Showing 1–12 of 54 results

Show sidebar
Show 9 12 18 24
Analog Thickness Gauge

Analog Thickness Gauge

$0.00

Analog Thickness Gauge

Analog Thickness Gauge

Analog Thickness Gauge

  An Analog Thickness Gauge is a manual instrument used to measure the thickness of materials such as fabric, paper, leather, rubber, and plastic. Unlike digital gauges, it displays readings through a mechanical dial or scale.   Purpose Analog Thickness Gauge: To measure material thickness with reasonable accuracy in lab or production settings. Commonly used in textiles, packaging, leather goods, and quality control labs.   Working Principle : The sample is placed between a flat anvil and a presser foot. When the presser foot contacts the sample under uniform pressure, the thickness is indicated on a dial scale, typically in millimeters.   Types of Analog Thickness Gauge: Dial Thickness Gauge – With a needle and graduated scale. Micrometer-Type Gauge – For finer precision and small samples.   Applications: Textile and fabric inspection Leather and rubber sheet measurement Paper and film thickness control Analog Thickness Gauge Brand : DUNLIN Origin : TAIWAN Measuring Range : 0mm ~ 10mm Accuracy : 0.01mm Deep Throat Range : 120mm Dimension : ( 195 × 130 × 25 ) mm Benefits High Durability – Since analog thickness gauges do not rely on electronic circuits, they are more durable and resistant to environmental factors such as dust and moisture. No Power Requirement – These gauges operate mechanically, eliminating the need for batteries or power sources. Cost-Effective – Analog meters are generally more affordable compared to digital alternatives while still providing precise measurements. Ease of Use – Simple mechanical operation ensures that even non-technical users can easily measure thickness. Reliable Performance – Analog thickness gauges provide consistent and accurate readings without the risk of software malfunctions. Advantages Immediate Readings – No waiting time for booting or calibration, providing instant measurement results. Long-Lasting Accuracy – These devices do not suffer from battery drainage or electronic failures, ensuring accuracy over long periods. Lightweight and Portable – Many analog thickness gauge meters are compact and easy to carry, making them convenient for on-the-go use. Wide Material Compatibility – Suitable for measuring the thickness of metals, textiles, paper, and various industrial materials. Minimal Maintenance – Without electronic parts, maintenance requirements are significantly reduced. Applications Manufacturing Industry – Used in quality control to ensure material thickness meets specified standards. Automotive Sector – Helps measure paint and coating thickness on vehicles to ensure uniform application. Metalworking and Fabrication – Used to measure sheet metal and pipe thickness to maintain precision in production. Plastic and Rubber Industry – Ensures uniform thickness in plastic sheets, films, and rubber products. Paper and Textile Industry – Essential for measuring paper thickness in printing industries and fabric thickness in textile production. Aerospace and Aviation – Used for checking the thickness of coatings and composite materials in aircraft manufacturing.
Analog Thickness Gauge

An Analog Thickness Gauge is a manual instrument used to measure the thickness of materials such as fabric, paper, leather, rubber, and plastic. Unlike digital gauges, it displays readings through a mechanical dial or scale.

 
Add to cart
Quick view
Automatic Bobbin Hydro extractor
Automatic Bobbin Hydro extractor

Automatic Bobbin Hydro extractor

$0.00
Automatic Bobbin Hydro extractor
Automatic Bobbin Hydro extractor

Automatic Bobbin Hydro extractor

  An Automatic Bobbin Hydro extractor is a high-speed centrifugal machine used in textile dyeing units to remove excess water from yarn bobbins after dyeing. It operates by spinning the bobbins at high speed, extracting water via centrifugal force, significantly reducing drying time.   Purpose of Automatic Bobbin Hydro extractor: To dewater dyed yarn bobbins quickly and efficiently before final drying.   Applications of Automatic Bobbin Hydro extractor: Textile dye houses Cone and bobbin dyeing units Pre-drying in yarn processing   Working Principle of Automatic Bobbin Hydro extractor: Dyed bobbins are loaded into perforated baskets. The machine spins rapidly, forcing water outwards and draining it away. Automatic controls manage cycle time, speed, and safety functions.   Benefits of Automatic Bobbin Hydro extractor: Fast Water Removal - Greatly reduces moisture content before drying, saving energy. Gentle on Yarn - Designed to avoid damage or deformation of soft dyed bobbins. Labor-Saving Operation - Fully automatic with programmable cycles for ease of use. Shortens Drying Time - Cuts drying time in hot air or RF dryers significantly.   Improves Production Efficiency - Speeds up workflow in dyeing and finishing processes. Reduces Manual Handling - Often includes hydraulic or pneumatic lifting for easy bobbin loading/unloading.   Features of Automatic Bobbin Hydro extractor: High-Speed Stainless Steel Drum - Rust-resistant and built for stable, high-speed spinning. PLC or Digital Controller - For setting speed, time, and safety interlocks. Soft Start & Stop Function - Protects yarn and machine from sudden movement or shock. Automatic Lid Locking System - Ensures safety during operation.   Efficient Drainage System - Quickly removes expelled water to drain line. Vibration-Free Design - Balanced system reduces noise and mechanical wear.   How to Use Automatic Bobbin Hydro extractor: Prepare Bobbins - Ensure dyed bobbins are properly packed and free of loose ends. Load the Machine - Open the lid and place bobbins evenly inside the perforated drum.     - Avoid overloading to maintain balance during spinning.   Close and Lock Lid - Securely close the lid; the automatic locking system will engage.   Set Parameters- Use the control panel to set spinning speed and time according to yarn type. Start the Cycle - Press start; the machine will gradually accelerate to the preset speed. Monitor Operation - The machine runs, extracting water by centrifugal force.   Cycle Completion - After the set time, the machine slows down and stops automatically. Unload Bobbins - Open the lid once unlocked and carefully remove the hydro-extracted bobbins. Clean the Machine - Remove any residual water or lint from the drum after use.   Maintenance Tips for Automatic Bobbin Hydro extractor: Daily: ☐ Clean the drum and interior to remove lint and water residues ☐ Check lid locking mechanism for smooth operation ☐ Inspect drain pipes for clogging   Weekly: ☐ Lubricate moving parts as per manufacturer instructions ☐ Inspect belt or motor coupling for wear ☐ Test safety interlocks and emergency stop   Monthly: ☐ Check electrical wiring and control panel for damage ☐ Balance drum if vibrations are noticeable ☐ Tighten all bolts and fasteners   Safety Tips: ☐ Always ensure the lid is properly locked before starting ☐ Do not overload the drum to avoid imbalance and damage ☐ Keep hands and loose clothing clear of moving parts ☐ Use emergency stop in case of abnormal noise or vibration ☐ Turn off power before cleaning or maintenance   Automatic Bobbin Hydro extractor Maintenance Checklist Daily: ☐ Clean drum and interior from lint & water ☐ Check lid locking mechanism ☐ Inspect drain pipes for clogging   Weekly: ☐ Lubricate moving parts as per manual ☐ Inspect belt/motor coupling for wear ☐ Test safety interlocks & emergency stop   Monthly: ☐ Check electrical wiring and control panel ☐ Balance drum if vibration occurs ☐ Tighten bolts and fasteners   Safety Checklist ☐ Confirm lid is locked before operation ☐ Avoid overloading drum ☐ Keep hands & loose clothing away from moving parts ☐ Use emergency stop if needed ☐ Power off before cleaning or maintenance   TECHNICAL DATA OF THE MACHINE
  • Computer system: Foshan HuaGao Chinese English computer, equipped with LG PLC.
  • Electromagnetic valve: Ningbo Jiaerling
  • Frequency converter: Use Made in China frequency converters.
  • Pump: self-made high head and large flow centrifugal water pump.
  • Main pump motor: Anhui Wannan Motor.
 
  • Master cylinder liquid level: Use 4-20mA analog signal output.
  • Level of deputy temporary worker: use foam water level gauge. (American Mike)
  • Temperature detection and display: digital temperature display instrument, dual temperature measuring probes.
  • The safety system has a triple cylinder head safety interlock mechanism, and the main cylinder is equipped with a stainless
  • steel safety valve.
  • Heat exchanger: external spacer heating.
  • Feeding system: Quantitative feeding based on the process curve.
 
  • Circulation system: The main pump flows internally and externally, which is automatically controlled by a computer or manually controlled by a relay.
  • Valves: Y valves are used for heating, stainless steel Y valves are used for single inlet and single row, and other Y valves are produced by joint ventures.
  • Temperature control: on-off temperature control, controlled by a computer, with automatic heating, cooling, and insulation functions.
  • Dyeing method: air cushion type.
  • Opening method: manual opening.
  • Surface treatment: polishing inside and outside the cylinder.
  • Cage: Each dyeing machine is equipped with butterfly blades and self-locking locks.
 
  • Body plate: high-quality stainless steel. (S31603)
  • Bath ratio: 1:5-1:6
  • Chemical material system: including heating and water adding functions, including overflow type salt melting device.
  • Overflow cleaning: The cleaning port is installed on the upper part of the cylinder port, and the bottom of the cylinder is filled with water, while the cylinder is drained for easy cleaning.
  • Commutation method: Novel "U" type commutation.
  • Random accessories: Each model comes with one set of mechanical seals, pot mouth rings, and reversing seals for the main and auxiliary pumps.
    Automatic Bobbin Hydro extractor

    Automatic Bobbin Hydro extractor

Add to cart
Quick view
Pneumatic bursting tester

Bursting strength tester

,
$0.00
Bursting strength tester

Pneumatic bursting strength tester

true burst

Pneumatic bursting tester China national patent：ZL201210486480.8 ZL201220628425.3 Pneumatic bursting strength tester China national patent：ZL201210486480.8 ZL201220628425.3 [Scope of application]: It is used to measure the burst strength and burst expansion degree of various fabrics, including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other fabrics made by other processes, under standard conditions or wet conditions. This method is employed to assess the burst strength and degree of burst expansion of various types of fabrics, such as knitted, woven, non-woven, laminated, and others produced through different processes, under both standard and wet conditions. This technique is utilized to evaluate the burst strength and extent of burst expansion in various fabric types, including knitted, woven, non-woven, laminated, and others produced through diverse manufacturing processes, under both standard and wet conditions. Benefits of Bursting strength tester: Fast testing cycle for fast feedback to the production • Auto-start, a photocell detects the presence of a sample and automatically initiates a measurement sequence, thus allowing hands-free operation • Auto-cycling function permits the continuous cycling of the upper pressure foot to facilitate representative and continuous measurements
  • Available with automatic test strip feeder Measurements are simple to make with the Mullen type Bursting Strength Tester. Fast automatic measurements Measurement starts automatically once a test piece has been placed in the measuring gap. The clamping foot descends, and a bursting strength measurement is made.
The sample is then quickly released and is ready for the next measurement at a new position. To maximize the sample measurement rate, the tester uses a minimum of time between the bursts, so that a series of 10 measurements can be done in less than 45 seconds. The actual measuring time depends of course on the type of paper or paper board being tested. Three Different test results can be reported after a single measurement; bursting strength standard, bursting strength compensated, and bursting energy absorption (BEA).Bursting strength tester can be compensated for the stiffness of the diaphragm For low bursting strength levels, the stiffness of the diaphragm can account for a large portion of the bursting strength value. If desired, the device can also measure, calculate, and report effective bursting strength compensated from the effects of the diaphragm. Measurement of Bursting Energy Absorption (BEA) is used to determine the energy absorption capability of a material. Strong, flexible paper has higher energy absorption values, while brittle, stiff paper has lower values. Bursting Strength Tester calculates and reports BEA according to the SCAN P 24 standard Related standards of Bursting strength tester: GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc. [Instrument characteristics]: 1. Microcomputer control, automatic burst test, automatic correction, automatic data processing, and output results in the form of experimental report. 2. Aerodynamics, high cleanliness. 3. Color touch screen interface, Chinese and English menu operation, support online communication.
  1. Bursting pressure can reach up to 1.2MPa 5. The maximum burst and expansion degree can reach 70mm. 6. Strengthen the lighting system on the test surface. 7. The main aerodynamic force helps to clamp the sample system. 8. A variety of test areas are available, and the switching is easy.
  2. A variety of unit conversions between Chinese and English. 10. Reliable anti-pinch safety protection design. [Technical parameter]: 1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized) 2. The minimum graduation value: 0.0001Mpa 3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree pressurization.
4. Test accuracy: ≤±0.2%F·S 5. Thickness of elastic diaphragm: ≤2mm 6. Testing area: cm²） 100 50 10 7.3 Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5 7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min 8. Safety cover: high-transparent plexiglass 9. Power supply: AC220V±10% 50Hz 800W 10. Dimensions: (470×490×780)mm (host L×W×H)
Add to cart
Quick view
Card Winding Machine
Card Winding Machine

Card winding machine

$0.00

Card Winding Machine

Card Winding Machine

Card Winding Machine

  A Card Winding Machine is used in textile processing to wind yarn from hanks, bobbins, or cones onto cards or perforated boards, typically for dyeing or sampling purposes. It ensures uniform yarn distribution and tension, crucial for consistent dye penetration.   Purpose Card Winding Machine: To wind yarn onto flat cards or holders for lab dyeing, color matching, or textile sample display.   Applications Card Winding Machine: Yarn dyeing labs R&D and sample development Display or swatch card preparation Yarn shade catalog creation   Working Principle Card Winding Machine: The yarn is drawn from a source (cone or bobbin) and wound evenly onto a card. The machine controls the winding speed, spacing, and tension to avoid tangles or breaks.   Benefits of Card Winding Machine: Uniform Yarn Placement- Ensures even winding for consistent dyeing and presentation. Ideal for Sampling - Perfect for creating lab dye samples, color cards, and swatches. Time-Saving - Automates a manual process, increasing efficiency.   Low Yarn Waste - Allows controlled use of small yarn amounts for trials. Supports Various Yarn Types - Can handle cotton, polyester, blends, and fancy yarns.   Features of Card Winding Machine: Adjustable Winding Tension - Maintains constant tension to prevent yarn breakage. Speed Control - Variable winding speed for different yarn types and applications. Card Size Compatibility - Supports multiple card sizes and formats. Precision Traverse System- Ensures neat layer formation without overlapping. Compact Design - Table-top or stand-mounted; suitable for labs or sample rooms.   How to Use a Card Winding Machine: Prepare the Yarn Source - Place the yarn cone or bobbin on the yarn holder. - Thread the yarn through the tensioner and guide system. Insert the Card - Mount the empty card or board onto the winding platform/clamp securely.   Set Winding Parameters- Adjust winding speed, tension, and traverse width based on yarn type and card size. Start the Machine - Turn on the power and begin winding; monitor the yarn flow and tension. Monitor the Winding - Ensure yarn is winding evenly and smoothly across the card.   Stop the Machine - Once the desired coverage or length is reached, stop the machine. Remove the Card - Carefully take out the wound card and trim any loose yarn ends. Label or Store - Label for testing or sample purposes as needed.   Maintenance Tips for Card Winding Machine: Daily: ☐ Clean yarn guides and tensioners ☐ Wipe down the machine to remove dust or lint ☐ Check for smooth yarn feeding   Weekly: ☐ Lubricate moving parts if required ☐ Inspect tension device and traverse system for wear ☐ Test speed control and motor function   Monthly: ☐ Tighten all screws, knobs, and clamps ☐ Inspect electrical parts and connections ☐ Clean internal components if accessible   Safety Tips: ☐ Keep fingers away from moving yarn and parts during operation ☐ Do not exceed machine speed limits for delicate yarns ☐ Ensure proper grounding of the machine ☐ Always power off before cleaning or adjusting settings ☐ Wear snug clothing to avoid yarn entanglement  
Product description
Color Card Winding Machine applies to a number of brass wire, yarn,
while according to technological requirements on winding type with quantitative,
bound, for yarn user optional color, contrast and testing purposes.
It is a professional new product designed to give a variety of sample cards.
Specification
Model FH-25
Color card winding machine
Voltage 220V 50HZ one phase
Color White
Dimensions L1100xW600xH800(mm)
Paper color card size According to custom-made Piece Within 25 pieces
Power 15w
Weight 30kgs
We could make special type according to the customers request.
Card Winding Machine

Card Winding Machine

Add to cart
Quick view
COLOR FASTNESS TO WASHING MACHINE
COLOR FASTNESS TO WASHING MACHINE

Color fastness to washing machine

$0.00
COLOR FASTNESS TO WASHING MACHINE
COLOR FASTNESS TO WASHING MACHINE

COLOR FASTNESS TO WASH MACHINE

Color fastness to washing machine refers to a fabric’s resistance to fading or bleeding when subjected to washing processes. This test measures how well the dye or colorant stays on the fabric when exposed to water, detergent, heat, and mechanical action—conditions typically found in household or industrial washing machines. Purpose of Color fastness to washing machine - To evaluate the durability of dyed or printed textiles during laundering.- Essential for determining fabric quality and suitability for end-use (e.g., clothing, upholstery). Test Method Usually based on international standards such as: - ISO 105-C06 - AATCC 61- IS 3361- AATCC 28/61/132/151/190, BS 1006 C01-C05, ISO 105 Part C01-C06/C08/D01, M&S C4/C5/C10A/P3B, FTMS 191-5610, NEXT TM2/3/5, GB/T 5711/3921 Procedure (Simplified)1. Sample Preparation:   - A fabric specimen is stitched with undyed adjacent fabrics (usually cotton or wool).2. Washing:   - Washed in a laboratory washing machine using standard detergent, water, and specific temperature/time settings (e.g., 40°C for 30 minutes).
  1. Drying: - After washing, the sample is dried, typically air-dried or tumble-dried.4. Evaluation: - Color change and staining on adjacent fabrics are assessed using a gray scale (1 to 5 scale; 5 = no change, 1 = severe change).   - Results may also be evaluated visually under standard lighting.
Types of Color fastness to washing machine Tests Domestic laundering (home washing conditions)- Industrial laundering (more intense, commercial cleaning)- Accelerated washing (to simulate multiple washes in less time) Applications- Apparel (especially colored garments)- Home textiles (bed linens, curtains)- Industrial fabrics Would you like to know how to perform this test in a lab setting or check color fastness ratings for specific fabrics? Benefits of Color fastness to washing machine: Ensures Product Quality     - Confirms the durability of dyes and prints during laundering, maintaining the fabric's original appearance.2. Enhances Customer Satisfaction - Reduces complaints and returns caused by fading, bleeding, or color transfer.
  1. Supports Brand Reputation - Reliable color fastness contributes to a premium product image and consistent performance.4. Compliance with Standards - Meets industry requirements (e.g., ISO, AATCC), crucial for export, certifications, and regulatory compliance.
  2. Improves Process Control- Helps identify dyeing or finishing process issues early, leading to better production control.6. Reduces Rework and Waste - Minimizes production losses due to color defects after washing.
  3. Essential for Specific End Uses - Critical for items subject to frequent washing (e.g., uniforms, baby clothes, hospital linens).8. Supports Material Selection - Guides textile manufacturers in choosing appropriate dyes and fabrics for specific applications.
Features of Color Fastness to Washing Machine Test:1. Standardized Testing Methods - Follows international standards like ISO 105-C06, AATCC 61, ensuring consistency and comparability of results.2. Simulated Washing Conditions - Replicates real-world laundering (water, detergent, temperature, mechanical action) in a controlled lab environment.
  1. Assessment of Color Change and Staining- Evaluates both the fabric’s color retention and the staining of adjacent fabrics using grey scales (1 to 5 rating).4. Multi-Fiber Fabric Use - Tests include fabric stitched with adjacent test strips (cotton, wool, etc.) to assess color bleeding onto different fibers.
  2. Multiple Test Options - Includes domestic, accelerated, and industrial washing conditions depending on the end-use of the fabric.6. Temperature and Time Control - Precise control over wash temperature (e.g., 40°C, 60°C) and duration (e.g., 30 mins), simulating specific washing cycles.
  3. Detergent and Additive Use - Uses standardized detergent formulations with/without optical brighteners, and sometimes alkaline or oxidizing agents.8. Reproducible and Quantifiable - Provides repeatable results that can be objectively measured and documented.
  4. Applicability to All Textile Types - Suitable for dyed, printed, or coated fabrics across various fibers (cotton, polyester, blends, etc.).
Model: WF-12 Brand: Dunlin Origin: China Beaker Capacity: 12 Test Scope: Dyed textile product Consumables of Color fastness to washing machine: Specimen Container, Stainless Steel Ball, Stainless Steel Disc, Container Sealing Gasket Specification of Color fastness to washing machine: 1. Test dock: 6 unit 550mL containers + 6 unit 1200mL containers 2. Specimen rack rotation speed: 40±2rpm 3. Capacity of container: 550mL, 1200mL 4. Temperature range: Room temperature to 97ºC 5. Temperature accuracy: ± 0.5ºC
  1. Rate of temperature rise: Maximum speed for 2ºC/min 7. Internal materials: Imported Stainless Steel 316L 8. Control panel: Touch screen
  2. Rack point control function helps to replace containers easily 10. Safety device: Safety door switch, over-temperature protector and dry heating protector 11. Heating media: Distilled water 12. Power supply: AC220V 50Hz 30A
Add to cart
Quick view
Color Matching Cabinet -light Box

Color Matching Cabinet-Light Box

, ,
$0.00

Color Matching Cabinet-Light Box

Color Matching Cabinet-Light Box x

Color Matching Cabinet-Light Box

Color Matching Cabinet -light Box A Color Matching Cabinet-Light box (also known as a Light Box) is a standardized visual assessment tool used to evaluate the color consistency of materials like fabric, paint, plastic, paper, and leather under different lighting conditions. Purpose of Color Matching Cabinet-Light Box : To detect color variations and metamerism (color changes under different lights). Ensures accurate color matching across production batches and materials.   How Color Matching Cabinet-Light Box Works: The cabinet is equipped with multiple standardized light sources (e.g., D65, TL84, UV, CWF, A). Samples are placed inside, and their colors are observed under each light to check for consistency.   Common Light Sources of Color Matching Cabinet-Light Box: D65 – Daylight (standard) TL84 – Store lighting (fluorescent) CWF – Cool white fluorescent UV – Ultraviolet (for fluorescent content) A – Incandescent (home light) U30/U35 – Warm white for showroom lighting     Applications of Color Matching Cabinet-Light Box: Textile and garment inspection Paint and coating industry Plastics and packaging Printing and graphic design   Benefits of Color Matching Cabinet-Light Box: Accurate Color Assessment - Ensures color consistency across products by simulating different lighting conditions. Detects Metamerism - Identifies if colors appear differently under various lights, preventing mismatches. Improves Quality Control - Enhances visual inspection processes in textiles, printing, and packaging.   Standardized Viewing Conditions - Provides consistent light sources for reliable and repeatable evaluations. Reduces Rework and Returns - Helps detect color defects early, saving time and production costs. Supports Industry Standards - Meets international color evaluation standards like ASTM D1729, ISO 3664.   Easy to Use of Color Matching Cabinet -Light Box  - Simple controls with clearly labeled light source buttons. Multiple Light Source Options   - Enables testing under conditions matching retail, daylight, home, and UV lighting. Features of Color Matching Cabinet-Light Box: Multiple Standard Light Sources   - Includes D65 (daylight), TL84 (store light), CWF, UV, A (home light), and optional U30/U35. Digital Hour Meter   - Tracks usage time for each light source to schedule timely replacements. Uniform Light Distribution   - Diffused lighting ensures consistent and shadow-free viewing.   Push Button Control Panel- Easy switching between different light sources. No Warm-Up Time - Instant-on lighting allows immediate use. Sturdy Metal Body - Durable and well-coated to reduce light reflection and distortion. Viewing Area Markings - Guides for proper sample placement and comparison. Optional Dimming Function - Adjustable light intensity (in advanced models) for fine-tuned observation.   Standardized Viewing Angles  - Ensures observer views samples under consistent angles for accurate color judgment.   Description of Color Matching Cabinet-Light Box Color Matching TILO 2 Feet 5/6 Option Light Box Cabinet (P60-5/6) TILO 2 Feet 5/6 Option Light Box Cabinet (P60-5/6) is equipped with 5 light sources. The consistency of the light sources in all Tilo Color Assessment Cabinets gives excellent viewing conditions for reliable color critical decisions under consistent lighting. TILO 2 Feet 5 Option Light Box Cabinet (P60-5) can be applied to the industries that need to perform color difference testing as follows: as the premiere designer and manufacturer of color matching instrument products for the Graphic arts, Photographic, Textile, Dyeing, Packaging, Printing, Leather, Inks, Knitwear, Plastic, Automotive and Ceramics industries. TILO 2 Feet 5 Option Light Box Cabinet (P60-5) offers an exact and dependable way to survey colors beneath different lighting conditions. This apparatus is planned to offer assistance experts in the material, paint, and plastic businesses to coordinate and assess colors with exactness. This high-quality item in Bangladesh at the best cost. The color Cabinet box permits for an ideal seeing environment for color inspection. Features of TILO 2 Feet 5 Option Light Box Cabinet (P60-5) Multiple Light Sources of Color Matching Cabinet-Light Box The lTILO 2 Feet 5 Option Light Box Cabinet (P60-5) incorporates a assortment of light sources. These sources can reenact common sunshine, tungsten, and other counterfeit lighting conditions. By changing light sources, clients can compare colors in diverse situations, guaranteeing precise results. Adjustable Light Intensity of Color Matching Cabinet-Light Box The color coordinating light box highlights flexible light concentrated. You can control the brightness to coordinate distinctive real-world conditions. It guarantees a more point by point investigation of how colors alter beneath different lighting intensities. Compact and Solid Design This color appraisal cabinet comes in a compact plan, making it simple to put in any workspace. Its strong structure guarantees long-term utilize, indeed in requesting environments. Precise Color Evaluation The light box gives a controlled environment that makes a difference clients assess colors in a steady way. This highlight is particularly valuable in businesses where correct color coordinating is basic, such as in materials or paints. Energy Efficient The color cabinet is outlined to be energy-efficient. It employments Driven lights that devour less control whereas still advertising dependable and precise color assessment. Simple Client Interface The user-friendly interface of the color coordinating cabinet makes it simple for anybody to work. The controls are straightforward, and clients can alter settings effortlessly. Portable Design The color coordinating light box is lightweight, making it simple to move from one area to another. This movability is particularly valuable when you require to take the cabinet to diverse parts of the generation floor or to different client locations. Ideal for Different Industries Whether you work in materials, car, or fabricating, the color appraisal cabinet offers the exactness and unwavering quality required for color coordinating. It ensures consistency over distinctive materials and generation lines. FEATURES Certified by ASTM D1729, ISO3664, DIN, ANSI and BSI. Automatic changeable into another light source by switching. Usage time display, name of lamp, total number of switches for each. Violated time sensor for tracking lamp service or replacement. Large display & individual switch, easy to operate each light source. No warm-up time, just plug and play. The energy-saving device which generates lower heat & high efficiency. The name of the light source can be changed. SPECIFICATION OF TILO 2 FEET 5 OPTION LIGHT_BOX CABINET (P60-5) Name Details Model P60(5) Brand TILO Origin Hong Kong Dimensions (WxDxH) (710 x 405 x 570)mm Standards ASTM D1729, ISO3664, DIN, ANSI and BSI Light source Five light source. Power Source Electric. Voltage 220 ~ 240V Body Material Fiber-reinforce Warranty One year free service LIGHT SOURCE OF TILO 2 FEET 5 OPTION LIGHT_BOX CABINET (P60-5) Light Source Color viewing applications / Uses of Light Color Temp. (K) Power (W) Brand Info Quantity D65 International standard Artificial Daylight / Natural Daylight 6500 18 PHILIPS; TL-D/18-965 2 Pieces TL84 Applied to stores in Europe, Japan and China 4000 18 PHILIPS; TL-D/18-840 2 Pieces F “Sun-setting Light Yellow” incandescent light source 2700 40 PHILIPS 4 Pieces UV ultraviolet light to detect and evaluate optical brighteners or fluorescent pigments Wave length: 365nm 20 PHILIPS 18W BLB 1 Pieces CWF (Cool White Fluorescent) American Standard 4150 18 PHILIPS; TL-D/18-640 2 Pieces      
Add to cart
Quick view
Cone Yarn Dyeing Machine
Cone Yarn Dyeing Machine

Cone yarn Dyeing machine

$0.00

Cone Yarn Dyeing Machine

Cone Yarn Dyeing Machine

  A Cone Yarn Dyeing Machine is an industrial machine used for dyeing yarn wound on perforated cones. It allows dye liquor to flow through the yarn packages under pressure and temperature, ensuring deep and uniform color penetration. A Production Cone Yarn Dyeing Machine is a large-capacity, high-efficiency machine designed for dyeing yarns wound on cones in bulk. It's essential in commercial textile operations where consistent shade, penetration, and process repeatability are critical.     Purpose of Cone Yarn Dyeing Machine: To dye large batches of yarn cones efficiently and consistently.   Key Components: Dyeing Vessel:   - A vertical or horizontal pressure vessel made of stainless steel (SS 316/304), designed to withstand high pressure and temperature. Yarn Carrier (Spindles):   - Holds multiple cones arranged on perforated spindles allowing dye to pass through. Circulation Pump:  - Forces dye liquor through yarn in inward and/or outward flow for thorough penetration. Heat Exchanger: - Heats dye bath using steam or thermal fluid, with precise control.   Control System (PLC): - Fully automated for setting temperature profile, flow direction, timing, and rinsing cycles. Liquor Tanks & Valves: - For preparation, dosing, and circulation of dyes, chemicals, and water.   Working Cycle: Loading: Cones are placed on carriers and loaded into the machine. Liquor Preparation: Dye and auxiliaries mixed in a separate tank or directly. Dyeing: Liquor is circulated through cones under set temperature and pressure. Rinsing & Soaping: Post-dyeing cleaning and neutralization cycles. Cooling & Unloading: Bath cooled; cones unloaded for hydro extraction.   Production Capacity: Varies from 5 kg lab models to over 1000 kg per batch in industrial setups.   How to Use Production Cone Yarn Dyeing Machine: Preparation: - Inspect the machine for cleanliness and proper function. - Prepare dye liquor by mixing dyes and auxiliaries according to recipe. Loading Yarn: - Place yarn cones evenly on perforated spindles/carriers. - Load the carriers into the dyeing vessel securely.     Set Parameters: - Input dyeing parameters on the control panel (temperature, time, flow direction, pressure). Start Dyeing Cycle: - Begin liquor circulation and heating. - Monitor temperature and pressure for stability. Flow Control: - Switch between inward and outward liquor flow as programmed to ensure uniform dyeing. Rinsing & Soaping: - After dyeing, run rinse cycles to remove unfixed dye and chemicals.  - Soaping cycle if required for color fixation.   Cooling:  - Lower temperature gradually to avoid thermal shock. Unloading: - After the cycle completes, safely open the vessel.  - Remove dyed cones and transfer for hydro-extraction or drying. Cleaning: - Clean the vessel and filters for the next batch. Tips: Always check for uniform loading to avoid uneven dyeing.   Applications of Cone Yarn Dyeing Machine: Used in yarn dyeing mills for cotton, polyester, viscose, and blended yarns. Ideal for commercial-scale dyeing before weaving or knitting.   Working Principle: Yarn cones are stacked on spindles inside a dyeing vessel. Dye liquor is pumped through the cones (inward or outward flow). Temperature, pressure, and time are controlled digitally for accurate dyeing.   Benefits of Cone Yarn Dyeing Machine: Uniform Dye Penetration - Ensures even color across the entire yarn cone. High Productivity - Capable of dyeing multiple cones simultaneously. Efficient Dye Utilization - Recycles dye liquor to reduce waste and cost. Energy & Water Saving - Optimized cycles lower water, steam, and chemical usage. Consistent Quality - Controlled temperature and pressure ensure repeatable results. Suitable for Various Yarns - Handles cotton, polyester, viscose, acrylic, and blends.   Features of Cone Yarn Dyeing Machine: High-Pressure Dyeing Vessel - Made from stainless steel for durability and corrosion resistance. Inward/Outward Flow System - Alternating flow ensures full yarn coverage. Automatic Controls - PLC or digital panel for temperature, time, and pressure settings. Heat Recovery System (optional) - Saves energy by recycling heat from spent liquor.   Safety Mechanisms - Includes pressure relief valves and auto-locking lids. Multiple Carrier Sizes - Supports various bobbin sizes and production capacities. Follow safety procedures due to high pressure and temperature. Use proper protective equipment when handling chemicals.   Safety Tips for Production Cone Yarn Dyeing Machine: Always wear appropriate PPE (gloves, goggles, apron) when handling dyes and chemicals. Ensure the dyeing vessel lid is securely locked before starting the machine. Do not open the vessel while it is pressurized or hot. Follow emergency shutdown procedures if abnormal noise, leaks, or pressure occur. Keep the workspace clean and free of slip hazards from spilled liquids. Regularly inspect safety valves and pressure gauges for proper function. Train operators on emergency response and chemical handling protocols.   Maintenance Tips: Clean the dyeing vessel and filters after each batch to prevent residue build-up. Regularly check and lubricate moving parts like pumps and valves. Inspect seals and gaskets to avoid leaks under pressure. Calibrate temperature and pressure sensors periodically. Check electrical panels and control systems for damage or loose connections. Schedule preventive maintenance as recommended by the manufacturer.     Production Cone Yarn Dyeing Machine Safety Checklist ☐ Wear PPE (gloves, goggles, apron) during operation ☐ Ensure vessel lid is securely locked before starting ☐ Never open vessel when pressurized or hot ☐ Follow emergency shutdown procedures if issues arise ☐ Keep floor clean and dry around machine ☐ Regularly inspect safety valves and pressure gauges ☐ Train operators on emergency and chemical handling     Maintenance Checklist ☐ Clean vessel and filters after each batch ☐ Lubricate pumps, valves, and moving parts regularly ☐ Inspect seals and gaskets for wear or leaks ☐ Calibrate temperature an   TECHNICAL DATA OF THE MACHINE
  • Computer system: Foshan HuaGao Chinese English computer, equipped with LG PLC.
  • Electromagnetic valve: Ningbo Jiaerling
  • Frequency converter: Use Made in China frequency converters.
  • Pump: self-made high head and large flow centrifugal water pump.
  • Main pump motor: Anhui Wannan Motor.
 
  • Master cylinder liquid level: Use 4-20mA analog signal output.
  • Level of deputy temporary worker: use foam water level gauge. (American Mike)
  • Temperature detection and display: digital temperature display instrument, dual temperature measuring probes.
  • The safety system has a triple cylinder head safety interlock mechanism, and the main cylinder is equipped with a stainless
  • steel safety valve.
  • Heat exchanger: external spacer heating.
 
  • Feeding system: Quantitative feeding based on the process curve.
  • Circulation system: The main pump flows internally and externally, which is automatically controlled by a computer or manually controlled by a relay.
  • Valves: Y valves are used for heating, stainless steel Y valves are used for single inlet and single row, and other Y valves are produced by joint ventures.
  • Temperature control: on-off temperature control, controlled by a computer, with automatic heating, cooling, and insulation functions.
  • Dyeing method: air cushion type.
 
  • Opening method: manual opening.
  • Surface treatment: polishing inside and outside the cylinder.
  • Cage: Each dyeing machine is equipped with butterfly blades and self-locking locks.
  • Body plate: high-quality stainless steel. (S31603)
  • Bath ratio: 1:5-1:6
 
  • Chemical material system: including heating and water adding functions, including overflow type salt melting device.
  • Overflow cleaning: The cleaning port is installed on the upper part of the cylinder port, and the bottom of the cylinder is filled with water, while the cylinder is drained for easy cleaning.
  • Commutation method: Novel "U" type commutation.
  • Random accessories: Each model comes with one set of mechanical seals, pot mouth rings, and reversing seals for the main and auxiliary pumps.
    Cone Yarn Dyeing Machine

    Cone Yarn Dyeing Machine

Add to cart
Quick view
Controller For IR Dyeing Machine
Color Matching Cabinet -light Box

Controller For IR Dyeing Machine

,
$0.00
Controller For IR Dyeing Machine
Controller For IR Dyeing Machine

IR Dyeing machine controller

Controller For IR Dyeing Machine offers exceptional quality .purchasing of our controller provides cost efficiencies, and customization options enabling you to meet your specific requirements comfortably. Collaborate with program A Controller for IR Dyeing Machine is a specialized control system designed to manage and automate the dyeing process in textile manufacturing, particularly using infrared heating technology. These controllers are crucial for achieving consistent dye quality, reducing energy consumption, and optimizing the dyeing process.   Key Features of an Controller For IR Dyeing Machine :
  1. Temperature Control:- Precisely regulates the infrared heaters to maintain uniform temperature across the dye bath. - Supports customizable heating curves (ramp-up, hold, and cool-down phases).
  2. Programmable Logic Control (PLC): - Allows operators to set and automate dyeing programs for different fabrics and dye types. - Supports multiple recipes or programs for different batches.
 
  1. Real-Time Monitoring and Feedback: - Monitors parameters like temperature, fabric rotation, bath circulation, and timing. - Provides real-time data and alarms for deviations.
  2. Touchscreen Interface / HMI (Human Machine Interface): - User-friendly interface for configuring and monitoring processes. - Multi-language support and graphical display of process curves.
 
  1. Data Logging and Traceability: - Records process data for quality control and traceability.
  2. Energy Efficiency Optimization: - Manages IR heater output to reduce energy usage. - Often includes features for auto shut-off or idle mode.
 
  1. Safety Features: - Includes emergency stop, over-temperature protection, and fault detection systems. 8. Connectivity: - Modern controllers may support Ethernet, Modbus, or other industrial communication protocols for integration into factory automation systems.
  Using A Controller For IR Dyeing Machine provides several benefits, especially in textile manufacturing where precision and efficiency are critical. Here are the key advantages:
  1. Improved Dyeing Accuracy and Consistency
- Maintains precise temperature control and timing, ensuring uniform dye uptake across the fabric. - Reduces color variation between batches.  
  1. Enhanced Energy Efficiency- Infrared heating is more energy-efficient than traditional heating methods.- The controller optimizes energy use by adjusting the IR output based on process needs, reducing overall energy consumption.
 
  1. Time Savings- Faster heating and cooling cycles due to infrared technology.- Automated processes reduce manual intervention and cycle times. 4. Better Process Control- Programmable dyeing cycles and precise control over each stage (heating, dyeing, rinsing, cooling).- Real-time monitoring and adjustments improve reliability.
 
  1. Reduced Water and Chemical Usage- More efficient dye penetration and fixation mean less water and fewer chemicals are needed for reprocessing or corrections.6. Lower Operational Costs
- Energy savings, reduced rework, and lower labor input contribute to cost efficiency. - Minimizes fabric damage, reducing material waste.  
  1. Enhanced Safety Built-in alarms, emergency shut-off and automatic fault detection enhance operational safety.8. Data Logging and Traceability- Ability to record and review dyeing process data helps in quality control and troubleshooting.- Facilitates compliance with industry standards and audits.
 
  1. User-Friendly Operation- Modern touchscreen interfaces make it easier for operators to manage and monitor processes.- Multilingual support and visual feedback enhance usability.
 
Add to cart
Quick view
Counting Balance-Weighing Scale
Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

, ,
$0.00

Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

  A Counting Balance-Weighing Scale (or Counting Weighing Scale) is a precision electronic scale designed to weigh items and simultaneously count them based on individual piece weight. It’s commonly used in industries for inventory management, packaging, and quality control.   Purpose of Counting Balance-Weighing Scale: To quickly and accurately count small items like buttons, beads, screws, or pills by weight. Eliminates manual counting, especially for large quantities.   Working Principle of Counting Balance-Weighing Scale: Weigh a sample quantity of items to determine the average weight of one piece. Place a bulk quantity on the scale. The scale divides the total weight by the unit weight to calculate the total item count.     Applications of Counting Balance-Weighing Scale: Textile accessories (buttons, rivets) Hardware (nuts, bolts, washers) Electronics (resistors, chips) Pharmaceuticals (tablets, capsules) Benefits of Counting Balance-Weighing Scale:   Fast and Accurate Counting - Saves time by quickly counting large quantities of small items. Reduces Human Error- Eliminates mistakes common in manual counting. Improves Productivity - Speeds up packing, inventory, and quality control processes. Versatile Use - Suitable for various industries: textiles, hardware, pharmaceuticals, electronics.   Cost-Efficient- Reduces labor costs and improves operational efficiency. Compact and Portable - Easy to move and use in different workstations. Dual Functionality - Can be used for both counting and standard weighing. Memory and Tare Functions - Stores unit weights and allows container weight deduction.   Features of Counting Balance-Weighing Scale: High Precision Sensors- Ensures accurate weight and count, even for tiny components. Digital Display- Separate displays for total weight, unit weight, and piece count. Tare Function - Allows deduction of container weight for net measurements. Memory Function - Stores frequently used unit weights for fast recall.   Multiple Units Support- Measures in grams, kilograms, pounds, etc. Sample Size Selection- Users can set sample sizes (e.g., 10, 20, 50 pcs) to calculate piece weight. Overload Protection- Prevents damage from excessive weight. Auto Calibration - Maintains long-term accuracy with internal or external calibration options. Sturdy Platform- Stainless steel pan with anti-slip design for stable weighing. Battery and AC Operation- Can run on rechargeable batteries or power adapter.   How to Use Counting Balance-Weighing Scale: Turn On the Scale - Power it on and wait for the display to stabilize at zero. Tare the Container - Place an empty container on the pan and press the "TARE" button to zero out its weight. Set Sample Size - Place a known quantity (e.g., 10 or 20 pcs) of identical items on the scale. - Enter the sample quantity using the keypad. Confirm Unit Weight - The scale calculates and stores the average unit weight automatically. Add Bulk Items - Add the rest of the items into the container. - The display will show the total count based on the stored unit weight. Record Results   - Note down the total piece count and remove the items. Turn Off After Use - Power off the scale to save battery or electricity.     Counting Balance /Weighing Scale Model : DS610C Brand : DIGISCALE Origin : Germany Capacity : 3 kg Division : 0.1g Min Weight : 0.5g Grade : Class 3 Platter : 280 × 215mm Battery : Rechargeable Battery with AC Adaptor Display : Double Large LCD Display Warranty : One Year Service Warranty SPECIFICATION Build With 5 Measuring Units: kg, g, lb, oz, PCS Count Platter : 280 × 215mm Quality : Heavy Duty Premium Quality Product Net / Gross Weight : 3080g / 3130g Battery : Rechargeable Battery with AC Adaptor Battery Capacity: 6V 4.5Ah / 20 HR Adaptor Power Input : AC 220V-240V / 50Hz Adaptor Power Output : 10V DC/ 500mA Display : Double Large LCD Display Color : White-Gray Keyboard : 20 Members Key Operating Temperature : 0-40°C (32-104°F) FEATURES Auto Zero Tracking Automatic Overload Display Grade Class 3 Auto Backlight Double LCD Display Low Battery Indication Rechargeable Battery with Adaptor Save Electricity Advantage Piece Counting Functionality: The DS603C Counting Weighing Scale is prepared with an precise piece checking highlight, perfect for stock administration, generation lines, and quality control assignments. This guarantees you can tally things like screws, jolts, or other little components efficiently. High-Precision Digital Scale Display: The advanced scale show gives clear and precise readings, making it simple to screen weight and amount. Its shinning and natural interface guarantees ease of use in diverse lighting conditions. Digital Scale Calibration: To keep up exactness, the DS610C weighing scale calibration prepare is direct, guaranteeing the scale remains dependable over time. Normal weight scale calibration ensures reliable execution, indeed with overwhelming use. Durable and Reliable Build: The DS610C advanced weight scale is created with strong materials to withstand visit utilize in requesting situations, such as stockrooms and fabricating facilities. Versatility: As a weighing and tallying scale, it combines the benefits of weight estimation and piece tallying in one gadget. This makes it appropriate for a wide extend of applications, from retail to mechanical uses. Categories: Digital Scale and Balance, Piece Counting Scale, Table Top Scale
Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

 
Add to cart
Quick view
Digital Bench top PH Meter
Digital Bench top PH Meter

Digital Bench top PH Meter

$0.00

Digital Bench top PH Meter

Digital Bench top PH Meter

Digital Bench top PH Meter

Brand: Hanna Model: HI2002 Country of Manufacture: Romania Origin: USA

Digital Bench top PH Meter

Single parameter of Digital Bench top PH Meter features user-friendly tablet design with bench, portable or wall mount options for ultimate flexibility. Switch from portable to bench in the same procedure or clear the surface for easier working and hang on the wall. Digital Bench top PH Meter Range -2.00 to 16.00pH; pH  Digital smart electrode compatible  Accuracy: ±0.01 pH edge® pH is dedicated to testing pH. Using Hanna's latest innovation in technology and design, edge® can be adapted to suit your working method. Select from hand held, wall mount or bench top - or switch between them all. edge® is happy any which way. Simply plug in the electrode, then play. Measurement is simpler, quicker and more accurate than ever. Results are fast and reliable. Combining high precision technology with the user-friendly dimensions and format of a small digital tablet, edge® is breaking new ground in electrochemistry. This is a must-have meter for your laboratory.
pH Range basic mode: -2.00 to 16.00 pH; standard mode: -2.000 to 16.000 pH
 Resolution basic mode: 0.01 pH; standard mode: 0.001 pH
 Accuracy (@25°C) basic mode: ±0.01 pH; standard mode: ±0.002 pH
 Calibration basic mode: automatic, up to three points calibration, 5 standard buffers available; standard mode: automatic, up to five point calibration, 7 standard buffers available and two custom buffers
Temperature Compensation automatic, -5.0 to 100.0°C (using integral temperature sensor)
Electrode Diagnostics standard mode: probe condition, response time and out of calibration range
mV pH Range ±1000 mV
 Resolution 0.1 mV
 Accuracy (@25°C) ±0.2 mV
ORP Range ±2000 mV
 Resolution 0.1 mV
 Accuracy (@25°C) ±0.2 mV
Temperature Range -20.0 to 120.0°C
 Resolution 0.1°C
 Accuracy ±0.5°C
Additional Specifications:
 Probe HI-11310 digital glass body pH electrode with 3.5mm connector and 1m cable
 Logging up to 1000 (400 for basic mode) records organised in: manual log-on demand (max. 200 logs), manual log-on-stability (max. 200 logs), interval logging (max. 600 samples; 100 lots)
 Connectivity 1 USB port for storage; 1 micro USB port for charging and PC connectivity
 Environment 0 to 50°C; RH max 95% non-condensing
 Power Supply 5 VDC adapter (included)
 Dimensions 2020 x 140 x 12 mm
 Weight 250 g
A Digital Bench Top pH Meter is a laboratory-grade instrument designed to measure the pH (acidity or alkalinity) of liquid samples with high precision. It's commonly used in research labs, industrial applications, environmental testing, and educational institutions. Key Features of a Digital Bench Top pH Meter
  1. High Accuracy and Resolution
- Offers precise pH measurements, often with accuracy up to ±0.01 pH units. - Suitable for applications where exact pH control is critical.  
  1. Digital Display   - Large, clear LCD or LED screen shows pH readings, temperature, and sometimes mV or ion      concentration.   - Some models include a backlit display for better visibility.
 
  1. Electrode System   - Uses a pH-sensitive electrode (usually glass) connected to a reference electrode. Electrodes are often replaceable and require regular calibration and maintenance.
 
  1. Temperature Compensation - Automatic or manual temperature compensation to correct pH readings based on sample temperature.   - Integrated temperature sensors or separate probes are used.
  1. Calibration Functions   - Supports 2-point, 3-point, or multi-point calibration using standard buffer solutions.   - Auto-recognition of calibration buffers in advanced models.
  1. Data Storage and Connectivity   - Internal memory for storing results.   - USB or RS232 ports for data export to PCs or printers; some models support wireless connectivity.
  1. Sturdy Design   - Benchtop models are larger and more stable than portable meters.   - Often come with a durable casing and electrode arm for hands-free operation.
Applications - Water quality testing (e.g., in wastewater treatment, drinking water monitoring) - Chemical and pharmaceutical industries - Food and beverage production - Biological and environmental research - Educational laboratories A Digital Bench Top pH Meter offers numerous benefits, making it a preferred choice in laboratory and industrial environments where accuracy, reliability, and ease of use are essential. Benefits of a Digital Bench Top pH Meter
  1. High Accuracy and Precision
- Provides accurate and consistent pH readings, often with ±0.01 pH resolution. - Ideal for scientific and quality control applications where precise pH monitoring is critical.  
  1. User-Friendly Interface- Digital displays (LCD/LED) make readings easy to see and interpret.- Many models offer intuitive controls and guided calibration, simplifying operation.
 
  1. Advanced Calibration Features- Supports multi-point calibration for improved accuracy across a wide pH range.- Some models automatically recognize buffer solutions, reducing user error.
  1. Temperature Compensation- Automatic temperature compensation (ATC) corrects readings based on sample temperature, ensuring accuracy.
  1. Stable and Durable Design- Benchtop units are more robust and stable than handheld devices, reducing the risk of spills or tipping.- Often include electrode holders or arms for secure, hands-free measurements.
  1. Data Management and Connectivity- Built-in memory for storing measurement data.USB, RS232, or wireless connectivity for exporting data to computers or laboratory information systems (LIS).
  1. Multi-Functionality- Some models also measure ORP (oxidation-reduction potential), ion concentration, or conductivity.- Suitable for a variety of testing needs beyond just pH.
  1. Ideal for Long-Term Use- Designed for prolonged and repeated use in laboratory environments.- Replaceable electrodes and parts extend the meter’s usable life.
  1. Compliance and Documentation- Data logging features support documentation and compliance with regulatory standards in regulated industries (e.g., pharma, food, environmental testing).
 
Add to cart
Quick view
Digital Elmendorf Tearing Tester

Digital Elmendorf tearing tester

,
$0.00
Digital Elmendorf Tearing Tester
Digital Elmendorf Tearing Tester

Digital Elmendorf Tearing Tester

  Digital Elmendorf Tearing Tester is a precision instrument used to measure the tear strength of materials like woven fabrics, paper, plastic films, and nonwovens. It determines how much force is required to continue tearing a pre-slit sample. Key Functions of Digital Elmendorf Tearing Tester: - Measures propagation tear resistance, not initial tear. - Uses a pendulum to apply force; the energy lost during tearing is calculated to determine tear strength. - Equipped with a digital display for direct reading of results in grams or millinewtons. Core Components: - Pendulum Arm: Applies tearing force. - Clamps: Secure the sample before and after the tear. - Cutting Blade: Creates a precise slit at the start of the test. - Digital Display Unit: Shows the tearing force result clearly and instantly. - Counterweights: Optional weights for increasing test range (for stronger materials).   Applications of Digital Elmendorf Tearing Tester: - Testing tear resistance of: - Textile fabrics (especially woven) - Paper and cardboard - Plastic films - Nonwovens - Packaging materials Benefits of Digital Elmendorf Tearing Tester:
  1. Accurate Tear Strength Measurement - Provides precise data on tear resistance, critical for quality control and product performance.
  2. Digital Readout - Easy-to-read display gives instant, reliable results without manual calculations.
  3. High Reproducibility - Ensures consistent test outcomes due to controlled tearing angle and speed.
 
  1. Fast Testing Process - Simple loading and quick test cycle increase lab efficiency.
  2. Suitable for Various Materials - Tests a wide range of flexible materials like textiles, paper, plastic, and packaging.
  3. Customizable Range - Use of optional weights extends the test range for low to high tear strength materials.
  4. Low Sample Waste - Requires small fabric or material samples, reducing waste during testing.
  5. Standards Compliance - Meets international testing standards (e.g., ASTM D1424, ISO 13937) for credibility and uniformity.
Features of Digital Elmendorf Tearing Tester: Digital Display - Provides accurate and direct reading of tear strength in grams, mN, or cN. Pendulum Mechanism - Uses a swinging pendulum to simulate tear propagation with consistent force. Adjustable Test Range - Includes interchangeable pendulum weights to test various material strengths.
  1. Precision Sample Clamp - Securely holds samples in place to ensure accurate tear initiation.
  2. Pre-Cutting Blade - Integrated knife creates a precise initial slit in the sample before tearing.
  3. User-Friendly Interface - Simple buttons and screen navigation for ease of operation.
  4. Standard Test Compliance - Compatible with ASTM D1424, ISO 1974, ISO 13937, and other tear strength standards.
  1. Sturdy Construction - Made with durable materials for long-lasting performance and stable operation.
  2. Compact Design - Space-efficient footprint ideal for laboratory environments.
  3. Data Output Options- Some models offer USB or printer connectivity for result documentation.
How to Use a Digital Elmendorf Tearing Tester:
  1. Prepare the Sample - Cut the material (fabric, paper, film, etc.) to standard size (typically 100 × 63 mm for textiles) and slit it with the pre-cutter as required.
  2. Select Pendulum Weight - Choose the appropriate pendulum or add counterweights based on expected tear strength.
  1. Calibrate the Machine - Set the pendulum to its starting position and zero the display.
  2. Clamp the Sample - Fix one half of the sample in the stationary clamp and the other in the moving clamp.
  3. Cut the Initial Slit - Use the integrated blade to make a precise cut at the marked slit area (usually 20 mm).
  1. Release the Pendulum - Trigger the pendulum to swing and tear the sample through the pre-slit.
  2. Read the Result - The digital display will show the tearing force automatically (in g, mN, or cN).
  3. Record or Export Data - Save or print the result if your model supports USB or printer connection.
  4. Reset for Next Test - Reposition the pendulum and prepare a new sample for the next cycle.
Safety Tip: - Always ensure your hands are clear before releasing the pendulum.   Digital Elmendorf tearing tester Scope of application It is used for the determination of the tear resistance of various woven fabrics (Elmendorf method), and it can also be used for the determination of the tear resistance of thick paper, plastic sheeting, electrical tape, etc. Related standards GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734 etc. Instrument characteristics 1. Maximum 300N test range 2. Microcomputer control, digital decoding, support online communication 3. Color touch screen control, Chinese and English menu operation interface 4. Pneumatic clamping, automatic cutting 5. A variety of measurement units (cN, gf) selection 6. Fully automatic operation with safe operation protection. 7. Automatically increase potential energy [Technical parameter]: 1. Test range: first gear: (0～16)N second gear: (0～32)N third gear: (0～ 64)N fourth gear: (0～128)N fifth gear: (0～300)N 2. Test accuracy: ≤±0.2%F·S 3. Tearing length: 43mm (non-standard 30-60mm can be set) 4. Automatic incision length: (20±0.2)mm 5. Sample size: (100×63)mm 6. Specimen clamping: pneumatic way 7. Sample test: Up to 10 sets per group on the device side, and 30 sets of data can be selected to be saved 8. Power supply: AC220V±10% 50Hz 100W 9. Dimensions: (650×660×680)mm 10. Weight: 50kg [Sample of control interface]:(English version is also available.)
Add to cart
Quick view
Digital hot plate-magnetic stirrer
Color Matching Cabinet -light Box

Digital hot plate-magnetic stirrer

,
$0.00

Digital hot plate-magnetic stirrer

Digital hot plate-magnetic stirrer

Digital hot plate-magnetic stirrer

  A digital hot plate-magnetic stirrer is a laboratory device that combines two essential functions: heating and stirring. It is widely used in chemistry, biology, and physics laboratories for preparing solutions, mixing chemicals, and conducting experiments that require controlled heating and stirring. Model : (DL-300) Brand : DUNLIN Origin : TAIWAN Set-up plate Dimensions : Ø 135 mm Motor type : DC Motor Speed range : 0-1500 rpm Display : 5 Inch LED Display Heating temperature range : Room Temp. 0-280°C Temperature display : 5 Inch LED Display Temperature display accuracy : ±0.1 Protection class according to DIN EN 60529 : IP42 Power Supply : 200-240V 3A Dimensions ( W x D x H ) : ( 255 x 152 x 80 ) mm Key Components of Digital hot plate-magnetic stirrer: Hot Plate (Heating Element): - Provides a flat surface that heats up electrically. - Controlled via a digital interface for setting precise temperatures. - Often features over-temperature protection for safety.
  1. Magnetic Stirrer:
- Uses a rotating magnetic field to spin a magnetic stir bar placed in the liquid. - Ensures even mixing of the solution without manual stirring. - Speed can be adjusted digitally.  
  1. Digital Display and Controls:
- Allows precise setting of temperature and stirring speed. - Typically includes an LCD or LED screen. - Some models have programmable settings and timers.  
  1. Temperature Sensors:   - Built-in or external probes (like a PT100 or thermocouple) for accurate temperature control.
  Features of Digital hot plate-magnetic stirrer: - Temperature Range: Usually ranges from ambient to 300°C or higher. - Stirring Speed: Typically ranges from 100 to 1500 RPM. Material: The top plate is often made from ceramic, aluminum, or stainless steel to ensure durability and chemical resistance.   Applications Digital hot plate-magnetic stirrer: - Dissolving solids in liquids. - Heating samples while stirring to ensure uniform temperature distribution. - Conducting chemical reactions that need constant stirring and controlled heat. - Biological and pharmaceutical sample preparation.     Benefits of using a Digital Hot Plate & Magnetic Stirrer in laboratory and industrial settings:
  1. Precision and Control- Digital Interface: Allows accurate setting and monitoring of temperature and stirring speed.- Consistent Results: Ensures reproducibility in experiments and solution preparations.
 
  1. Efficient Mixing and Heating- Uniform Mixing: Magnetic stirring eliminates hotspots and ensures even distribution of solutes.- Simultaneous Operation: Ability to heat and stir at the same time improves efficiency.
 
  1. Safety Features- Overheat Protection: Prevents accidents by automatically shutting off at unsafe temperatures.- Sealed Surface: Reduces risk of contamination and easy to clean.
 
  1. Versatility
- Suitable for a wide range of applications including chemical synthesis, biological experiments, and pharmaceutical processes.- Compatible with various types of containers and volumes.  
  1. Compact and User-Friendly- Takes up minimal bench space.- Simple to operate with user-friendly controls and displays.
  2. Durability- High-quality materials like ceramic or stainless steel tops resist corrosion and wear.
  3. Time-Saving Speeds up preparation of solutions and reactions compared to manual stirring and separate heating. Would you like these benefits presented in a slide format or for a product brochure?
Add to cart
Quick view