Spray Rating Tester
Spray Rating Tester
360 product view
    Click to enlarge
    Spray Rating Tester
    Spray Rating Tester
    Xenon Arc Light Fastness Tester
    Xenon Arc Light Fastness Tester $0.00
    Back to products
    Martindale abrasion tester updated
    Martindale abrasion tester Updated $0.00

    Spray Rating Tester

    $0.00

    Spray Rating Tester

    Spray Rating Tester

    Spray Rating Tester

     

    The Spray Rating Tester is a textile testing instrument used to evaluate the water resistance or water repellency of fabric surfaces. It measures how well a fabric can resist wetting when exposed to a controlled spray of water, helping assess its performance in rain or damp conditions.

     

    Purpose of Spray Rating Tester

    – To assess surface wetting resistance of textiles.

    – Commonly used for outdoor clothing, rainwear, tents, and performance fabrics.

     

    Working Principle of Spray Rating Tester

    – A fabric specimen is mounted at a 45° angle.

    – Water is sprayed from a standard nozzle for a specific time.

    – After spraying, the fabric is visually rated based on the appearance of water drops and wetting.

     

    Key Components of Spray Rating Tester

    – Spray Nozzle: Delivers a consistent, standard water spray.

    – Funnel & Reservoir: Controls the flow and volume of water.

    – Specimen Holder: Positions the fabric at a 45° angle.

    – Spray Stand: Ensures accurate nozzle height and positioning.

     

    Standards Used of Spray Rating Tester

    – AATCC 22

    – ISO 4920

    – BS EN 24920

     

    Applications of Spray Rating Tester

    – Rainwear and water-resistant textiles.

    – Quality control in fabric finishing.

    – R&D for performance apparel.

     

    Benefits of Spray Rating Tester:

    1. Quick and Simple Evaluation – Offers a fast way to assess fabric water repellency without complex setup.
    2. Standardized Testing- Complies with AATCC 22 and ISO 4920, ensuring globally accepted results.
    3. Cost-Effective- Low maintenance and no power requirement make it economical for routine lab use.

     

    1. Improves Fabric Performance – Helps manufacturers develop or improve water-resistant textiles.
    2. Non-Destructive Test – Does not damage the fabric, allowing for additional tests on the same sample.
    3. Visual Grading- Easy to interpret using a standard spray rating chart (0 to 100 scale).
    4. Supports Quality Control – Detects finish degradation or variation in water-repellent treatments.
    5. Portable and Compact- Lightweight design allows easy use in various lab or field settings.

     

    Features of Spray Rating Tester:

    1. Standardized Spray Nozzle – Delivers consistent water spray per AATCC and ISO specifications.
    2. 45° Specimen Mounting Angle – Ensures uniform test setup for accurate and repeatable results.
    3. Stainless Steel or Aluminum Frame – Corrosion-resistant and durable for long-term use with water exposure.

     

    1. Water Reservoir and Funnel System – Provides precise water volume (usually 250 ml) for each test.
    2. Graduated Spray Stand- Fixed height (150 mm above specimen) for controlled spray impact.
    3. Detachable Specimen Holder- Easy loading and removal of fabric samples.
    4. Compact and Lightweight Design – Portable and convenient for both lab and field testing.
    5. No Electricity Required – Fully manual operation increases reliability and reduces operating costs.

     

    How to Use Spray Rating Tester:

    1. Prepare the Sample – Cut fabric to standard size (usually 180 × 180 mm). – Condition the sample if required (21°C, 65% RH for 24 hours).
    2. Mount the Fabric – Place the fabric on the specimen holder at a 45° angle.
    3. Fill the Reservoir – Pour 250 ml of distilled water into the upper funnel.

     

    1. Start the Test – Release the water through the nozzle; it sprays over the fabric for about 25–30 seconds.
    2. Inspect the Fabric – After spraying, visually assess the water beading or penetration on the surface.
    3. Rate the Sample – Compare the fabric’s wetting pattern with the standard spray rating chart: – 100 = No sticking/wetting – 90–50 = Partial wetting – 0 = Complete wetting
    4. Record the Rating – Document the spray rating for quality control or reporting.

     

    Spray Rating Tester,
    Water Repellency Tester
    Spray Reting Tester

    [Scope of application]:
    Used for the determination of moisture resistance (wetting grade) of various fabrics
    which have been or have not been treated with water resistance or water repellency.
    [related standards]:
    GB/T4745 ISO4920 AATCC22 JISL1092 etc.
    [technical parameters]:
    1. Glass funnel:150 x 150 (capacity 500ml)
    2. Specimen placement angle:The level is 45 degrees.
    3. Distance from nozzle to sample center:150mm
    4. Specimen diameter:Ф150mm
    5. Size of water receiving pan:500×400×30mm
    6. Matching measuring cups:500ml
    7, size 500 x 400 x 500mm
    8. Instrument weight:5Kg

    Category: Tags: , , , , Brand: ,
    Description

    Spray Rating Tester

    Spray Rating Tester

    Spray Rating Tester

     

    The Spray Rating Tester is a textile testing instrument used to evaluate the water resistance or water repellency of fabric surfaces. It measures how well a fabric can resist wetting when exposed to a controlled spray of water, helping assess its performance in rain or damp conditions.

     

    Purpose of Spray Rating Tester

    – To assess surface wetting resistance of textiles.

    – Commonly used for outdoor clothing, rainwear, tents, and performance fabrics.

     

    Working Principle of Spray Rating Tester

    – A fabric specimen is mounted at a 45° angle.

    – Water is sprayed from a standard nozzle for a specific time.

    – After spraying, the fabric is visually rated based on the appearance of water drops and wetting.

     

    Key Components of Spray Rating Tester

    – Spray Nozzle: Delivers a consistent, standard water spray.

    – Funnel & Reservoir: Controls the flow and volume of water.

    – Specimen Holder: Positions the fabric at a 45° angle.

    – Spray Stand: Ensures accurate nozzle height and positioning.

     

    Standards Used of Spray Rating Tester

    – AATCC 22

    – ISO 4920

    – BS EN 24920

     

    Applications of Spray Rating Tester

    – Rainwear and water-resistant textiles.

    – Quality control in fabric finishing.

    – R&D for performance apparel.

     

    Benefits of Spray Rating Tester:

    1. Quick and Simple Evaluation – Offers a fast way to assess fabric water repellency without complex setup.
    2. Standardized Testing- Complies with AATCC 22 and ISO 4920, ensuring globally accepted results.
    3. Cost-Effective- Low maintenance and no power requirement make it economical for routine lab use.

     

    1. Improves Fabric Performance – Helps manufacturers develop or improve water-resistant textiles.
    2. Non-Destructive Test – Does not damage the fabric, allowing for additional tests on the same sample.
    3. Visual Grading- Easy to interpret using a standard spray rating chart (0 to 100 scale).
    4. Supports Quality Control – Detects finish degradation or variation in water-repellent treatments.
    5. Portable and Compact- Lightweight design allows easy use in various lab or field settings.

     

    Features of Spray Rating Tester:

    1. Standardized Spray Nozzle – Delivers consistent water spray per AATCC and ISO specifications.
    2. 45° Specimen Mounting Angle – Ensures uniform test setup for accurate and repeatable results.
    3. Stainless Steel or Aluminum Frame – Corrosion-resistant and durable for long-term use with water exposure.

     

    1. Water Reservoir and Funnel System – Provides precise water volume (usually 250 ml) for each test.
    2. Graduated Spray Stand- Fixed height (150 mm above specimen) for controlled spray impact.
    3. Detachable Specimen Holder- Easy loading and removal of fabric samples.
    4. Compact and Lightweight Design – Portable and convenient for both lab and field testing.
    5. No Electricity Required – Fully manual operation increases reliability and reduces operating costs.

     

    How to Use Spray Rating Tester:

    1. Prepare the Sample – Cut fabric to standard size (usually 180 × 180 mm). – Condition the sample if required (21°C, 65% RH for 24 hours).
    2. Mount the Fabric – Place the fabric on the specimen holder at a 45° angle.
    3. Fill the Reservoir – Pour 250 ml of distilled water into the upper funnel.

     

    1. Start the Test – Release the water through the nozzle; it sprays over the fabric for about 25–30 seconds.
    2. Inspect the Fabric – After spraying, visually assess the water beading or penetration on the surface.
    3. Rate the Sample – Compare the fabric’s wetting pattern with the standard spray rating chart: – 100 = No sticking/wetting – 90–50 = Partial wetting – 0 = Complete wetting
    4. Record the Rating – Document the spray rating for quality control or reporting.

     

    Spray Rating Tester,
    Water Repellency Tester
    Spray Reting Tester

    [Scope of application]:
    Used for the determination of moisture resistance (wetting grade) of various fabrics
    which have been or have not been treated with water resistance or water repellency.
    [related standards]:
    GB/T4745 ISO4920 AATCC22 JISL1092 etc.
    [technical parameters]:
    1. Glass funnel:150 x 150 (capacity 500ml)
    2. Specimen placement angle:The level is 45 degrees.
    3. Distance from nozzle to sample center:150mm
    4. Specimen diameter:Ф150mm
    5. Size of water receiving pan:500×400×30mm
    6. Matching measuring cups:500ml
    7, size 500 x 400 x 500mm
    8. Instrument weight:5Kg

      Shipping & Delivery

      Related products

      Fatigue tester for Elastic fabric

      Fatigue tester for Elastic fabric

      ,
      $0.00

      Fatigue Tester for Elastic Fabric

      Fatigue tester for Elastic fabric

      Fatigue tester for Elastic fabric

        A Fatigue Tester for Elastic Fabric is a specialized instrument designed to evaluate the durability and performance of elastic materials, such as elastic bands, tapes, and fabrics, under repeated stretching and relaxation cycles. This testing is crucial for applications where elastic materials are subjected to continuous or repetitive stress, ensuring they maintain their functionality over time.   Purpose Fatigue Tester for Elastic Fabric The primary objective of this tester is to simulate the conditions that elastic fabrics endure during actual use. By repeatedly stretching and relaxing the material, the tester assesses:   - Elastic Recovery: The ability of the material to return to its original length after stretching. - Fatigue Resistance: How well the material withstands repeated cycles without significant degradation. - Durability: The lifespan of the elastic properties under continuous use.   Working Principle of Fatigue Tester for Elastic Fabric The tester operates by clamping a specimen of the elastic fabric and subjecting it to cyclic stretching and relaxation.   Key operational features include: Cycle Count: The number of stretching and relaxation cycles is set according to testing requirements. - Speed Regulation: The rate of stretching can be adjusted to simulate different usage conditions. - Monitoring: The tester records data such as the number of cycles completed and any changes in the fabric's properties.   For instance, the Elastic Band Fatigue Tester ADL-FT01 features a high-speed linear slide, servo motor, and touch screen control software, allowing precise control over stretching parameters   Key Specifications of Fatigue Tester for Elastic Fabric While specifications may vary among different models, common parameters include: - Stretch Percentage: Adjustable from 0% to 100%. - Stretching Speed: Up to 40 cycles per minute. - Sample Length Range: Maximum of 260mm. - Cycle Count Capacity: Up to 9,999,999 cycles. - Control Interface: Typically a 7-inch color touch screen. - Power Supply: AC220V 50Hz/60Hz. These features enable comprehensive testing of elastic materials under various conditions.   Benefits of Fatigue Tester for Elastic Fabric - Quality Assurance: Ensures that elastic materials meet required durability standards. - Product Development: Aids in the design of materials with improved fatigue resistance. Cost Efficiency: Identifies potential material failures early, reducing product returns and warranty claims. - Compliance: Helps manufacturers adhere to industry standards such as GB/T 37635.   Applications of Fatigue Tester for Elastic Fabric Fatigue testers for elastic fabrics are widely used in: - Textile Manufacturing: Testing elastic components in garments, such as waistbands and cuffs. - Medical Textiles: Evaluating the durability of elastic materials used in bandages and supports. - Automotive Industry: Assessing elastic components in car interiors. - Research and Development: Developing new elastic materials with enhanced properties.   Features of Fatigue Tester for Elastic Fabric:
      1. Adjustable Stretch Range - Allows setting stretch levels (e.g., 0–100%) to simulate real-life fabric use.
      2. High-Cycle Capability - Supports up to millions of stretch-relax cycles for long-term fatigue analysis.
      3. Touch Screen Control - 7-inch color display for easy setup, monitoring, and data entry.
      4. Servo Motor Driven - Ensures precise and smooth linear motion during testing.
       
      1. Customizable Speed - Adjustable test speed (e.g., up to 40 cycles per minute) based on test requirements.
      2. Multi-Sample Testing - Some models allow testing multiple specimens simultaneously.
      3. Cycle Counter with Alarm - Built-in counter with programmable stop after preset cycles and auto-alert feature.
       
      1. Durable Construction - Robust metal frame suitable for continuous testing in lab environments.
      2. Standard Compliance - Designed to follow standards like GB/T 37635 for elastic fabric testing.
        How to Use Fatigue Tester for Elastic Fabric:
      1. Prepare the Sample
      - Cut the elastic fabric to the specified size (e.g., 260 mm max length). - Mark the gauge length if needed for measurement after testing.
      1. Mount the Sample - Secure both ends of the fabric in the upper and lower clamps.
      2. Set Test Parameters
      - Enter the desired stretch percentage (e.g., 50%). - Set the number of cycles and speed (e.g., 30 cycles/min). - Adjust dwell time if required (time fabric stays stretched).  
      1. Start the Test - Press start on the touch screen interface. - The machine will cyclically stretch and release the sample.
      2. Monitor Progress - Observe operation or let it run automatically.
      - Machine stops automatically after reaching the set cycles.
      1. Remove and inspect - Take out the fabric and measure elongation, recovery, or visual defects.
      2. Record and Compare Results - Compare with initial measurements or standard performance criteria.
        Fatigue tester for Elastic fabric

        Fatigue tester for Elastic fabric

         
      Add to cart
      Quick view
      Random Tumble Pilling Tester

      Random Tumble Pilling Tester

      $0.00

      Random Tumble Pilling Tester

      Random Tumble Pilling Tester

      Random Tumble Pilling Tester

        The Random Tumble Pilling Tester is a specialized instrument designed to assess the pilling resistance of textile fabrics. Pilling refers to the formation of small, fuzzy balls (pills) on the fabric surface due to wear and friction. This tester simulates the wear conditions that fabrics experience during actual use, providing valuable data on their durability and appearance retention.   Purpose of Random Tumble Pilling Tester The primary function of the Random Tumble Pilling Tester is to evaluate how fabrics resist pilling, fuzzing, and matting. This assessment is crucial for manufacturers aiming to ensure the longevity and aesthetic quality of their textile products.   Working Principle of Random Tumble Pilling Tester The tester operates by placing fabric specimens into cylindrical test chambers lined with cork. Inside each chamber, a stainless steel impeller rotates at a high speed (typically around 1200 revolutions per minute), causing the fabric samples to tumble randomly. Compressed air is injected to enhance the tumbling action. This process simulates the friction and wear that fabrics undergo during regular use. After a predetermined duration, the samples are removed and visually assessed for pilling using standardized rating scales.   Key Specifications of Random Tumble Pilling Tester Test Chambers: Available in configurations of 2 or 4 chambers to accommodate multiple samples simultaneously. - Rotation Speed: Approximately 1200 revolutions per minute. - Chamber Dimensions: Typically around 146 mm in diameter and 152 mm in length. - Impeller Size: Standard impellers measuring about 121 mm. - Compressed Air Pressure: Adjustable, commonly between 14–21 kPa (2–3 psi). - Timer: Digital timer allowing precise control over test duration. - Power Supply: Generally operates on 220V, 50Hz power sources.   Applicable Standards of Random Tumble Pilling Tester The Random Tumble Pilling Tester complies with several international testing standards, ensuring its suitability for global applications:- ASTM D3512- ISO 12945-3- DIN 53867- JIS L 1076- GB/T 4802.4   Benefits of Random Tumble Pilling Tester - Realistic Simulation: Accurately replicates the wear and friction conditions fabrics face during actual use.- Standardized Testing: Adheres to international standards, facilitating consistent and comparable results.- Efficient Evaluation: Allows simultaneous testing of multiple samples, increasing laboratory throughput.- Quality Assurance: Provides manufacturers with critical data to improve fabric formulations and production processes. User-Friendly Operation: Features intuitive controls and clear viewing windows for easy monitoring.   Applications of Random Tumble Pilling Tester The Random Tumble Pilling Tester is widely used in various sectors of the textile industry: - Apparel Manufacturing: Assessing the durability of clothing fabrics. - Home Textiles: Evaluating materials used in upholstery, curtains, and bedding. - Quality Control Laboratories: Routine testing to ensure product consistency and compliance with standards.- Research and Development: Developing new fabrics with enhanced resistance to pilling.     Features of Random Tumble Pilling Tester:
      1. Multiple Test Chambers - Typically comes with 2 or 4 cork-lined chambers for simultaneous testing of multiple fabric samples.
      2. High-Speed Rotating Impellers - Impellers rotate at around 1200 rpm to create intense, random tumbling motion.
       
      1. Compressed Air System - Ensures continuous fabric movement and realistic simulation of wear.
      2. Digital Timer- Allows precise setting of test duration with easy-to-read display.
      3. Viewing Windows- Transparent chamber doors for monitoring fabric movement during testing.
      4. Standard Compliant Design- Meets ASTM D3512, ISO 12945-3, GB/T 4802.4 and other major standards.
       
      1. Robust Construction- Durable materials and components designed for long-term laboratory use.
      2. Easy Sample Handling - Quick-open chamber lids and simple sample placement process.
      3. Compact Footprint- Saves space in laboratory environments.
        How to Use Random Tumble Pilling Tester:
      1. Prepare Samples- Cut fabric into standard-sized specimens (usually circular or rectangular per ASTM/ISO specs)- Condition samples as per the standard (usually 24 hrs at 21°C, 65% RH).
      2. Load the Chambers - Place each sample into a cork-lined test chamber. - Add a small piece of gray cotton backing fabric if required by the method.
       
      1. Set Parameters - Adjust compressed air pressure (typically 14–21 kPa or 2–3 psi).
      - Set the test time (e.g., 30–60 minutes) using the digital timer.
      1. Start the Test- Close the chamber doors and press start. - Impellers rotate, tumbling the samples randomly with air flow.
       
      1. Stop and Unload - Once the timer ends, remove the samples carefully.
      2. Evaluate Pilling - Compare the tested samples to standard pilling rating photographs or scales.
      - Assign a rating from 1 (severe pilling) to 5 (no pilling).
      1. Record Results - Document the pilling grades and any observations.
          Random Tumble Pilling Tester [Scope of application]: It is used to test the fuzzing and pilling performance of the fabric under the condition of free rolling and friction in the drum. [Related standards]: GB/T4802.4 (Standard Drafting Unit) ISO12945.3, ASTM D3512, ASTM D1375, DIN 53867, ISO 12945-3, JIS L1076, etc. [Technical parameter]: 1. Number of boxes: 4 2. Roller specifications: diameter (146±1.0) mm, depth (152.4±1.0) mm; 3. Lining material: polychloroprene lining thickness (3.2±0.4) mm. , Hardness (60～70) IRHD; 4. Impeller specifications: φ12.7 mm×120.6 mm; 5. Plastic blade specifications: 10 mm×65 mm; 6. Rotation speed: 1～2400 rpm can be set freely 7. Working pressure: 14kPa～21kPa; 8. Time counting: (1～999) min. 9. Power supply: AC220V±10% 50Hz 80W 10. Appearance: (480×400×680)mm 11. Weight: 40kg [Standard accessories] Items and specifications Qty. Note Fuse 2 3A Main machine 1 Power cable 1 Air tube 1 Φ8mm Grey cotton sliver 4 Cork lining 4 Rating sample photo 1 White glue 1    
      Add to cart
      Quick view
      Counting Balance-Weighing Scale
      Counting Balance-Weighing Scale

      Counting Balance-Weighing Scale

      , ,
      $0.00

      Counting Balance-Weighing Scale

      Counting Balance-Weighing Scale

      Counting Balance-Weighing Scale

        A Counting Balance-Weighing Scale (or Counting Weighing Scale) is a precision electronic scale designed to weigh items and simultaneously count them based on individual piece weight. It’s commonly used in industries for inventory management, packaging, and quality control.   Purpose of Counting Balance-Weighing Scale: To quickly and accurately count small items like buttons, beads, screws, or pills by weight. Eliminates manual counting, especially for large quantities.   Working Principle of Counting Balance-Weighing Scale: Weigh a sample quantity of items to determine the average weight of one piece. Place a bulk quantity on the scale. The scale divides the total weight by the unit weight to calculate the total item count.     Applications of Counting Balance-Weighing Scale: Textile accessories (buttons, rivets) Hardware (nuts, bolts, washers) Electronics (resistors, chips) Pharmaceuticals (tablets, capsules) Benefits of Counting Balance-Weighing Scale:   Fast and Accurate Counting - Saves time by quickly counting large quantities of small items. Reduces Human Error- Eliminates mistakes common in manual counting. Improves Productivity - Speeds up packing, inventory, and quality control processes. Versatile Use - Suitable for various industries: textiles, hardware, pharmaceuticals, electronics.   Cost-Efficient- Reduces labor costs and improves operational efficiency. Compact and Portable - Easy to move and use in different workstations. Dual Functionality - Can be used for both counting and standard weighing. Memory and Tare Functions - Stores unit weights and allows container weight deduction.   Features of Counting Balance-Weighing Scale: High Precision Sensors- Ensures accurate weight and count, even for tiny components. Digital Display- Separate displays for total weight, unit weight, and piece count. Tare Function - Allows deduction of container weight for net measurements. Memory Function - Stores frequently used unit weights for fast recall.   Multiple Units Support- Measures in grams, kilograms, pounds, etc. Sample Size Selection- Users can set sample sizes (e.g., 10, 20, 50 pcs) to calculate piece weight. Overload Protection- Prevents damage from excessive weight. Auto Calibration - Maintains long-term accuracy with internal or external calibration options. Sturdy Platform- Stainless steel pan with anti-slip design for stable weighing. Battery and AC Operation- Can run on rechargeable batteries or power adapter.   How to Use Counting Balance-Weighing Scale: Turn On the Scale - Power it on and wait for the display to stabilize at zero. Tare the Container - Place an empty container on the pan and press the "TARE" button to zero out its weight. Set Sample Size - Place a known quantity (e.g., 10 or 20 pcs) of identical items on the scale. - Enter the sample quantity using the keypad. Confirm Unit Weight - The scale calculates and stores the average unit weight automatically. Add Bulk Items - Add the rest of the items into the container. - The display will show the total count based on the stored unit weight. Record Results   - Note down the total piece count and remove the items. Turn Off After Use - Power off the scale to save battery or electricity.     Counting Balance /Weighing Scale Model : DS610C Brand : DIGISCALE Origin : Germany Capacity : 3 kg Division : 0.1g Min Weight : 0.5g Grade : Class 3 Platter : 280 × 215mm Battery : Rechargeable Battery with AC Adaptor Display : Double Large LCD Display Warranty : One Year Service Warranty SPECIFICATION Build With 5 Measuring Units: kg, g, lb, oz, PCS Count Platter : 280 × 215mm Quality : Heavy Duty Premium Quality Product Net / Gross Weight : 3080g / 3130g Battery : Rechargeable Battery with AC Adaptor Battery Capacity: 6V 4.5Ah / 20 HR Adaptor Power Input : AC 220V-240V / 50Hz Adaptor Power Output : 10V DC/ 500mA Display : Double Large LCD Display Color : White-Gray Keyboard : 20 Members Key Operating Temperature : 0-40°C (32-104°F) FEATURES Auto Zero Tracking Automatic Overload Display Grade Class 3 Auto Backlight Double LCD Display Low Battery Indication Rechargeable Battery with Adaptor Save Electricity Advantage Piece Counting Functionality: The DS603C Counting Weighing Scale is prepared with an precise piece checking highlight, perfect for stock administration, generation lines, and quality control assignments. This guarantees you can tally things like screws, jolts, or other little components efficiently. High-Precision Digital Scale Display: The advanced scale show gives clear and precise readings, making it simple to screen weight and amount. Its shinning and natural interface guarantees ease of use in diverse lighting conditions. Digital Scale Calibration: To keep up exactness, the DS610C weighing scale calibration prepare is direct, guaranteeing the scale remains dependable over time. Normal weight scale calibration ensures reliable execution, indeed with overwhelming use. Durable and Reliable Build: The DS610C advanced weight scale is created with strong materials to withstand visit utilize in requesting situations, such as stockrooms and fabricating facilities. Versatility: As a weighing and tallying scale, it combines the benefits of weight estimation and piece tallying in one gadget. This makes it appropriate for a wide extend of applications, from retail to mechanical uses. Categories: Digital Scale and Balance, Piece Counting Scale, Table Top Scale
      Counting Balance-Weighing Scale

      Counting Balance-Weighing Scale

       
      Add to cart
      Quick view
      Pneumatic bursting tester

      Bursting strength tester

      ,
      $0.00
      Bursting strength tester

      Pneumatic bursting strength tester

      true burst

      Pneumatic bursting tester China national patent：ZL201210486480.8 ZL201220628425.3 Pneumatic bursting strength tester China national patent：ZL201210486480.8 ZL201220628425.3 [Scope of application]: It is used to measure the burst strength and burst expansion degree of various fabrics, including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other fabrics made by other processes, under standard conditions or wet conditions. This method is employed to assess the burst strength and degree of burst expansion of various types of fabrics, such as knitted, woven, non-woven, laminated, and others produced through different processes, under both standard and wet conditions. This technique is utilized to evaluate the burst strength and extent of burst expansion in various fabric types, including knitted, woven, non-woven, laminated, and others produced through diverse manufacturing processes, under both standard and wet conditions. Benefits of Bursting strength tester: Fast testing cycle for fast feedback to the production • Auto-start, a photocell detects the presence of a sample and automatically initiates a measurement sequence, thus allowing hands-free operation • Auto-cycling function permits the continuous cycling of the upper pressure foot to facilitate representative and continuous measurements
      • Available with automatic test strip feeder Measurements are simple to make with the Mullen type Bursting Strength Tester. Fast automatic measurements Measurement starts automatically once a test piece has been placed in the measuring gap. The clamping foot descends, and a bursting strength measurement is made.
      The sample is then quickly released and is ready for the next measurement at a new position. To maximize the sample measurement rate, the tester uses a minimum of time between the bursts, so that a series of 10 measurements can be done in less than 45 seconds. The actual measuring time depends of course on the type of paper or paper board being tested. Three Different test results can be reported after a single measurement; bursting strength standard, bursting strength compensated, and bursting energy absorption (BEA).Bursting strength tester can be compensated for the stiffness of the diaphragm For low bursting strength levels, the stiffness of the diaphragm can account for a large portion of the bursting strength value. If desired, the device can also measure, calculate, and report effective bursting strength compensated from the effects of the diaphragm. Measurement of Bursting Energy Absorption (BEA) is used to determine the energy absorption capability of a material. Strong, flexible paper has higher energy absorption values, while brittle, stiff paper has lower values. Bursting Strength Tester calculates and reports BEA according to the SCAN P 24 standard Related standards of Bursting strength tester: GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc. [Instrument characteristics]: 1. Microcomputer control, automatic burst test, automatic correction, automatic data processing, and output results in the form of experimental report. 2. Aerodynamics, high cleanliness. 3. Color touch screen interface, Chinese and English menu operation, support online communication.
      1. Bursting pressure can reach up to 1.2MPa 5. The maximum burst and expansion degree can reach 70mm. 6. Strengthen the lighting system on the test surface. 7. The main aerodynamic force helps to clamp the sample system. 8. A variety of test areas are available, and the switching is easy.
      2. A variety of unit conversions between Chinese and English. 10. Reliable anti-pinch safety protection design. [Technical parameter]: 1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized) 2. The minimum graduation value: 0.0001Mpa 3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree pressurization.
      4. Test accuracy: ≤±0.2%F·S 5. Thickness of elastic diaphragm: ≤2mm 6. Testing area: cm²） 100 50 10 7.3 Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5 7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min 8. Safety cover: high-transparent plexiglass 9. Power supply: AC220V±10% 50Hz 800W 10. Dimensions: (470×490×780)mm (host L×W×H)
      Add to cart
      Quick view
      VeriVide Colour Assessment Cabinets
      Color Matching Cabinet -light Box

      VeriVide Colour Assessment Cabinets

      , ,
      $0.00

      VeriVide Colour Assessment Cabinets

      VeriVide Colour Assessment Cabinets VeriVide offers high-quality Colour Assessment Cabinets (CACs) such as the CAC 60-4, CAC 60-5, and CAC 120-4&5. These cabinets, originating from the UK, are reliable tools for visual evaluation in quality assurance, meeting national, international, and retailer standards. They effectively mitigate issues related to color assessment.VeriVide Colour Assessment Cabinets High-quality visual evaluation tool for quality assurance. Adhering to national, international and retailer standards.Colour Assessment Cabinet's (CACs) reduce problems associated with assessing products or samples in different environments,be though geological or seasonal, offering a cost-effective method to ensure visual accuracy and product quality. Color Light Box Enhance color precision with VeriVide's cutting-edge Colour Assessment Cabinets. These cabinets are meticulously designed to ensure accurate color evaluation in various industries. Invest in VeriVide Colour Assessment Cabinets to elevate your color assessment process.  Enhance Color Precision with VeriVide's Cutting-Edge Assessment Cabinets, which meet or surpass ISO 3664 and BS 950 Part 1 international standards. The cabinets are adaptable to user requirements, with lamp options to choose different light sources. Available in 60, 120, and 150cm widths, VeriVide Colour Assessment Cabinets provide a flexible solution for accurate color assessment. Incorporate user-friendly features like servicing indicator, auto sequence, warm-up, power save and data storage.4 or 5 light source options Versions available for colour fastness testing and particulate testing both adhering to global standardsEnsure  that you are using the best equipment available as they provide the best fluorescent D65 daylight simulator, with the highest Colour   Rendering Index (CRI), available. VeriVide Colour Assessment Cabinets products are known as light boxes, viewing booths, colour cabinets and others, depending on which industry or country they are serving in. They are used within a wide array of industry sectors throughout the world including textile and apparel, graphics, automotive, ceramics, cosmetics, pharmacology (CAC Particulate),   food, footwear, packaging and printing.Download the Datasheet below for more information or click 'VeriVide CAC Datasheet Here' to get in touch with colour experts. VeriVide CAC Datasheet Here Features of VeriVide Colour Assessment Cabinets • CAC 60, CAC 120 and CAC 150 accommodate 60, 120 and 150cm tubes respectively
      • Either 4 or 5 light sources available for each model including D65, D50, 840P15, F and UV - see Lamp Options.• Internal finishes in Munsell N5, Munsell N7 or Grey 5574 • Diffuser and/or dimmer options available​ Dimensions of VeriVide Colour Assessment Cabinets CAC 60-4 Dimensions (mm) Width Height Depth Overall 710 545 420
      Viewing Area 680 360 380 CAC 60-5 Dimensions (mm) Width Height Depth Overall 710 545 540 Viewing Area 680 360 495 CAC 120-4 and CAC 120-5 Dimensions (mm) Width Height DepthOverall 1290 755 620 Viewing Area 1260 570 585 CAC 150-4 and CAC 150-5 Dimensions (mm) Width Height Depth Overall 1560 755 620 Viewing Area 1530 570 585 Lamp Options of VeriVide Colour Assessment Cabinets Features of VeriVide Colour Assessment Cabinets Lamp specifications: CIE Daylight Illuminants Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code D75 VeriVide D75 "Artificial Daylight" Correlated colour temperature 7500K. Conforming to the USA ASTM (American Society for Testing and Materials) D1729-82 standard for D75 Illuminant. With high CIE specifications, for accurate colour matching. 96 600mm 20w T12 600D75 D65 VeriVide D65 "Artificial Daylight" VeriVide D65 “Artificial Daylight”. Correlated colour temperature 6500K. Within the tolerances prescribed in BS 950: Part 1; and all international specifications for D65 illluminant. Specified for most applications where there is a need to maintain colour consistency and quality.Conforming highly to the CIE specifications, for accurate colour matching. 98 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 600D65 1200D65 1500D65 D50 D50 "Artificial   Daylight" Correlated colour temperature of 5000K. For the Graphic Technology and Photography industries. D50 lamps conform to BS 950: Part 2 and ISO 3664. Recommended for transmitted light source to view transparencies and for the reflected light source to view reproductions. 98 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 60095 120095 150095 CIE Illuminant 'A' Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code'F' Tungsten Filament Tungsten Filament Lighting. Approximate color temperature of 2800K. Required by BS 950: Part 1 as a test for metamerism (approximating CIE Illuminant ‘A’). Typical light source used within domestic environments. 100 Globe Globe Round Clear-   284mm Opal-284mm 40w60w 150w 60w 60w 45mm 45mm - 40G450 60G450 150FILO 28460CL28460OP'A' Tungsten Halogen Tungsten Halogen Lighting (CIE Illuminant ‘A’). This represents incandescent A (inc-A) with a colour temperature of 2856K. Typical light source used within domestic environments. Used to check for metamerism. 100 - 35w - HALO/12V /35WLP Alternative (fluorescent) lighting / Point of SaleLight Source Name Lamp Description C.R.I. Length Watts Diam Product Code840 P15 VeriVide 840P15 Narrow Band Triphosphor Fluorescent Lamps. Correlated colour tempera ture of 4000K. CIE Illuminant F11. Often chosen as a European “Point of Sale” light source, with good colour rendering and manufactured to a tighter tolerance specification as prescribed by Marks & Spencer. (Formerly TL84P15) 85 600mm 1200mm 1500mm 18w 36w 58w T8 T8T8 60084P15120084P15 150084P15CWF Cool White Cool White Broad Band Fluorescent Lamps. Correlated colour temperature of 4000K. Used as an American “Point of Sale” light source. Moderate colour rendering. 62 600mm 1200mm 1500mm 20w 40w 65/80w T12 T12 T12 60033 120033 150033U35 Ultralume 35 Ultralume Narrow Band Triphosphor Fluorescent Lamp.Correlated colour temperature 3500K. An American “Point of Sale” light source, with good colour rendering. 86 600mm 1200mm 17w 32w T8 T8 T8 600U35 1200U35 830 830 Narrow Band Triphosphor Fluorescent Lamp. Correlated colour temperature 3000K. Often chosen as a European “Point of Sale” light source with good colour rendering.(Formerly TL83) 85 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 60083 120083 150083 Horizon Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code 'H' Horizon Lighting Colour temperature 2300K. Used for Automotive, Apparel and Metamerism Testing. As specified by the ASTM (American Society for testing and Materials) D1729-74, Standard Practise for Visual Evaluation of Colour Differences of Opaque Materials. 98 - 75w - HALO/12V /75WUltraviolet Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code UV Ultraviolet Ultraviolet Blacklight. Used to detect the presence of Optical Brightening Agents and/or Fluorescent dyes. Therefore it is useful when assessing white and Fluorescent shades to check the level present and its evenness. N/A Clear-450mm Blacklight-600mm 15w 18w T8 T8 450UV15 600UV18 Paint specification of  VeriVide Colour Assessment Cabinets PAINT (For Cabinet Interiors) Name Description Quantity Product Code Crown Plain Grey 5574 Matt Emulsion 0.5 Litre Tins 5574 0.5L Munsell N5 0.5 Litre Tins N5 0.5L Munsell N7 0.5 Litre Tins N7 0.5L VERIVIDE MAINTENANCE PACK The VeriVide Maintenance Pack includes Cleaning Materials, Brush & Roller plus 0.5 litres of Paint.   https://maamtexbd.com/product/verivide-colour-assessment-cabinets/
      Add to cart
      Quick view
      Digital Bench top PH Meter
      Digital Bench top PH Meter

      Digital Bench top PH Meter

      $0.00

      Digital Bench top PH Meter

      Digital Bench top PH Meter

      Digital Bench top PH Meter

      Brand: Hanna Model: HI2002 Country of Manufacture: Romania Origin: USA

      Digital Bench top PH Meter

      Single parameter of Digital Bench top PH Meter features user-friendly tablet design with bench, portable or wall mount options for ultimate flexibility. Switch from portable to bench in the same procedure or clear the surface for easier working and hang on the wall. Digital Bench top PH Meter Range -2.00 to 16.00pH; pH  Digital smart electrode compatible  Accuracy: ±0.01 pH edge® pH is dedicated to testing pH. Using Hanna's latest innovation in technology and design, edge® can be adapted to suit your working method. Select from hand held, wall mount or bench top - or switch between them all. edge® is happy any which way. Simply plug in the electrode, then play. Measurement is simpler, quicker and more accurate than ever. Results are fast and reliable. Combining high precision technology with the user-friendly dimensions and format of a small digital tablet, edge® is breaking new ground in electrochemistry. This is a must-have meter for your laboratory.
      pH Range basic mode: -2.00 to 16.00 pH; standard mode: -2.000 to 16.000 pH
       Resolution basic mode: 0.01 pH; standard mode: 0.001 pH
       Accuracy (@25°C) basic mode: ±0.01 pH; standard mode: ±0.002 pH
       Calibration basic mode: automatic, up to three points calibration, 5 standard buffers available; standard mode: automatic, up to five point calibration, 7 standard buffers available and two custom buffers
      Temperature Compensation automatic, -5.0 to 100.0°C (using integral temperature sensor)
      Electrode Diagnostics standard mode: probe condition, response time and out of calibration range
      mV pH Range ±1000 mV
       Resolution 0.1 mV
       Accuracy (@25°C) ±0.2 mV
      ORP Range ±2000 mV
       Resolution 0.1 mV
       Accuracy (@25°C) ±0.2 mV
      Temperature Range -20.0 to 120.0°C
       Resolution 0.1°C
       Accuracy ±0.5°C
      Additional Specifications:
       Probe HI-11310 digital glass body pH electrode with 3.5mm connector and 1m cable
       Logging up to 1000 (400 for basic mode) records organised in: manual log-on demand (max. 200 logs), manual log-on-stability (max. 200 logs), interval logging (max. 600 samples; 100 lots)
       Connectivity 1 USB port for storage; 1 micro USB port for charging and PC connectivity
       Environment 0 to 50°C; RH max 95% non-condensing
       Power Supply 5 VDC adapter (included)
       Dimensions 2020 x 140 x 12 mm
       Weight 250 g
      A Digital Bench Top pH Meter is a laboratory-grade instrument designed to measure the pH (acidity or alkalinity) of liquid samples with high precision. It's commonly used in research labs, industrial applications, environmental testing, and educational institutions. Key Features of a Digital Bench Top pH Meter
      1. High Accuracy and Resolution
      - Offers precise pH measurements, often with accuracy up to ±0.01 pH units. - Suitable for applications where exact pH control is critical.  
      1. Digital Display   - Large, clear LCD or LED screen shows pH readings, temperature, and sometimes mV or ion      concentration.   - Some models include a backlit display for better visibility.
       
      1. Electrode System   - Uses a pH-sensitive electrode (usually glass) connected to a reference electrode. Electrodes are often replaceable and require regular calibration and maintenance.
       
      1. Temperature Compensation - Automatic or manual temperature compensation to correct pH readings based on sample temperature.   - Integrated temperature sensors or separate probes are used.
      1. Calibration Functions   - Supports 2-point, 3-point, or multi-point calibration using standard buffer solutions.   - Auto-recognition of calibration buffers in advanced models.
      1. Data Storage and Connectivity   - Internal memory for storing results.   - USB or RS232 ports for data export to PCs or printers; some models support wireless connectivity.
      1. Sturdy Design   - Benchtop models are larger and more stable than portable meters.   - Often come with a durable casing and electrode arm for hands-free operation.
      Applications - Water quality testing (e.g., in wastewater treatment, drinking water monitoring) - Chemical and pharmaceutical industries - Food and beverage production - Biological and environmental research - Educational laboratories A Digital Bench Top pH Meter offers numerous benefits, making it a preferred choice in laboratory and industrial environments where accuracy, reliability, and ease of use are essential. Benefits of a Digital Bench Top pH Meter
      1. High Accuracy and Precision
      - Provides accurate and consistent pH readings, often with ±0.01 pH resolution. - Ideal for scientific and quality control applications where precise pH monitoring is critical.  
      1. User-Friendly Interface- Digital displays (LCD/LED) make readings easy to see and interpret.- Many models offer intuitive controls and guided calibration, simplifying operation.
       
      1. Advanced Calibration Features- Supports multi-point calibration for improved accuracy across a wide pH range.- Some models automatically recognize buffer solutions, reducing user error.
      1. Temperature Compensation- Automatic temperature compensation (ATC) corrects readings based on sample temperature, ensuring accuracy.
      1. Stable and Durable Design- Benchtop units are more robust and stable than handheld devices, reducing the risk of spills or tipping.- Often include electrode holders or arms for secure, hands-free measurements.
      1. Data Management and Connectivity- Built-in memory for storing measurement data.USB, RS232, or wireless connectivity for exporting data to computers or laboratory information systems (LIS).
      1. Multi-Functionality- Some models also measure ORP (oxidation-reduction potential), ion concentration, or conductivity.- Suitable for a variety of testing needs beyond just pH.
      1. Ideal for Long-Term Use- Designed for prolonged and repeated use in laboratory environments.- Replaceable electrodes and parts extend the meter’s usable life.
      1. Compliance and Documentation- Data logging features support documentation and compliance with regulatory standards in regulated industries (e.g., pharma, food, environmental testing).
       
      Add to cart
      Quick view
      Fiber Oil Fast Extractor
      Fiber Oil Fast Extractor

      Fiber Oil Fast Extractor

      $0.00

      Fiber Oil Fast Extractor

      Fiber Oil Fast Extractor

      Fiber Oil Fast Extractor

        A Fiber Oil Fast Extractor is a laboratory instrument designed to determine the oil or finish content in fibers, yarns, or fabrics, particularly wool and synthetic materials. It operates on the principle of solvent extraction followed by evaporation.   Working Principle of Fiber Oil Fast Extractor:
      1. Sample Preparation: Cut the fabric or fiber into small pieces.
      2. Solvent Addition: Place the sample into a metal tube and add an appropriate solvent (e.g., petroleum ether, ethyl ether).
       
      1. Extraction: Apply weight to the sample to facilitate the dissolution of oils into the solvent.
      2. Evaporation: The solvent-oil mixture drips onto a heated plate where the solvent evaporates, leaving behind the oil.
      3. Measurement: Weigh the remaining oil and calculate its percentage relative to the initial sample mass.
        Key Features of Fiber Oil Fast Extractor: - Multiple Workstations: Models like the Quick Extra offer four independent stations for simultaneous testing.- Automatic Weight Pressurization: Eliminates manual pressure application, ensuring consistent results.- Microcomputer Temperature Control: Maintains uniform heating (typically 90°C–120°C) with ±1°C precision.   - Digital Interface: Features timers and oil calculators for efficient operation. - Data Connectivity: Some models can connect to systems like Smart Tex Lab for real-time monitoring and data management.   Applications of Fiber Oil Fast Extractor: - Textile Industry: Assessing oil content in fibers to ensure quality and compliance with standards like GB/T 6504-2017. - Research and Development: Studying the effects of oils and finishes on fiber properties. - Quality Control: Ensuring consistency in fiber treatment processes.   Benefits of Fiber Oil Fast Extractor:
      1. Accurate Oil Content Measurement- Precisely determines oil or finish content in fibers, crucial for quality control.
      2. Rapid Extraction Process - Delivers fast results, improving lab efficiency and productivity.
      3. Simultaneous Multi-Sample Testing - Multiple workstations (e.g., 4 at once) reduce testing time for bulk samples.
       
      1. Improved Product Quality - Helps maintain consistent oil levels, which affect dyeing, processing, and fabric performance.
      2. Automatic Operation - Automated pressing and heating reduce manual effort and operator error.
      3. Digital Monitoring - Built-in timer, temperature control, and oil calculator enhance accuracy and usability.
       
      1. Compliance with Standards - Supports industry methods like GB/T 6504-2017, ensuring reliable and standard-compliant results.
      2. Safe Solvent Handling - Enclosed design minimizes solvent exposure and evaporation loss.
        Features of Fiber Oil Fast Extractor:
      1. Multiple Test Stations - Usually equipped with 2 to 4 independent work units for parallel testing.
      2. Automatic Weight Pressing System - Applies consistent pressure on samples for uniform solvent extraction.
      3. Microcomputer Temperature Control - Maintains precise heating (typically 90–120°C) with ±1°C accuracy.
       
      1. Built-in Timer and Calculator - Allows setting extraction time and calculates oil content directly.
      2. Solvent Evaporation Plate- Heats and evaporates solvent quickly, leaving only the oil residue.
      3. Digital Display - Shows time, temperature, and process status for user-friendly operation.
      4. Compact and Durable Design - Made with corrosion-resistant materials suited for chemical handling.
       
      1. Safety Features - Includes overheat protection and enclosed solvent chamber to reduce exposure risk.
      2. Standard Compliant - Designed to meet GB/T 6504-2017 and similar industry testing standards.
        How to Use Fiber Oil Fast Extractor:
      1. Prepare the Sample - Cut 5–10 g of fiber or yarn into small pieces and place in the sample tube.
      2. Add Solvent - Pour a suitable solvent (e.g., petroleum ether) into the tube to cover the sample.
      3. Apply Weight - Place the extractor's weight or press system onto the sample to aid extraction.
       
      1. Start Extraction - Activate the machine. The solvent dissolves the oils and flows to the heating plate.
      2. Heat for Evaporation - Set the temperature (typically 90–120°C). The solvent evaporates, leaving oil on the plate.
      3. Measure Oil Content- After drying, weigh the remaining oil. Use the built-in calculator or formula:
      Oil % = (Oil weight / Original sample weight) × 100
      1. Clean the Unit - After cooling, clean all parts to prepare for the next test.
        Fiber Oil Fast Extractor

        Fiber Oil Fast Extractor

       
      Add to cart
      Quick view
      Fabric Flame Retardant Tester

      Fabric flame retardant tester

      ,
      $0.00
      Fabric Flame Retardant Tester
      Fabric Flame Retardant Tester

      Fabric Flame Retardant Tester

        A Fabric Flame Retardant Tester is a specialized laboratory instrument designed to evaluate the flammability characteristics of textiles. It assesses how fabrics react to direct flame exposure, measuring parameters such as ignition time, flame spread rate, after-flame duration, and afterglow time. This testing is crucial for ensuring that textiles meet safety standards for various applications, including apparel, home furnishings, and industrial uses.   Purpose and Applications The primary purpose of a Fabric Flame Retardant Tester is to determine the flame resistance of textile materials. This is essential for:- Apparel Safety: Ensuring garments, especially children's sleepwear and industrial work wear, meet flammability standards. - Home Textiles: Testing curtains, drapes, upholstery, and bedding for fire safety compliance. - Technical Textiles: Evaluating materials used in tents, protective clothing, and automotive interiors.   ⚙️ Key Features Modern Fabric Flame Retardant Testers incorporate several features to ensure accurate and reliable testing:- Adjustable Burner Angles: Allowing tests at various orientations (e.g., 0°, 45°, 90°) to simulate different real-world scenarios. Automated Ignition Systems: Providing consistent flame application and reducing operator variability. - Digital Timing Mechanisms: Accurately recording ignition time, flame spread, after-flame, and afterglow durations.   - Transparent Observation Windows: Enabling safe monitoring of the test without exposure to hazards. - Compliance with International Standards: Meeting protocols such as ASTM D6413, ISO 6941, and EN ISO 15025 for standardized testing procedures.   Testing Standards Fabric Flame Retardant Testers are designed to comply with various international standards, including: - ASTM D6413: Standard Test Method for Flame Resistance of Textiles (Vertical Test). - ISO 6941: Textiles — burning behavior — Measurement of flame spread properties of vertically oriented specimens. - EN ISO 15025: Protective clothing — Protection against heat and flame — Method of test for limited flame spread.   ️ How It Works
      1. Sample Preparation: A fabric specimen is cut to specified dimensions and conditioned as per standard requirements.
      2. Mounting: The sample is mounted vertically or at a specified angle in the testing chamber.
      3. Ignition: A controlled flame is applied to the fabric for a predetermined time.
      4. Observation: The tester records ignition time, flame spread, after-flame time, and afterglow time.
      5. Evaluation: Results are compared against standard criteria to determine compliance.
          ✅ Benefits - Safety Assurance: Ensures textiles meet fire safety regulations, reducing risk in end-use applications. - Quality Control: Identifies flammability issues during the manufacturing process. - Regulatory Compliance: Helps manufacturers meet legal requirements for flammability. - Product Development: Assists in developing flame-retardant materials for specialized applications.   For more detailed information on specific models and their features, you can refer to manufacturers like SDL Atlas's Auto Flam Flammability Tester [1], TESTEX's Vertical Flammability Chamber TF312   How to Use a Fabric Flame Retardant Tester (Vertical Flammability Test Method):
      1. Prepare the Sample
      - Cut the fabric to standard dimensions (usually 300 × 75 mm). - Condition the fabric for 24 hours at 21°C and 65% relative humidity.  
      1. Mount the Sample
      - Place the fabric vertically in the frame inside the test chamber. - Ensure it's held securely with no folds or slack.  
      1. Set Up the Burner Position the burner at the required angle (usually 90° for vertical tests).
      - Adjust flame size according to the standard (about 38 mm for ASTM D6413).
      1. Ignite the Flame - Apply the flame to the bottom edge of the fabric for 12 seconds.
       
      1. Observe and Measure - Start timing when flame is applied.
      - Measure: - After-flame time (how long it burns after flame removal) - After-glow time (how long it glows after burning stops) - Char length (distance burned vertically)  
      1. Record the Results
      - Repeat the test on multiple samples (usually 5) and calculate averages.  
      1. Compare with Standards
      - Evaluate whether the results meet the required flame resistance limits.     fabric flame retardant tester IV type (small 450 method) Scope of application It is used for testing the intensity and speed of burning of flammable textile materials after ignition. (specific ignition nozzles and sample holders can be customized to meet multiple criteria). Related standards GB/T14644 ASTM D1230 CFR1610 etc. Technical parameters 1. The spread of time:0 ~ 999.9S resolution 0.1S 2. The temperature inside the box shows:Room temperature -99 degrees C resolution 1 c 3. Igniting time:1S 4. Type of igniter:4 1/2 syringe 5. Sample clip size:Outer frame:204mm * 78mm inner frame:152mm×38mm 6. Distance from the top of the igniter to the sample surface:8mm 7. Studio size and outline size Studio size:370mm×220mm×350mm Outline size:375mm×245mm×478mm 8. Power supply:AC220V 50Hz 20W 9. Weight:18Kg  
      Add to cart
      Quick view