Laboratory Hydro Extractor
Laboratory Hydro Extractor
360 product view
    Click to enlarge
    Laboratory Hydro Extractor
    Laboratory Hydro Extractor
    Laboratory tenter
    Laboratory tenter $0.00
    Back to products
    Laboratory Padder
    Laboratory Padder $0.00

    Laboratory hydro Extractor

    $0.00

    Laboratory Hydro Extractor

    Laboratory Hydro Extractor

    Laboratory Hydro Extractor

     

    A Laboratory Hydro Extractor is a compact, high-speed centrifuge used in textile labs to remove excess water from fabric or yarn samples after dyeing or washing. It works on the principle of centrifugal force, efficiently reducing moisture content before drying.

    Key Features:

    1. Centrifugal Water Extraction – Uses high-speed spinning (typically 1400–2800 RPM) to extract water from textiles.
    2. Stainless Steel Inner Basket – Perforated drum holds fabric/yarn securely and allows water to drain efficiently.

     

    1. Compact Lab Design – Space-saving unit designed specifically for laboratory sample sizes.
    2. Digital Timer and Speed Control – Allows precise setting of spin duration and RPM to match sample needs.
    3. Safety Lock System – Ensures the lid remains closed during operation for user safety.

     

    1. Quick Water Removal – Significantly reduces drying time by extracting up to 90–95% of water content.
    2. Low Noise and Vibration – Balanced design ensures quiet and stable operation.

     

    Applications:

    – Dewatering of dyed or washed fabric/yarn lab samples.

    – Pre-drying step in dyeing and finishing tests.

    – Useful in textile, apparel, and dyeing labs for faster workflow.

     

    Benefits of Laboratory Hydro Extractor:

    1. Efficient Water Removal – Rapidly extracts 90–95% of water from samples, reducing drying time significantly.
    2. Saves Time and Energy – Cuts down the load on dryers and shortens total processing time in lab workflows.
    3. Improves Sample Quality – Gentle spinning preserves fabric structure, avoiding damage or distortion.

     

    1. Precise Control – Adjustable speed and timer ensure optimal settings for different fabric types.
    2. Compact and Lab-Friendly – Small footprint ideal for laboratory use with limited space.
    3. User Safety – Safety lock prevents lid opening during operation, protecting the user.
    4. Cost-Effective – Reduces the need for extended dryer use, saving on electricity and equipment wear.

     

    1. Versatile Use – Suitable for yarn, fabric, and garment samples across various fiber types.

    Features of Laboratory Hydro Extractor:

     

    1. High-Speed Centrifugal Operation – Typically runs at 1400–2800 RPM for quick and efficient water removal.
    2. Stainless Steel Inner Drum – Corrosion-resistant, perforated basket for durability and efficient water drainage.
    3. Digital Timer and Speed Control – Allows precise control of spin duration and speed based on sample type.

     

    1. Compact and Portable Design – Ideal for lab environments with limited space.
    2. Safety Lock Mechanism – Prevents the lid from opening while the machine is in operation.
    3. Shock Absorption System- Reduces vibration and noise for smooth, stable performance.

     

    1. Quick Cycle Times – Short dewatering cycles improve lab throughput and efficiency.
    2. Low Maintenance Design – Simple mechanical setup with easy-to-clean components.
    3. Sample Versatility – Suitable for small fabric swatches, yarns, and small garments.
    4. Energy Efficient – Uses minimal power while delivering high performance.

    How to Use a Laboratory Hydro Extractor:

    1. Prepare the Sample – After dyeing or washing, gently squeeze excess water from the fabric or yarn sample by hand.
    2. Load the Sample – Open the lid and place the sample evenly in the stainless steel drum. – Avoid overloading or uneven placement to maintain balance.

     

    1. Close the Lid securely – Ensure the safety lid is properly closed and locked.
    2. Set the Timer and Speed – Use the control panel to set the spin time (typically 1–5 minutes) and RPM suitable for the sample type.
    3. Start the Machine- Press the start button. The extractor will spin at the selected speed to remove water via centrifugal force.

     

    1. Wait for Spin Completion – The machine will automatically stop after the timer runs out.
    2. Unload the Sample – Once the drum stops completely, open the lid and carefully remove the sample.
    3. Proceed to Drying – The dewatered sample can now be air-dried or placed in a drying oven or stenter.

     

    Safety Tips:

    – Always ensure the lid is closed before starting.

    – Do not open the lid while the drum is spinning.

    – Balance the load to prevent vibration or noise.

     

     

    Laboratory Hydro Extractor dealer In Bangladesh,

    Lab Hydro Extractor Importer in Bangladesh,
    Laboratory Hydro  in Bangladesh,
    Lab Hydro  in Bd,
    Hydro Extractor Price in Bangladesh,
    Laboratory Hydro Extractor in Bangladesh,

     

    Laboratory hydro Extractor
    Small Dehydrator
    Model: DUN-SD185

    Brad: DUNLIN

    Origin: China
    Application scope of small dehydrator:
    This dehydrator is a kind of small sample dehydration
    experimental equipment with micro capacity

    Parameter specification:
    Inner barrel size: 185mm in diameter * 80Hmm
    Outer barrel size: ∮200*125Hmm
    Overall dimension: 290 * 220* 295Hmm
    Power supply: single phase 220 V / 50 Hz power: 60 W speed: 1800 R / min

    Laboratory hydro Extractor Machine Dunlin price in Bangladesh
    Laboratory hydro Extractor Machine Dunlin in textile
    Textile testing equipment in Bangladesh
    Textile testing equipment in Dhaka
    Textile testing equipment in Uttara
    MAAM tex Laboratory hydro Extractor Machine Dunlin price in Bangladesh

    Laboratory hydro Extractor

    Category: Tags: , , , , , , , , , , , , Brand:
    Shipping & Delivery

    Related products

    Controller For IR Dyeing Machine
    Color Matching Cabinet -light Box

    Controller For IR Dyeing Machine

    ,
    $0.00
    Controller For IR Dyeing Machine
    Controller For IR Dyeing Machine

    IR Dyeing machine controller

    Controller For IR Dyeing Machine offers exceptional quality .purchasing of our controller provides cost efficiencies, and customization options enabling you to meet your specific requirements comfortably. Collaborate with program A Controller for IR Dyeing Machine is a specialized control system designed to manage and automate the dyeing process in textile manufacturing, particularly using infrared heating technology. These controllers are crucial for achieving consistent dye quality, reducing energy consumption, and optimizing the dyeing process.   Key Features of an Controller For IR Dyeing Machine :
    1. Temperature Control:- Precisely regulates the infrared heaters to maintain uniform temperature across the dye bath. - Supports customizable heating curves (ramp-up, hold, and cool-down phases).
    2. Programmable Logic Control (PLC): - Allows operators to set and automate dyeing programs for different fabrics and dye types. - Supports multiple recipes or programs for different batches.
     
    1. Real-Time Monitoring and Feedback: - Monitors parameters like temperature, fabric rotation, bath circulation, and timing. - Provides real-time data and alarms for deviations.
    2. Touchscreen Interface / HMI (Human Machine Interface): - User-friendly interface for configuring and monitoring processes. - Multi-language support and graphical display of process curves.
     
    1. Data Logging and Traceability: - Records process data for quality control and traceability.
    2. Energy Efficiency Optimization: - Manages IR heater output to reduce energy usage. - Often includes features for auto shut-off or idle mode.
     
    1. Safety Features: - Includes emergency stop, over-temperature protection, and fault detection systems. 8. Connectivity: - Modern controllers may support Ethernet, Modbus, or other industrial communication protocols for integration into factory automation systems.
      Using A Controller For IR Dyeing Machine provides several benefits, especially in textile manufacturing where precision and efficiency are critical. Here are the key advantages:
    1. Improved Dyeing Accuracy and Consistency
    - Maintains precise temperature control and timing, ensuring uniform dye uptake across the fabric. - Reduces color variation between batches.  
    1. Enhanced Energy Efficiency- Infrared heating is more energy-efficient than traditional heating methods.- The controller optimizes energy use by adjusting the IR output based on process needs, reducing overall energy consumption.
     
    1. Time Savings- Faster heating and cooling cycles due to infrared technology.- Automated processes reduce manual intervention and cycle times. 4. Better Process Control- Programmable dyeing cycles and precise control over each stage (heating, dyeing, rinsing, cooling).- Real-time monitoring and adjustments improve reliability.
     
    1. Reduced Water and Chemical Usage- More efficient dye penetration and fixation mean less water and fewer chemicals are needed for reprocessing or corrections.6. Lower Operational Costs
    - Energy savings, reduced rework, and lower labor input contribute to cost efficiency. - Minimizes fabric damage, reducing material waste.  
    1. Enhanced Safety Built-in alarms, emergency shut-off and automatic fault detection enhance operational safety.8. Data Logging and Traceability- Ability to record and review dyeing process data helps in quality control and troubleshooting.- Facilitates compliance with industry standards and audits.
     
    1. User-Friendly Operation- Modern touchscreen interfaces make it easier for operators to manage and monitor processes.- Multilingual support and visual feedback enhance usability.
     
    Add to cart
    Quick view
    Digital hot plate-magnetic stirrer
    Color Matching Cabinet -light Box

    Digital hot plate-magnetic stirrer

    ,
    $0.00

    Digital hot plate-magnetic stirrer

    Digital hot plate-magnetic stirrer

    Digital hot plate-magnetic stirrer

      A digital hot plate-magnetic stirrer is a laboratory device that combines two essential functions: heating and stirring. It is widely used in chemistry, biology, and physics laboratories for preparing solutions, mixing chemicals, and conducting experiments that require controlled heating and stirring. Model : (DL-300) Brand : DUNLIN Origin : TAIWAN Set-up plate Dimensions : Ø 135 mm Motor type : DC Motor Speed range : 0-1500 rpm Display : 5 Inch LED Display Heating temperature range : Room Temp. 0-280°C Temperature display : 5 Inch LED Display Temperature display accuracy : ±0.1 Protection class according to DIN EN 60529 : IP42 Power Supply : 200-240V 3A Dimensions ( W x D x H ) : ( 255 x 152 x 80 ) mm Key Components of Digital hot plate-magnetic stirrer: Hot Plate (Heating Element): - Provides a flat surface that heats up electrically. - Controlled via a digital interface for setting precise temperatures. - Often features over-temperature protection for safety.
    1. Magnetic Stirrer:
    - Uses a rotating magnetic field to spin a magnetic stir bar placed in the liquid. - Ensures even mixing of the solution without manual stirring. - Speed can be adjusted digitally.  
    1. Digital Display and Controls:
    - Allows precise setting of temperature and stirring speed. - Typically includes an LCD or LED screen. - Some models have programmable settings and timers.  
    1. Temperature Sensors:   - Built-in or external probes (like a PT100 or thermocouple) for accurate temperature control.
      Features of Digital hot plate-magnetic stirrer: - Temperature Range: Usually ranges from ambient to 300°C or higher. - Stirring Speed: Typically ranges from 100 to 1500 RPM. Material: The top plate is often made from ceramic, aluminum, or stainless steel to ensure durability and chemical resistance.   Applications Digital hot plate-magnetic stirrer: - Dissolving solids in liquids. - Heating samples while stirring to ensure uniform temperature distribution. - Conducting chemical reactions that need constant stirring and controlled heat. - Biological and pharmaceutical sample preparation.     Benefits of using a Digital Hot Plate & Magnetic Stirrer in laboratory and industrial settings:
    1. Precision and Control- Digital Interface: Allows accurate setting and monitoring of temperature and stirring speed.- Consistent Results: Ensures reproducibility in experiments and solution preparations.
     
    1. Efficient Mixing and Heating- Uniform Mixing: Magnetic stirring eliminates hotspots and ensures even distribution of solutes.- Simultaneous Operation: Ability to heat and stir at the same time improves efficiency.
     
    1. Safety Features- Overheat Protection: Prevents accidents by automatically shutting off at unsafe temperatures.- Sealed Surface: Reduces risk of contamination and easy to clean.
     
    1. Versatility
    - Suitable for a wide range of applications including chemical synthesis, biological experiments, and pharmaceutical processes.- Compatible with various types of containers and volumes.  
    1. Compact and User-Friendly- Takes up minimal bench space.- Simple to operate with user-friendly controls and displays.
    2. Durability- High-quality materials like ceramic or stainless steel tops resist corrosion and wear.
    3. Time-Saving Speeds up preparation of solutions and reactions compared to manual stirring and separate heating. Would you like these benefits presented in a slide format or for a product brochure?
    Add to cart
    Quick view
    Color Matching Cabinet -light Box

    Color Matching Cabinet-Light Box

    , ,
    $0.00

    Color Matching Cabinet-Light Box

    Color Matching Cabinet-Light Box x

    Color Matching Cabinet-Light Box

    Color Matching Cabinet -light Box A Color Matching Cabinet-Light box (also known as a Light Box) is a standardized visual assessment tool used to evaluate the color consistency of materials like fabric, paint, plastic, paper, and leather under different lighting conditions. Purpose of Color Matching Cabinet-Light Box : To detect color variations and metamerism (color changes under different lights). Ensures accurate color matching across production batches and materials.   How Color Matching Cabinet-Light Box Works: The cabinet is equipped with multiple standardized light sources (e.g., D65, TL84, UV, CWF, A). Samples are placed inside, and their colors are observed under each light to check for consistency.   Common Light Sources of Color Matching Cabinet-Light Box: D65 – Daylight (standard) TL84 – Store lighting (fluorescent) CWF – Cool white fluorescent UV – Ultraviolet (for fluorescent content) A – Incandescent (home light) U30/U35 – Warm white for showroom lighting     Applications of Color Matching Cabinet-Light Box: Textile and garment inspection Paint and coating industry Plastics and packaging Printing and graphic design   Benefits of Color Matching Cabinet-Light Box: Accurate Color Assessment - Ensures color consistency across products by simulating different lighting conditions. Detects Metamerism - Identifies if colors appear differently under various lights, preventing mismatches. Improves Quality Control - Enhances visual inspection processes in textiles, printing, and packaging.   Standardized Viewing Conditions - Provides consistent light sources for reliable and repeatable evaluations. Reduces Rework and Returns - Helps detect color defects early, saving time and production costs. Supports Industry Standards - Meets international color evaluation standards like ASTM D1729, ISO 3664.   Easy to Use of Color Matching Cabinet -Light Box  - Simple controls with clearly labeled light source buttons. Multiple Light Source Options   - Enables testing under conditions matching retail, daylight, home, and UV lighting. Features of Color Matching Cabinet-Light Box: Multiple Standard Light Sources   - Includes D65 (daylight), TL84 (store light), CWF, UV, A (home light), and optional U30/U35. Digital Hour Meter   - Tracks usage time for each light source to schedule timely replacements. Uniform Light Distribution   - Diffused lighting ensures consistent and shadow-free viewing.   Push Button Control Panel- Easy switching between different light sources. No Warm-Up Time - Instant-on lighting allows immediate use. Sturdy Metal Body - Durable and well-coated to reduce light reflection and distortion. Viewing Area Markings - Guides for proper sample placement and comparison. Optional Dimming Function - Adjustable light intensity (in advanced models) for fine-tuned observation.   Standardized Viewing Angles  - Ensures observer views samples under consistent angles for accurate color judgment.   Description of Color Matching Cabinet-Light Box Color Matching TILO 2 Feet 5/6 Option Light Box Cabinet (P60-5/6) TILO 2 Feet 5/6 Option Light Box Cabinet (P60-5/6) is equipped with 5 light sources. The consistency of the light sources in all Tilo Color Assessment Cabinets gives excellent viewing conditions for reliable color critical decisions under consistent lighting. TILO 2 Feet 5 Option Light Box Cabinet (P60-5) can be applied to the industries that need to perform color difference testing as follows: as the premiere designer and manufacturer of color matching instrument products for the Graphic arts, Photographic, Textile, Dyeing, Packaging, Printing, Leather, Inks, Knitwear, Plastic, Automotive and Ceramics industries. TILO 2 Feet 5 Option Light Box Cabinet (P60-5) offers an exact and dependable way to survey colors beneath different lighting conditions. This apparatus is planned to offer assistance experts in the material, paint, and plastic businesses to coordinate and assess colors with exactness. This high-quality item in Bangladesh at the best cost. The color Cabinet box permits for an ideal seeing environment for color inspection. Features of TILO 2 Feet 5 Option Light Box Cabinet (P60-5) Multiple Light Sources of Color Matching Cabinet-Light Box The lTILO 2 Feet 5 Option Light Box Cabinet (P60-5) incorporates a assortment of light sources. These sources can reenact common sunshine, tungsten, and other counterfeit lighting conditions. By changing light sources, clients can compare colors in diverse situations, guaranteeing precise results. Adjustable Light Intensity of Color Matching Cabinet-Light Box The color coordinating light box highlights flexible light concentrated. You can control the brightness to coordinate distinctive real-world conditions. It guarantees a more point by point investigation of how colors alter beneath different lighting intensities. Compact and Solid Design This color appraisal cabinet comes in a compact plan, making it simple to put in any workspace. Its strong structure guarantees long-term utilize, indeed in requesting environments. Precise Color Evaluation The light box gives a controlled environment that makes a difference clients assess colors in a steady way. This highlight is particularly valuable in businesses where correct color coordinating is basic, such as in materials or paints. Energy Efficient The color cabinet is outlined to be energy-efficient. It employments Driven lights that devour less control whereas still advertising dependable and precise color assessment. Simple Client Interface The user-friendly interface of the color coordinating cabinet makes it simple for anybody to work. The controls are straightforward, and clients can alter settings effortlessly. Portable Design The color coordinating light box is lightweight, making it simple to move from one area to another. This movability is particularly valuable when you require to take the cabinet to diverse parts of the generation floor or to different client locations. Ideal for Different Industries Whether you work in materials, car, or fabricating, the color appraisal cabinet offers the exactness and unwavering quality required for color coordinating. It ensures consistency over distinctive materials and generation lines. FEATURES Certified by ASTM D1729, ISO3664, DIN, ANSI and BSI. Automatic changeable into another light source by switching. Usage time display, name of lamp, total number of switches for each. Violated time sensor for tracking lamp service or replacement. Large display & individual switch, easy to operate each light source. No warm-up time, just plug and play. The energy-saving device which generates lower heat & high efficiency. The name of the light source can be changed. SPECIFICATION OF TILO 2 FEET 5 OPTION LIGHT_BOX CABINET (P60-5) Name Details Model P60(5) Brand TILO Origin Hong Kong Dimensions (WxDxH) (710 x 405 x 570)mm Standards ASTM D1729, ISO3664, DIN, ANSI and BSI Light source Five light source. Power Source Electric. Voltage 220 ~ 240V Body Material Fiber-reinforce Warranty One year free service LIGHT SOURCE OF TILO 2 FEET 5 OPTION LIGHT_BOX CABINET (P60-5) Light Source Color viewing applications / Uses of Light Color Temp. (K) Power (W) Brand Info Quantity D65 International standard Artificial Daylight / Natural Daylight 6500 18 PHILIPS; TL-D/18-965 2 Pieces TL84 Applied to stores in Europe, Japan and China 4000 18 PHILIPS; TL-D/18-840 2 Pieces F “Sun-setting Light Yellow” incandescent light source 2700 40 PHILIPS 4 Pieces UV ultraviolet light to detect and evaluate optical brighteners or fluorescent pigments Wave length: 365nm 20 PHILIPS 18W BLB 1 Pieces CWF (Cool White Fluorescent) American Standard 4150 18 PHILIPS; TL-D/18-640 2 Pieces      
    Add to cart
    Quick view
    Digital Yarn Twist Tester
    Digital Yarn Twist Tester

    Digital Yarn Twist Tester

    $0.00

    Digital Yarn Twist Tester

    Digital Yarn Twist Tester

    Digital Yarn Twist Tester

      A Digital Yarn Twist Tester is a laboratory device used to measure the number of twists (turns) per unit length in a yarn. It’s crucial for evaluating yarn quality, strength, elasticity, and uniformity. The digital version offers precise, automated readings for both S-twist and Z-twist yarns.   Purpose Digital Yarn Twist Tester: To determine twist per inch (TPI) or twist per meter (TPM) in single and plied yarns using direct untwist or untwist-retwist methods.   Applications Digital Yarn Twist Tester: Quality control in spinning mills Yarn standard testing (cotton, polyester, blends) R&D in textile manufacturing   Working Principle Digital Yarn Twist Tester: One end of the yarn is clamped, and the other is rotated to remove or measure twists. The tester counts and displays twist digitally based on length and rotation.   Benefits of Digital Yarn Twist Tester: High Accuracy - Digital readout ensures precise twist measurements. Quick Testing - Faster than manual methods, increasing lab efficiency. Versatile Application - Suitable for single, doubled, or plied yarns. Reduces Human Error - Automated counting improves repeatability and consistency.   Supports Both S & Z Twist - Measures both twist directions accurately. User-Friendly Operation - Intuitive controls and clear display simplify use.   Features of Digital Yarn Twist Tester: Digital Display - Shows real-time twist count and length. Motorized Rotation- Smooth, adjustable rotation speed for controlled untwisting. Dual Clamp System - Holds yarn securely to prevent slippage. Length Measurement Scale - Built-in ruler or encoder for precise yarn length setup.   Auto Stop Function - Automatically stops when yarn is fully untwisted. Selectable Units - Twist readings available in TPI or TPM.   How to Use Digital Yarn Twist Tester: Prepare the Yarn Sample - Cut a yarn length (e.g., 250 mm or 10 inches) as per testing standard. - Make sure it’s free from knots or damage. Mount the Yarn   - Fix one end in the stationary clamp and the other in the rotating clamp. - Ensure the yarn is straight and under slight tension.   Set the Gauge Length - Adjust the length scale or input it digitally, depending on the machine. Select Twist Direction - Choose S or Z direction based on the yarn's twist. Start the Test - Activate the motor to untwist (or untwist-retwist, if applicable).   - The display shows the number of rotations. Read the Twist Value  - The twist (TPI/TPM) appears automatically based on the set length.   Stop and Unload - Once reading is complete, stop the machine and remove the yarn. Record the Result - Note the reading for documentation or further analysis.   Maintenance Tips for Digital Yarn Twist Tester: Daily: ☐ Wipe down the machine and clamps to remove dust or fibers ☐ Check for yarn residue on rotating parts ☐ Ensure display and buttons are responsive   Weekly: ☐ Lubricate rotating spindle lightly (if required) ☐ Inspect clamps for wear or misalignment ☐ Test motor rotation for smooth operation ☐ Check twist direction selector switch   Monthly: ☐ Calibrate digital display if twist readings drift ☐ Inspect electrical wiring and connectors ☐ Tighten any loose screws or panel parts     Safety Tips: Avoid Loose Clothing: Prevent getting caught in the rotating spindle Use Proper Yarn Tension: Overstretching may snap the yarn or damage clamps Handle With Care: Avoid rough handling of the digital panel or twist arm Power Off When Not in Use: Prevents accidental operation Follow Manual: Refer to user guide for specific calibration or cleaning procedures   Digital Yarn Twist Tester – Maintenance & Safety Checklist   Daily Maintenance: ☐ Clean clamps and body surface ☐ Remove lint or yarn fragments ☐ Verify display & control buttons function properly   Weekly Maintenance: ☐ Lightly lubricate spindle if required ☐ Inspect clamp alignment and grip ☐ Test motor for smooth, silent operation ☐ Check twist direction switch   Monthly Maintenance: ☐ Calibrate twist reading accuracy ☐ Inspect cables and connectors ☐ Tighten loose hardware ☐ Run full test to ensure system performance   Safety Checklist: ☐ Keep hands clear of rotating parts during testing ☐ Avoid loose clothing or jewelry ☐ Do not overstretch or over tension yarn ☐ Power off when cleaning or not in use ☐ Follow the machine's manual for calibration and service   Basic Troubleshooting Guide – Digital Yarn Twist Tester   Issue: No Power / Display Not Turning On -  Check power cable and socket -  Inspect fuse or main switch -  Ensure emergency stop isn’t engaged   Issue: Twist Count Seems Inaccurate -  Recalibrate the machine -  Verify yarn length input is correct -  Check for slippage in clamps   Issue: Motor Not Rotating -  Ensure motor switch is ON -  Inspect motor connection and wiring -  Test rotation manually to check for blockage   Issue: Display Freezes or Buttons Unresponsive -  Restart the machine -  Check control panel for dust or moisture -  Contact support if issue persists   Issue: Auto-Stop Not Working -  Ensure length and twist direction are set -  Check sensor alignment or damage -  Reboot and re-run test   Scope of application It is used for testing the twist, twist irregularity and twist shrinkage of all kinds of yarns. [Related standards] GB/T2543.1/2 FZ/T10001 ISO2061 ASTM D1422 JIS L1095 etc.   Technical parameters 1. Work mode:Computer program control, data processing, printout results 2. Test methods: A, Average twisting slip elongation B, Average maximum twisting elongation. C, Direct counting method D, twisting twisting A method E, Twisting twisting B method f and three times twisting twisting method 3. Sample length:10、25、50、100、200、250、500mm 4. Twist test range:1~1998 twist /10cm, 1~1998 twist /m 5. The extent of twist removal:Maximum 50mm 6. Maximum twist measurement.20mm 7. Speed:600～3000r/min 8. Pre tension:0.5～171.5cN
    Digital Yarn Twist Tester

    Digital Yarn Twist Tester

    9. Size:920×170×220mm 10. Power supply:Ac220V 50Hz 25W 11. Weight:16kg
    Add to cart
    Quick view
    Pantone Book

    Pantone book

    ,
    $0.00

    Pantone Book

    Pantone Book

    Pantone Book

      A Pantone Book, commonly referred to as a Pantone Color Guide, is a professional color matching tool used across industries like graphic design, fashion, printing, packaging, and product manufacturing. It helps ensure consistent color communication from design to final production.   What It Does? - Displays standardized Pantone colors in fan-deck or chip book format. - Provides color codes, ink formulas, and finish types for accurate color replication.     Types of Pantone Books:
    1. Formula Guide (Solid Coated & Uncoated) – For spot color printing.
    2. Color Bridge – Shows Pantone spot colors alongside CMYK equivalents.
    3. Pantone Fashion, Home + Interiors (FHI) – For textiles, soft goods, and home decor.
    4. Pantone CMYK and Pastels & Neons Guides – For process printing and special effect colors.
      ⚙️ Features of Pantone Book: - Thousands of pre-defined colors. - Ink mixing formulas (for printers). - Available in coated, uncoated, and matte finishes. - Some include digital tools or access to Pantone Connect software.   ✅ Benefits of Pantone Book: - Ensures accurate color matching across designers, clients, and manufacturers. - Supports branding consistency across all printed and physical materials.   key benefits of using a Pantone Book: ✅ 1. Accurate Color Communication- Ensures consistent color matching between designers, printers, and manufacturers—globally. ✅ 2. Industry Standard- Trusted across printing, fashion, packaging, and branding for reliable color references.   ✅ 3. Saves Time and Reduces Errors - Eliminates guesswork in color approval, helping avoid costly reprints or corrections. ✅ 4. Versatile Applications - Supports multiple media types: print, fabric, plastics, digital design, etc. ✅ 5. Real-World Color View - Physical swatches show true ink or dye appearance, which digital screens can’t replicate accurately.   ✅ 6. Ink Mixing Formulas - Provides exact mixing guides for printers to replicate spot colors precisely. ✅ 7. Global Consistency - Helps maintain brand color consistency across international production sites.   key features of a Pantone Book: 1. Standardized Color System - Includes thousands of pre-defined Pantone Matching System (PMS) colors with unique codes. 2. Multiple Finish Types - Available in Coated (C), Uncoated (U), Matte (M) formats to match different printing surfaces.   3. Fan Deck or Chip Format - Comes in portable fan-deck or tear-away chip books for easy reference and sharing. 4. Ink Mixing Formulas - Provides precise ink formulas for each color, ideal for print production. 5. Specialized Editions - Guides tailored for graphic design, textiles (FHI), plastics, and digital design.   6. Cross-Media Consistency - Ensures uniform color across print, web, fabric, and packaging. 7. Digital Integration - Many books include access to Pantone Connect for digital workflow and color data sync.   Here’s a simple guide on how to use a Pantone Book effectively: ✅ 1. Choose the Right Pantone Book - Use Formula Guide for print. - Use FHI (Fashion, Home + Interiors) for textiles. - Use Color Bridge to compare spot colors with CMYK.   ✅ 2. Select the Color - Flip through the fan deck or chip book to find the desired color. - Note the Pantone code (e.g., Pantone 186 C for coated paper). ✅ 3. Communicate the Code - Share the Pantone number with printers, manufacturers, or team members to ensure consistent color use.   ✅ 4. Use the Right Finish - Make sure you're referencing coated, uncoated, or matte depending on your final material. ✅ 5. Compare to Printed Proofs - Use the physical Pantone swatch to check if print proofs or samples match. ✅ 6. Maintain Lighting Consistency - View colors under standard lighting (D50) for accurate color judgment.   ✅ 7. Store Properly - Keep the Pantone book in a cool, dry place and replace it every 12–18 months to avoid fading.   Pantone offers a diverse range of color guides tailored to various industries and applications. Here's an overview of the main Pantone book models:     Pantone Graphics & Print Guides  
    1. Formula Guide (Solid Coated & Uncoated)
    - Features over 2,390 spot colors with corresponding ink formulations. - Essential for branding, packaging, and print design. - Provides accurate color matching for solid colors.  
    1. Color Bridge Guide (Coated & Uncoated)
    - Displays side-by-side comparisons of Pantone spot colors and their closest CMYK equivalents. - Includes CMYK, RGB, and HEX values for digital and print consistency. - Ideal for projects requiring color translation across different media.  
    1. CMYK Guide (Coated & Uncoated)
    - Contains a comprehensive range of CMYK colors. - Useful for four-color process printing without spot colors. - Helps in selecting colors achievable through standard CMYK printing.  
    1. Pastels & Neons Guide
    - Offers a collection of soft pastel and vibrant neon colors. - Suitable for creative projects in fashion, print, and packaging. - Provides unique color options for special design applications.  
    1. Metallics Guide
    - Features metallic spot colors for premium print finishes. Ideal for luxury packaging, branding, and high-end print materials. - Adds a sophisticated touch to printed designs.   Pantone Fashion, Home + Interiors (FHI) Guides
    1. FHI Color Guide (TPG – Paper)
    - Contains a wide range of colors for non-fabric materials. - Used in product design, cosmetics, and interiors. - Provides color inspiration for various applications.  
    1. FHI Cotton Passport & Cotton Planner (TCX – Textile)
    - Offers colors on cotton fabric swatches. - Essential for textile and apparel design. - Ensures accurate color communication in fabric production.  
    1. FHI Polyester Swatch Book
    - Includes colors on polyester fabric. - Useful for sportswear, footwear, and synthetic textiles. - Provides color options specific to polyester materials.   Pantone Specialty Guides  
    1. Pantone SkinTone Guide
    - Features a range of skin tone colors. - Used in cosmetics, healthcare, and product development. - Aids in creating products that match diverse skin tones.  
    1. Pantone Plastic Standard Chips
    - Provides color references on plastic substrates. - Essential for industrial design, consumer electronics, and appliances. - Ensures color accuracy in plastic product manufacturing.   Pantone Bundles & Studio Sets   - Portable Guide Studio - A comprehensive set including multiple Pantone guides. - Designed for professionals needing a wide range of color references. - Convenient for on-the-go color selection and matching.   - Essentials Set - Combines key Pantone guides into one package. - Ideal for designers seeking a versatile color toolkit. - Offers a cost-effective solution for comprehensive color needs.   Each Pantone guide serves specific purposes across different industries. Selecting the appropriate guide depends on your project's requirements and the materials involved.
    Pantone Book

    Pantone Book

     
    Add to cart
    Quick view
    Laboratory Mini Stenter Dryer

    Laboratory mini stenter Dryer

    ,
    $0.00
    Laboratory mini stenter Dryer
    Laboratory Mini Stenter Dryer

    Automatic fixing Dryer

      A Laboratory Mini Stenter Dryer is a compact, lab-scale machine designed to simulate the drying and heat-setting processes used in textile finishing. It mimics the function of industrial stenter machines but on a much smaller scale, making it ideal for testing fabric behavior, shrinkage, and finish quality under controlled conditions. Key Features:
    1. Controlled Heating System
    - Typically uses electric heating with adjustable temperature (up to 220–250°C). - Ensures uniform and precise temperature control.
    1. Adjustable Fabric Width
    - Equipped with clips or pins to hold and stretch fabric width-wise, simulating stenter frame action.  
    1. Variable Speed Conveyor - Allows control over fabric dwell time for drying or heat-setting.
    2. Compact and Bench-Top Design - Space-saving design ideal for textile labs and R&D units.
    3. Digital Controls - Easy-to-use digital interface for setting temperature, conveyor speed, and process time.
    1. Transparent Viewing Window - Allows operators to monitor fabric movement and drying visually.
    2. Low Energy Consumption - Designed for lab use, consuming less power than industrial models.
    Applications: - Heat-setting of synthetic fabrics.   Drying and curing of samples post-dyeing or printing. - Evaluating fabric shrinkage, dimensional stability, and finish behavior. - Testing chemicals and auxiliaries used in textile finishing.   Benefits of Laboratory Mini Stenter Dryer:
    1. Accurate Simulation of Production - Mimics industrial stenter conditions on a lab scale, ideal for pre-production testing and R&D.
    2. Cost-Effective Testing - Enables testing and fabric finishing without the high cost or space requirements of full-scale machines.
     
    1. Energy Efficient - Consumes less power compared to large stenters, making it economical for small-scale or frequent use.
    2. Precise Control - Offers accurate control of temperature, speed, and fabric tension, ensuring consistent results.
     
    1. Space-Saving Design - Compact and bench-top friendly, perfect for laboratories with limited space.
    2. Multiple Applications - Useful for drying, heat-setting, shrinkage testing, and evaluating chemical finishes.
     
    1. Faster Development Cycles - Speeds up new product development by allowing rapid sample testing and adjustments.
    2. Improved Fabric Quality - Helps optimize finishing parameters for better dimensional stability, hand feel, and appearance.
    3. Safe and User-Friendly- Designed with lab safety in mind, including temperature safety controls and easy operation.
      Features of Laboratory Mini Stenter Dryer:
    1. Compact Bench-Top Design - Ideal for laboratory use with limited space requirements.
    2. Adjustable Temperature Control - Precise heating (usually up to 220–250°C) with digital controllers for accurate processing.
     
    1. Variable Conveyor Speed- Allows adjustment of fabric dwell time for different drying or heat-setting needs.
    2. Width Adjustment Mechanism - Equipped with clips or pins to stretch and fix fabric width-wise, simulating industrial stenter conditions.
     
    1. Transparent Viewing Window - Enables visual monitoring of fabric movement and drying inside the chamber.
    2. Digital Display Panel- Easy-to-use interface for setting and monitoring temperature, speed, and time.
    3. Stainless Steel Construction- Durable and corrosion-resistant for long-term use at high temperatures.
     
    1. Uniform Heat Distribution- Ensures consistent fabric treatment across the width.
    2. Safety Features- Over-temperature protection and insulated body for operator safety.
    3. Versatile Applications - Suitable for drying, heat-setting, shrinkage testing, and chemical finish evaluations.
      Laboratory Mini Stenter Dryer dealer In Bangladesh, Lab Mini Stenter Dryer Importer in Bangladesh, Mini Stenter Dryer in Bangladesh, Laboratory Stenter Dryer in Bd, Lab Stenter Dryer In Uttara, Lab Stenter Price in Bangladesh, Laboratory Stenter Dryer in Bangladesh, Laboratory Mini Dryer in Bangladesh,   Automatic fixing dryer Application: used for simulating the production onsite to produce the textile that meets customer requirement, including the time、temperature、resin auxiliary agent formula, elongation of the same textile, and it is also can provide basis manufacture and to ensure the correctness of mass production. Basic design as Automatic Fixing Dryer,also connect external steam for printing sample steaming. Owing the wide adjusting ranges regarding temperature, humidity, dwelling time, this apparatus can be used for : a) Electric heating for drying, curing and thermofixation, room temp.~230℃. b) Steaming with saturated steam 102±2℃ c) Electric heating and steam together for HT steaming between 102±230℃ Textile Testing Instruments Automatic Fixing Dryer  dealer In Bangladesh, Automatic Fixing Dryer Importer in Bangladesh, Automatic Fixing Dryer in Bangladesh, Automatic Fixing Dryer  in Bd, Automatic Fixing Dryer  In Uttara, Automatic Fixing Dryer  Price in Bangladesh, Automatic Fixing Dryer  Supplier in Bangladesh, Lab Dryer Machine in Bangladesh, Rapid Dryer Mini Stanter in Bangladesh
    Add to cart
    Quick view
    Rainin Digital Pipette
    Rainin Digital Pipette

    Rainin Digital Pipette

    ,
    $0.00

     Rainin Digital Pipette

    Rainin Digital Pipette

    Digital Pipette

      Rainin Digital Pipette E4-XLS Electronic Pipette,   The Rainin Digital Pipette is a high-precision liquid handling instrument used in laboratories for accurate and reproducible measurement and transfer of small liquid volumes. Manufactured by Rainin Instruments (a Mettler Toledo company), these pipettes are known for their ergonomic design, reliability, and advanced digital controls.   Features of Rainin Digital Pipette:
    1. Digital Volume Setting
    - Allows for precise and repeatable volume adjustments via a digital display or dial. - Reduces user error compared to manual pipettes.
    1. High Accuracy and Precision
    - Offers minimal variability in volume delivery, making it ideal for sensitive assays and experiments.  
    1. Ergonomic Design
    - Lightweight and comfortable to use over long periods, reducing hand strain (good for repetitive tasks). - Often features a finger hook and low pipetting force.
    1. Easy Calibration and Maintenance
    - Includes software or manual options for calibration. - Designed for easy disassembly and cleaning.
    1. Durable and Chemically Resistant - Built with high-quality materials that resist damage from chemicals and frequent use.
    2. Models and Volume Ranges - Available in single-channel and multi-channel versions.
    Covers a wide volume range from 0.1 µL to 10 mL depending on the model.  
    1. LTS (LiteTouch System) - Many Rainin pipettes use the LTS tip system which reduces tip ejection force and ensures a consistent seal.
    2. Compliance and Traceability - Some digital models offer data storage or integration with lab information systems for traceability.
    Applications - Molecular biology - Microbiology - Clinical diagnostics - Pharmaceutical and chemical research   Benefits of Rainin Digital Pipette:
    1. High Accuracy and Precision - Ensures reliable and reproducible results, essential for sensitive experiments.
    2. Digital Volume Control - Reduces human error with easy and precise volume setting via digital interface.
     
    1. Ergonomic Design- Minimizes hand strain and fatigue during prolonged use; ideal for repetitive pipetting tasks.
    2. LiteTouch System (LTS) - Eases tip attachment and ejection, reducing risk of RSI (Repetitive Strain Injury) and improving comfort.
     
    1. Versatile Volume Range - Available in multiple models to handle volumes from microliters to milliliters.
    2. Durable and Reliable - Built with high-quality materials for long life and resistance to chemicals and frequent use.
     
    1. Easy Maintenance and Calibration - Simplified calibration and cleaning ensure long-term performance and compliance.
    2. Data Integrity and Traceability -Some models store data, supporting audit trails and regulatory compliance.
    3. Enhanced Productivity - Quick setup, easy operation, and consistent performance speed up lab workflows.
      Features of Rainin Digital Pipette:
    1. Digital Volume Adjustment - Precise and easy-to-read digital display for accurate volume setting.
    2. High Precision and Accuracy- Delivers consistent results, meeting ISO and GLP/GMP standards.
    3. Ergonomic Design- Lightweight, balanced with low plunger and tip ejection force to reduce fatigue.
     
    1. LiteTouch Tip Ejection System (LTS) - Reduces tip attachment/ejection force, improving comfort and consistency.
    2. Durable Construction - Built with high-quality, chemically resistant materials for long-term use.
    3. Wide Volume Range - Available in multiple models from 0.1 µL to 10 mL.
    4. Single-Channel and Multi-Channel Options - Suitable for various applications including high-throughput assays.
    5. Autoclavable Components- Some parts can be autoclaved for sterilization and contamination control.
     
    1. Easy Calibration and Maintenance - User-friendly calibration settings with accessible parts for cleaning.
    2. Optional Electronic Models - Some versions include programmable features, multiple modes (e.g., reverse pipetting), and memory storage.
    Rainin Digital Pipette dealer In Bangladesh, Digital Pipette Importer in Bangladesh, Digital Pipette in Bangladesh, Digital Pipette Machine in Bd, Digital Pipette In Uttara, Digital Pipette Price in Bangladesh, Digital Pipette Supplier in Bangladesh, Digital Pipette in Bangladesh,  
    Add to cart
    Quick view
    Pneumatic bursting tester

    Bursting strength tester

    ,
    $0.00
    Bursting strength tester

    Pneumatic bursting strength tester

    true burst

    Pneumatic bursting tester China national patent：ZL201210486480.8 ZL201220628425.3 Pneumatic bursting strength tester China national patent：ZL201210486480.8 ZL201220628425.3 [Scope of application]: It is used to measure the burst strength and burst expansion degree of various fabrics, including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other fabrics made by other processes, under standard conditions or wet conditions. This method is employed to assess the burst strength and degree of burst expansion of various types of fabrics, such as knitted, woven, non-woven, laminated, and others produced through different processes, under both standard and wet conditions. This technique is utilized to evaluate the burst strength and extent of burst expansion in various fabric types, including knitted, woven, non-woven, laminated, and others produced through diverse manufacturing processes, under both standard and wet conditions. Benefits of Bursting strength tester: Fast testing cycle for fast feedback to the production • Auto-start, a photocell detects the presence of a sample and automatically initiates a measurement sequence, thus allowing hands-free operation • Auto-cycling function permits the continuous cycling of the upper pressure foot to facilitate representative and continuous measurements
    • Available with automatic test strip feeder Measurements are simple to make with the Mullen type Bursting Strength Tester. Fast automatic measurements Measurement starts automatically once a test piece has been placed in the measuring gap. The clamping foot descends, and a bursting strength measurement is made.
    The sample is then quickly released and is ready for the next measurement at a new position. To maximize the sample measurement rate, the tester uses a minimum of time between the bursts, so that a series of 10 measurements can be done in less than 45 seconds. The actual measuring time depends of course on the type of paper or paper board being tested. Three Different test results can be reported after a single measurement; bursting strength standard, bursting strength compensated, and bursting energy absorption (BEA).Bursting strength tester can be compensated for the stiffness of the diaphragm For low bursting strength levels, the stiffness of the diaphragm can account for a large portion of the bursting strength value. If desired, the device can also measure, calculate, and report effective bursting strength compensated from the effects of the diaphragm. Measurement of Bursting Energy Absorption (BEA) is used to determine the energy absorption capability of a material. Strong, flexible paper has higher energy absorption values, while brittle, stiff paper has lower values. Bursting Strength Tester calculates and reports BEA according to the SCAN P 24 standard Related standards of Bursting strength tester: GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc. [Instrument characteristics]: 1. Microcomputer control, automatic burst test, automatic correction, automatic data processing, and output results in the form of experimental report. 2. Aerodynamics, high cleanliness. 3. Color touch screen interface, Chinese and English menu operation, support online communication.
    1. Bursting pressure can reach up to 1.2MPa 5. The maximum burst and expansion degree can reach 70mm. 6. Strengthen the lighting system on the test surface. 7. The main aerodynamic force helps to clamp the sample system. 8. A variety of test areas are available, and the switching is easy.
    2. A variety of unit conversions between Chinese and English. 10. Reliable anti-pinch safety protection design. [Technical parameter]: 1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized) 2. The minimum graduation value: 0.0001Mpa 3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree pressurization.
    4. Test accuracy: ≤±0.2%F·S 5. Thickness of elastic diaphragm: ≤2mm 6. Testing area: cm²） 100 50 10 7.3 Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5 7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min 8. Safety cover: high-transparent plexiglass 9. Power supply: AC220V±10% 50Hz 800W 10. Dimensions: (470×490×780)mm (host L×W×H)
    Add to cart
    Quick view