Pneumatic bursting tester
360 product view
    Click to enlarge
    Oscillation Type Water Bath Dyeing Machine
    Oscillation type water bath Dyeing Machine $0.00
    Back to products
    Digital Elmendorf tearing tester
    Digital Elmendorf tearing tester $0.00

    Bursting strength tester

    $0.00

    Bursting strength tester

    Pneumatic bursting strength tester

    true burst

    Pneumatic bursting tester
    China national patent：ZL201210486480.8 ZL201220628425.3

    Pneumatic bursting strength tester
    China national patent：ZL201210486480.8 ZL201220628425.3
    [Scope of application]:
    It is used to measure the burst strength and burst expansion degree of various fabrics,
    including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other
    fabrics made by other processes, under standard conditions or wet conditions.

    This method is employed to assess the burst strength and degree of burst expansion of various types of fabrics, such as knitted, woven, non-woven, laminated, and others produced through different processes, under both standard and wet conditions.

    This technique is utilized to evaluate the burst strength and extent of burst expansion in various fabric types, including knitted, woven, non-woven, laminated, and others produced through diverse manufacturing processes, under both standard and wet conditions.

    Benefits of Bursting strength tester:

    Fast testing cycle for fast feedback to the production • Auto-start, a photocell detects the presence of a sample and automatically initiates a measurement sequence, thus allowing hands-free operation • Auto-cycling function permits the continuous cycling of the upper pressure foot to facilitate representative and continuous measurements

    • Available with automatic test strip feeder Measurements are simple to make with the Mullen type Bursting Strength Tester. Fast automatic measurements Measurement starts automatically once a test piece has been placed in the measuring gap. The clamping foot descends, and a bursting strength measurement is made.

    The sample is then quickly released and is ready for the next measurement at a new position. To maximize the sample measurement rate, the tester uses a minimum of time between the bursts, so that a series of 10 measurements can be done in less than 45 seconds. The actual measuring time depends of course on the type of paper or paper board being tested. Three

    Different test results can be reported after a single measurement; bursting strength standard, bursting strength compensated, and bursting energy absorption (BEA).Bursting strength tester can be compensated for the stiffness of the diaphragm For low bursting strength levels, the stiffness of the diaphragm can account for a large portion of the bursting strength value. If desired, the device can also measure, calculate, and report effective bursting strength compensated from the effects of the diaphragm.

    Measurement of Bursting Energy Absorption (BEA) is used to determine the energy absorption capability of a material. Strong, flexible paper has higher energy absorption values, while brittle, stiff paper has lower values. Bursting Strength Tester calculates and reports BEA according to the SCAN P 24 standard

    Related standards of Bursting strength tester:

    GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc.
    [Instrument characteristics]:
    1. Microcomputer control, automatic burst test, automatic correction, automatic data
    processing, and output results in the form of experimental report.
    2. Aerodynamics, high cleanliness.
    3. Color touch screen interface, Chinese and English menu operation, support online
    communication.

    1. Bursting pressure can reach up to 1.2MPa
      5. The maximum burst and expansion degree can reach 70mm.
      6. Strengthen the lighting system on the test surface.
      7. The main aerodynamic force helps to clamp the sample system.
      8. A variety of test areas are available, and the switching is easy.
    2. A variety of unit conversions between Chinese and English.
      10. Reliable anti-pinch safety protection design.
      [Technical parameter]:
      1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized)
      2. The minimum graduation value: 0.0001Mpa
      3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree
      pressurization.

    4. Test accuracy: ≤±0.2%F·S
    5. Thickness of elastic diaphragm: ≤2mm
    6. Testing area: cm²） 100 50 10 7.3 Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5
    7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min
    8. Safety cover: high-transparent plexiglass
    9. Power supply: AC220V±10% 50Hz 800W
    10. Dimensions: (470×490×780)mm (host L×W×H)

    Categories: , Tags: , , , Brand:
    Shipping & Delivery

    Related products

    Steam Soaping Machine
    Steam Soaping Machine

    Steam Soaping machine

    $0.00
    Steam Soaping Machine

    Steam Soaping Machine

    Steam Soaping Machine

    A Steam Soaping Machine is a specialized laboratory apparatus used in textile dyeing processes, particularly for post-dyeing treatments like soaping, which enhances color fastness and removes unfixed dyes from fabric samples. This machine is designed to perform soaping treatments on dyed textile samples using steam. Soaping is a critical step in dyeing, especially for reactive dyes, as it removes unfixed dye particles, ensuring better color fastness and preventing dye bleeding. The steam soaping process involves treating the dyed fabric with a soaping solution at elevated temperatures, facilitated by steam, to achieve optimal results. ⚙️ Key Features of Steam Soaping Machine - Beaker Material: Constructed with high-grade 316L stainless steel for excellent corrosion resistance and durability.- Operation Modes: Offers both automatic control and manual water filling options, providing flexibility in operation. - Drainage System: Equipped with an automatic drainage device for efficient removal of used solutions.- Temperature Control: Precise temperature regulation to maintain optimal soaping conditions.- Compact Design: Suitable for laboratory settings, occupying minimal space while delivering effective performance. ✅ Benefits of  Steam Soaping Machine - Enhanced Color Fastness: Effectively removes unfixed dyes, resulting in improved wash and rub fastness of the fabric.- Efficient Processing: Reduces the time required for post-dyeing treatments compared to conventional methods.- Consistent Results: Provides uniform treatment across samples, ensuring reproducibility in testing and quality control.- Resource Optimization: Minimizes water and chemical usage through controlled processing parameters.- Versatility: Applicable to various fabric types and dye classes, making it a valuable tool in research and development. Typical Applications - Laboratory Testing: Used in dyeing laboratories for evaluating the fastness properties of dyed samples. - Research and Development: Assists in developing and optimizing dyeing processes and formulations. - Quality Control: Ensures that dyed fabrics meet specified fastness standards before bulk production. In summary, a Steam Soaping Machine is an essential laboratory instrument in the textile industry, facilitating efficient and effective post-dyeing treatments to enhance the quality and durability of dyed fabrics. Features of Steam Soaping Machine:
    1. High-Grade Stainless Steel Beakers - Made from 316L stainless steel for excellent chemical and heat resistance.
    2. Steam-Based Heating - Uses direct or indirect steam to maintain consistent high temperatures ideal for soaping.
    1. Precise Temperature Control - Maintains stable temperatures (typically up to 98–100°C) for effective removal of unfixed dyes.
    2. Automatic and Manual Modes - Offers both programmable automatic cycles and manual operation for flexibility.
     
    1. Beaker Agitation or Rotation - Ensures uniform soaping action across fabric surfaces.
    2. Automatic Drainage System - Efficiently removes used soaping solution to speed up cycle changeovers.
    1. Compact Design - Fits well in lab settings while allowing multiple samples to be processed simultaneously.
    2. Safety Features - Includes pressure and temperature protection systems to ensure safe operation.
     
    1. Low Water and Chemical Use - Designed for minimal liquor ratios, enhancing sustainability.
    2. User-Friendly Interface - Simple digital controls or touch panel for easy operation and cycle programming.
    How to Use a Steam Soaping Machine:
    1. Prepare the Dyed Sample - After dyeing, rinse the fabric to remove surface dye and prepare it for soaping.
    2. Load the Fabric - Place the dyed fabric or sample into the beakers or holders inside the machine.
    1. Add Soaping Solution - Pour the prepared soaping agent (usually a detergent solution) into the beakers or tank as per recipe.
    2. Set Parameters
    - Use the control panel to set: - Temperature (usually 95–98°C) - Soaping time (typically 10–20 minutes) - Steam mode (direct or indirect, if applicable)  
    1. Start the Cycle - Begin the soaping process. The machine will heat the solution using steam and agitate/rotate the beakers for even treatment.
    1. Drain and Rinse - After the cycle ends, the machine may auto-drain. Rinse the fabric with warm water to remove residual chemicals.
    1. Unload the Samples - Carefully remove the fabric. Inspect for evenness and color fastness improvement.
    2. Clean the Machine - Rinse and dry the beakers or tank to maintain hygiene for the next use.
      Safety Tips: - Wear gloves and goggles. - Do not open the lid during operation. - Ensure steam connections are secure.       Steam Soaping machine used for sample soaping after dyeing in laboratory Beaker material: 316L S/S automatic control / manual filling water device, with automatic drainage device. Steam Soaping machine Dunlin price in Bangladesh Steam Soaping machine Dunlin in textile testing equipment Textile testing equipment in Bangladesh Textile testing equipment in Dhaka Textile testing equipment in Uttara MAAM tex Steam Soaping machine Dunlin price in Bangladesh
    Add to cart
    Quick view
    Laboratory tenter

    Laboratory tenter

    $0.00

    Laboratory Tenter

    Laboratory tenter

    laboratory mini tenter

      A Laboratory Tenter (or Lab Stenter) is a small-scale version of an industrial tenter machine used in textile finishing. It is designed for heat-setting, drying, and finishing of fabric samples under controlled conditions in textile testing labs or R&D departments.   Key Features:
    1. Heat-Setting and Drying - Simulates the process of setting fabric dimensions and applying finishes using controlled temperature and tension.
    2. Fabric Width Control - Uses clips or pins on chains or rails to hold fabric edges and stretch them to desired width, just like in full-size tenters.
     
    1. Adjustable Temperature and Speed - Digital controls allow precise setting of drying/curing temperature and conveyor speed to match production conditions.
    2. Compact Design - Bench-top or floor-standing units suitable for labs with limited space.
    3. Transparent Viewing Chamber - Allows visual inspection of fabric behavior during processing.
     
    1. Versatile Application Range - Can process woven, knitted, and nonwoven fabrics of various compositions (cotton, polyester, blends, etc.).
    Applications: - Heat-setting of synthetic fabrics like polyester. - Drying after dyeing, printing, or chemical treatment. Dimensional stability testing (shrinkage/elongation). - Finish evaluation (e.g., softness, stiffness, water repellency). - Process optimization before bulk production.   Benefits of Laboratory Tenter:
    1. Accurate Simulation of Production - Replicates industrial finishing processes for reliable lab-scale testing and development.
    2. Improves Fabric Quality- Allows precise control of heat and tension, optimizing fabric properties like shrinkage, dimensional stability, and hand feel.
     
    1. Cost-Effective - Enables process trials and fabric development without using full-scale production equipment.
    2. Speeds Up R&D - Facilitates quick testing and adjustment of settings for new fabric styles or finishes.
    3. Versatile Applications - Suitable for drying, heat-setting, finishing, and evaluating different types of fabrics and treatments.
     
    1. Space-Efficient - Compact design fits easily into textile labs or sample rooms.
    2. Energy Efficient- Uses less power than industrial machines, ideal for small-scale and repeated testing.
    3. Process Control and Reproducibility- Digital controls ensure consistent and repeatable results, aiding in quality assurance and product development.
     
    1. Enhances Safety - Built with lab use in mind, featuring insulation and safety systems to protect users.
      Features of Laboratory Tenter:
    1. Precise Temperature Control - Digital temperature setting (typically up to 220–250°C) for accurate heat-setting and drying.
    2. Adjustable Fabric Width - Equipped with clip or pin chains to hold and stretch fabric across the width, simulating real stentering.
     
    1. Variable Conveyor or Chain Speed- Adjustable speed to control fabric dwell time during processing.
    2. Compact and Lab-Friendly Design - Designed for bench-top or small floor space use in textile labs.
    3. Transparent Chamber Window - Allows monitoring of fabric behavior during treatment.
    4. Digital Display and Control Panel - Easy operation for setting temperature, speed, and time.
     
    1. Uniform Heat Distribution- Ensures even treatment across the fabric width for accurate testing.
    2. Stainless Steel Construction - Durable, corrosion-resistant body for long-term use at high temperatures.
    3. Safety Features - Includes over-temperature protection, insulated body, and emergency stop functions.
    4. Sample Versatility - Suitable for various fabric types (woven, knit, synthetic, blends) and lab finishing tasks.
      Laboratory Mini tenter Dryer dealer In Bangladesh, Lab Mini tenter Dryer Importer in Bangladesh, Mini tenter Dryer in Bangladesh, Laboratory tenter Dryer in Bd, Lab tenter Dryer In Uttara, Lab tenter Price in Bangladesh, Laboratory tenter Dryer in Bangladesh, Laboratory Mini Dryer in Bangladesh,     Continuous Tenter Laboratory tenter
    Laboratory tenter

    laboratory mini tenter

    Used for continuous drying, curing , and thermo setting process , etc .Instead of tradition oven, can output sample more quick and flat, save a lot of time and increase efficiency. adjustable of feeding & setting separately . Simulating the production onsite to continuous drying. Laboratory Dyeing and Finishing Machine Laboratory tenter Continuous Tenter Machine Dunlin price in Bangladesh Laboratory tenter Continuous Tenter Machine Dunlin in textile Textile testing equipment in Bangladesh Textile testing equipment in Dhaka Textile testing equipment in Uttara MAAM tex Laboratory tenter Continuous Tenter Machine Dunlin price in Bangladesh
    Add to cart
    Quick view
    Fabric Stiffness Tester
    Fabric Stiffness Tester

    Fabric Stiffness Tester

    $0.00

    Fabric Stiffness Tester

    Fabric Stiffness Tester

    Fabric Stiffness Tester

      Fabric Stiffness Tester is a lab instrument used to measure the stiffness or flexural rigidity of fabric materials. It evaluates how resistant a fabric is to bending, which influences its drape, comfort, and handling characteristics. Purpose of Fabric Stiffness Tester: To determine the stiffness of textiles by measuring the bending length and calculating flexural rigidity, often using methods like the Cantilever Test (as per ASTM D1388 or ISO 9073-7).   Working Principle of Fabric Stiffness Tester: A fabric strip is slid over a horizontal platform until its free end bends under its own weight to a specific angle (usually 41.5°). The length at which this occurs is used to calculate bending length and stiffness.   Main Components of Fabric Stiffness Tester: - Test Platform: Flat surface for sample movement. - Graduated Scale: Measures the overhanging length of fabric. - Angle Indicator: Guides the measurement based on standard deflection angle. - Fabric Clamp or Guide: Helps place and move the sample smoothly.   Applications of Fabric Stiffness Tester: - Apparel fabrics (e.g., for comfort and drape analysis) - Technical textiles (e.g., automotive, medical fabrics) - Paper, nonwovens, and films Benefits of Fabric Stiffness Tester:
    1. Accurate Measurement of Flexibility - Provides reliable data on fabric stiffness, essential for quality control and product development.
    2. Improves Product Comfort - Helps assess how soft or rigid a fabric will feel in clothing or furnishings.
    3. Supports Material Selection - Aids designers and engineers in choosing the right fabric for specific applications based on stiffness.
     
    1. Quality Assurance - Detects fabric inconsistencies or defects that affect handling or drape.
    2. Standards Compliance - Enables testing as per international standards like ASTM D1388 and ISO 9073-7 for global product approval.
    3. Quick and Simple Operation - Delivers fast results with minimal operator training or preparation.
     
    1. Applicable to Multiple Materials - Suitable for woven, nonwoven, knitted fabrics, paper, and films.
    2. Enhances R&D Accuracy - Supports consistent material testing during product innovation and textile finishing.
      Features of Fabric Stiffness Tester:
    1. Graduated Measurement Scale - Precise scale to measure overhang length for accurate stiffness calculation.
    2. Flat Test Platform - Smooth, level surface ensures consistent and reliable fabric movement.
    3. Standard Deflection Angle Guide - Built-in 41.5° angle reference for consistent stiffness testing (per ASTM/ISO).
    4. Manual or Motorized Models - Available in both types for simple or automated operation depending on lab needs.
    5. Compact Design - Space-saving unit ideal for textile labs and quality control rooms.
     
    1. Sample Holder or Clamp - Ensures correct alignment and smooth feeding of fabric strips during testing.
    2. Durable Construction - Made of corrosion-resistant materials like stainless steel or aluminum for long-term use.
    3. Compliance with Standards - Supports methods like ASTM D1388, ISO 9073-7 for stiffness testing of fabrics.
     
    1. Lightweight and Portable - Easy to move and use in various lab settings.
    2. Low Maintenance - Simple mechanical parts require minimal servicing.
      How to Use Fabric Stiffness Tester (Cantilever Method):
    1. Prepare the Sample - Cut the fabric into a rectangular strip (e.g., 25 mm × 200 mm), as per standard.
    2. Place the Sample - Lay the fabric strip flat on the test platform with one end aligned at the zero mark.
    3. Slide the Fabric - Gently push the fabric forward so it slowly overhangs the platform.
     
    1. Watch for Deflection - Stop sliding when the free end of the fabric bends down to the reference angle (typically 41.5°).
    2. Read the Bending Length - Measure the overhang distance from the scale. This is the bending length (C).
    3. Calculate Flexural Rigidity
    - Use the formula: G = W × C³ Where: - G = Flexural rigidity (mg·cm) - W = Fabric weight per unit area (mg/cm²) - C = Bending length (cm)  
    1. Repeat for Accuracy - Test both warp and weft directions and average the results for better accuracy.
    Tip: Always perform the test in a controlled environment (standard temperature and humidity) for reliable results.         Fabric Stiffness Tester Scope of application It is used to measure the stiffness of cotton, wool, silk, linen, chemical fibers and other woven fabrics, knitted fabrics, general nonwovens, coated fabrics, etc. It is also suitable for measuring the stiffness of paper, leather, film and other flexible materials. Relevant Standards GB/T 18318, ASTM D 1388, IS09073-7, BS EN22313 etc. [Instrument Characteristics] 1. Infrared photoelectric invisible inclined plane detection system replaces the traditional tangible inclined plane, realizes non-contact detection, and overcomes the problem that the measurement accuracy is affected by the sample torsion lifted by the inclined plane. 2. The inclination adjustable mechanism of instrument measurement to meet different test requirements. 3. Stepping motor drive, accurate measurement, smooth operation; 4. The color touch screen display can show the extended length, bending length, bending stiffness of the sample, the warp average, the weft average and the total average of the above values respectively. 5. Printing of Chinese report forms for thermal printers. Technical parameters 1. Test methods: The two method (A method: Weft test, B method: Forward and backward test) 2. Measurement angle:41.5 degree, 43 degree and 45 degree adjustable 3. Extend the length range:5-220 mm (special requirements can be made at the time of ordering) 4. Length resolution:0.01mm 5. Measurement accuracy:±0.1mm 6. Specimen specifications:250×25mm 7. Work platform specifications:250×50mm 8. Specification of sample pressing plate:250×25mm 9. Pushing speed of press plate:3 mm/s; 4 mm/s; 5 mm/s 10. Display output: Touch screen display 11. Print Output: Chinese Report 12. Data Processing Volume: A total of 15 groups, each group less than 20 trials 13. Printer: Thermal printer 14, power supply:AC220V 50Hz 15. Host volume:570mm×360mm×490mm 16. Host weight:20kg
    Add to cart
    Quick view
    Stretch Recovery Tester (Static Method)

    Stretch Recovery Tester Static Method

    ,
    $0.00

    Stretch Recovery Tester – Static Method | ASTM D3107 / D2594 | Ready Stock Bangladesh

    Product Introduction

    The Stretch Recovery Tester – Static Method is a professional textile laboratory testing instrument designed to evaluate the stretch and recovery properties of elastic fabrics, knitted fabrics, stretch garments, ribbons and other extensible textile materials. The tester is suitable for Textile Testing Laboratories, Garment Factories, Fabric Manufacturers, QA/QC Departments, R&D Laboratories and Academic Textile Laboratories. ASTM D3107 / ASTM D2594 | Ready Stock in Bangladesh | Quick Delivery | Local Support

    Why Choose This Stretch Recovery Tester?

    • Ready Stock in Bangladesh
    • Suitable for textile and garment testing laboratories
    • Designed for stretch and recovery evaluation
    • Suitable for elastic and stretchable textile materials
    • Applicable to relevant ASTM testing methods
    • Easy laboratory operation
    • Compact and practical testing equipment
    • Competitive price in Bangladesh
    • Quick local delivery
    • Local sales and technical support from MAAM TEX

    Testing Standards

    The Stretch Recovery Tester is suitable for testing requirements related to:
    • ASTM D3107 – Stretch Properties of Fabrics
    • ASTM D2594 – Stretch Properties of Knitted Fabrics
    Testing procedure and applicable standard should be selected according to the material and customer's laboratory requirement.

    Scope of Application

    This equipment can be used for testing:
    • Stretch Fabrics
    • Knitted Fabrics
    • Elastic Fabrics
    • Stretch Garments
    • Sportswear Fabrics
    • Elastic Ribbons
    • Hosiery Materials
    • Textile Materials with Stretch Properties

    Suitable For

    • Textile Testing Laboratories
    • Garment Manufacturing Industries
    • Knitwear Factories
    • Fabric Mills
    • Sportswear Manufacturers
    • Elastic Fabric Manufacturers
    • Quality Control Laboratories
    • R&D Laboratories
    • Third-Party Testing Laboratories
    • Textile Universities & Institutes

    Key Advantages

    Ready Stock in Bangladesh

    No need to wait for overseas import. This product is available from MAAM TEX stock in Bangladesh, subject to current stock availability.

    Quick Delivery

    Local stock enables faster delivery compared with normal import-based supply.

    Competitive Price

    MAAM TEX provides competitive quotations for textile laboratory testing equipment.

    Local Support

    Professional sales and after-sales support are available for customers in Bangladesh.

    Laboratory Suitable

    A practical solution for routine quality control, product development and textile testing applications.

    Frequently Asked Questions

    What is a Stretch Recovery Tester?

    A Stretch Recovery Tester is a textile laboratory instrument used to evaluate the ability of a fabric or elastic textile material to stretch and recover after the application and removal of a specified load or extension.

    What standards are applicable?

    The equipment is intended for testing requirements associated with ASTM D3107 and ASTM D2594, depending on the material and test method.

    Who needs a Stretch Recovery Tester?

    Textile mills, garment factories, knitwear manufacturers, fabric manufacturers, QA/QC laboratories, R&D departments and textile testing laboratories can use this equipment.

    Is this machine available in Bangladesh?

    Yes. MAAM TEX offers this Stretch Recovery Tester from stock in Bangladesh, subject to current availability.

    Can I get a quotation?

    Yes. Contact MAAM TEX for the latest price, stock confirmation, delivery information and quotation.

    Ready Stock – Bangladesh

    No Need to Wait for Import

    Stretch Recovery Tester – Static Method Ready Stock | Competitive Price | Quick Delivery | Local Support For current stock status and quotation, please contact MAAM TEX.

    Call to Action

    Looking for a Stretch Recovery Tester in Bangladesh? Get the Stretch Recovery Tester – Static Method from MAAM TEX with ready-stock availability, competitive pricing and local support. Contact MAAM TEX today for Price & Stock Confirmation.

    Stretch Recovery Tester Static Method 

    Stretch Recovery Tester (Static Method)

    Stretch Recovery Tester

      A Stretch Recovery Tester Static Method is a lab instrument used to evaluate the stretch ability and recovery properties of fabrics, elastomers, or other stretchable materials. This method is crucial in textiles and material science to assess how well a material returns to its original shape after being stretched. Key Functions of Stretch Recovery Tester Static Method : - Measures elongation under a fixed force or length. - Assesses the recovery percentage after a specified recovery time once the force is removed. - Evaluates fabric's resilience, durability, and comfort properties. How It Works Stretch Recovery Tester  Static Method:
    1. A sample is stretched to a predetermined extension or force.
    2. The stretch is maintained for a set period.
    3. After removing the load, the recovery (return to original length) is measured after a fixed time.
    4. The fabric sample is clamped and stretched to a specific length or force.
    5. It’s held for a fixed duration (e.g., 1–5 minutes).
    6. The tension is released, and the sample is allowed to recover.
    7. The recovered length is measured after a set time.
    Main Components: - Fixed clamps to hold the sample. - Movable clamps for stretching. - Precision scale or ruler for measuring elongation and recovery. - Timing device (manual or digital) to control stretching and recovery periods. - To assess elastic recovery and dimensional stability after stretching. Applications: - Used in testing knitwear, sportswear, elastic fabrics, and compression garments. - Helps in product development and quality assurance. Stretch Recovery Tester Static Method is designed to determine the stretch recovery property of elastic material by static method. 2.0mm thickness stainless steel frame and base board, makes the tester firm and stable. Sample holder can be slid along the guide rail smoothly and can be fixed at any position of the rail. Test Scope：elastomeric material Testing Standards：ASTM D2594、ASTM D3107, etc. key features of a Stretch Recovery Tester Static Method: Adjustable clamps and measurement scale. - Timer for accurate stretch/recovery periods. - Simple mechanical design for ease of use. ✅ 1. Manual or Semi-Automatic Operation - Allows controlled stretching and recovery measurements. - Simple setup for routine quality control. ✅ 2. Adjustable Clamp System - Securely holds samples of various sizes and thicknesses. - Ensures consistent test conditions. ✅ 3. Precision Measurement Scale - Provides accurate readings of elongation and recovery length. - Often graduated in millimeters or inches. ✅ 4. Sturdy Frame - Made of corrosion-resistant metal or coated steel. - Ensures durability and stability during testing. ✅ 5. Time Control Support - Timer to monitor stretch and recovery durations. - Helps standardize test procedures. ✅ 6. Compact Design - Space-saving for lab environments. - Easy to move and operate. ✅ 7. Compliance with Standards - Often designed to meet standards like ASTM D3107 or BS 4294. Would you like a comparison with the dynamic method or specifications for a particular model? key benefits of using a Stretch Recovery Tester Static Method: ✅ 1. Accurate Fabric Performance Analysis- Provides reliable data on stretch and recovery, critical for assessing elasticity and fit. ✅ 2. Easy to Operate- Simple, manual setup makes it ideal for routine testing and quality control. ✅ 3. Cost-Effective- More affordable than dynamic testers, making it suitable for smaller labs or production units. ✅ 4. Standardized Testing- Supports industry-standard methods (e.g., ASTM D3107), ensuring consistency across tests. ✅ 5. Versatile Applications- Suitable for testing knit fabrics, elastic bands, spandex materials, and other stretchable textiles. ✅ 6. Durable and Low Maintenance- Mechanically straightforward with minimal upkeep required. ✅ 7. Enhances Product Development- Helps designers and manufacturers optimize materials for comfort, performance, and durability. Applications: - Textile R&D - Production quality control
    Stretch Recovery Tester (Static Method)

    Stretch Recovery Tester

    - Evaluating materials for comfort, durability, and fit Stretch Recovery Tester Diller In Bangladesh, Stretch Recovery Tester Importer In Bangladesh, Stretch Recovery Tester in Bangladesh, Stretch Recovery Tester in Bd, Stretch Recovery Tester In Uttara, Stretch Recovery Tester Price in Bangladesh, Stretch Recovery Tester Supplier in Bangladesh  
    Add to cart
    Quick view
    Controller For IR Dyeing Machine
    Color Matching Cabinet -light Box

    Controller For IR Dyeing Machine

    ,
    $0.00
    Controller For IR Dyeing Machine
    Controller For IR Dyeing Machine

    IR Dyeing machine controller

    Controller For IR Dyeing Machine offers exceptional quality .purchasing of our controller provides cost efficiencies, and customization options enabling you to meet your specific requirements comfortably. Collaborate with program A Controller for IR Dyeing Machine is a specialized control system designed to manage and automate the dyeing process in textile manufacturing, particularly using infrared heating technology. These controllers are crucial for achieving consistent dye quality, reducing energy consumption, and optimizing the dyeing process.   Key Features of an Controller For IR Dyeing Machine :
    1. Temperature Control:- Precisely regulates the infrared heaters to maintain uniform temperature across the dye bath. - Supports customizable heating curves (ramp-up, hold, and cool-down phases).
    2. Programmable Logic Control (PLC): - Allows operators to set and automate dyeing programs for different fabrics and dye types. - Supports multiple recipes or programs for different batches.
     
    1. Real-Time Monitoring and Feedback: - Monitors parameters like temperature, fabric rotation, bath circulation, and timing. - Provides real-time data and alarms for deviations.
    2. Touchscreen Interface / HMI (Human Machine Interface): - User-friendly interface for configuring and monitoring processes. - Multi-language support and graphical display of process curves.
     
    1. Data Logging and Traceability: - Records process data for quality control and traceability.
    2. Energy Efficiency Optimization: - Manages IR heater output to reduce energy usage. - Often includes features for auto shut-off or idle mode.
     
    1. Safety Features: - Includes emergency stop, over-temperature protection, and fault detection systems. 8. Connectivity: - Modern controllers may support Ethernet, Modbus, or other industrial communication protocols for integration into factory automation systems.
      Using A Controller For IR Dyeing Machine provides several benefits, especially in textile manufacturing where precision and efficiency are critical. Here are the key advantages:
    1. Improved Dyeing Accuracy and Consistency
    - Maintains precise temperature control and timing, ensuring uniform dye uptake across the fabric. - Reduces color variation between batches.  
    1. Enhanced Energy Efficiency- Infrared heating is more energy-efficient than traditional heating methods.- The controller optimizes energy use by adjusting the IR output based on process needs, reducing overall energy consumption.
     
    1. Time Savings- Faster heating and cooling cycles due to infrared technology.- Automated processes reduce manual intervention and cycle times. 4. Better Process Control- Programmable dyeing cycles and precise control over each stage (heating, dyeing, rinsing, cooling).- Real-time monitoring and adjustments improve reliability.
     
    1. Reduced Water and Chemical Usage- More efficient dye penetration and fixation mean less water and fewer chemicals are needed for reprocessing or corrections.6. Lower Operational Costs
    - Energy savings, reduced rework, and lower labor input contribute to cost efficiency. - Minimizes fabric damage, reducing material waste.  
    1. Enhanced Safety Built-in alarms, emergency shut-off and automatic fault detection enhance operational safety.8. Data Logging and Traceability- Ability to record and review dyeing process data helps in quality control and troubleshooting.- Facilitates compliance with industry standards and audits.
     
    1. User-Friendly Operation- Modern touchscreen interfaces make it easier for operators to manage and monitor processes.- Multilingual support and visual feedback enhance usability.
     
    Add to cart
    Quick view
    VeriVide Original D65 Tube Light Artificial Daylight 6500K
    Color Matching Cabinet -light Box

    VeriVide Original D65 Tube light

    , , ,
    $0.00

    VeriVide Original D65 Tube Light – Artificial Daylight

    VeriVide Original D65 Tube Light Artificial Daylight 6500K

    VeriVide Original D65 Artificial Daylight Tube Light – 6500K, CRI 98

    Original VeriVide D65 Artificial Daylight Tube Light for Accurate Colour Assessment

    VeriVide Original D65 Tube Light – Artificial Daylight is a professional standardized daylight light source designed for accurate and consistent visual colour assessment. With a correlated colour temperature of 6500K and high CRI 98, the VeriVide D65 provides a controlled artificial daylight environment for evaluating colours, shades, textiles, garments, printed materials, plastics, paints, packaging and other products where colour consistency is critical.

    Natural daylight changes according to the time of day, weather, season, geographical location and surrounding conditions. These changes can create differences in visual colour evaluation. A standardized D65 artificial daylight source provides a controlled lighting condition so that colour decisions can be made consistently. VeriVide explains that using the same standardized artificial light source throughout the supply chain helps reduce problems caused by variations in natural daylight.

    The VeriVide Original D65 Artificial Daylight Tube is therefore an important replacement or lighting component for professional colour assessment cabinets, viewing systems and suitable standardized visual inspection environments.

    Product Overview

    Specification Details
    Product Name VeriVide D65 Artificial Daylight Tube Light
    Brand VeriVide
    Light Source D65 Artificial Daylight
    Correlated Colour Temperature 6500K
    Colour Rendering Index CRI 98
    Lamp Type T8
    Available Length 600 mm / 1200 mm / 1500 mm
    Available Power 18W / 36W / 58W
    Application Colour Assessment & Visual Inspection
    Colour Evaluation Standardized Artificial Daylight
    Typical Use Textile, Garments, Printing, Packaging, Paint, Plastic & Manufacturing
    Manufacturer VeriVide
    Product Codes 600D65 / 1200D65 / 1500D65

    Specifications are based on VeriVide's published lamp information. Availability of individual lengths/models should be confirmed at the time of order.

    What is VeriVide D65 Artificial Daylight?

    VeriVide Original D65 Tube light is a standardized daylight illuminant representing daylight with a correlated colour temperature of approximately 6500 Kelvin. VeriVide describes D65 as the international standard measure of daylight based around a mean colour temperature of 6500K.

    The purpose of D65 lighting is not simply to provide a bright white light. Instead, it provides a standardized spectral lighting condition suitable for professional visual colour assessment.

    Two products can sometimes appear to have the same colour under one light source but look different under another. This phenomenon is known as metamerism. For this reason, professional colour assessment requires controlled and standardized illumination. VeriVide specifically highlights the importance of viewing colour samples under standardized lighting conditions to identify colour differences and metameric effects.

    VeriVide Original D65 Tube light is engineered for this type of controlled colour assessment environment.

    Why Choose Original VeriVide D65 Tube Light?

    Colour evaluation is an important part of quality control in many industries. A small difference in colour can result in rejection of fabric, garments, packaging, printed materials or finished products.

    Using ordinary room lighting or an uncontrolled daylight source may produce inconsistent visual results. The VeriVide D65 provides a standardized artificial daylight source designed specifically for professional colour assessment.

    Key advantages include:

    • 6500K standardized D65 daylight
    • High CRI 98
    • Designed for accurate visual colour assessment
    • Consistent lighting conditions
    • Suitable for professional colour matching
    • Helps reduce variations caused by natural daylight
    • Suitable for colour assessment equipment and viewing systems
    • Available in multiple tube lengths
    • Suitable for textile and garment quality control
    • Useful for identifying colour differences and metamerism
    • Original VeriVide replacement lamp

    VeriVide states that its D65 lamp has a CRI of 98, allowing colours to be rendered more accurately than lower-CRI light sources.

    Technical Specifications

    1. Correlated Colour Temperature – 6500K

    VeriVide Original D65 Tube light has a 6500K correlated colour temperature.

    6500K is the defining colour-temperature characteristic of D65 artificial daylight. It produces a cool daylight appearance suitable for professional colour evaluation.

    This is particularly important when colour standards and product samples need to be compared under controlled lighting conditions.

    2. High Colour Rendering Index – CRI 98

    VeriVide Original D65 Tube light is specified with a CRI of 98.

    CRI, or Colour Rendering Index, indicates how accurately a light source renders colours in comparison with a reference light source. A higher CRI is generally desirable for visual colour assessment because it allows colours to be represented more accurately.

    For applications such as textile shade matching, garment inspection and product colour comparison, high colour rendering performance is an important consideration. VeriVide lists its D65 lamp with CRI 98.

    3. T8 Tube Design

    The VeriVide D65 fluorescent lamp is available in T8 format.

    The T8 designation refers to the tube diameter/type used by the lamp. The official VeriVide specification lists D65 versions in 600 mm, 1200 mm and 1500 mm lengths, with corresponding 18W, 36W and 58W power ratings.

    Available VeriVide D65 Models

    VeriVide 600D65

    • Length: 600 mm
    • Power: 18W
    • Tube Type: T8
    • CCT: 6500K
    • CRI: 98
    • Product Code: 600D65

    VeriVide 1200D65

    • Length: 1200 mm
    • Power: 36W
    • Tube Type: T8
    • CCT: 6500K
    • CRI: 98
    • Product Code: 1200D65

    VeriVide 1500D65

    • Length: 1500 mm
    • Power: 58W
    • Tube Type: T8
    • CCT: 6500K
    • CRI: 98
    • Product Code: 1500D65

    These three D65 configurations are listed in VeriVide's official lamp specification.

    Application of VeriVide Original D65 Tube light

    The VeriVide D65 Artificial Daylight Tube is suitable for applications where standardized daylight illumination is required for visual inspection and colour assessment.

    Textile Industry

    The textile and garment industry is one of the major applications for D65 artificial daylight.

    Textile manufacturers, dyeing factories, garment factories, buying houses and quality-control laboratories need to compare fabric samples, dyed yarns, garments and colour standards under controlled lighting.

    Typical applications include:

    • Fabric shade matching
    • Garment colour inspection
    • Yarn colour comparison
    • Dyed fabric inspection
    • Colour approval
    • Lab dip assessment
    • Bulk production shade checking
    • Colour standard comparison
    • Final garment inspection
    • Buyer sample approval

    Using standardized lighting helps different departments and organizations evaluate the same colour under similar viewing conditions.

    Colour Matching

    Colour matching requires more than simply checking whether two samples look similar.

    A sample may appear acceptable under one light source but show a noticeable difference under another light source. This is particularly important in textile, garment and manufacturing applications.

    VeriVide Original D65 Tube light provides a standardized daylight reference for visual assessment.

    For example, a laboratory may compare:

    Approved Colour Standard → Lab Dip → Bulk Fabric

    All three samples can be evaluated under the same D65 lighting condition.

    This provides a more controlled environment for colour decisions.

    Metamerism Assessment

    Metamerism occurs when two colours appear to match under one lighting condition but appear different under another.

    This can create serious problems in textile and product manufacturing.

    For example:

    • Fabric A may match the approved standard under one light.
    • Under daylight, Fabric A may appear different.
    • Under store lighting, the difference may become even more noticeable.

    VeriVide Original D65 Tube light recommends standardized viewing environments because changing illumination can reveal colour differences that may not be visible under another light source.

    VeriVide Original D65 Tube light light source can therefore form an important part of a professional colour assessment system.

    Use in VeriVide Colour Assessment Cabinets

    VeriVide colour assessment cabinets can be configured with standardized light sources including D65 and D50, along with other illuminants depending on the application.

    The D65 tube is particularly useful where daylight-standard colour assessment is required.

    A typical colour assessment cabinet may contain multiple light sources to allow the operator to check colour behaviour under different lighting conditions.

    This can help identify:

    • Colour inconsistency
    • Metamerism
    • Shade variation
    • Fluorescence-related appearance
    • Differences between product and colour standard

    Use in Textile Testing Laboratories

    Textile testing laboratories require controlled and repeatable environmental conditions for visual assessments.

    VeriVide Original D65 Tube light can be used as part of an appropriate viewing cabinet or visual inspection system for:

    • Colour fastness assessment
    • Shade evaluation
    • Fabric colour grading
    • Garment inspection
    • Pilling assessment
    • Appearance assessment
    • Colour matching
    • Standard comparison

    VeriVide Original D65 Tube light own textile testing equipment uses CIE D65 artificial daylight for standardized visual assessment applications. For example, its Pilling Assessment Viewer uses VeriVide CIE D65 Artificial Daylight for assessment under relevant EN ISO 12945 methods.

    Colour Fastness Assessment

    Visual evaluation is also important in textile colour fastness testing.

    A controlled D65 light source can provide standardized viewing conditions when comparing test specimens with reference standards.

    VeriVide's Colour Fastness Cabinet, for example, uses D65 Artificial Daylight at 6500K as one of its standardized light sources, together with UV black light for relevant assessment applications.

    Benefits for Garment Manufacturers

    For garment manufacturers, colour consistency is essential from sampling through bulk production.

    The VeriVide Original D65 Tube light can help establish a controlled visual environment for:

    Sampling

    Compare the original colour standard with lab dips and development samples.

    Production

    Check whether bulk production remains within the approved colour range.

    Quality Control

    Evaluate finished garments before shipment.

    Buyer Inspection

    Provide a standardized environment for colour approval.

    Final Inspection

    Reduce the possibility of colour disputes caused by inconsistent lighting.

    Benefits for Textile Dyeing Factories

    In dyeing factories, colour decisions are often made at several stages.

    These may include:

    1. Recipe development
    2. Lab dip preparation
    3. Lab dip approval
    4. Bulk dyeing
    5. Shade checking
    6. Finishing
    7. Final inspection
    8. Shipment inspection

    Using a standardized VeriVide Original D65 Tube light source can help maintain consistent visual conditions across these stages.

    This is especially useful when several people are involved in colour evaluation.

    Standards and Compliance

    The VeriVide Original D65 Tube light is specified by VeriVide for use as a D65 artificial daylight source.

    According to VeriVide's published lamp information, the D65 lamp has a 6500K correlated colour temperature, is within the tolerances prescribed in BS 950 Part 1, and has high conformance to relevant CIE specifications for accurate colour matching. VeriVide's current documentation also references ISO/CIE 23603 / CIE S 012/E for D65 applications.

    Depending on the particular testing method, viewing cabinet and industry application, additional standards may apply. Users should always verify the exact lighting requirements specified by their applicable test method, buyer or customer.

    Why Standardized Lighting Matters

    Natural daylight is not constant.

    It can change due to:

    • Time of day
    • Weather
    • Season
    • Geographic location
    • Atmospheric conditions
    • Window orientation
    • Surrounding environment

    Because of these factors, a colour sample may look different at different times or locations.

    VeriVide notes that these natural-light variations can cause colour consistency problems throughout a supply chain. Standardized artificial light provides a controlled alternative.

    For international textile and garment supply chains, this is especially important because a buyer, manufacturer and supplier may be located in different countries.

    VeriVide D65 vs Ordinary Daylight

    Feature VeriVide D65 Ordinary Natural Daylight
    Standardized Yes No
    Colour Temperature 6500K Variable
    Controlled Environment Yes No
    Colour Assessment Professional Variable
    Repeatability High Low
    Weather Dependent No Yes
    Time-of-Day Dependent No Yes
    Suitable for Standardized Colour Evaluation Yes Not recommended as sole reference

    The purpose of VeriVide D65 is therefore to provide a more consistent and controlled lighting condition than relying on natural daylight alone.

    VeriVide Original D65 Tube Replacement

    For existing VeriVide viewing cabinets and compatible systems, correct lamp replacement is important.

    VeriVide recommends replacing lamps after their specified service life because the spectral output of lamps can change with usage. The manufacturer notes a 2000-hour life-cycle recommendation for its lamps and recommends replacement after 2000 hours or one year of use to maintain reliable colour assessment conditions.

    When replacing a lamp, users should verify:

    • Correct VeriVide D65 specification
    • Correct tube length
    • Correct wattage
    • Correct tube type
    • Compatibility with the existing equipment
    • Applicable voltage and ballast requirements

    How to Select the Correct D65 Tube

    Before ordering a replacement VeriVide D65 tube, check the existing lamp.

    Step 1 – Check the Length

    Measure the existing tube.

    Available VeriVide D65 lengths include:

    • 600 mm
    • 1200 mm
    • 1500 mm

    Step 2 – Check Wattage

    The corresponding official specifications are:

    • 600 mm – 18W
    • 1200 mm – 36W
    • 1500 mm – 58W

    Step 3 – Check Tube Type

    The listed D65 versions are T8.

    Step 4 – Check Equipment Compatibility

    If the lamp is being installed into a VeriVide viewing cabinet or colour assessment equipment, confirm the equipment model before ordering.

    Step 5 – Confirm Original Product Requirement

    For professional colour assessment, use the correct standardized lamp rather than an ordinary commercial daylight tube.

    Suitable Industries

    The VeriVide Original D65 Tube Light can be relevant to many industries, including:

    Textile & Garments

    Fabric, yarn, garment and shade evaluation.

    Dyeing & Finishing

    Lab dip and bulk shade comparison.

    Printing

    Visual colour checking of printed materials.

    Packaging

    Colour consistency of packaging materials.

    Plastics

    Colour and appearance inspection.

    Paint & Coating

    Visual colour comparison.

    Automotive

    Component colour and appearance assessment.

    Furniture

    Fabric, leather, plastic and surface colour evaluation.

    Graphic Arts

    Visual inspection under controlled lighting where the relevant D65 specification is applicable.

    Key Features at a Glance

    VeriVide Original D65 Tube light offers:

    • Original VeriVide D65 light source
    • 6500K correlated colour temperature
    • CRI 98
    • T8 tube format
    • Multiple length options
    • Standardized artificial daylight
    • Professional colour assessment
    • Consistent visual inspection conditions
    • Suitable for textile and garment industries
    • Suitable for colour matching
    • Useful for metamerism assessment
    • Suitable for compatible VeriVide equipment
    • Professional replacement lamp solution

    Frequently Asked Questions

    What is a VeriVide D65 Tube Light?

    VeriVide D65 is a standardized artificial daylight lamp designed to provide controlled D65 illumination for professional visual colour assessment.

    What is the colour temperature of VeriVide D65?

    The VeriVide D65 Artificial Daylight Tube has a correlated colour temperature of 6500K.

    What is the CRI of VeriVide Original D65 Tube light ?

    The official VeriVide specification lists the D65 lamp with CRI 98.

    What lengths are available?

    The official specification lists 600 mm, 1200 mm and 1500 mm versions.

    What are the wattages?

    The listed versions are 18W, 36W and 58W, corresponding respectively to 600 mm, 1200 mm and 1500 mm lengths.

    Is VeriVide Original D65 Tube light suitable for textile colour matching?

    Yes. D65 standardized daylight is widely used in controlled visual colour assessment, including textile and garment applications. VeriVide specifically describes D65 as being specified for applications where colour consistency and quality need to be maintained.

    Why should I use Original VeriVide D65 instead of an ordinary 6500K tube?

    A tube being labelled “6500K” does not by itself make it a standardized VeriVide D65 colour-assessment lamp. Professional colour assessment depends on the characteristics of the light source, not only its nominal colour temperature. VeriVide's D65 lamp is designed and specified as an artificial daylight source for standardized colour assessment.

    When should the D65 lamp be replaced?

    VeriVide recommends replacement after approximately 2000 hours or one year of use to maintain reliable assessment conditions.

    Can this lamp be used in any T8 fixture?

    Not necessarily. Compatibility with the fixture, ballast, electrical requirements and intended application should be checked before installation.

    Product Applications

    VeriVide D65 Artificial Daylight Tube Light is suitable for:

    • Textile Testing Laboratory
    • Garment Factory
    • Dyeing Factory
    • Fabric Inspection
    • Colour Matching Laboratory
    • Quality Control Laboratory
    • Buying House
    • Apparel Industry
    • Printing Industry
    • Packaging Industry
    • Plastic Industry
    • Paint Industry
    • Product Inspection
    • Colour Assessment Cabinet
    • Viewing Cabinet
    • Visual Inspection System

    Why Buy VeriVide D65 from MAAM TEX?

    MAAM TEX supplies textile testing instruments, laboratory equipment, colour assessment products and related consumables for textile and garment industries.

    For customers requiring VeriVide Original D65 Artificial Daylight Tube Light, we can provide the appropriate specification based on your existing equipment, required tube length and application.

    Before placing an order, please provide:

    1. Required quantity
    2. Tube length – 600 / 1200 / 1500 mm
    3. Existing machine/cabinet model, if applicable
    4. Required wattage
    5. Photo of the existing tube, if available

    This information helps ensure that the correct replacement lamp is supplied.

    Ordering Information

    Product:

    VeriVide Original D65 Tube Light – Artificial Daylight

    Available Options:

    600D65
    600 mm / 18W / T8 / 6500K / CRI 98

    1200D65
    1200 mm / 36W / T8 / 6500K / CRI 98

    1500D65
    1500 mm / 58W / T8 / 6500K / CRI 98

     current stock Available  

    Conclusion

    The VeriVide Original D65 Tube Light – Artificial Daylight is a professional standardized daylight source for controlled visual colour assessment. With 6500K colour temperature and CRI 98, it is designed for applications where colour consistency, repeatability and accurate visual evaluation are important.

    For textile and garment manufacturers, dyeing factories, testing laboratories, buying houses and quality-control departments, a standardized D65 lighting environment can help create more consistent colour evaluation conditions and reduce problems associated with variable natural daylight.

    For compatible VeriVide equipment and professional colour assessment applications, selecting the correct Original VeriVide D65 lamp is important for maintaining the intended lighting conditions of the system.

    Add to cart
    Quick view
    Orbital Shaker Machine
    Orbital Shaker Machine

    Orbital Shaker Machine

    $0.00

    Orbital Shaker Machine

    Orbital Shaker Machine

    Orbital Shaker Machine

    Orbital Shaker Machine is a lab device used to mix, agitate, or aerate samples by moving them in a circular motion on a flat platform. It’s commonly used in microbiology, biotechnology, and textile labs for tasks like dye extraction, enzyme reactions, and chemical mixing. Key Features or Orbital Shaker machine :
    1. Orbital Motion - Provides a smooth circular shaking pattern, ideal for gentle mixing without foaming or splashing.
    2. Adjustable Speed Control - Speed typically ranges from 50 to 300 RPM, depending on the model and application.
    3. Timer Function - Allows users to set shaking time from minutes to hours for precise control of experiments.
    1. Platform with Clamps or Mats - Holds flasks, beakers, test tubes, or trays securely during operation.
    2. Digital Display (in advanced models) - Shows speed and time settings for accurate and repeatable performance.
    3. Variable Capacity - Available in sizes to accommodate different lab needs—from a few samples to dozens.
     
    1. Quiet Operation - Designed for minimal vibration and noise during continuous use.
    Common Applications: - Mixing dyes or chemicals in textile labs - Growing cell cultures or microbial samples in flasks - Solvent extraction or dissolution of powders in liquids Sample preparation for testing or analysis   Benefits of Orbital Shaker Machine:
    1. Uniform Mixing - Ensures even distribution of dyes, chemicals, or cultures without manual stirring.
    2. Gentle Agitation - Ideal for delicate samples like cell cultures or fabric swatches, reducing damage or splashing.
    3. Hands-Free Operation - Allows continuous, unattended mixing—improving lab efficiency and freeing up personnel.
     
    1. Customizable Settings - Adjustable speed and timer let users tailor mixing to specific sample types and needs.
    2. Versatile Use - Suitable for a wide range of applications including dye mixing, sample incubation, chemical reaction enhancement, and microbial growth.
    3. Enhanced Reproducibility - Consistent shaking patterns and digital controls ensure repeatable results across experiments.
     
    1. Reduces Human Error - Automated operation minimizes variability and manual handling mistakes.
    2. Compact and Lab-Friendly - Takes up minimal space while accommodating multiple sample containers.
    Features of Orbital Shaker Machine:
    1. Orbital Shaking Motion - Moves samples in a circular path for uniform and consistent mixing.
    2. Variable Speed Control - Adjustable shaking speed (typically 50–300 RPM) to suit different sample types.
    3. Digital Timer - Programmable run time for precise and repeatable operations.
     
    1. Flat Platform Design - Accommodates flasks, beakers, tubes, or trays with optional clamps or non-slip mats.
    2. LCD or LED Display (in advanced models) - Shows speed, time, and operating status clearly.
    3. Quiet Operation - Low-noise motor and stable base minimize vibration and disturbance in the lab.
     
    1. Overload Protection - Prevents motor damage from excessive weight or resistance.
    2. Compact and Durable Build - Designed to fit standard lab benches and withstand regular use.
    3. Versatile Capacity Options - Available in various sizes to handle different numbers and sizes of containers. User-Friendly Interface - Simple control panel for easy setup and operation.
      Orbital Shaker MachineShaker Machine Brand: Dunlin Origin: Korea. Maximum. load capacity (with platform) is 7.5kg Support orbital and linear shaking Fashion design of high strength tempered glass on the front panel LED display for easy-reading of speed and time simultaneously Digital speed control system and micro-computer control make stable running and prevent sample splashing. Brushless DC motor is maintenance-free and provides long service life Over-load and over-speed detection and protection Supports both orbital shaking and linear shaking and easy to switch the shaking mode Continuous operation and timed operation in range of 0-99h59min are available Automatic alarm by time controller allows for unsupervised operation A wide choice of platforms for various applications   Orbital Shaker Machine Shaker Machine Dunlin price in Bangladesh Orbital Shaker Machine Shaker Machine Dunlin in textile Textile testing equipment in Bangladesh Textile testing equipment in Dhaka Textile testing equipment in Uttara MAAM tex Shaker Machine Dunlin price in Bangladesh
    Add to cart
    Quick view
    Digital Elmendorf Tearing Tester

    Digital Elmendorf tearing tester

    ,
    $0.00
    Digital Elmendorf Tearing Tester
    Digital Elmendorf Tearing Tester

    Digital Elmendorf Tearing Tester

      Digital Elmendorf Tearing Tester is a precision instrument used to measure the tear strength of materials like woven fabrics, paper, plastic films, and nonwovens. It determines how much force is required to continue tearing a pre-slit sample. Key Functions of Digital Elmendorf Tearing Tester: - Measures propagation tear resistance, not initial tear. - Uses a pendulum to apply force; the energy lost during tearing is calculated to determine tear strength. - Equipped with a digital display for direct reading of results in grams or millinewtons. Core Components: - Pendulum Arm: Applies tearing force. - Clamps: Secure the sample before and after the tear. - Cutting Blade: Creates a precise slit at the start of the test. - Digital Display Unit: Shows the tearing force result clearly and instantly. - Counterweights: Optional weights for increasing test range (for stronger materials).   Applications of Digital Elmendorf Tearing Tester: - Testing tear resistance of: - Textile fabrics (especially woven) - Paper and cardboard - Plastic films - Nonwovens - Packaging materials Benefits of Digital Elmendorf Tearing Tester:
    1. Accurate Tear Strength Measurement - Provides precise data on tear resistance, critical for quality control and product performance.
    2. Digital Readout - Easy-to-read display gives instant, reliable results without manual calculations.
    3. High Reproducibility - Ensures consistent test outcomes due to controlled tearing angle and speed.
     
    1. Fast Testing Process - Simple loading and quick test cycle increase lab efficiency.
    2. Suitable for Various Materials - Tests a wide range of flexible materials like textiles, paper, plastic, and packaging.
    3. Customizable Range - Use of optional weights extends the test range for low to high tear strength materials.
    4. Low Sample Waste - Requires small fabric or material samples, reducing waste during testing.
    5. Standards Compliance - Meets international testing standards (e.g., ASTM D1424, ISO 13937) for credibility and uniformity.
    Features of Digital Elmendorf Tearing Tester: Digital Display - Provides accurate and direct reading of tear strength in grams, mN, or cN. Pendulum Mechanism - Uses a swinging pendulum to simulate tear propagation with consistent force. Adjustable Test Range - Includes interchangeable pendulum weights to test various material strengths.
    1. Precision Sample Clamp - Securely holds samples in place to ensure accurate tear initiation.
    2. Pre-Cutting Blade - Integrated knife creates a precise initial slit in the sample before tearing.
    3. User-Friendly Interface - Simple buttons and screen navigation for ease of operation.
    4. Standard Test Compliance - Compatible with ASTM D1424, ISO 1974, ISO 13937, and other tear strength standards.
    1. Sturdy Construction - Made with durable materials for long-lasting performance and stable operation.
    2. Compact Design - Space-efficient footprint ideal for laboratory environments.
    3. Data Output Options- Some models offer USB or printer connectivity for result documentation.
    How to Use a Digital Elmendorf Tearing Tester:
    1. Prepare the Sample - Cut the material (fabric, paper, film, etc.) to standard size (typically 100 × 63 mm for textiles) and slit it with the pre-cutter as required.
    2. Select Pendulum Weight - Choose the appropriate pendulum or add counterweights based on expected tear strength.
    1. Calibrate the Machine - Set the pendulum to its starting position and zero the display.
    2. Clamp the Sample - Fix one half of the sample in the stationary clamp and the other in the moving clamp.
    3. Cut the Initial Slit - Use the integrated blade to make a precise cut at the marked slit area (usually 20 mm).
    1. Release the Pendulum - Trigger the pendulum to swing and tear the sample through the pre-slit.
    2. Read the Result - The digital display will show the tearing force automatically (in g, mN, or cN).
    3. Record or Export Data - Save or print the result if your model supports USB or printer connection.
    4. Reset for Next Test - Reposition the pendulum and prepare a new sample for the next cycle.
    Safety Tip: - Always ensure your hands are clear before releasing the pendulum.   Digital Elmendorf tearing tester Scope of application It is used for the determination of the tear resistance of various woven fabrics (Elmendorf method), and it can also be used for the determination of the tear resistance of thick paper, plastic sheeting, electrical tape, etc. Related standards GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734 etc. Instrument characteristics 1. Maximum 300N test range 2. Microcomputer control, digital decoding, support online communication 3. Color touch screen control, Chinese and English menu operation interface 4. Pneumatic clamping, automatic cutting 5. A variety of measurement units (cN, gf) selection 6. Fully automatic operation with safe operation protection. 7. Automatically increase potential energy [Technical parameter]: 1. Test range: first gear: (0～16)N second gear: (0～32)N third gear: (0～ 64)N fourth gear: (0～128)N fifth gear: (0～300)N 2. Test accuracy: ≤±0.2%F·S 3. Tearing length: 43mm (non-standard 30-60mm can be set) 4. Automatic incision length: (20±0.2)mm 5. Sample size: (100×63)mm 6. Specimen clamping: pneumatic way 7. Sample test: Up to 10 sets per group on the device side, and 30 sets of data can be selected to be saved 8. Power supply: AC220V±10% 50Hz 100W 9. Dimensions: (650×660×680)mm 10. Weight: 50kg [Sample of control interface]:(English version is also available.)
    Add to cart
    Quick view