Products
Martindale abrasion tester Updated
VeriVide Original D65 Tube Light
Tensile Strength Tester
Tensile Strength Tester
- Load Cell – Measures the force applied to the sample with high accuracy.
- Grips or Clamps – Hold the test sample firmly to prevent slippage during testing.
- Crosshead (Movable Arm) – Moves at a set speed to apply tension to the material.
- Digital Display or Software Interface – Shows real-time force, elongation, and stress-strain data.
- Multiple Test Modes – Supports tensile, compression, bending, and tearing tests depending on attachments.
- Adjustable Speed and Gauge Length – Customizable test settings to match standards like ASTM, ISO, or BIS.
- Accurate Strength Measurement – Precisely determines a material’s breaking point and load-bearing capacity.
- Quality Control – Ensures materials meet required strength standards before production or release.
- Improves Product Performance – Helps select suitable materials for durability, reducing product failure risks.
- Data for R&D – Provides key mechanical properties like tensile strength, elongation, and modulus for material development.
- Standard Compliance- Supports testing to international standards (e.g., ASTM, ISO), ensuring global quality benchmarks.
- Versatile Testing – Can test textiles, plastics, rubbers, metals, and composites with appropriate grips and settings.
- Increases Efficiency – Speeds up material evaluation with automated testing and data logging.
- Reduces Waste – Detects weak or faulty materials early, cutting down defective production.
- Supports Decision Making – Gives engineers and designers data to choose or improve materials confidently.
- High-Precision Load Cell – Accurately measures force applied to the sample, typically in Newton’s or kilograms.
- Digital Control Interface – Easy-to-use panel or software for setting test parameters and viewing results.
- Adjustable Crosshead Speed – Customizable speed for stretching the sample to match different material standards.
- Interchangeable Grips – Various clamps for fabrics, yarns, plastics, or metals depending on the test material.
- Automatic Data Recording – Captures force, elongation, and break point for analysis and documentation.
- Graph Plotting Capability – Displays real-time stress-strain curves for detailed evaluation.
- Multiple Test Modes – Supports tensile, compression, tear, peel, and bending tests.
- Standard Compliance – Configurable to perform tests according to ASTM, ISO, or BIS standards.
- Safety Features- Includes overload protection and emergency stop for safe operation.
- Robust Frame Design- Rigid construction for stability and accurate testing, even at high loads.
- Prepare the Sample – Cut the material to standard size and shape based on test requirements (e.g., ASTM, ISO).
- Select Appropriate Grips – Choose clamps suitable for the material type (e.g., flat grips for fabric, V-grips for yarn).
- Mount the Sample- Secure both ends of the sample between the upper and lower grips. Make sure it is centered and tight to avoid slippage.
- Set Test Parameters
- Zero the Machine – Calibrate the load cell and crosshead to start from zero force and zero position.
- Start the Test – Press “Start” to begin. The machine will stretch the sample until it breaks, measuring force and elongation.
- Monitor the Test – View live data on force, elongation, and stress-strain curve if available.
- Review and Save Results – After the break, the machine stops. View and save the data (tensile strength, elongation at break, modulus).
- Remove Sample and Clean Up – Dispose of the broken sample and clean grips if needed.
Tensile Strength Tester
burning of flammable textile materials after ignition.
(specific ignition nozzles and sample holders can be customized to meet multiple criteria).
Related standards
GB/T14644 ASTM D1230 CFR1610 etc.
Technical parameters
1. The spread of time:0 ~ 999.9S resolution 0.1S
2. The temperature inside the box shows:Room temperature -99 degrees C resolution 1 c
3. Igniting time:1S
4. Type of igniter:4 1/2 syringe
5. Sample clip size:Outer frame:204mm * 78mm inner frame:152mm×38mm
6. Distance from the top of the igniter to the sample surface:8mm
7. Studio size and outline size
Studio size:370mm×220mm×350mm
Outline size:375mm×245mm×478mm
8. Power supply:AC220V 50Hz 20W
9. Weight:18Kg
Spray Reting Tester
[Scope of application]:
Used for the determination of moisture resistance (wetting grade) of various fabrics
which have been or have not been treated with water resistance or water repellency.
[related standards]:
GB/T4745 ISO4920 AATCC22 JISL1092 etc.
[technical parameters]:
1. Glass funnel:150 x 150 (capacity 500ml)
2. Specimen placement angle:The level is 45 degrees.
3. Distance from nozzle to sample center:150mm
4. Specimen diameter:Ф150mm
5. Size of water receiving pan:500×400×30mm
6. Matching measuring cups:500ml
7, size 500 x 400 x 500mm
8. Instrument weight:5Kg 
