine
      Controller For IR Dyeing Machine

      IR Dyeing machine controller

      Controller For IR Dyeing Machine offers exceptional quality .purchasing of our controller provides cost efficiencies, and customization options enabling you to meet your specific requirements comfortably. Collaborate with program A Controller for IR Dyeing Machine is a specialized control system designed to manage and automate the dyeing process in textile manufacturing, particularly using infrared heating technology. These controllers are crucial for achieving consistent dye quality, reducing energy consumption, and optimizing the dyeing process.   Key Features of an Controller For IR Dyeing Machine :
      1. Temperature Control:- Precisely regulates the infrared heaters to maintain uniform temperature across the dye bath. - Supports customizable heating curves (ramp-up, hold, and cool-down phases).
      2. Programmable Logic Control (PLC): - Allows operators to set and automate dyeing programs for different fabrics and dye types. - Supports multiple recipes or programs for different batches.
       
      1. Real-Time Monitoring and Feedback: - Monitors parameters like temperature, fabric rotation, bath circulation, and timing. - Provides real-time data and alarms for deviations.
      2. Touchscreen Interface / HMI (Human Machine Interface): - User-friendly interface for configuring and monitoring processes. - Multi-language support and graphical display of process curves.
       
      1. Data Logging and Traceability: - Records process data for quality control and traceability.
      2. Energy Efficiency Optimization: - Manages IR heater output to reduce energy usage. - Often includes features for auto shut-off or idle mode.
       
      1. Safety Features: - Includes emergency stop, over-temperature protection, and fault detection systems. 8. Connectivity: - Modern controllers may support Ethernet, Modbus, or other industrial communication protocols for integration into factory automation systems.
        Using A Controller For IR Dyeing Machine provides several benefits, especially in textile manufacturing where precision and efficiency are critical. Here are the key advantages:
      1. Improved Dyeing Accuracy and Consistency
      - Maintains precise temperature control and timing, ensuring uniform dye uptake across the fabric. - Reduces color variation between batches.  
      1. Enhanced Energy Efficiency- Infrared heating is more energy-efficient than traditional heating methods.- The controller optimizes energy use by adjusting the IR output based on process needs, reducing overall energy consumption.
       
      1. Time Savings- Faster heating and cooling cycles due to infrared technology.- Automated processes reduce manual intervention and cycle times. 4. Better Process Control- Programmable dyeing cycles and precise control over each stage (heating, dyeing, rinsing, cooling).- Real-time monitoring and adjustments improve reliability.
       
      1. Reduced Water and Chemical Usage- More efficient dye penetration and fixation mean less water and fewer chemicals are needed for reprocessing or corrections.6. Lower Operational Costs
      - Energy savings, reduced rework, and lower labor input contribute to cost efficiency. - Minimizes fabric damage, reducing material waste.  
      1. Enhanced Safety Built-in alarms, emergency shut-off and automatic fault detection enhance operational safety.8. Data Logging and Traceability- Ability to record and review dyeing process data helps in quality control and troubleshooting.- Facilitates compliance with industry standards and audits.
       
      1. User-Friendly Operation- Modern touchscreen interfaces make it easier for operators to manage and monitor processes.- Multilingual support and visual feedback enhance usability.
       
      Add to cart
      Quick view