Pneumatic bursting tester
360 product view
    Click to enlarge
    Oscillation Type Water Bath Dyeing Machine
    Oscillation type water bath Dyeing Machine $0.00
    Back to products
    Digital Elmendorf tearing tester
    Digital Elmendorf tearing tester $0.00

    Bursting strength tester

    $0.00

    Bursting strength tester

    Pneumatic bursting strength tester

    true burst

    Pneumatic bursting tester
    China national patent：ZL201210486480.8 ZL201220628425.3

    Pneumatic bursting strength tester
    China national patent：ZL201210486480.8 ZL201220628425.3
    [Scope of application]:
    It is used to measure the burst strength and burst expansion degree of various fabrics,
    including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other
    fabrics made by other processes, under standard conditions or wet conditions.

    This method is employed to assess the burst strength and degree of burst expansion of various types of fabrics, such as knitted, woven, non-woven, laminated, and others produced through different processes, under both standard and wet conditions.

    This technique is utilized to evaluate the burst strength and extent of burst expansion in various fabric types, including knitted, woven, non-woven, laminated, and others produced through diverse manufacturing processes, under both standard and wet conditions.

    Benefits of Bursting strength tester:

    Fast testing cycle for fast feedback to the production • Auto-start, a photocell detects the presence of a sample and automatically initiates a measurement sequence, thus allowing hands-free operation • Auto-cycling function permits the continuous cycling of the upper pressure foot to facilitate representative and continuous measurements

    • Available with automatic test strip feeder Measurements are simple to make with the Mullen type Bursting Strength Tester. Fast automatic measurements Measurement starts automatically once a test piece has been placed in the measuring gap. The clamping foot descends, and a bursting strength measurement is made.

    The sample is then quickly released and is ready for the next measurement at a new position. To maximize the sample measurement rate, the tester uses a minimum of time between the bursts, so that a series of 10 measurements can be done in less than 45 seconds. The actual measuring time depends of course on the type of paper or paper board being tested. Three

    Different test results can be reported after a single measurement; bursting strength standard, bursting strength compensated, and bursting energy absorption (BEA).Bursting strength tester can be compensated for the stiffness of the diaphragm For low bursting strength levels, the stiffness of the diaphragm can account for a large portion of the bursting strength value. If desired, the device can also measure, calculate, and report effective bursting strength compensated from the effects of the diaphragm.

    Measurement of Bursting Energy Absorption (BEA) is used to determine the energy absorption capability of a material. Strong, flexible paper has higher energy absorption values, while brittle, stiff paper has lower values. Bursting Strength Tester calculates and reports BEA according to the SCAN P 24 standard

    Related standards of Bursting strength tester:

    GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc.
    [Instrument characteristics]:
    1. Microcomputer control, automatic burst test, automatic correction, automatic data
    processing, and output results in the form of experimental report.
    2. Aerodynamics, high cleanliness.
    3. Color touch screen interface, Chinese and English menu operation, support online
    communication.

    1. Bursting pressure can reach up to 1.2MPa
      5. The maximum burst and expansion degree can reach 70mm.
      6. Strengthen the lighting system on the test surface.
      7. The main aerodynamic force helps to clamp the sample system.
      8. A variety of test areas are available, and the switching is easy.
    2. A variety of unit conversions between Chinese and English.
      10. Reliable anti-pinch safety protection design.
      [Technical parameter]:
      1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized)
      2. The minimum graduation value: 0.0001Mpa
      3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree
      pressurization.

    4. Test accuracy: ≤±0.2%F·S
    5. Thickness of elastic diaphragm: ≤2mm
    6. Testing area: cm²） 100 50 10 7.3 Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5
    7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min
    8. Safety cover: high-transparent plexiglass
    9. Power supply: AC220V±10% 50Hz 800W
    10. Dimensions: (470×490×780)mm (host L×W×H)

    Categories: , Tags: , , , Brand:
    Shipping & Delivery

    Related products

    Laboratory Mini Stenter Dryer

    Laboratory mini stenter Dryer

    ,
    $0.00
    Laboratory mini stenter Dryer
    Laboratory Mini Stenter Dryer

    Automatic fixing Dryer

      A Laboratory Mini Stenter Dryer is a compact, lab-scale machine designed to simulate the drying and heat-setting processes used in textile finishing. It mimics the function of industrial stenter machines but on a much smaller scale, making it ideal for testing fabric behavior, shrinkage, and finish quality under controlled conditions. Key Features:
    1. Controlled Heating System
    - Typically uses electric heating with adjustable temperature (up to 220–250°C). - Ensures uniform and precise temperature control.
    1. Adjustable Fabric Width
    - Equipped with clips or pins to hold and stretch fabric width-wise, simulating stenter frame action.  
    1. Variable Speed Conveyor - Allows control over fabric dwell time for drying or heat-setting.
    2. Compact and Bench-Top Design - Space-saving design ideal for textile labs and R&D units.
    3. Digital Controls - Easy-to-use digital interface for setting temperature, conveyor speed, and process time.
    1. Transparent Viewing Window - Allows operators to monitor fabric movement and drying visually.
    2. Low Energy Consumption - Designed for lab use, consuming less power than industrial models.
    Applications: - Heat-setting of synthetic fabrics.   Drying and curing of samples post-dyeing or printing. - Evaluating fabric shrinkage, dimensional stability, and finish behavior. - Testing chemicals and auxiliaries used in textile finishing.   Benefits of Laboratory Mini Stenter Dryer:
    1. Accurate Simulation of Production - Mimics industrial stenter conditions on a lab scale, ideal for pre-production testing and R&D.
    2. Cost-Effective Testing - Enables testing and fabric finishing without the high cost or space requirements of full-scale machines.
     
    1. Energy Efficient - Consumes less power compared to large stenters, making it economical for small-scale or frequent use.
    2. Precise Control - Offers accurate control of temperature, speed, and fabric tension, ensuring consistent results.
     
    1. Space-Saving Design - Compact and bench-top friendly, perfect for laboratories with limited space.
    2. Multiple Applications - Useful for drying, heat-setting, shrinkage testing, and evaluating chemical finishes.
     
    1. Faster Development Cycles - Speeds up new product development by allowing rapid sample testing and adjustments.
    2. Improved Fabric Quality - Helps optimize finishing parameters for better dimensional stability, hand feel, and appearance.
    3. Safe and User-Friendly- Designed with lab safety in mind, including temperature safety controls and easy operation.
      Features of Laboratory Mini Stenter Dryer:
    1. Compact Bench-Top Design - Ideal for laboratory use with limited space requirements.
    2. Adjustable Temperature Control - Precise heating (usually up to 220–250°C) with digital controllers for accurate processing.
     
    1. Variable Conveyor Speed- Allows adjustment of fabric dwell time for different drying or heat-setting needs.
    2. Width Adjustment Mechanism - Equipped with clips or pins to stretch and fix fabric width-wise, simulating industrial stenter conditions.
     
    1. Transparent Viewing Window - Enables visual monitoring of fabric movement and drying inside the chamber.
    2. Digital Display Panel- Easy-to-use interface for setting and monitoring temperature, speed, and time.
    3. Stainless Steel Construction- Durable and corrosion-resistant for long-term use at high temperatures.
     
    1. Uniform Heat Distribution- Ensures consistent fabric treatment across the width.
    2. Safety Features- Over-temperature protection and insulated body for operator safety.
    3. Versatile Applications - Suitable for drying, heat-setting, shrinkage testing, and chemical finish evaluations.
      Laboratory Mini Stenter Dryer dealer In Bangladesh, Lab Mini Stenter Dryer Importer in Bangladesh, Mini Stenter Dryer in Bangladesh, Laboratory Stenter Dryer in Bd, Lab Stenter Dryer In Uttara, Lab Stenter Price in Bangladesh, Laboratory Stenter Dryer in Bangladesh, Laboratory Mini Dryer in Bangladesh,   Automatic fixing dryer Application: used for simulating the production onsite to produce the textile that meets customer requirement, including the time、temperature、resin auxiliary agent formula, elongation of the same textile, and it is also can provide basis manufacture and to ensure the correctness of mass production. Basic design as Automatic Fixing Dryer,also connect external steam for printing sample steaming. Owing the wide adjusting ranges regarding temperature, humidity, dwelling time, this apparatus can be used for : a) Electric heating for drying, curing and thermofixation, room temp.~230℃. b) Steaming with saturated steam 102±2℃ c) Electric heating and steam together for HT steaming between 102±230℃ Textile Testing Instruments Automatic Fixing Dryer  dealer In Bangladesh, Automatic Fixing Dryer Importer in Bangladesh, Automatic Fixing Dryer in Bangladesh, Automatic Fixing Dryer  in Bd, Automatic Fixing Dryer  In Uttara, Automatic Fixing Dryer  Price in Bangladesh, Automatic Fixing Dryer  Supplier in Bangladesh, Lab Dryer Machine in Bangladesh, Rapid Dryer Mini Stanter in Bangladesh
    Add to cart
    Quick view
    Steam Soaping Machine
    Steam Soaping Machine

    Steam Soaping machine

    $0.00
    Steam Soaping Machine

    Steam Soaping Machine

    Steam Soaping Machine

    A Steam Soaping Machine is a specialized laboratory apparatus used in textile dyeing processes, particularly for post-dyeing treatments like soaping, which enhances color fastness and removes unfixed dyes from fabric samples. This machine is designed to perform soaping treatments on dyed textile samples using steam. Soaping is a critical step in dyeing, especially for reactive dyes, as it removes unfixed dye particles, ensuring better color fastness and preventing dye bleeding. The steam soaping process involves treating the dyed fabric with a soaping solution at elevated temperatures, facilitated by steam, to achieve optimal results. ⚙️ Key Features of Steam Soaping Machine - Beaker Material: Constructed with high-grade 316L stainless steel for excellent corrosion resistance and durability.- Operation Modes: Offers both automatic control and manual water filling options, providing flexibility in operation. - Drainage System: Equipped with an automatic drainage device for efficient removal of used solutions.- Temperature Control: Precise temperature regulation to maintain optimal soaping conditions.- Compact Design: Suitable for laboratory settings, occupying minimal space while delivering effective performance. ✅ Benefits of  Steam Soaping Machine - Enhanced Color Fastness: Effectively removes unfixed dyes, resulting in improved wash and rub fastness of the fabric.- Efficient Processing: Reduces the time required for post-dyeing treatments compared to conventional methods.- Consistent Results: Provides uniform treatment across samples, ensuring reproducibility in testing and quality control.- Resource Optimization: Minimizes water and chemical usage through controlled processing parameters.- Versatility: Applicable to various fabric types and dye classes, making it a valuable tool in research and development. Typical Applications - Laboratory Testing: Used in dyeing laboratories for evaluating the fastness properties of dyed samples. - Research and Development: Assists in developing and optimizing dyeing processes and formulations. - Quality Control: Ensures that dyed fabrics meet specified fastness standards before bulk production. In summary, a Steam Soaping Machine is an essential laboratory instrument in the textile industry, facilitating efficient and effective post-dyeing treatments to enhance the quality and durability of dyed fabrics. Features of Steam Soaping Machine:
    1. High-Grade Stainless Steel Beakers - Made from 316L stainless steel for excellent chemical and heat resistance.
    2. Steam-Based Heating - Uses direct or indirect steam to maintain consistent high temperatures ideal for soaping.
    1. Precise Temperature Control - Maintains stable temperatures (typically up to 98–100°C) for effective removal of unfixed dyes.
    2. Automatic and Manual Modes - Offers both programmable automatic cycles and manual operation for flexibility.
     
    1. Beaker Agitation or Rotation - Ensures uniform soaping action across fabric surfaces.
    2. Automatic Drainage System - Efficiently removes used soaping solution to speed up cycle changeovers.
    1. Compact Design - Fits well in lab settings while allowing multiple samples to be processed simultaneously.
    2. Safety Features - Includes pressure and temperature protection systems to ensure safe operation.
     
    1. Low Water and Chemical Use - Designed for minimal liquor ratios, enhancing sustainability.
    2. User-Friendly Interface - Simple digital controls or touch panel for easy operation and cycle programming.
    How to Use a Steam Soaping Machine:
    1. Prepare the Dyed Sample - After dyeing, rinse the fabric to remove surface dye and prepare it for soaping.
    2. Load the Fabric - Place the dyed fabric or sample into the beakers or holders inside the machine.
    1. Add Soaping Solution - Pour the prepared soaping agent (usually a detergent solution) into the beakers or tank as per recipe.
    2. Set Parameters
    - Use the control panel to set: - Temperature (usually 95–98°C) - Soaping time (typically 10–20 minutes) - Steam mode (direct or indirect, if applicable)  
    1. Start the Cycle - Begin the soaping process. The machine will heat the solution using steam and agitate/rotate the beakers for even treatment.
    1. Drain and Rinse - After the cycle ends, the machine may auto-drain. Rinse the fabric with warm water to remove residual chemicals.
    1. Unload the Samples - Carefully remove the fabric. Inspect for evenness and color fastness improvement.
    2. Clean the Machine - Rinse and dry the beakers or tank to maintain hygiene for the next use.
      Safety Tips: - Wear gloves and goggles. - Do not open the lid during operation. - Ensure steam connections are secure.       Steam Soaping machine used for sample soaping after dyeing in laboratory Beaker material: 316L S/S automatic control / manual filling water device, with automatic drainage device. Steam Soaping machine Dunlin price in Bangladesh Steam Soaping machine Dunlin in textile testing equipment Textile testing equipment in Bangladesh Textile testing equipment in Dhaka Textile testing equipment in Uttara MAAM tex Steam Soaping machine Dunlin price in Bangladesh
    Add to cart
    Quick view
    Fabric Stiffness Tester
    Fabric Stiffness Tester

    Fabric Stiffness Tester

    $0.00

    Fabric Stiffness Tester

    Fabric Stiffness Tester

    Fabric Stiffness Tester

      Fabric Stiffness Tester is a lab instrument used to measure the stiffness or flexural rigidity of fabric materials. It evaluates how resistant a fabric is to bending, which influences its drape, comfort, and handling characteristics. Purpose of Fabric Stiffness Tester: To determine the stiffness of textiles by measuring the bending length and calculating flexural rigidity, often using methods like the Cantilever Test (as per ASTM D1388 or ISO 9073-7).   Working Principle of Fabric Stiffness Tester: A fabric strip is slid over a horizontal platform until its free end bends under its own weight to a specific angle (usually 41.5°). The length at which this occurs is used to calculate bending length and stiffness.   Main Components of Fabric Stiffness Tester: - Test Platform: Flat surface for sample movement. - Graduated Scale: Measures the overhanging length of fabric. - Angle Indicator: Guides the measurement based on standard deflection angle. - Fabric Clamp or Guide: Helps place and move the sample smoothly.   Applications of Fabric Stiffness Tester: - Apparel fabrics (e.g., for comfort and drape analysis) - Technical textiles (e.g., automotive, medical fabrics) - Paper, nonwovens, and films Benefits of Fabric Stiffness Tester:
    1. Accurate Measurement of Flexibility - Provides reliable data on fabric stiffness, essential for quality control and product development.
    2. Improves Product Comfort - Helps assess how soft or rigid a fabric will feel in clothing or furnishings.
    3. Supports Material Selection - Aids designers and engineers in choosing the right fabric for specific applications based on stiffness.
     
    1. Quality Assurance - Detects fabric inconsistencies or defects that affect handling or drape.
    2. Standards Compliance - Enables testing as per international standards like ASTM D1388 and ISO 9073-7 for global product approval.
    3. Quick and Simple Operation - Delivers fast results with minimal operator training or preparation.
     
    1. Applicable to Multiple Materials - Suitable for woven, nonwoven, knitted fabrics, paper, and films.
    2. Enhances R&D Accuracy - Supports consistent material testing during product innovation and textile finishing.
      Features of Fabric Stiffness Tester:
    1. Graduated Measurement Scale - Precise scale to measure overhang length for accurate stiffness calculation.
    2. Flat Test Platform - Smooth, level surface ensures consistent and reliable fabric movement.
    3. Standard Deflection Angle Guide - Built-in 41.5° angle reference for consistent stiffness testing (per ASTM/ISO).
    4. Manual or Motorized Models - Available in both types for simple or automated operation depending on lab needs.
    5. Compact Design - Space-saving unit ideal for textile labs and quality control rooms.
     
    1. Sample Holder or Clamp - Ensures correct alignment and smooth feeding of fabric strips during testing.
    2. Durable Construction - Made of corrosion-resistant materials like stainless steel or aluminum for long-term use.
    3. Compliance with Standards - Supports methods like ASTM D1388, ISO 9073-7 for stiffness testing of fabrics.
     
    1. Lightweight and Portable - Easy to move and use in various lab settings.
    2. Low Maintenance - Simple mechanical parts require minimal servicing.
      How to Use Fabric Stiffness Tester (Cantilever Method):
    1. Prepare the Sample - Cut the fabric into a rectangular strip (e.g., 25 mm × 200 mm), as per standard.
    2. Place the Sample - Lay the fabric strip flat on the test platform with one end aligned at the zero mark.
    3. Slide the Fabric - Gently push the fabric forward so it slowly overhangs the platform.
     
    1. Watch for Deflection - Stop sliding when the free end of the fabric bends down to the reference angle (typically 41.5°).
    2. Read the Bending Length - Measure the overhang distance from the scale. This is the bending length (C).
    3. Calculate Flexural Rigidity
    - Use the formula: G = W × C³ Where: - G = Flexural rigidity (mg·cm) - W = Fabric weight per unit area (mg/cm²) - C = Bending length (cm)  
    1. Repeat for Accuracy - Test both warp and weft directions and average the results for better accuracy.
    Tip: Always perform the test in a controlled environment (standard temperature and humidity) for reliable results.         Fabric Stiffness Tester Scope of application It is used to measure the stiffness of cotton, wool, silk, linen, chemical fibers and other woven fabrics, knitted fabrics, general nonwovens, coated fabrics, etc. It is also suitable for measuring the stiffness of paper, leather, film and other flexible materials. Relevant Standards GB/T 18318, ASTM D 1388, IS09073-7, BS EN22313 etc. [Instrument Characteristics] 1. Infrared photoelectric invisible inclined plane detection system replaces the traditional tangible inclined plane, realizes non-contact detection, and overcomes the problem that the measurement accuracy is affected by the sample torsion lifted by the inclined plane. 2. The inclination adjustable mechanism of instrument measurement to meet different test requirements. 3. Stepping motor drive, accurate measurement, smooth operation; 4. The color touch screen display can show the extended length, bending length, bending stiffness of the sample, the warp average, the weft average and the total average of the above values respectively. 5. Printing of Chinese report forms for thermal printers. Technical parameters 1. Test methods: The two method (A method: Weft test, B method: Forward and backward test) 2. Measurement angle:41.5 degree, 43 degree and 45 degree adjustable 3. Extend the length range:5-220 mm (special requirements can be made at the time of ordering) 4. Length resolution:0.01mm 5. Measurement accuracy:±0.1mm 6. Specimen specifications:250×25mm 7. Work platform specifications:250×50mm 8. Specification of sample pressing plate:250×25mm 9. Pushing speed of press plate:3 mm/s; 4 mm/s; 5 mm/s 10. Display output: Touch screen display 11. Print Output: Chinese Report 12. Data Processing Volume: A total of 15 groups, each group less than 20 trials 13. Printer: Thermal printer 14, power supply:AC220V 50Hz 15. Host volume:570mm×360mm×490mm 16. Host weight:20kg
    Add to cart
    Quick view
    Stretch Recovery Tester (Static Method)

    Stretch Recovery Tester Static Method

    ,
    $0.00

    Stretch Recovery Tester – Static Method | ASTM D3107 / D2594 | Ready Stock Bangladesh

    Product Introduction

    The Stretch Recovery Tester – Static Method is a professional textile laboratory testing instrument designed to evaluate the stretch and recovery properties of elastic fabrics, knitted fabrics, stretch garments, ribbons and other extensible textile materials. The tester is suitable for Textile Testing Laboratories, Garment Factories, Fabric Manufacturers, QA/QC Departments, R&D Laboratories and Academic Textile Laboratories. ASTM D3107 / ASTM D2594 | Ready Stock in Bangladesh | Quick Delivery | Local Support

    Why Choose This Stretch Recovery Tester?

    • Ready Stock in Bangladesh
    • Suitable for textile and garment testing laboratories
    • Designed for stretch and recovery evaluation
    • Suitable for elastic and stretchable textile materials
    • Applicable to relevant ASTM testing methods
    • Easy laboratory operation
    • Compact and practical testing equipment
    • Competitive price in Bangladesh
    • Quick local delivery
    • Local sales and technical support from MAAM TEX

    Testing Standards

    The Stretch Recovery Tester is suitable for testing requirements related to:
    • ASTM D3107 – Stretch Properties of Fabrics
    • ASTM D2594 – Stretch Properties of Knitted Fabrics
    Testing procedure and applicable standard should be selected according to the material and customer's laboratory requirement.

    Scope of Application

    This equipment can be used for testing:
    • Stretch Fabrics
    • Knitted Fabrics
    • Elastic Fabrics
    • Stretch Garments
    • Sportswear Fabrics
    • Elastic Ribbons
    • Hosiery Materials
    • Textile Materials with Stretch Properties

    Suitable For

    • Textile Testing Laboratories
    • Garment Manufacturing Industries
    • Knitwear Factories
    • Fabric Mills
    • Sportswear Manufacturers
    • Elastic Fabric Manufacturers
    • Quality Control Laboratories
    • R&D Laboratories
    • Third-Party Testing Laboratories
    • Textile Universities & Institutes

    Key Advantages

    Ready Stock in Bangladesh

    No need to wait for overseas import. This product is available from MAAM TEX stock in Bangladesh, subject to current stock availability.

    Quick Delivery

    Local stock enables faster delivery compared with normal import-based supply.

    Competitive Price

    MAAM TEX provides competitive quotations for textile laboratory testing equipment.

    Local Support

    Professional sales and after-sales support are available for customers in Bangladesh.

    Laboratory Suitable

    A practical solution for routine quality control, product development and textile testing applications.

    Frequently Asked Questions

    What is a Stretch Recovery Tester?

    A Stretch Recovery Tester is a textile laboratory instrument used to evaluate the ability of a fabric or elastic textile material to stretch and recover after the application and removal of a specified load or extension.

    What standards are applicable?

    The equipment is intended for testing requirements associated with ASTM D3107 and ASTM D2594, depending on the material and test method.

    Who needs a Stretch Recovery Tester?

    Textile mills, garment factories, knitwear manufacturers, fabric manufacturers, QA/QC laboratories, R&D departments and textile testing laboratories can use this equipment.

    Is this machine available in Bangladesh?

    Yes. MAAM TEX offers this Stretch Recovery Tester from stock in Bangladesh, subject to current availability.

    Can I get a quotation?

    Yes. Contact MAAM TEX for the latest price, stock confirmation, delivery information and quotation.

    Ready Stock – Bangladesh

    No Need to Wait for Import

    Stretch Recovery Tester – Static Method Ready Stock | Competitive Price | Quick Delivery | Local Support For current stock status and quotation, please contact MAAM TEX.

    Call to Action

    Looking for a Stretch Recovery Tester in Bangladesh? Get the Stretch Recovery Tester – Static Method from MAAM TEX with ready-stock availability, competitive pricing and local support. Contact MAAM TEX today for Price & Stock Confirmation.

    Stretch Recovery Tester Static Method 

    Stretch Recovery Tester (Static Method)

    Stretch Recovery Tester

      A Stretch Recovery Tester Static Method is a lab instrument used to evaluate the stretch ability and recovery properties of fabrics, elastomers, or other stretchable materials. This method is crucial in textiles and material science to assess how well a material returns to its original shape after being stretched. Key Functions of Stretch Recovery Tester Static Method : - Measures elongation under a fixed force or length. - Assesses the recovery percentage after a specified recovery time once the force is removed. - Evaluates fabric's resilience, durability, and comfort properties. How It Works Stretch Recovery Tester  Static Method:
    1. A sample is stretched to a predetermined extension or force.
    2. The stretch is maintained for a set period.
    3. After removing the load, the recovery (return to original length) is measured after a fixed time.
    4. The fabric sample is clamped and stretched to a specific length or force.
    5. It’s held for a fixed duration (e.g., 1–5 minutes).
    6. The tension is released, and the sample is allowed to recover.
    7. The recovered length is measured after a set time.
    Main Components: - Fixed clamps to hold the sample. - Movable clamps for stretching. - Precision scale or ruler for measuring elongation and recovery. - Timing device (manual or digital) to control stretching and recovery periods. - To assess elastic recovery and dimensional stability after stretching. Applications: - Used in testing knitwear, sportswear, elastic fabrics, and compression garments. - Helps in product development and quality assurance. Stretch Recovery Tester Static Method is designed to determine the stretch recovery property of elastic material by static method. 2.0mm thickness stainless steel frame and base board, makes the tester firm and stable. Sample holder can be slid along the guide rail smoothly and can be fixed at any position of the rail. Test Scope：elastomeric material Testing Standards：ASTM D2594、ASTM D3107, etc. key features of a Stretch Recovery Tester Static Method: Adjustable clamps and measurement scale. - Timer for accurate stretch/recovery periods. - Simple mechanical design for ease of use. ✅ 1. Manual or Semi-Automatic Operation - Allows controlled stretching and recovery measurements. - Simple setup for routine quality control. ✅ 2. Adjustable Clamp System - Securely holds samples of various sizes and thicknesses. - Ensures consistent test conditions. ✅ 3. Precision Measurement Scale - Provides accurate readings of elongation and recovery length. - Often graduated in millimeters or inches. ✅ 4. Sturdy Frame - Made of corrosion-resistant metal or coated steel. - Ensures durability and stability during testing. ✅ 5. Time Control Support - Timer to monitor stretch and recovery durations. - Helps standardize test procedures. ✅ 6. Compact Design - Space-saving for lab environments. - Easy to move and operate. ✅ 7. Compliance with Standards - Often designed to meet standards like ASTM D3107 or BS 4294. Would you like a comparison with the dynamic method or specifications for a particular model? key benefits of using a Stretch Recovery Tester Static Method: ✅ 1. Accurate Fabric Performance Analysis- Provides reliable data on stretch and recovery, critical for assessing elasticity and fit. ✅ 2. Easy to Operate- Simple, manual setup makes it ideal for routine testing and quality control. ✅ 3. Cost-Effective- More affordable than dynamic testers, making it suitable for smaller labs or production units. ✅ 4. Standardized Testing- Supports industry-standard methods (e.g., ASTM D3107), ensuring consistency across tests. ✅ 5. Versatile Applications- Suitable for testing knit fabrics, elastic bands, spandex materials, and other stretchable textiles. ✅ 6. Durable and Low Maintenance- Mechanically straightforward with minimal upkeep required. ✅ 7. Enhances Product Development- Helps designers and manufacturers optimize materials for comfort, performance, and durability. Applications: - Textile R&D - Production quality control
    Stretch Recovery Tester (Static Method)

    Stretch Recovery Tester

    - Evaluating materials for comfort, durability, and fit Stretch Recovery Tester Diller In Bangladesh, Stretch Recovery Tester Importer In Bangladesh, Stretch Recovery Tester in Bangladesh, Stretch Recovery Tester in Bd, Stretch Recovery Tester In Uttara, Stretch Recovery Tester Price in Bangladesh, Stretch Recovery Tester Supplier in Bangladesh  
    Add to cart
    Quick view

    ICI Pilling & Snagging Test Machine

    $0.00
    ICI Pilling & Snagging Test Machine An ICI Pilling & Snagging Test Machine is a specialized laboratory instrument designed to
    Add to cart
    Quick view
    New
    Fabric air permeability tester

    Fabric air permeability tester

    ,
    $0.00
    Fabric Air Permeability Tester
    Fabric air permeability tester

    Fabric air permeability tester

      Fabric Air Permeability Tester is a lab instrument used to measure how easily air passes through a fabric. It quantifies the air permeability, which is crucial for evaluating breathability, comfort, and functional performance in textiles. Purpose Fabric Air Permeability Tester: It determines the rate of airflow through a fabric sample under a set air pressure, typically reported in units like cm³/cm²/s or L/m²/s. Working Principle: The tester creates a pressure difference across the fabric sample and measures the volume of air flowing through it. Higher air permeability means the fabric is more breathable. Main Components of Fabric Air Permeability Tester: - Test Head / Clamp: Holds the fabric securely without leakage. - Pressure Regulator: Maintains a constant air pressure during testing. - Flow Meter or Digital Sensor: Measures the actual airflow rate through the fabric. - Display Unit: Shows readings of air permeability instantly.   Applications of Fabric Air Permeability Tester: - Performance textiles (sportswear, PPE) - Technical fabrics (filters, tents, airbags) - Medical textiles (masks, gowns) - Nonwovens and industrial materials   Benefits of Fabric Air Permeability Tester:
    1. Accurate Breathability Measurement - Precisely measures how breathable a fabric is, essential for comfort and performance.
    2. Supports Quality Control - Ensures consistent air permeability in fabric batches, critical for products like PPE, sportswear, and filters.
     
    1. Enhances Product Design - Helps in selecting or engineering fabrics with the right airflow properties for specific uses.
    2. Standard Compliance - Conforms to international testing standards (e.g., ASTM D737, ISO 9237), ensuring global credibility.
    3. Quick and Reliable Testing - Provides rapid results, increasing lab efficiency and production decision-making speed.
     
    1. Wide Material Compatibility - Suitable for woven, nonwoven, knitted fabrics, and even paper or coated materials.
    2. Improves Functional Performance - Helps optimize products for ventilation, moisture control, and thermal comfort.
    3. Reduces Product Failure - Identifies underperforming fabrics early, minimizing risks in high-performance applications.
    Features of Fabric Air Permeability Tester:
    1. Digital Display - Shows air permeability readings clearly in units like L/m²/s or cm³/cm²/s.
    2. Precise Test Head/Clamp - Provides an airtight seal to prevent air leakage and ensure accurate results.
    3. Adjustable Pressure Settings - Allows testing under various pressure drops (e.g., 10–2500 Pa), depending on fabric type.
     
    1. Automatic Airflow Measurement - Built-in sensors or flow meters capture airflow rate automatically for quick analysis.
    2. Multiple Test Area Sizes - Interchangeable test plates to match different sample sizes and standard requirements.
    3. Data Logging and Export - Some models include USB or software connectivity for storing and exporting test results.
     
    1. Standard Compliance - Conforms to ASTM D737, ISO 9237, BS 5636, DIN 53887, etc.
    2. Robust Construction - Built with corrosion-resistant materials and durable components for long-term lab use.
    3. Low Maintenance - Simple cleaning and calibration process for reliable performance.
    4. Compact and User-Friendly Design - Ideal for lab benches and easy operation with minimal training.
    How to Use Fabric Air Permeability Tester:
    1. Prepare the Sample - Cut the fabric sample to the required size (usually circular, e.g., 20 cm²).
    2. Mount the Sample - Place the fabric securely in the test clamp or holder, ensuring no wrinkles or gaps.
    3. Set Test Parameters - Adjust the air pressure drop according to the fabric type or standard (e.g., 100 Pa).
     
    1. Start the Test - Turn on the air supply and start the airflow through the fabric.
    2. Read the Measurement - The digital display will show the air permeability value in the selected units.
    3. Record the Results - Note the readings or export data if the device supports it.
    4. Repeat if needed - Test multiple samples or areas for accuracy and average the results.
    5. Clean and Maintain - After testing, clean the clamp and ensure the device is calibrated regularly.
      Tip: Ensure the test environment maintains standard temperature and humidity for consistent results.   Fabric Air Permeability Tester Appliance Range It is used to TEST the air permeability of various textile fabrics, including industrial fabrics, nonwoven fabrics and other textile products and other breathable materials. Related Standards GB / T 5453, GB / T 13764, ISO 9237, ISO 5636, ASTM D737, etc. Instrument characteristics 1. Automatic sample clamping, automatic nozzle replacement, and quick test. 2. Microcomputer processing, the test results are displayed directly, without manual table calculation; 3. Built-in continuous test mode, the test unit can be switched as needed. 4. Chinese LCD menu operation, configure computer interface. Technical parameter 1. Range of sample pressure difference: 1 ～ 4000Pa 2. Measurable air permeability: 1 ～ 40,000mm / s 3. Measurement error: ≤ ± 2% 4. Measurable fabric thickness: ≤8mm 5. Test area: 5cm2; 20cm2; 50cm2; 100cm2 Ф50mm (≈19.6cm2) Ф70mm (≈38.5cm2) 6. Nozzles: 11 in total (automatic replacement of digital setting) CODE 00 01 02 03 04 05 06 07 08 09 10 DIAφ（mm） 0.8 1.2 2 3 4 6 8 10 12 16 20 7.Data Capacity:≤200 times tests 8.Power Supply：AC220V 50Hz 2KW 9.Weight：80Kg 10.Shape：1250×700×1250mm
    Add to cart
    Quick view
    digital-precision-balance

    Digital precision balance

    ,
    $0.00

    digital precision balance

    digital-precision-balance

    2/3/4/5 Digit Digital precision Balance

    digital precision balance is a weight balance machine. It’s used to Low capacity balance. digital precision balance  play an important role to accurate measurement. Digital precision balance is used to check weight paper, jewelry etc. It shows accurate result. We have the best collection of digital precision balance. MAAM TEX IS the best supplier of Precision Balance in Bangladesh
    A Digital Precision Balance is a high-accuracy electronic weighing device used in laboratories, industries, and educational institutions for measuring mass with a high degree of precision. It is essential for tasks that require meticulous weight measurements, such as chemical analysis, formulation, and quality control. Key Features:
    1. High Accuracy & Precision: - Typically offers readability from 0.1 g to 0.001 g (or even finer). - Ideal for weighing small amounts of material where accuracy is crucial.
    2. Digital Display: - Large, backlit LCD or LED display for easy reading. - Some models include touch screen interfaces.
    3. Tarring Function: - Allows you to subtract the weight of a container or packaging to get the net weight.
    4. Calibration: - Internal or external calibration to maintain accuracy over time. - Some advanced models have auto-calibration features.
    5. Weighing Units: - Supports multiple units like grams (g), milligrams (mg), carats (ct), and ounces (oz). Stable Platform:   - Includes a draft shield to protect against air currents and vibrations, which can affect measurement accuracy.
    Common Applications:- Laboratory Analysis: Precise measurement of chemicals and reagents.- Pharmaceuticals: Formulation and quality control.- Jewelry: Accurate measurement of precious metals and stones.- Education: Scientific experiments in schools and universities. Benefits:- Reliable and Consistent Measurements- User-Friendly Operation- Compact Design with Minimal Footprint- Improved Workflow Efficiency- Enhanced Data Handling (USB or RS232 ports for data transfer in advanced models) Benefits of digital precision balance Here are the key benefits of using a Digital Precision Balance:
    1. High Accuracy and Precision- Delivers extremely accurate weight measurements, often down to 0.001 g or better.- Crucial for experiments and applications where even slight variations can affect outcomes.
     
    1. User-Friendly Interface- Digital display makes readings easy to read and interpret.- Most models include intuitive controls for functions like tarring, unit conversion, and calibration.3. Speed and Efficiency- Provides instant, stable readings, saving time compared to manual or mechanical balances.- Streamlines lab workflows and enhances productivity.
    2. Versatile Applications- Suitable for various fields including chemistry, biology, pharmacology, food testing, and gemology.- Can handle diverse weighing tasks from solids to liquids and powders.
    3. Advanced Features- Tare Function: Subtracts the weight of containers automatically.- Multiple Weighing Units: Supports various measurement units.- Data Connectivity: Many models allow connection to computers or printers for data logging.
    4. Portability and Space Efficiency- Compact design fits easily in most laboratory setups.- Lightweight models are easy to move and store.
    5. Enhanced Safety and Reliability- Stable platform and draft shields reduce environmental interference.- Built-in calibration ensures ongoing accuracy.
    Here’s a step-by-step guide on how to use a Digital Precision Balance safely and accurately: 1. Set Up the Balance- Place the balance on a stable, vibration-free, and level surface.- Avoid placing near fans, windows, or air vents to prevent air drafts.- Allow the balance to warm up (usually 15–30 minutes) if it has just been turned on. ⚙️ 2. Calibrate the Balance - If it’s manual calibration, use certified calibration weights. - For auto-calibration models, follow on-screen instructions. - Calibration ensures accuracy in measurements. ⚖️ 3. Tare the Balance - Place the container or weighing paper on the balance. - Press the “Tare” or “Zero” button to set the display to zero. This subtracts the container’s weight. 4. Weigh the Sample - Carefully add the sample into the container. - Wait for the reading to stabilize (usually indicated by a stable icon or beep). - Read the weight from the digital display. 5. Repeat or Change Units (if needed) - You can press the unit button to switch between grams, milligrams, ounces, etc., depending on your needs.   6. Clean After Use - Remove any spilled substances. - Wipe the surface with a soft, lint-free cloth. Do not use harsh chemicals unless specified by the manufacturer. ⚠️ Tips for Best Use: - Avoid touching the container with bare hands (use tweezers or gloves to avoid adding extra weight from oils or moisture).- Use a draft shield if available to minimize airflow interference.- Do not overload the balance beyond its maximum capacity—it can damage the sensors.
    Add to cart
    Quick view
    VeriVide Original D65 Tube Light Artificial Daylight 6500K
    Color Matching Cabinet -light Box

    VeriVide Original D65 Tube light

    , , ,
    $0.00

    VeriVide Original D65 Tube Light – Artificial Daylight

    VeriVide Original D65 Tube Light Artificial Daylight 6500K

    VeriVide Original D65 Artificial Daylight Tube Light – 6500K, CRI 98

    Original VeriVide D65 Artificial Daylight Tube Light for Accurate Colour Assessment

    VeriVide Original D65 Tube Light – Artificial Daylight is a professional standardized daylight light source designed for accurate and consistent visual colour assessment. With a correlated colour temperature of 6500K and high CRI 98, the VeriVide D65 provides a controlled artificial daylight environment for evaluating colours, shades, textiles, garments, printed materials, plastics, paints, packaging and other products where colour consistency is critical.

    Natural daylight changes according to the time of day, weather, season, geographical location and surrounding conditions. These changes can create differences in visual colour evaluation. A standardized D65 artificial daylight source provides a controlled lighting condition so that colour decisions can be made consistently. VeriVide explains that using the same standardized artificial light source throughout the supply chain helps reduce problems caused by variations in natural daylight.

    The VeriVide Original D65 Artificial Daylight Tube is therefore an important replacement or lighting component for professional colour assessment cabinets, viewing systems and suitable standardized visual inspection environments.

    Product Overview

    Specification Details
    Product Name VeriVide D65 Artificial Daylight Tube Light
    Brand VeriVide
    Light Source D65 Artificial Daylight
    Correlated Colour Temperature 6500K
    Colour Rendering Index CRI 98
    Lamp Type T8
    Available Length 600 mm / 1200 mm / 1500 mm
    Available Power 18W / 36W / 58W
    Application Colour Assessment & Visual Inspection
    Colour Evaluation Standardized Artificial Daylight
    Typical Use Textile, Garments, Printing, Packaging, Paint, Plastic & Manufacturing
    Manufacturer VeriVide
    Product Codes 600D65 / 1200D65 / 1500D65

    Specifications are based on VeriVide's published lamp information. Availability of individual lengths/models should be confirmed at the time of order.

    What is VeriVide D65 Artificial Daylight?

    VeriVide Original D65 Tube light is a standardized daylight illuminant representing daylight with a correlated colour temperature of approximately 6500 Kelvin. VeriVide describes D65 as the international standard measure of daylight based around a mean colour temperature of 6500K.

    The purpose of D65 lighting is not simply to provide a bright white light. Instead, it provides a standardized spectral lighting condition suitable for professional visual colour assessment.

    Two products can sometimes appear to have the same colour under one light source but look different under another. This phenomenon is known as metamerism. For this reason, professional colour assessment requires controlled and standardized illumination. VeriVide specifically highlights the importance of viewing colour samples under standardized lighting conditions to identify colour differences and metameric effects.

    VeriVide Original D65 Tube light is engineered for this type of controlled colour assessment environment.

    Why Choose Original VeriVide D65 Tube Light?

    Colour evaluation is an important part of quality control in many industries. A small difference in colour can result in rejection of fabric, garments, packaging, printed materials or finished products.

    Using ordinary room lighting or an uncontrolled daylight source may produce inconsistent visual results. The VeriVide D65 provides a standardized artificial daylight source designed specifically for professional colour assessment.

    Key advantages include:

    • 6500K standardized D65 daylight
    • High CRI 98
    • Designed for accurate visual colour assessment
    • Consistent lighting conditions
    • Suitable for professional colour matching
    • Helps reduce variations caused by natural daylight
    • Suitable for colour assessment equipment and viewing systems
    • Available in multiple tube lengths
    • Suitable for textile and garment quality control
    • Useful for identifying colour differences and metamerism
    • Original VeriVide replacement lamp

    VeriVide states that its D65 lamp has a CRI of 98, allowing colours to be rendered more accurately than lower-CRI light sources.

    Technical Specifications

    1. Correlated Colour Temperature – 6500K

    VeriVide Original D65 Tube light has a 6500K correlated colour temperature.

    6500K is the defining colour-temperature characteristic of D65 artificial daylight. It produces a cool daylight appearance suitable for professional colour evaluation.

    This is particularly important when colour standards and product samples need to be compared under controlled lighting conditions.

    2. High Colour Rendering Index – CRI 98

    VeriVide Original D65 Tube light is specified with a CRI of 98.

    CRI, or Colour Rendering Index, indicates how accurately a light source renders colours in comparison with a reference light source. A higher CRI is generally desirable for visual colour assessment because it allows colours to be represented more accurately.

    For applications such as textile shade matching, garment inspection and product colour comparison, high colour rendering performance is an important consideration. VeriVide lists its D65 lamp with CRI 98.

    3. T8 Tube Design

    The VeriVide D65 fluorescent lamp is available in T8 format.

    The T8 designation refers to the tube diameter/type used by the lamp. The official VeriVide specification lists D65 versions in 600 mm, 1200 mm and 1500 mm lengths, with corresponding 18W, 36W and 58W power ratings.

    Available VeriVide D65 Models

    VeriVide 600D65

    • Length: 600 mm
    • Power: 18W
    • Tube Type: T8
    • CCT: 6500K
    • CRI: 98
    • Product Code: 600D65

    VeriVide 1200D65

    • Length: 1200 mm
    • Power: 36W
    • Tube Type: T8
    • CCT: 6500K
    • CRI: 98
    • Product Code: 1200D65

    VeriVide 1500D65

    • Length: 1500 mm
    • Power: 58W
    • Tube Type: T8
    • CCT: 6500K
    • CRI: 98
    • Product Code: 1500D65

    These three D65 configurations are listed in VeriVide's official lamp specification.

    Application of VeriVide Original D65 Tube light

    The VeriVide D65 Artificial Daylight Tube is suitable for applications where standardized daylight illumination is required for visual inspection and colour assessment.

    Textile Industry

    The textile and garment industry is one of the major applications for D65 artificial daylight.

    Textile manufacturers, dyeing factories, garment factories, buying houses and quality-control laboratories need to compare fabric samples, dyed yarns, garments and colour standards under controlled lighting.

    Typical applications include:

    • Fabric shade matching
    • Garment colour inspection
    • Yarn colour comparison
    • Dyed fabric inspection
    • Colour approval
    • Lab dip assessment
    • Bulk production shade checking
    • Colour standard comparison
    • Final garment inspection
    • Buyer sample approval

    Using standardized lighting helps different departments and organizations evaluate the same colour under similar viewing conditions.

    Colour Matching

    Colour matching requires more than simply checking whether two samples look similar.

    A sample may appear acceptable under one light source but show a noticeable difference under another light source. This is particularly important in textile, garment and manufacturing applications.

    VeriVide Original D65 Tube light provides a standardized daylight reference for visual assessment.

    For example, a laboratory may compare:

    Approved Colour Standard → Lab Dip → Bulk Fabric

    All three samples can be evaluated under the same D65 lighting condition.

    This provides a more controlled environment for colour decisions.

    Metamerism Assessment

    Metamerism occurs when two colours appear to match under one lighting condition but appear different under another.

    This can create serious problems in textile and product manufacturing.

    For example:

    • Fabric A may match the approved standard under one light.
    • Under daylight, Fabric A may appear different.
    • Under store lighting, the difference may become even more noticeable.

    VeriVide Original D65 Tube light recommends standardized viewing environments because changing illumination can reveal colour differences that may not be visible under another light source.

    VeriVide Original D65 Tube light light source can therefore form an important part of a professional colour assessment system.

    Use in VeriVide Colour Assessment Cabinets

    VeriVide colour assessment cabinets can be configured with standardized light sources including D65 and D50, along with other illuminants depending on the application.

    The D65 tube is particularly useful where daylight-standard colour assessment is required.

    A typical colour assessment cabinet may contain multiple light sources to allow the operator to check colour behaviour under different lighting conditions.

    This can help identify:

    • Colour inconsistency
    • Metamerism
    • Shade variation
    • Fluorescence-related appearance
    • Differences between product and colour standard

    Use in Textile Testing Laboratories

    Textile testing laboratories require controlled and repeatable environmental conditions for visual assessments.

    VeriVide Original D65 Tube light can be used as part of an appropriate viewing cabinet or visual inspection system for:

    • Colour fastness assessment
    • Shade evaluation
    • Fabric colour grading
    • Garment inspection
    • Pilling assessment
    • Appearance assessment
    • Colour matching
    • Standard comparison

    VeriVide Original D65 Tube light own textile testing equipment uses CIE D65 artificial daylight for standardized visual assessment applications. For example, its Pilling Assessment Viewer uses VeriVide CIE D65 Artificial Daylight for assessment under relevant EN ISO 12945 methods.

    Colour Fastness Assessment

    Visual evaluation is also important in textile colour fastness testing.

    A controlled D65 light source can provide standardized viewing conditions when comparing test specimens with reference standards.

    VeriVide's Colour Fastness Cabinet, for example, uses D65 Artificial Daylight at 6500K as one of its standardized light sources, together with UV black light for relevant assessment applications.

    Benefits for Garment Manufacturers

    For garment manufacturers, colour consistency is essential from sampling through bulk production.

    The VeriVide Original D65 Tube light can help establish a controlled visual environment for:

    Sampling

    Compare the original colour standard with lab dips and development samples.

    Production

    Check whether bulk production remains within the approved colour range.

    Quality Control

    Evaluate finished garments before shipment.

    Buyer Inspection

    Provide a standardized environment for colour approval.

    Final Inspection

    Reduce the possibility of colour disputes caused by inconsistent lighting.

    Benefits for Textile Dyeing Factories

    In dyeing factories, colour decisions are often made at several stages.

    These may include:

    1. Recipe development
    2. Lab dip preparation
    3. Lab dip approval
    4. Bulk dyeing
    5. Shade checking
    6. Finishing
    7. Final inspection
    8. Shipment inspection

    Using a standardized VeriVide Original D65 Tube light source can help maintain consistent visual conditions across these stages.

    This is especially useful when several people are involved in colour evaluation.

    Standards and Compliance

    The VeriVide Original D65 Tube light is specified by VeriVide for use as a D65 artificial daylight source.

    According to VeriVide's published lamp information, the D65 lamp has a 6500K correlated colour temperature, is within the tolerances prescribed in BS 950 Part 1, and has high conformance to relevant CIE specifications for accurate colour matching. VeriVide's current documentation also references ISO/CIE 23603 / CIE S 012/E for D65 applications.

    Depending on the particular testing method, viewing cabinet and industry application, additional standards may apply. Users should always verify the exact lighting requirements specified by their applicable test method, buyer or customer.

    Why Standardized Lighting Matters

    Natural daylight is not constant.

    It can change due to:

    • Time of day
    • Weather
    • Season
    • Geographic location
    • Atmospheric conditions
    • Window orientation
    • Surrounding environment

    Because of these factors, a colour sample may look different at different times or locations.

    VeriVide notes that these natural-light variations can cause colour consistency problems throughout a supply chain. Standardized artificial light provides a controlled alternative.

    For international textile and garment supply chains, this is especially important because a buyer, manufacturer and supplier may be located in different countries.

    VeriVide D65 vs Ordinary Daylight

    Feature VeriVide D65 Ordinary Natural Daylight
    Standardized Yes No
    Colour Temperature 6500K Variable
    Controlled Environment Yes No
    Colour Assessment Professional Variable
    Repeatability High Low
    Weather Dependent No Yes
    Time-of-Day Dependent No Yes
    Suitable for Standardized Colour Evaluation Yes Not recommended as sole reference

    The purpose of VeriVide D65 is therefore to provide a more consistent and controlled lighting condition than relying on natural daylight alone.

    VeriVide Original D65 Tube Replacement

    For existing VeriVide viewing cabinets and compatible systems, correct lamp replacement is important.

    VeriVide recommends replacing lamps after their specified service life because the spectral output of lamps can change with usage. The manufacturer notes a 2000-hour life-cycle recommendation for its lamps and recommends replacement after 2000 hours or one year of use to maintain reliable colour assessment conditions.

    When replacing a lamp, users should verify:

    • Correct VeriVide D65 specification
    • Correct tube length
    • Correct wattage
    • Correct tube type
    • Compatibility with the existing equipment
    • Applicable voltage and ballast requirements

    How to Select the Correct D65 Tube

    Before ordering a replacement VeriVide D65 tube, check the existing lamp.

    Step 1 – Check the Length

    Measure the existing tube.

    Available VeriVide D65 lengths include:

    • 600 mm
    • 1200 mm
    • 1500 mm

    Step 2 – Check Wattage

    The corresponding official specifications are:

    • 600 mm – 18W
    • 1200 mm – 36W
    • 1500 mm – 58W

    Step 3 – Check Tube Type

    The listed D65 versions are T8.

    Step 4 – Check Equipment Compatibility

    If the lamp is being installed into a VeriVide viewing cabinet or colour assessment equipment, confirm the equipment model before ordering.

    Step 5 – Confirm Original Product Requirement

    For professional colour assessment, use the correct standardized lamp rather than an ordinary commercial daylight tube.

    Suitable Industries

    The VeriVide Original D65 Tube Light can be relevant to many industries, including:

    Textile & Garments

    Fabric, yarn, garment and shade evaluation.

    Dyeing & Finishing

    Lab dip and bulk shade comparison.

    Printing

    Visual colour checking of printed materials.

    Packaging

    Colour consistency of packaging materials.

    Plastics

    Colour and appearance inspection.

    Paint & Coating

    Visual colour comparison.

    Automotive

    Component colour and appearance assessment.

    Furniture

    Fabric, leather, plastic and surface colour evaluation.

    Graphic Arts

    Visual inspection under controlled lighting where the relevant D65 specification is applicable.

    Key Features at a Glance

    VeriVide Original D65 Tube light offers:

    • Original VeriVide D65 light source
    • 6500K correlated colour temperature
    • CRI 98
    • T8 tube format
    • Multiple length options
    • Standardized artificial daylight
    • Professional colour assessment
    • Consistent visual inspection conditions
    • Suitable for textile and garment industries
    • Suitable for colour matching
    • Useful for metamerism assessment
    • Suitable for compatible VeriVide equipment
    • Professional replacement lamp solution

    Frequently Asked Questions

    What is a VeriVide D65 Tube Light?

    VeriVide D65 is a standardized artificial daylight lamp designed to provide controlled D65 illumination for professional visual colour assessment.

    What is the colour temperature of VeriVide D65?

    The VeriVide D65 Artificial Daylight Tube has a correlated colour temperature of 6500K.

    What is the CRI of VeriVide Original D65 Tube light ?

    The official VeriVide specification lists the D65 lamp with CRI 98.

    What lengths are available?

    The official specification lists 600 mm, 1200 mm and 1500 mm versions.

    What are the wattages?

    The listed versions are 18W, 36W and 58W, corresponding respectively to 600 mm, 1200 mm and 1500 mm lengths.

    Is VeriVide Original D65 Tube light suitable for textile colour matching?

    Yes. D65 standardized daylight is widely used in controlled visual colour assessment, including textile and garment applications. VeriVide specifically describes D65 as being specified for applications where colour consistency and quality need to be maintained.

    Why should I use Original VeriVide D65 instead of an ordinary 6500K tube?

    A tube being labelled “6500K” does not by itself make it a standardized VeriVide D65 colour-assessment lamp. Professional colour assessment depends on the characteristics of the light source, not only its nominal colour temperature. VeriVide's D65 lamp is designed and specified as an artificial daylight source for standardized colour assessment.

    When should the D65 lamp be replaced?

    VeriVide recommends replacement after approximately 2000 hours or one year of use to maintain reliable assessment conditions.

    Can this lamp be used in any T8 fixture?

    Not necessarily. Compatibility with the fixture, ballast, electrical requirements and intended application should be checked before installation.

    Product Applications

    VeriVide D65 Artificial Daylight Tube Light is suitable for:

    • Textile Testing Laboratory
    • Garment Factory
    • Dyeing Factory
    • Fabric Inspection
    • Colour Matching Laboratory
    • Quality Control Laboratory
    • Buying House
    • Apparel Industry
    • Printing Industry
    • Packaging Industry
    • Plastic Industry
    • Paint Industry
    • Product Inspection
    • Colour Assessment Cabinet
    • Viewing Cabinet
    • Visual Inspection System

    Why Buy VeriVide D65 from MAAM TEX?

    MAAM TEX supplies textile testing instruments, laboratory equipment, colour assessment products and related consumables for textile and garment industries.

    For customers requiring VeriVide Original D65 Artificial Daylight Tube Light, we can provide the appropriate specification based on your existing equipment, required tube length and application.

    Before placing an order, please provide:

    1. Required quantity
    2. Tube length – 600 / 1200 / 1500 mm
    3. Existing machine/cabinet model, if applicable
    4. Required wattage
    5. Photo of the existing tube, if available

    This information helps ensure that the correct replacement lamp is supplied.

    Ordering Information

    Product:

    VeriVide Original D65 Tube Light – Artificial Daylight

    Available Options:

    600D65
    600 mm / 18W / T8 / 6500K / CRI 98

    1200D65
    1200 mm / 36W / T8 / 6500K / CRI 98

    1500D65
    1500 mm / 58W / T8 / 6500K / CRI 98

     current stock Available  

    Conclusion

    The VeriVide Original D65 Tube Light – Artificial Daylight is a professional standardized daylight source for controlled visual colour assessment. With 6500K colour temperature and CRI 98, it is designed for applications where colour consistency, repeatability and accurate visual evaluation are important.

    For textile and garment manufacturers, dyeing factories, testing laboratories, buying houses and quality-control departments, a standardized D65 lighting environment can help create more consistent colour evaluation conditions and reduce problems associated with variable natural daylight.

    For compatible VeriVide equipment and professional colour assessment applications, selecting the correct Original VeriVide D65 lamp is important for maintaining the intended lighting conditions of the system.

    Add to cart
    Quick view