Products
Martindale abrasion tester Updated
VeriVide Original D65 Tube Light
Tensile Strength Tester
Tensile Strength Tester
- Load Cell – Measures the force applied to the sample with high accuracy.
- Grips or Clamps – Hold the test sample firmly to prevent slippage during testing.
- Crosshead (Movable Arm) – Moves at a set speed to apply tension to the material.
- Digital Display or Software Interface – Shows real-time force, elongation, and stress-strain data.
- Multiple Test Modes – Supports tensile, compression, bending, and tearing tests depending on attachments.
- Adjustable Speed and Gauge Length – Customizable test settings to match standards like ASTM, ISO, or BIS.
- Accurate Strength Measurement – Precisely determines a material’s breaking point and load-bearing capacity.
- Quality Control – Ensures materials meet required strength standards before production or release.
- Improves Product Performance – Helps select suitable materials for durability, reducing product failure risks.
- Data for R&D – Provides key mechanical properties like tensile strength, elongation, and modulus for material development.
- Standard Compliance- Supports testing to international standards (e.g., ASTM, ISO), ensuring global quality benchmarks.
- Versatile Testing – Can test textiles, plastics, rubbers, metals, and composites with appropriate grips and settings.
- Increases Efficiency – Speeds up material evaluation with automated testing and data logging.
- Reduces Waste – Detects weak or faulty materials early, cutting down defective production.
- Supports Decision Making – Gives engineers and designers data to choose or improve materials confidently.
- High-Precision Load Cell – Accurately measures force applied to the sample, typically in Newton’s or kilograms.
- Digital Control Interface – Easy-to-use panel or software for setting test parameters and viewing results.
- Adjustable Crosshead Speed – Customizable speed for stretching the sample to match different material standards.
- Interchangeable Grips – Various clamps for fabrics, yarns, plastics, or metals depending on the test material.
- Automatic Data Recording – Captures force, elongation, and break point for analysis and documentation.
- Graph Plotting Capability – Displays real-time stress-strain curves for detailed evaluation.
- Multiple Test Modes – Supports tensile, compression, tear, peel, and bending tests.
- Standard Compliance – Configurable to perform tests according to ASTM, ISO, or BIS standards.
- Safety Features- Includes overload protection and emergency stop for safe operation.
- Robust Frame Design- Rigid construction for stability and accurate testing, even at high loads.
- Prepare the Sample – Cut the material to standard size and shape based on test requirements (e.g., ASTM, ISO).
- Select Appropriate Grips – Choose clamps suitable for the material type (e.g., flat grips for fabric, V-grips for yarn).
- Mount the Sample- Secure both ends of the sample between the upper and lower grips. Make sure it is centered and tight to avoid slippage.
- Set Test Parameters
- Zero the Machine – Calibrate the load cell and crosshead to start from zero force and zero position.
- Start the Test – Press “Start” to begin. The machine will stretch the sample until it breaks, measuring force and elongation.
- Monitor the Test – View live data on force, elongation, and stress-strain curve if available.
- Review and Save Results – After the break, the machine stops. View and save the data (tensile strength, elongation at break, modulus).
- Remove Sample and Clean Up – Dispose of the broken sample and clean grips if needed.
Tensile Strength Tester
burning of flammable textile materials after ignition.
(specific ignition nozzles and sample holders can be customized to meet multiple criteria).
Related standards
GB/T14644 ASTM D1230 CFR1610 etc.
Technical parameters
1. The spread of time:0 ~ 999.9S resolution 0.1S
2. The temperature inside the box shows:Room temperature -99 degrees C resolution 1 c
3. Igniting time:1S
4. Type of igniter:4 1/2 syringe
5. Sample clip size:Outer frame:204mm * 78mm inner frame:152mm×38mm
6. Distance from the top of the igniter to the sample surface:8mm
7. Studio size and outline size
Studio size:370mm×220mm×350mm
Outline size:375mm×245mm×478mm
8. Power supply:AC220V 50Hz 20W
9. Weight:18Kg
It is used to change the color fastness of the textile,
printing and dyeing, printing and other products after a specific track friction.
[Related standards]
GB / T29865 AATCC116 ISO105-X16, etc.
[Instrument characteristics]:
1.Single-chip control, speed can be set freely
2.Imported motor, linear guide, low noise, suitable for long time work
3. Liquid crystal display, film panel
4. Freely set the number of friction, can count up and down,
and automatically stop the alarm when the set value is reached
[Technical Parameters]:
1. Friction head diameter: 16mm 25mm
2. Vertical pressure: 11.1N
3. Working mode: 405 ° clockwise and 405 ° counterclockwise
4. Speed range: constant 60 rpm, LCD display, thin mold panel
5. Counting range: 0-99999 times
6. Power supply: AC 220V 50Hz 80W
7. Weight: 20KG
8. Volume: L420mm × W260mm × H430mm 
Scope of application
It is used for the determination of the tear resistance of various woven
fabrics (Elmendorf method), and it can also be used for the determination
of the tear resistance of thick paper, plastic sheeting, electrical tape, etc.
Related standards
GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734
etc.
Instrument characteristics
1. Maximum 300N test range
2. Microcomputer control, digital decoding, support online
communication
3. Color touch screen control, Chinese and English menu operation
interface
4. Pneumatic clamping, automatic cutting
5. A variety of measurement units (cN, gf) selection
6. Fully automatic operation with safe operation protection.
7. Automatically increase potential energy
[Technical parameter]:
1. Test range: first gear: (0～16)N second gear: (0～32)N third gear: (0～
64)N fourth gear: (0～128)N fifth gear: (0～300)N
2. Test accuracy: ≤±0.2%F·S
3. Tearing length: 43mm (non-standard 30-60mm can be set)
4. Automatic incision length: (20±0.2)mm
5. Sample size: (100×63)mm
6. Specimen clamping: pneumatic way
7. Sample test: Up to 10 sets per group on the device side, and 30 sets
of data can be selected to be saved
8. Power supply: AC220V±10% 50Hz 100W
9. Dimensions: (650×660×680)mm
10. Weight: 50kg
[Sample of control interface]:(English version is also available.) 
[Scope of application]:
It is used to test the fuzzing and pilling
performance of the fabric under the condition of
free rolling and friction in the drum.
[Related standards]:
GB/T4802.4 (Standard Drafting Unit)
ISO12945.3, ASTM D3512, ASTM D1375, DIN 53867, ISO 12945-3, JIS L1076, etc.
[Technical parameter]:
1. Number of boxes: 4
2. Roller specifications: diameter (146±1.0) mm, depth (152.4±1.0) mm;
3. Lining material: polychloroprene lining thickness (3.2±0.4) mm. , Hardness (60～70)
IRHD;
4. Impeller specifications: φ12.7 mm×120.6 mm;
5. Plastic blade specifications: 10 mm×65 mm;
6. Rotation speed: 1～2400 rpm can be set freely
7. Working pressure: 14kPa～21kPa;
8. Time counting: (1～999) min.
9. Power supply: AC220V±10% 50Hz 80W
10. Appearance: (480×400×680)mm
11. Weight: 40kg
[Standard accessories]
Items and specifications Qty. Note
Fuse 2 3A
Main machine 1
Power cable 1
Air tube 1 Φ8mm
Grey cotton sliver 4
Cork lining 4
Rating sample photo 1
White glue 1
