Showing 1–12 of 25 results

Show sidebar
Show 9 12 18 24
Pneumatic bursting tester

Bursting strength tester

,
$0.00
Bursting strength tester

Pneumatic bursting strength tester

true burst

Pneumatic bursting tester China national patent：ZL201210486480.8 ZL201220628425.3 Pneumatic bursting strength tester China national patent：ZL201210486480.8 ZL201220628425.3 [Scope of application]: It is used to measure the burst strength and burst expansion degree of various fabrics, including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other fabrics made by other processes, under standard conditions or wet conditions. This method is employed to assess the burst strength and degree of burst expansion of various types of fabrics, such as knitted, woven, non-woven, laminated, and others produced through different processes, under both standard and wet conditions. This technique is utilized to evaluate the burst strength and extent of burst expansion in various fabric types, including knitted, woven, non-woven, laminated, and others produced through diverse manufacturing processes, under both standard and wet conditions. Benefits of Bursting strength tester: Fast testing cycle for fast feedback to the production • Auto-start, a photocell detects the presence of a sample and automatically initiates a measurement sequence, thus allowing hands-free operation • Auto-cycling function permits the continuous cycling of the upper pressure foot to facilitate representative and continuous measurements
  • Available with automatic test strip feeder Measurements are simple to make with the Mullen type Bursting Strength Tester. Fast automatic measurements Measurement starts automatically once a test piece has been placed in the measuring gap. The clamping foot descends, and a bursting strength measurement is made.
The sample is then quickly released and is ready for the next measurement at a new position. To maximize the sample measurement rate, the tester uses a minimum of time between the bursts, so that a series of 10 measurements can be done in less than 45 seconds. The actual measuring time depends of course on the type of paper or paper board being tested. Three Different test results can be reported after a single measurement; bursting strength standard, bursting strength compensated, and bursting energy absorption (BEA).Bursting strength tester can be compensated for the stiffness of the diaphragm For low bursting strength levels, the stiffness of the diaphragm can account for a large portion of the bursting strength value. If desired, the device can also measure, calculate, and report effective bursting strength compensated from the effects of the diaphragm. Measurement of Bursting Energy Absorption (BEA) is used to determine the energy absorption capability of a material. Strong, flexible paper has higher energy absorption values, while brittle, stiff paper has lower values. Bursting Strength Tester calculates and reports BEA according to the SCAN P 24 standard Related standards of Bursting strength tester: GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc. [Instrument characteristics]: 1. Microcomputer control, automatic burst test, automatic correction, automatic data processing, and output results in the form of experimental report. 2. Aerodynamics, high cleanliness. 3. Color touch screen interface, Chinese and English menu operation, support online communication.
  1. Bursting pressure can reach up to 1.2MPa 5. The maximum burst and expansion degree can reach 70mm. 6. Strengthen the lighting system on the test surface. 7. The main aerodynamic force helps to clamp the sample system. 8. A variety of test areas are available, and the switching is easy.
  2. A variety of unit conversions between Chinese and English. 10. Reliable anti-pinch safety protection design. [Technical parameter]: 1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized) 2. The minimum graduation value: 0.0001Mpa 3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree pressurization.
4. Test accuracy: ≤±0.2%F·S 5. Thickness of elastic diaphragm: ≤2mm 6. Testing area: cm²） 100 50 10 7.3 Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5 7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min 8. Safety cover: high-transparent plexiglass 9. Power supply: AC220V±10% 50Hz 800W 10. Dimensions: (470×490×780)mm (host L×W×H)
Add to cart
Quick view
Color Matching Cabinet -light Box

Color Matching Cabinet-Light Box

, ,
$0.00

Color Matching Cabinet-Light Box

Color Matching Cabinet-Light Box x

Color Matching Cabinet-Light Box

Color Matching Cabinet -light Box A Color Matching Cabinet-Light box (also known as a Light Box) is a standardized visual assessment tool used to evaluate the color consistency of materials like fabric, paint, plastic, paper, and leather under different lighting conditions. Purpose of Color Matching Cabinet-Light Box : To detect color variations and metamerism (color changes under different lights). Ensures accurate color matching across production batches and materials.   How Color Matching Cabinet-Light Box Works: The cabinet is equipped with multiple standardized light sources (e.g., D65, TL84, UV, CWF, A). Samples are placed inside, and their colors are observed under each light to check for consistency.   Common Light Sources of Color Matching Cabinet-Light Box: D65 – Daylight (standard) TL84 – Store lighting (fluorescent) CWF – Cool white fluorescent UV – Ultraviolet (for fluorescent content) A – Incandescent (home light) U30/U35 – Warm white for showroom lighting     Applications of Color Matching Cabinet-Light Box: Textile and garment inspection Paint and coating industry Plastics and packaging Printing and graphic design   Benefits of Color Matching Cabinet-Light Box: Accurate Color Assessment - Ensures color consistency across products by simulating different lighting conditions. Detects Metamerism - Identifies if colors appear differently under various lights, preventing mismatches. Improves Quality Control - Enhances visual inspection processes in textiles, printing, and packaging.   Standardized Viewing Conditions - Provides consistent light sources for reliable and repeatable evaluations. Reduces Rework and Returns - Helps detect color defects early, saving time and production costs. Supports Industry Standards - Meets international color evaluation standards like ASTM D1729, ISO 3664.   Easy to Use of Color Matching Cabinet -Light Box  - Simple controls with clearly labeled light source buttons. Multiple Light Source Options   - Enables testing under conditions matching retail, daylight, home, and UV lighting. Features of Color Matching Cabinet-Light Box: Multiple Standard Light Sources   - Includes D65 (daylight), TL84 (store light), CWF, UV, A (home light), and optional U30/U35. Digital Hour Meter   - Tracks usage time for each light source to schedule timely replacements. Uniform Light Distribution   - Diffused lighting ensures consistent and shadow-free viewing.   Push Button Control Panel- Easy switching between different light sources. No Warm-Up Time - Instant-on lighting allows immediate use. Sturdy Metal Body - Durable and well-coated to reduce light reflection and distortion. Viewing Area Markings - Guides for proper sample placement and comparison. Optional Dimming Function - Adjustable light intensity (in advanced models) for fine-tuned observation.   Standardized Viewing Angles  - Ensures observer views samples under consistent angles for accurate color judgment.   Description of Color Matching Cabinet-Light Box Color Matching TILO 2 Feet 5/6 Option Light Box Cabinet (P60-5/6) TILO 2 Feet 5/6 Option Light Box Cabinet (P60-5/6) is equipped with 5 light sources. The consistency of the light sources in all Tilo Color Assessment Cabinets gives excellent viewing conditions for reliable color critical decisions under consistent lighting. TILO 2 Feet 5 Option Light Box Cabinet (P60-5) can be applied to the industries that need to perform color difference testing as follows: as the premiere designer and manufacturer of color matching instrument products for the Graphic arts, Photographic, Textile, Dyeing, Packaging, Printing, Leather, Inks, Knitwear, Plastic, Automotive and Ceramics industries. TILO 2 Feet 5 Option Light Box Cabinet (P60-5) offers an exact and dependable way to survey colors beneath different lighting conditions. This apparatus is planned to offer assistance experts in the material, paint, and plastic businesses to coordinate and assess colors with exactness. This high-quality item in Bangladesh at the best cost. The color Cabinet box permits for an ideal seeing environment for color inspection. Features of TILO 2 Feet 5 Option Light Box Cabinet (P60-5) Multiple Light Sources of Color Matching Cabinet-Light Box The lTILO 2 Feet 5 Option Light Box Cabinet (P60-5) incorporates a assortment of light sources. These sources can reenact common sunshine, tungsten, and other counterfeit lighting conditions. By changing light sources, clients can compare colors in diverse situations, guaranteeing precise results. Adjustable Light Intensity of Color Matching Cabinet-Light Box The color coordinating light box highlights flexible light concentrated. You can control the brightness to coordinate distinctive real-world conditions. It guarantees a more point by point investigation of how colors alter beneath different lighting intensities. Compact and Solid Design This color appraisal cabinet comes in a compact plan, making it simple to put in any workspace. Its strong structure guarantees long-term utilize, indeed in requesting environments. Precise Color Evaluation The light box gives a controlled environment that makes a difference clients assess colors in a steady way. This highlight is particularly valuable in businesses where correct color coordinating is basic, such as in materials or paints. Energy Efficient The color cabinet is outlined to be energy-efficient. It employments Driven lights that devour less control whereas still advertising dependable and precise color assessment. Simple Client Interface The user-friendly interface of the color coordinating cabinet makes it simple for anybody to work. The controls are straightforward, and clients can alter settings effortlessly. Portable Design The color coordinating light box is lightweight, making it simple to move from one area to another. This movability is particularly valuable when you require to take the cabinet to diverse parts of the generation floor or to different client locations. Ideal for Different Industries Whether you work in materials, car, or fabricating, the color appraisal cabinet offers the exactness and unwavering quality required for color coordinating. It ensures consistency over distinctive materials and generation lines. FEATURES Certified by ASTM D1729, ISO3664, DIN, ANSI and BSI. Automatic changeable into another light source by switching. Usage time display, name of lamp, total number of switches for each. Violated time sensor for tracking lamp service or replacement. Large display & individual switch, easy to operate each light source. No warm-up time, just plug and play. The energy-saving device which generates lower heat & high efficiency. The name of the light source can be changed. SPECIFICATION OF TILO 2 FEET 5 OPTION LIGHT_BOX CABINET (P60-5) Name Details Model P60(5) Brand TILO Origin Hong Kong Dimensions (WxDxH) (710 x 405 x 570)mm Standards ASTM D1729, ISO3664, DIN, ANSI and BSI Light source Five light source. Power Source Electric. Voltage 220 ~ 240V Body Material Fiber-reinforce Warranty One year free service LIGHT SOURCE OF TILO 2 FEET 5 OPTION LIGHT_BOX CABINET (P60-5) Light Source Color viewing applications / Uses of Light Color Temp. (K) Power (W) Brand Info Quantity D65 International standard Artificial Daylight / Natural Daylight 6500 18 PHILIPS; TL-D/18-965 2 Pieces TL84 Applied to stores in Europe, Japan and China 4000 18 PHILIPS; TL-D/18-840 2 Pieces F “Sun-setting Light Yellow” incandescent light source 2700 40 PHILIPS 4 Pieces UV ultraviolet light to detect and evaluate optical brighteners or fluorescent pigments Wave length: 365nm 20 PHILIPS 18W BLB 1 Pieces CWF (Cool White Fluorescent) American Standard 4150 18 PHILIPS; TL-D/18-640 2 Pieces      
Add to cart
Quick view
Counting Balance-Weighing Scale
Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

, ,
$0.00

Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

  A Counting Balance-Weighing Scale (or Counting Weighing Scale) is a precision electronic scale designed to weigh items and simultaneously count them based on individual piece weight. It’s commonly used in industries for inventory management, packaging, and quality control.   Purpose of Counting Balance-Weighing Scale: To quickly and accurately count small items like buttons, beads, screws, or pills by weight. Eliminates manual counting, especially for large quantities.   Working Principle of Counting Balance-Weighing Scale: Weigh a sample quantity of items to determine the average weight of one piece. Place a bulk quantity on the scale. The scale divides the total weight by the unit weight to calculate the total item count.     Applications of Counting Balance-Weighing Scale: Textile accessories (buttons, rivets) Hardware (nuts, bolts, washers) Electronics (resistors, chips) Pharmaceuticals (tablets, capsules) Benefits of Counting Balance-Weighing Scale:   Fast and Accurate Counting - Saves time by quickly counting large quantities of small items. Reduces Human Error- Eliminates mistakes common in manual counting. Improves Productivity - Speeds up packing, inventory, and quality control processes. Versatile Use - Suitable for various industries: textiles, hardware, pharmaceuticals, electronics.   Cost-Efficient- Reduces labor costs and improves operational efficiency. Compact and Portable - Easy to move and use in different workstations. Dual Functionality - Can be used for both counting and standard weighing. Memory and Tare Functions - Stores unit weights and allows container weight deduction.   Features of Counting Balance-Weighing Scale: High Precision Sensors- Ensures accurate weight and count, even for tiny components. Digital Display- Separate displays for total weight, unit weight, and piece count. Tare Function - Allows deduction of container weight for net measurements. Memory Function - Stores frequently used unit weights for fast recall.   Multiple Units Support- Measures in grams, kilograms, pounds, etc. Sample Size Selection- Users can set sample sizes (e.g., 10, 20, 50 pcs) to calculate piece weight. Overload Protection- Prevents damage from excessive weight. Auto Calibration - Maintains long-term accuracy with internal or external calibration options. Sturdy Platform- Stainless steel pan with anti-slip design for stable weighing. Battery and AC Operation- Can run on rechargeable batteries or power adapter.   How to Use Counting Balance-Weighing Scale: Turn On the Scale - Power it on and wait for the display to stabilize at zero. Tare the Container - Place an empty container on the pan and press the "TARE" button to zero out its weight. Set Sample Size - Place a known quantity (e.g., 10 or 20 pcs) of identical items on the scale. - Enter the sample quantity using the keypad. Confirm Unit Weight - The scale calculates and stores the average unit weight automatically. Add Bulk Items - Add the rest of the items into the container. - The display will show the total count based on the stored unit weight. Record Results   - Note down the total piece count and remove the items. Turn Off After Use - Power off the scale to save battery or electricity.     Counting Balance /Weighing Scale Model : DS610C Brand : DIGISCALE Origin : Germany Capacity : 3 kg Division : 0.1g Min Weight : 0.5g Grade : Class 3 Platter : 280 × 215mm Battery : Rechargeable Battery with AC Adaptor Display : Double Large LCD Display Warranty : One Year Service Warranty SPECIFICATION Build With 5 Measuring Units: kg, g, lb, oz, PCS Count Platter : 280 × 215mm Quality : Heavy Duty Premium Quality Product Net / Gross Weight : 3080g / 3130g Battery : Rechargeable Battery with AC Adaptor Battery Capacity: 6V 4.5Ah / 20 HR Adaptor Power Input : AC 220V-240V / 50Hz Adaptor Power Output : 10V DC/ 500mA Display : Double Large LCD Display Color : White-Gray Keyboard : 20 Members Key Operating Temperature : 0-40°C (32-104°F) FEATURES Auto Zero Tracking Automatic Overload Display Grade Class 3 Auto Backlight Double LCD Display Low Battery Indication Rechargeable Battery with Adaptor Save Electricity Advantage Piece Counting Functionality: The DS603C Counting Weighing Scale is prepared with an precise piece checking highlight, perfect for stock administration, generation lines, and quality control assignments. This guarantees you can tally things like screws, jolts, or other little components efficiently. High-Precision Digital Scale Display: The advanced scale show gives clear and precise readings, making it simple to screen weight and amount. Its shinning and natural interface guarantees ease of use in diverse lighting conditions. Digital Scale Calibration: To keep up exactness, the DS610C weighing scale calibration prepare is direct, guaranteeing the scale remains dependable over time. Normal weight scale calibration ensures reliable execution, indeed with overwhelming use. Durable and Reliable Build: The DS610C advanced weight scale is created with strong materials to withstand visit utilize in requesting situations, such as stockrooms and fabricating facilities. Versatility: As a weighing and tallying scale, it combines the benefits of weight estimation and piece tallying in one gadget. This makes it appropriate for a wide extend of applications, from retail to mechanical uses. Categories: Digital Scale and Balance, Piece Counting Scale, Table Top Scale
Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

 
Add to cart
Quick view
Digital Elmendorf Tearing Tester

Digital Elmendorf tearing tester

,
$0.00
Digital Elmendorf Tearing Tester
Digital Elmendorf Tearing Tester

Digital Elmendorf Tearing Tester

  Digital Elmendorf Tearing Tester is a precision instrument used to measure the tear strength of materials like woven fabrics, paper, plastic films, and nonwovens. It determines how much force is required to continue tearing a pre-slit sample. Key Functions of Digital Elmendorf Tearing Tester: - Measures propagation tear resistance, not initial tear. - Uses a pendulum to apply force; the energy lost during tearing is calculated to determine tear strength. - Equipped with a digital display for direct reading of results in grams or millinewtons. Core Components: - Pendulum Arm: Applies tearing force. - Clamps: Secure the sample before and after the tear. - Cutting Blade: Creates a precise slit at the start of the test. - Digital Display Unit: Shows the tearing force result clearly and instantly. - Counterweights: Optional weights for increasing test range (for stronger materials).   Applications of Digital Elmendorf Tearing Tester: - Testing tear resistance of: - Textile fabrics (especially woven) - Paper and cardboard - Plastic films - Nonwovens - Packaging materials Benefits of Digital Elmendorf Tearing Tester:
  1. Accurate Tear Strength Measurement - Provides precise data on tear resistance, critical for quality control and product performance.
  2. Digital Readout - Easy-to-read display gives instant, reliable results without manual calculations.
  3. High Reproducibility - Ensures consistent test outcomes due to controlled tearing angle and speed.
 
  1. Fast Testing Process - Simple loading and quick test cycle increase lab efficiency.
  2. Suitable for Various Materials - Tests a wide range of flexible materials like textiles, paper, plastic, and packaging.
  3. Customizable Range - Use of optional weights extends the test range for low to high tear strength materials.
  4. Low Sample Waste - Requires small fabric or material samples, reducing waste during testing.
  5. Standards Compliance - Meets international testing standards (e.g., ASTM D1424, ISO 13937) for credibility and uniformity.
Features of Digital Elmendorf Tearing Tester: Digital Display - Provides accurate and direct reading of tear strength in grams, mN, or cN. Pendulum Mechanism - Uses a swinging pendulum to simulate tear propagation with consistent force. Adjustable Test Range - Includes interchangeable pendulum weights to test various material strengths.
  1. Precision Sample Clamp - Securely holds samples in place to ensure accurate tear initiation.
  2. Pre-Cutting Blade - Integrated knife creates a precise initial slit in the sample before tearing.
  3. User-Friendly Interface - Simple buttons and screen navigation for ease of operation.
  4. Standard Test Compliance - Compatible with ASTM D1424, ISO 1974, ISO 13937, and other tear strength standards.
  1. Sturdy Construction - Made with durable materials for long-lasting performance and stable operation.
  2. Compact Design - Space-efficient footprint ideal for laboratory environments.
  3. Data Output Options- Some models offer USB or printer connectivity for result documentation.
How to Use a Digital Elmendorf Tearing Tester:
  1. Prepare the Sample - Cut the material (fabric, paper, film, etc.) to standard size (typically 100 × 63 mm for textiles) and slit it with the pre-cutter as required.
  2. Select Pendulum Weight - Choose the appropriate pendulum or add counterweights based on expected tear strength.
  1. Calibrate the Machine - Set the pendulum to its starting position and zero the display.
  2. Clamp the Sample - Fix one half of the sample in the stationary clamp and the other in the moving clamp.
  3. Cut the Initial Slit - Use the integrated blade to make a precise cut at the marked slit area (usually 20 mm).
  1. Release the Pendulum - Trigger the pendulum to swing and tear the sample through the pre-slit.
  2. Read the Result - The digital display will show the tearing force automatically (in g, mN, or cN).
  3. Record or Export Data - Save or print the result if your model supports USB or printer connection.
  4. Reset for Next Test - Reposition the pendulum and prepare a new sample for the next cycle.
Safety Tip: - Always ensure your hands are clear before releasing the pendulum.   Digital Elmendorf tearing tester Scope of application It is used for the determination of the tear resistance of various woven fabrics (Elmendorf method), and it can also be used for the determination of the tear resistance of thick paper, plastic sheeting, electrical tape, etc. Related standards GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734 etc. Instrument characteristics 1. Maximum 300N test range 2. Microcomputer control, digital decoding, support online communication 3. Color touch screen control, Chinese and English menu operation interface 4. Pneumatic clamping, automatic cutting 5. A variety of measurement units (cN, gf) selection 6. Fully automatic operation with safe operation protection. 7. Automatically increase potential energy [Technical parameter]: 1. Test range: first gear: (0～16)N second gear: (0～32)N third gear: (0～ 64)N fourth gear: (0～128)N fifth gear: (0～300)N 2. Test accuracy: ≤±0.2%F·S 3. Tearing length: 43mm (non-standard 30-60mm can be set) 4. Automatic incision length: (20±0.2)mm 5. Sample size: (100×63)mm 6. Specimen clamping: pneumatic way 7. Sample test: Up to 10 sets per group on the device side, and 30 sets of data can be selected to be saved 8. Power supply: AC220V±10% 50Hz 100W 9. Dimensions: (650×660×680)mm 10. Weight: 50kg [Sample of control interface]:(English version is also available.)
Add to cart
Quick view
Digital Temperature Humidity Meter

Digital Temperature Humidity Meter

,
$0.00
Digital Temperature Humidity Meter

Digital Temperature Humidity Meter

  A Digital Temperature Humidity Meter, also known as a digital hygrometer, is an electronic device used to measure and display the relative humidity (RH) of the air, often along with temperature. It's commonly used in laboratories, industrial settings, storage areas, and homes to monitor moisture levels.   Key Features of Digital Temperature Humidity Meter: - Digital Display: Shows humidity (in % RH) and often temperature (in °C/°F). - Sensor-Based Measurement: Uses capacitive or resistive sensors for accurate readings. - Compact & Portable: Available in handheld or wall-mountable forms. - Data Logging (in some models): Records humidity levels over time for analysis. - Min/Max Readings: Displays historical high and low humidity values.   Common Applications of Digital Temperature Humidity Meter: - Laboratories: Maintaining stable humidity for experiments or sample storage. - Warehouses: Monitoring conditions for sensitive goods (e.g., electronics, paper, pharmaceuticals). - HVAC Systems: Ensuring proper climate control. - Homes: Preventing mold growth or overly dry conditions.   Benefits of Digital Temperature Humidity Meter: - Accurate and quick readings - Easy to use and read - Helps in maintaining comfort, safety, and product integrity Would you like recommendations for models or guidance on calibration? Benefits of Digital Humidity meter Here are the key benefits of using a Digital Humidity Meter:   ✅ 1. Accurate Humidity Monitoring - Provides precise relative humidity (%RH) readings, essential for sensitive environments. ✅ 2. Fast and Real-Time Results - Displays immediate data, allowing for quick adjustments to environmental conditions. ✅ 3. Dual Measurement - Many models also measure temperature, offering a more complete picture of ambient conditions.   ✅ 4. Easy to Use - Simple digital interface with clear display, suitable for both professionals and non-technical users. ✅ 5. Compact and Portable - Lightweight design makes it ideal for field use, indoor monitoring, or mounting on walls. ✅ 6. Prevents Damage - Helps avoid moisture-related issues like mold, corrosion, static buildup, and product degradation.   ✅ 7. Supports Quality Control - Essential for labs, warehouses, and manufacturing environments to maintain product integrity. ✅ 8. Data Logging (Optional) How to use Digital Humidity meter Here are the key features of a Digital Humidity Meter: 1. Digital Display - Shows real-time humidity (%) and often temperature (°C/°F). - Some include backlit screens for easy viewing.   2. High Accuracy Sensors - Uses capacitive or resistive sensors for accurate and stable humidity readings. 3. Min/Max & Hold Functions - Displays minimum, maximum, and current readings. - "Hold" function freezes the current reading for review.   4. Data Logging (in advanced models) - Records humidity data over time for monitoring trends. 5. Portable or Wall-Mountable - Available as handheld, desktop, or wall-mounted units for different environments.   6. Battery or USB Powered - Operates on standard batteries or via USB power for flexibility. 7. Optional External Probes - Some models support external humidity/temperature sensors for remote monitoring. 8. Calibration Option - Allows manual or automatic calibration to maintain accuracy.   Here’s a quick step-by-step guide on how to use a Digital Temperature Humidity Meter: ✅ 1. Power On the Device - Insert batteries (if portable) or plug it in (if wall-mounted). - Press the power button to turn it on. ✅ 2. Place It Properly - Set the meter in an open, well-ventilated area. - Avoid placing near windows, vents, or direct heat sources for accurate readings.   ✅ 3. Wait for Stabilization - Allow the device a few seconds to stabilize and show accurate humidity and temperature readings. ✅ 4. Read the Display - Humidity will be shown as % RH (Relative Humidity). - Most models also display temperature in °C or °F.   ✅ 5. Use Additional Features (if available) - Press buttons to view Min/Max, Data Log, or switch units. - Some advanced models may have Bluetooth or USB for data transfer. ✅ 6. Maintain the Device - Clean sensor area gently if dusty. - Calibrate periodically if required (check manual).  
Add to cart
Quick view
New
Fabric air permeability tester

Fabric air permeability tester

,
$0.00
Fabric Air Permeability Tester
Fabric air permeability tester

Fabric air permeability tester

  Fabric Air Permeability Tester is a lab instrument used to measure how easily air passes through a fabric. It quantifies the air permeability, which is crucial for evaluating breathability, comfort, and functional performance in textiles. Purpose Fabric Air Permeability Tester: It determines the rate of airflow through a fabric sample under a set air pressure, typically reported in units like cm³/cm²/s or L/m²/s. Working Principle: The tester creates a pressure difference across the fabric sample and measures the volume of air flowing through it. Higher air permeability means the fabric is more breathable. Main Components of Fabric Air Permeability Tester: - Test Head / Clamp: Holds the fabric securely without leakage. - Pressure Regulator: Maintains a constant air pressure during testing. - Flow Meter or Digital Sensor: Measures the actual airflow rate through the fabric. - Display Unit: Shows readings of air permeability instantly.   Applications of Fabric Air Permeability Tester: - Performance textiles (sportswear, PPE) - Technical fabrics (filters, tents, airbags) - Medical textiles (masks, gowns) - Nonwovens and industrial materials   Benefits of Fabric Air Permeability Tester:
  1. Accurate Breathability Measurement - Precisely measures how breathable a fabric is, essential for comfort and performance.
  2. Supports Quality Control - Ensures consistent air permeability in fabric batches, critical for products like PPE, sportswear, and filters.
 
  1. Enhances Product Design - Helps in selecting or engineering fabrics with the right airflow properties for specific uses.
  2. Standard Compliance - Conforms to international testing standards (e.g., ASTM D737, ISO 9237), ensuring global credibility.
  3. Quick and Reliable Testing - Provides rapid results, increasing lab efficiency and production decision-making speed.
 
  1. Wide Material Compatibility - Suitable for woven, nonwoven, knitted fabrics, and even paper or coated materials.
  2. Improves Functional Performance - Helps optimize products for ventilation, moisture control, and thermal comfort.
  3. Reduces Product Failure - Identifies underperforming fabrics early, minimizing risks in high-performance applications.
Features of Fabric Air Permeability Tester:
  1. Digital Display - Shows air permeability readings clearly in units like L/m²/s or cm³/cm²/s.
  2. Precise Test Head/Clamp - Provides an airtight seal to prevent air leakage and ensure accurate results.
  3. Adjustable Pressure Settings - Allows testing under various pressure drops (e.g., 10–2500 Pa), depending on fabric type.
 
  1. Automatic Airflow Measurement - Built-in sensors or flow meters capture airflow rate automatically for quick analysis.
  2. Multiple Test Area Sizes - Interchangeable test plates to match different sample sizes and standard requirements.
  3. Data Logging and Export - Some models include USB or software connectivity for storing and exporting test results.
 
  1. Standard Compliance - Conforms to ASTM D737, ISO 9237, BS 5636, DIN 53887, etc.
  2. Robust Construction - Built with corrosion-resistant materials and durable components for long-term lab use.
  3. Low Maintenance - Simple cleaning and calibration process for reliable performance.
  4. Compact and User-Friendly Design - Ideal for lab benches and easy operation with minimal training.
How to Use Fabric Air Permeability Tester:
  1. Prepare the Sample - Cut the fabric sample to the required size (usually circular, e.g., 20 cm²).
  2. Mount the Sample - Place the fabric securely in the test clamp or holder, ensuring no wrinkles or gaps.
  3. Set Test Parameters - Adjust the air pressure drop according to the fabric type or standard (e.g., 100 Pa).
 
  1. Start the Test - Turn on the air supply and start the airflow through the fabric.
  2. Read the Measurement - The digital display will show the air permeability value in the selected units.
  3. Record the Results - Note the readings or export data if the device supports it.
  4. Repeat if needed - Test multiple samples or areas for accuracy and average the results.
  5. Clean and Maintain - After testing, clean the clamp and ensure the device is calibrated regularly.
  Tip: Ensure the test environment maintains standard temperature and humidity for consistent results.   Fabric Air Permeability Tester Appliance Range It is used to TEST the air permeability of various textile fabrics, including industrial fabrics, nonwoven fabrics and other textile products and other breathable materials. Related Standards GB / T 5453, GB / T 13764, ISO 9237, ISO 5636, ASTM D737, etc. Instrument characteristics 1. Automatic sample clamping, automatic nozzle replacement, and quick test. 2. Microcomputer processing, the test results are displayed directly, without manual table calculation; 3. Built-in continuous test mode, the test unit can be switched as needed. 4. Chinese LCD menu operation, configure computer interface. Technical parameter 1. Range of sample pressure difference: 1 ～ 4000Pa 2. Measurable air permeability: 1 ～ 40,000mm / s 3. Measurement error: ≤ ± 2% 4. Measurable fabric thickness: ≤8mm 5. Test area: 5cm2; 20cm2; 50cm2; 100cm2 Ф50mm (≈19.6cm2) Ф70mm (≈38.5cm2) 6. Nozzles: 11 in total (automatic replacement of digital setting) CODE 00 01 02 03 04 05 06 07 08 09 10 DIAφ（mm） 0.8 1.2 2 3 4 6 8 10 12 16 20 7.Data Capacity:≤200 times tests 8.Power Supply：AC220V 50Hz 2KW 9.Weight：80Kg 10.Shape：1250×700×1250mm
Add to cart
Quick view
Fabric Drape Tester
Fabric Drape Tester

Fabric drape tester

$0.00
Fabric Drape Tester
Fabric Drape Tester

Fabric Drape Tester

  Fabric Drape Tester is a lab device used to measure the drape ability of fabric—how it hangs under its own weight. It assesses how fabric conforms in folds or waves, which affects garment appearance and comfort.   Purpose of Fabric Drape Tester: To evaluate the aesthetic and functional behavior of a fabric when suspended, especially important in apparel and home textiles.   Working Principle: A circular fabric specimen is placed over a smaller disc. The unsupported edges drape downward. A light source casts a shadow of the draped shape onto a recording surface or scanner. The area of the shadow is measured to calculate the drape coefficient.   Main Components of Fabric Drape Tester: - Rotating Support Disc: Holds the fabric. - Light Source: Projects the drape shadow. - Paper or Digital Scanner: Captures the drape outline. - Template: For cutting fabric to standard test size. - Software or Plan meter: Calculates the drape coefficient.   Applications of Fabric Drape Tester: - Fashion and apparel design - Fabric development - Quality control in woven, knitted, or nonwoven fabrics   Benefits of Fabric Drape Tester:
  1. Quantifies Fabric Flow - Measures drape behavior accurately, crucial for garments and furnishings.
  2. Supports Design Decisions - Helps designers select fabrics that match the intended look and movement of a product.
  3. Improves Garment Fit and Comfort - Ensures fabrics behave naturally on the body, enhancing wear ability.
 
  1. Enhances Product Aesthetics - Prevents stiff or limp fabric choices in fashion, interior, or technical textiles.
  2. Standardized Evaluation - Enables comparison across fabrics using drape coefficient, based on standards (e.g., BS 5058).
  3. Supports R&D - Useful in developing new fabrics or finishes to improve drape quality.
 
  1. Non-Destructive Testing - Tests fabric without damaging it, allowing for further analysis.
  2. Boosts Quality Control - Identifies batch inconsistencies or performance issues early in production.
  Features of Fabric Drape Tester:
  1. Rotating Support Disc - Holds the fabric sample over a smaller disc to create natural drape.
  2. Standard Sample Size Support - Designed for circular fabric samples, usually 30 cm in diameter.
  3. Light Projection System - Projects the draped fabric’s shadow onto a screen or recording surface.
 
  1. Drape Coefficient Calculation - Measures the shadow area to compute the drape coefficient (percentage of unsupported area covered by the shadow).
  2. Digital or Manual Options - Available in models with digital image processing or manual plan meter tracing.
  3. Stable Base and Structure - Ensures consistent and vibration-free testing conditions.
 
  1. Sample Templates Provided - For cutting precise, standard-sized fabric specimens.
  2. User-Friendly Interface - Simple controls for rotation and light alignment.
  3. Compact and Lab-Ready Design - Fits easily on lab benches and in testing environments.
  4. Compliance with Testing Standards - Supports BS 5058 and other relevant drape measurement methods.
  How to Use Fabric Drape Tester:
  1. Prepare the Fabric Sample - Cut a circular fabric sample, typically 30 cm in diameter, using the provided template.
  2. Place the Fabric - Center the fabric sample over the smaller support disc (usually 18 cm diameter) on the tester.
  3. Turn on the Light Source - Illuminate the fabric from above so it casts a shadow onto the recording surface or paper below.
 
  1. Capture the Shadow Outline - Trace the shadow manually on paper or capture it digitally, depending on the model.
  2. Measure the Shadow Area - Use a plan meter (manual) or software (digital) to determine the shadow’s area.
  3. Calculate Drape Coefficient (DC) - Use the formula:
DC (%) = (Shadow Area - Support Disc Area) / (Full Fabric Area - Support Disc Area) × 100  
  1. Record the Result - Log the drape coefficient to evaluate how stiff or flexible the fabric is.
  2. Repeat for Accuracy - Test multiple samples and average the results for consistency.
    fabric drape tester Scope of application It is used for testing dynamic and static drape properties (drape coefficient, shape change rate, surface ripple and drape uniformity, etc.) of various fabrics. Related standards GB/T23329 FZ/01045 BS5058 etc. Instrument characteristics 1. CCD imaging, dynamic and static image processing. 2. A variety of charts and data statistics, analysis, storage, output 3. No need to replace background color, can test all kinds of color samples. 4. Work mode:Microcomputer control, CCD imaging, automatic processing of images and data automatically. Technical parameters 1. Communication interface: RS232, USB 2. Image sensor: CCD sensor. 3. Static (dynamic) state draping coefficient: 0 ~ 100% + 2 4. Drapability uniformity: 0 ~ 100% + 2 5. The rate of morphological change is 0 to 100% + 2. 6. Surface waviness error: + 1
Add to cart
Quick view
Fabric Flame Retardant Tester

Fabric flame retardant tester

,
$0.00
Fabric Flame Retardant Tester
Fabric Flame Retardant Tester

Fabric Flame Retardant Tester

  A Fabric Flame Retardant Tester is a specialized laboratory instrument designed to evaluate the flammability characteristics of textiles. It assesses how fabrics react to direct flame exposure, measuring parameters such as ignition time, flame spread rate, after-flame duration, and afterglow time. This testing is crucial for ensuring that textiles meet safety standards for various applications, including apparel, home furnishings, and industrial uses.   Purpose and Applications The primary purpose of a Fabric Flame Retardant Tester is to determine the flame resistance of textile materials. This is essential for:- Apparel Safety: Ensuring garments, especially children's sleepwear and industrial work wear, meet flammability standards. - Home Textiles: Testing curtains, drapes, upholstery, and bedding for fire safety compliance. - Technical Textiles: Evaluating materials used in tents, protective clothing, and automotive interiors.   ⚙️ Key Features Modern Fabric Flame Retardant Testers incorporate several features to ensure accurate and reliable testing:- Adjustable Burner Angles: Allowing tests at various orientations (e.g., 0°, 45°, 90°) to simulate different real-world scenarios. Automated Ignition Systems: Providing consistent flame application and reducing operator variability. - Digital Timing Mechanisms: Accurately recording ignition time, flame spread, after-flame, and afterglow durations.   - Transparent Observation Windows: Enabling safe monitoring of the test without exposure to hazards. - Compliance with International Standards: Meeting protocols such as ASTM D6413, ISO 6941, and EN ISO 15025 for standardized testing procedures.   Testing Standards Fabric Flame Retardant Testers are designed to comply with various international standards, including: - ASTM D6413: Standard Test Method for Flame Resistance of Textiles (Vertical Test). - ISO 6941: Textiles — burning behavior — Measurement of flame spread properties of vertically oriented specimens. - EN ISO 15025: Protective clothing — Protection against heat and flame — Method of test for limited flame spread.   ️ How It Works
  1. Sample Preparation: A fabric specimen is cut to specified dimensions and conditioned as per standard requirements.
  2. Mounting: The sample is mounted vertically or at a specified angle in the testing chamber.
  3. Ignition: A controlled flame is applied to the fabric for a predetermined time.
  4. Observation: The tester records ignition time, flame spread, after-flame time, and afterglow time.
  5. Evaluation: Results are compared against standard criteria to determine compliance.
    ✅ Benefits - Safety Assurance: Ensures textiles meet fire safety regulations, reducing risk in end-use applications. - Quality Control: Identifies flammability issues during the manufacturing process. - Regulatory Compliance: Helps manufacturers meet legal requirements for flammability. - Product Development: Assists in developing flame-retardant materials for specialized applications.   For more detailed information on specific models and their features, you can refer to manufacturers like SDL Atlas's Auto Flam Flammability Tester [1], TESTEX's Vertical Flammability Chamber TF312   How to Use a Fabric Flame Retardant Tester (Vertical Flammability Test Method):
  1. Prepare the Sample
- Cut the fabric to standard dimensions (usually 300 × 75 mm). - Condition the fabric for 24 hours at 21°C and 65% relative humidity.  
  1. Mount the Sample
- Place the fabric vertically in the frame inside the test chamber. - Ensure it's held securely with no folds or slack.  
  1. Set Up the Burner Position the burner at the required angle (usually 90° for vertical tests).
- Adjust flame size according to the standard (about 38 mm for ASTM D6413).
  1. Ignite the Flame - Apply the flame to the bottom edge of the fabric for 12 seconds.
 
  1. Observe and Measure - Start timing when flame is applied.
- Measure: - After-flame time (how long it burns after flame removal) - After-glow time (how long it glows after burning stops) - Char length (distance burned vertically)  
  1. Record the Results
- Repeat the test on multiple samples (usually 5) and calculate averages.  
  1. Compare with Standards
- Evaluate whether the results meet the required flame resistance limits.     fabric flame retardant tester IV type (small 450 method) Scope of application It is used for testing the intensity and speed of burning of flammable textile materials after ignition. (specific ignition nozzles and sample holders can be customized to meet multiple criteria). Related standards GB/T14644 ASTM D1230 CFR1610 etc. Technical parameters 1. The spread of time:0 ~ 999.9S resolution 0.1S 2. The temperature inside the box shows:Room temperature -99 degrees C resolution 1 c 3. Igniting time:1S 4. Type of igniter:4 1/2 syringe 5. Sample clip size:Outer frame:204mm * 78mm inner frame:152mm×38mm 6. Distance from the top of the igniter to the sample surface:8mm 7. Studio size and outline size Studio size:370mm×220mm×350mm Outline size:375mm×245mm×478mm 8. Power supply:AC220V 50Hz 20W 9. Weight:18Kg  
Add to cart
Quick view
Fabric Moisture Permeability Tester
Fabric Moisture Permeability Tester

fabric moisture permeability tester

$0.00
Fabric Moisture Permeability Tester
Fabric Moisture Permeability Tester

Fabric Moisture Permeability Tester

  A Fabric Moisture Permeability Tester, also known as a Water Vapor Permeability Tester, is a laboratory instrument designed to measure the rate at which water vapor passes through textile materials. This measurement is crucial for assessing the breathability and comfort of fabrics, especially those used in active wear, outdoor gear, medical textiles, and protective clothing.   Purpose of Fabric Moisture Permeability Tester The primary function of this tester is to evaluate a fabric's ability to allow moisture vapor to pass through it, which directly impacts the wearer's comfort by facilitating sweat evaporation and thermal regulation. High moisture permeability indicates better breathability, making the fabric suitable for applications where moisture management is essential.   Working Principle of Fabric Moisture Permeability Tester The tester operates by placing a fabric specimen over a container filled with water. Under controlled temperature and humidity conditions, water vapor passes through the fabric over a specified period. The amount of water vapor transmitted is determined by measuring the weight loss of the container, allowing for the calculation of the Water Vapor Transmission Rate (WVTR).   Common Testing Methods
  1. Upright Cup Method: The fabric covers a cup containing water, and the assembly is placed upright in a controlled environment. After a set duration, the weight loss is measured to determine the WVTR.
  2. Inverted Cup Method: The fabric is sealed over a cup, which is then inverted and exposed to a controlled environment. The amount of water vapor absorbed by the fabric is measured over time.
 
  1. Sweating Hot Plate Test: Simulates human perspiration by measuring the energy required to maintain a constant temperature on a heated plate covered with the fabric, providing insights into the fabric's breathability.
  Key Specifications of Fabric Moisture Permeability Tester - Test Cups: Typically 6 to 8 cups, each with a diameter of approximately 83 mm and a depth of 18.5 mm.- Turntable Speed: Approximately 2 revolutions per minute (RPM) to ensure uniform exposure. - Environmental Conditions: Tests are conducted under controlled temperature (e.g., 23 ± 2°C) and humidity (e.g., 50 ± 5% RH) settings. - Standards Compliance: Conforms to international standards such as ASTM E96, ISO 15496, BS 7209, and JIS L1099.     ✅ Benefits of Fabric Moisture Permeability Tester - Enhanced Product Development: Provides critical data for designing breathable and comfortable textiles- Quality Assurance: Ensures consistency in fabric performance across different production batches- Regulatory Compliance: Helps manufacturers meet industry standards and certifications.   - Consumer Satisfaction: Contributes to the development of garments that offer better moisture management, leading to increased wearer comfort.   Applications of Fabric Moisture Permeability Tester - Active wear and Sportswear: Assessing fabrics for athletic performance and comfort. - Outdoor and Protective Clothing: Ensuring materials provide adequate breathability while offering protection. Medical Textiles: Evaluating materials used in healthcare settings for moisture management. - Technical and Industrial Textiles: Testing specialized fabrics used in various industrial applications.   Features of fabric moisture permeability tester
  1. Multi-Cup Design - Typically includes 6 or more test cups for simultaneous testing of multiple samples.
  2. Rotating Turntable - Ensures uniform air exposure and consistent vapor transmission across all samples.
  3. Precision Weighing System- Accurate measurement of weight loss to calculate water vapor transmission rate (WVTR).
 
  1. Temperature & Humidity Control - Maintains stable environmental conditions (e.g., 23°C, 50% RH) for reliable results.
  2. Digital Display or Software Interface - Displays real-time data and test status; advanced models offer data logging and export.
  3. Compliance with Standards - Supports ASTM E96, ISO 15496, BS 7209, JIS L1099 testing methods.
 
  1. Sealed Test Chambers- Prevents external air interference, improving accuracy.
  2. Corrosion-Resistant Construction - Durable materials suitable for long-term use in lab environments.
  3. Easy Sample Mounting - Quick and secure fabric placement on test cups with sealing rings.
  4. Low Maintenance Design- Simplified components for easy cleaning and upkeep.
  How to Use Fabric Moisture Permeability Tester (Cup Method):  
  1. Prepare the Test Solution - Fill each test cup with a set amount of water (e.g., 50 ml), or a desiccant if using inverted method.
  2. Mount the Fabric - Cut the fabric into circular pieces matching the cup size.
- Securely seal each fabric over the cup opening with a gasket and ring to prevent leakage.
  1. Weigh the Cups - Record the initial weight of each cup with the fabric mounted.
 
  1. Place on Turntable - Position all cups on the rotating tray inside the controlled chamber.
  2. Set Conditions - Close the chamber and maintain temperature (e.g., 23°C) and relative humidity (e.g., 50%) as per test standard.
  3. Start the Test - Begin rotation (usually ~2 RPM) and let it run for the specified time (often 24 hours).
  4. Weigh the Cups Again- After the test duration, reweigh the cups to determine weight loss due to moisture vapor passing through the fabric.
 
  1. Calculate WVTR - Use the formula: WVTR = (Weight Loss in grams × 24) / (Test Area in m² × Time in hours) Expressed in g/m²/24h.
  2. Clean and Store - Clean cups and components for future use.
    fabric moisture permeability tester Scope of application It is used to determine the moisture permeability of various fabrics (including moisture permeable coated fabrics) and nonwovens such as batting cotton and space cotton. [Related standards] GB/T12704 ASTM E90 JIS L1099A BS 7209 JIS L1099B (custom) etc.   Instrument characteristics 1. Integrated structure of baking oven and constant temperature and humidity box. 2. Microcomputer control, color touch screen Chinese menu operation. 3. Circulating air velocity 0.2-3m/s digital setting. 4. Imported high-precision temperature and humidity sensor, imported motor drive, ceramic heating tube heating.   Technical parameters 1.Work mode: Microcomputer control, color touch screen Chinese menu operation, test environment monitoring. 2. Sample box control temperature:15 ~ 40 C, accuracy 0.1 + C, resolution 0.01 C 3. Heat dissipation mode:Air cooling 4. Sample box control humidity:30 ~ 95%, precision + 2%, resolution 0.01% 5. Test chamber humidification:≥300ml/h 6. Accompany oven control temperature: Room temperature to 200 c 7. Test time:1min～999h59min 8. The rate of circulating steam flow:0. 2-3m/s digital setting resolution 0.01m/s 9. Moisture permeability area:2827㎜2（∮60㎜GB） Optional 3848, 2 (70 70 ASTM) 10. The number of moisture permeable cups.6 (GB) can be replaced by 6 (US standard). 11. Internal dimensions of drying oven:490×400×215mm 12. Power supply:Ac220V 50Hz 6kw 13. Size:930×820×1700mm 14. Weight:350kg
Add to cart
Quick view
Fabric Stiffness Tester
Fabric Stiffness Tester

Fabric Stiffness Tester

$0.00

Fabric Stiffness Tester

Fabric Stiffness Tester

Fabric Stiffness Tester

  Fabric Stiffness Tester is a lab instrument used to measure the stiffness or flexural rigidity of fabric materials. It evaluates how resistant a fabric is to bending, which influences its drape, comfort, and handling characteristics. Purpose of Fabric Stiffness Tester: To determine the stiffness of textiles by measuring the bending length and calculating flexural rigidity, often using methods like the Cantilever Test (as per ASTM D1388 or ISO 9073-7).   Working Principle of Fabric Stiffness Tester: A fabric strip is slid over a horizontal platform until its free end bends under its own weight to a specific angle (usually 41.5°). The length at which this occurs is used to calculate bending length and stiffness.   Main Components of Fabric Stiffness Tester: - Test Platform: Flat surface for sample movement. - Graduated Scale: Measures the overhanging length of fabric. - Angle Indicator: Guides the measurement based on standard deflection angle. - Fabric Clamp or Guide: Helps place and move the sample smoothly.   Applications of Fabric Stiffness Tester: - Apparel fabrics (e.g., for comfort and drape analysis) - Technical textiles (e.g., automotive, medical fabrics) - Paper, nonwovens, and films Benefits of Fabric Stiffness Tester:
  1. Accurate Measurement of Flexibility - Provides reliable data on fabric stiffness, essential for quality control and product development.
  2. Improves Product Comfort - Helps assess how soft or rigid a fabric will feel in clothing or furnishings.
  3. Supports Material Selection - Aids designers and engineers in choosing the right fabric for specific applications based on stiffness.
 
  1. Quality Assurance - Detects fabric inconsistencies or defects that affect handling or drape.
  2. Standards Compliance - Enables testing as per international standards like ASTM D1388 and ISO 9073-7 for global product approval.
  3. Quick and Simple Operation - Delivers fast results with minimal operator training or preparation.
 
  1. Applicable to Multiple Materials - Suitable for woven, nonwoven, knitted fabrics, paper, and films.
  2. Enhances R&D Accuracy - Supports consistent material testing during product innovation and textile finishing.
  Features of Fabric Stiffness Tester:
  1. Graduated Measurement Scale - Precise scale to measure overhang length for accurate stiffness calculation.
  2. Flat Test Platform - Smooth, level surface ensures consistent and reliable fabric movement.
  3. Standard Deflection Angle Guide - Built-in 41.5° angle reference for consistent stiffness testing (per ASTM/ISO).
  4. Manual or Motorized Models - Available in both types for simple or automated operation depending on lab needs.
  5. Compact Design - Space-saving unit ideal for textile labs and quality control rooms.
 
  1. Sample Holder or Clamp - Ensures correct alignment and smooth feeding of fabric strips during testing.
  2. Durable Construction - Made of corrosion-resistant materials like stainless steel or aluminum for long-term use.
  3. Compliance with Standards - Supports methods like ASTM D1388, ISO 9073-7 for stiffness testing of fabrics.
 
  1. Lightweight and Portable - Easy to move and use in various lab settings.
  2. Low Maintenance - Simple mechanical parts require minimal servicing.
  How to Use Fabric Stiffness Tester (Cantilever Method):
  1. Prepare the Sample - Cut the fabric into a rectangular strip (e.g., 25 mm × 200 mm), as per standard.
  2. Place the Sample - Lay the fabric strip flat on the test platform with one end aligned at the zero mark.
  3. Slide the Fabric - Gently push the fabric forward so it slowly overhangs the platform.
 
  1. Watch for Deflection - Stop sliding when the free end of the fabric bends down to the reference angle (typically 41.5°).
  2. Read the Bending Length - Measure the overhang distance from the scale. This is the bending length (C).
  3. Calculate Flexural Rigidity
- Use the formula: G = W × C³ Where: - G = Flexural rigidity (mg·cm) - W = Fabric weight per unit area (mg/cm²) - C = Bending length (cm)  
  1. Repeat for Accuracy - Test both warp and weft directions and average the results for better accuracy.
Tip: Always perform the test in a controlled environment (standard temperature and humidity) for reliable results.         Fabric Stiffness Tester Scope of application It is used to measure the stiffness of cotton, wool, silk, linen, chemical fibers and other woven fabrics, knitted fabrics, general nonwovens, coated fabrics, etc. It is also suitable for measuring the stiffness of paper, leather, film and other flexible materials. Relevant Standards GB/T 18318, ASTM D 1388, IS09073-7, BS EN22313 etc. [Instrument Characteristics] 1. Infrared photoelectric invisible inclined plane detection system replaces the traditional tangible inclined plane, realizes non-contact detection, and overcomes the problem that the measurement accuracy is affected by the sample torsion lifted by the inclined plane. 2. The inclination adjustable mechanism of instrument measurement to meet different test requirements. 3. Stepping motor drive, accurate measurement, smooth operation; 4. The color touch screen display can show the extended length, bending length, bending stiffness of the sample, the warp average, the weft average and the total average of the above values respectively. 5. Printing of Chinese report forms for thermal printers. Technical parameters 1. Test methods: The two method (A method: Weft test, B method: Forward and backward test) 2. Measurement angle:41.5 degree, 43 degree and 45 degree adjustable 3. Extend the length range:5-220 mm (special requirements can be made at the time of ordering) 4. Length resolution:0.01mm 5. Measurement accuracy:±0.1mm 6. Specimen specifications:250×25mm 7. Work platform specifications:250×50mm 8. Specification of sample pressing plate:250×25mm 9. Pushing speed of press plate:3 mm/s; 4 mm/s; 5 mm/s 10. Display output: Touch screen display 11. Print Output: Chinese Report 12. Data Processing Volume: A total of 15 groups, each group less than 20 trials 13. Printer: Thermal printer 14, power supply:AC220V 50Hz 15. Host volume:570mm×360mm×490mm 16. Host weight:20kg
Add to cart
Quick view
Fastness Rotary Friction Tester

Fastness Rotary Friction Tester

$0.00

Fastness Rotary Friction Tester

Fastness Rotary Friction Tester

Fastness Rotary Friction Tester

  A Fastness Rotary Friction Tester, also known as a Rotary Crock meter, is a specialized instrument used to evaluate the color fastness of textiles and materials when subjected to rotational rubbing. This test simulates the wear and friction that fabrics experience during use, helping manufacturers assess the durability of dyes and finishes. Purpose of Fastness Rotary Friction Tester The primary function of the Fastness Rotary Friction Tester is to determine how well a fabric's color withstands rubbing, both in dry and wet conditions. This is crucial for ensuring the longevity and appearance of textiles in real-world applications, such as clothing, upholstery, and footwear.   Working Principle of Fastness Rotary Friction Tester The tester operates by applying a specified pressure to a fabric sample using a standardized rubbing finger covered with a test cloth. The rubbing finger performs a set number of rotational movements (typically 1.125 turns clockwise followed by 1.125 turns counterclockwise) over the fabric surface. After the test, the degree of color transfer to the test cloth and any changes in the fabric's appearance are evaluated against standardized gray scales.   Common Testing Standards - AATCC 116: Colorfastness to Crocking: Rotary Vertical Crock meter Method. ISO 105 X16: Textiles—Tests for color fastness—Part X16: Color fastness to rubbing—small areas. - SATRA TM8: Color fastness to rubbing.   Key Specifications of Fastness Rotary Friction Tester - Rubbing Head Diameter: Typically 16 mm. - Applied Pressure: Approximately 1134 grams (11.1 N). - Rotation: 1.125 turns clockwise followed by 1.125 turns counterclockwise. - Sample Size: Commonly 60 mm × 60 mm. - Test Cloth: Standardized white cotton cloth, either dry or wetted depending on the test condition.   Benefits of Fastness Rotary Friction Tester - Realistic Simulation: Mimics the actual wear and friction fabrics undergo during use. - Versatility: Applicable to a wide range of materials, including textiles, leather, and printed fabrics. - Quality Assurance: Ensures products meet industry standards for color durability. - Standard Compliance: Aligns with international testing standards, facilitating global trade and quality benchmarks.   Applications Fastness Rotary Friction Tester - Textile Industry: Assessing the color durability of garments, upholstery, and other fabric products. - Footwear Manufacturing: Testing the colorfastness of shoe uppers and linings. - Automotive Interiors: Evaluating the wear resistance of seat covers and other interior fabrics. Quality Control Laboratories: Routine testing to ensure product consistency and compliance with standards.   Benefits of Fastness Rotary Friction Tester:
  1. Accurate Colorfastness Evaluation- Provides precise assessment of how well fabric resists color loss and staining from rubbing.
  2. Simulates Real-World Wear - Recreates rotational friction found in actual use (e.g., seat covers, apparel wear points).
  3. Supports Wet & Dry Testing - Can test under both dry and wet conditions for comprehensive results.
 
  1. Standardized Testing - Complies with global standards (AATCC 116, ISO 105 X16), ensuring reliable and comparable results.
  2. Time-Saving & Efficient - Quick to set up and run, allowing for high-throughput testing in labs.
  3. Versatile Use- Suitable for textiles, leather, coated fabrics, and printed surfaces.
 
  1. Improves Quality Control - Identifies potential durability issues early in the production process.
  2. Enhances Product Performance - Helps in developing fabrics with better resistance to rubbing and abrasion.
  Features of Fastness Rotary Friction Tester:
  1. Rotary Rubbing Mechanism - Simulates 1.125 clockwise and 1.125 counterclockwise turns for realistic friction.
  2. Standardized Rubbing Head - Fixed diameter (typically 16 mm) with specified pressure (≈1134 g) for consistent results.
  3. Dry and Wet Testing Capability - Can perform tests using dry or wet rubbing cloths.
 
  1. Sample Holder- Secure and easy-to-use fixture for holding fabric samples in place.
  2. Test Cloth Mounting Arm- Quick attachment for standardized white rubbing cloths.
  3. Simple Operation - Manual or motorized operation depending on model; easy to handle for lab technicians.
  4. Compliance with Standards - Follows AATCC 116, ISO 105 X16, and SATRA TM8 protocols.
  How to Use Fastness Rotary Friction Tester:
  1. Prepare the Sample - Cut a fabric piece (typically 60 × 60 mm) and condition it per standard requirements.
  2. Mount the Fabric - Secure the fabric sample on the sample holder or base plate of the tester.
  3. Attach Rubbing Cloth - Place a standard white test cloth (dry or wetted as required) over the rubbing head.
 
  1. Apply Pressure - Lower the rubbing head onto the fabric. Standard weight is about 1134 g.
  2. Start the Test - Operate the tester: the head performs 1.125 turns clockwise, then 1.125 turns counterclockwise.- Number of cycles (typically 10 or 20) is set based on the test standard.
 
  1. Remove and Inspect - After testing, remove the rubbing cloth and assess any color transfer using a gray scale.
  2. Evaluate Fabric Surface - Check the fabric for visible changes, fading, or wear.
 
  1. Record Results - Grade both staining and fabric change per standard gray scale ratings.
    Fastness rotary friction tester [Scope of application] It is used to change the color fastness of the textile, printing and dyeing, printing and other products after a specific track friction. [Related standards] GB / T29865 AATCC116 ISO105-X16, etc. [Instrument characteristics]: 1.Single-chip control, speed can be set freely 2.Imported motor, linear guide, low noise, suitable for long time work 3. Liquid crystal display, film panel 4. Freely set the number of friction, can count up and down, and automatically stop the alarm when the set value is reached [Technical Parameters]: 1. Friction head diameter: 16mm 25mm 2. Vertical pressure: 11.1N 3. Working mode: 405 ° clockwise and 405 ° counterclockwise 4. Speed range: constant 60 rpm, LCD display, thin mold panel 5. Counting range: 0-99999 times 6. Power supply: AC 220V 50Hz 80W 7. Weight: 20KG 8. Volume: L420mm × W260mm × H430mm
Add to cart
Quick view
Fatigue tester for Elastic fabric

Fatigue tester for Elastic fabric

,
$0.00

Fatigue Tester for Elastic Fabric

Fatigue tester for Elastic fabric

Fatigue tester for Elastic fabric

  A Fatigue Tester for Elastic Fabric is a specialized instrument designed to evaluate the durability and performance of elastic materials, such as elastic bands, tapes, and fabrics, under repeated stretching and relaxation cycles. This testing is crucial for applications where elastic materials are subjected to continuous or repetitive stress, ensuring they maintain their functionality over time.   Purpose Fatigue Tester for Elastic Fabric The primary objective of this tester is to simulate the conditions that elastic fabrics endure during actual use. By repeatedly stretching and relaxing the material, the tester assesses:   - Elastic Recovery: The ability of the material to return to its original length after stretching. - Fatigue Resistance: How well the material withstands repeated cycles without significant degradation. - Durability: The lifespan of the elastic properties under continuous use.   Working Principle of Fatigue Tester for Elastic Fabric The tester operates by clamping a specimen of the elastic fabric and subjecting it to cyclic stretching and relaxation.   Key operational features include: Cycle Count: The number of stretching and relaxation cycles is set according to testing requirements. - Speed Regulation: The rate of stretching can be adjusted to simulate different usage conditions. - Monitoring: The tester records data such as the number of cycles completed and any changes in the fabric's properties.   For instance, the Elastic Band Fatigue Tester ADL-FT01 features a high-speed linear slide, servo motor, and touch screen control software, allowing precise control over stretching parameters   Key Specifications of Fatigue Tester for Elastic Fabric While specifications may vary among different models, common parameters include: - Stretch Percentage: Adjustable from 0% to 100%. - Stretching Speed: Up to 40 cycles per minute. - Sample Length Range: Maximum of 260mm. - Cycle Count Capacity: Up to 9,999,999 cycles. - Control Interface: Typically a 7-inch color touch screen. - Power Supply: AC220V 50Hz/60Hz. These features enable comprehensive testing of elastic materials under various conditions.   Benefits of Fatigue Tester for Elastic Fabric - Quality Assurance: Ensures that elastic materials meet required durability standards. - Product Development: Aids in the design of materials with improved fatigue resistance. Cost Efficiency: Identifies potential material failures early, reducing product returns and warranty claims. - Compliance: Helps manufacturers adhere to industry standards such as GB/T 37635.   Applications of Fatigue Tester for Elastic Fabric Fatigue testers for elastic fabrics are widely used in: - Textile Manufacturing: Testing elastic components in garments, such as waistbands and cuffs. - Medical Textiles: Evaluating the durability of elastic materials used in bandages and supports. - Automotive Industry: Assessing elastic components in car interiors. - Research and Development: Developing new elastic materials with enhanced properties.   Features of Fatigue Tester for Elastic Fabric:
  1. Adjustable Stretch Range - Allows setting stretch levels (e.g., 0–100%) to simulate real-life fabric use.
  2. High-Cycle Capability - Supports up to millions of stretch-relax cycles for long-term fatigue analysis.
  3. Touch Screen Control - 7-inch color display for easy setup, monitoring, and data entry.
  4. Servo Motor Driven - Ensures precise and smooth linear motion during testing.
 
  1. Customizable Speed - Adjustable test speed (e.g., up to 40 cycles per minute) based on test requirements.
  2. Multi-Sample Testing - Some models allow testing multiple specimens simultaneously.
  3. Cycle Counter with Alarm - Built-in counter with programmable stop after preset cycles and auto-alert feature.
 
  1. Durable Construction - Robust metal frame suitable for continuous testing in lab environments.
  2. Standard Compliance - Designed to follow standards like GB/T 37635 for elastic fabric testing.
  How to Use Fatigue Tester for Elastic Fabric:
  1. Prepare the Sample
- Cut the elastic fabric to the specified size (e.g., 260 mm max length). - Mark the gauge length if needed for measurement after testing.
  1. Mount the Sample - Secure both ends of the fabric in the upper and lower clamps.
  2. Set Test Parameters
- Enter the desired stretch percentage (e.g., 50%). - Set the number of cycles and speed (e.g., 30 cycles/min). - Adjust dwell time if required (time fabric stays stretched).  
  1. Start the Test - Press start on the touch screen interface. - The machine will cyclically stretch and release the sample.
  2. Monitor Progress - Observe operation or let it run automatically.
- Machine stops automatically after reaching the set cycles.
  1. Remove and inspect - Take out the fabric and measure elongation, recovery, or visual defects.
  2. Record and Compare Results - Compare with initial measurements or standard performance criteria.
    Fatigue tester for Elastic fabric

    Fatigue tester for Elastic fabric

   
Add to cart
Quick view