Spray Rating Tester
Spray Rating Tester
360 product view
    Click to enlarge
    Spray Rating Tester
    Spray Rating Tester
    Xenon Arc Light Fastness Tester
    Xenon Arc Light Fastness Tester $0.00
    Back to products
    Martindale abrasion tester updated
    Martindale abrasion tester Updated $0.00

    Spray Rating Tester

    $0.00

    Spray Rating Tester

    Spray Rating Tester

    Spray Rating Tester

     

    The Spray Rating Tester is a textile testing instrument used to evaluate the water resistance or water repellency of fabric surfaces. It measures how well a fabric can resist wetting when exposed to a controlled spray of water, helping assess its performance in rain or damp conditions.

     

    Purpose of Spray Rating Tester

    – To assess surface wetting resistance of textiles.

    – Commonly used for outdoor clothing, rainwear, tents, and performance fabrics.

     

    Working Principle of Spray Rating Tester

    – A fabric specimen is mounted at a 45° angle.

    – Water is sprayed from a standard nozzle for a specific time.

    – After spraying, the fabric is visually rated based on the appearance of water drops and wetting.

     

    Key Components of Spray Rating Tester

    – Spray Nozzle: Delivers a consistent, standard water spray.

    – Funnel & Reservoir: Controls the flow and volume of water.

    – Specimen Holder: Positions the fabric at a 45° angle.

    – Spray Stand: Ensures accurate nozzle height and positioning.

     

    Standards Used of Spray Rating Tester

    – AATCC 22

    – ISO 4920

    – BS EN 24920

     

    Applications of Spray Rating Tester

    – Rainwear and water-resistant textiles.

    – Quality control in fabric finishing.

    – R&D for performance apparel.

     

    Benefits of Spray Rating Tester:

    1. Quick and Simple Evaluation – Offers a fast way to assess fabric water repellency without complex setup.
    2. Standardized Testing- Complies with AATCC 22 and ISO 4920, ensuring globally accepted results.
    3. Cost-Effective- Low maintenance and no power requirement make it economical for routine lab use.

     

    1. Improves Fabric Performance – Helps manufacturers develop or improve water-resistant textiles.
    2. Non-Destructive Test – Does not damage the fabric, allowing for additional tests on the same sample.
    3. Visual Grading- Easy to interpret using a standard spray rating chart (0 to 100 scale).
    4. Supports Quality Control – Detects finish degradation or variation in water-repellent treatments.
    5. Portable and Compact- Lightweight design allows easy use in various lab or field settings.

     

    Features of Spray Rating Tester:

    1. Standardized Spray Nozzle – Delivers consistent water spray per AATCC and ISO specifications.
    2. 45° Specimen Mounting Angle – Ensures uniform test setup for accurate and repeatable results.
    3. Stainless Steel or Aluminum Frame – Corrosion-resistant and durable for long-term use with water exposure.

     

    1. Water Reservoir and Funnel System – Provides precise water volume (usually 250 ml) for each test.
    2. Graduated Spray Stand- Fixed height (150 mm above specimen) for controlled spray impact.
    3. Detachable Specimen Holder- Easy loading and removal of fabric samples.
    4. Compact and Lightweight Design – Portable and convenient for both lab and field testing.
    5. No Electricity Required – Fully manual operation increases reliability and reduces operating costs.

     

    How to Use Spray Rating Tester:

    1. Prepare the Sample – Cut fabric to standard size (usually 180 × 180 mm). – Condition the sample if required (21°C, 65% RH for 24 hours).
    2. Mount the Fabric – Place the fabric on the specimen holder at a 45° angle.
    3. Fill the Reservoir – Pour 250 ml of distilled water into the upper funnel.

     

    1. Start the Test – Release the water through the nozzle; it sprays over the fabric for about 25–30 seconds.
    2. Inspect the Fabric – After spraying, visually assess the water beading or penetration on the surface.
    3. Rate the Sample – Compare the fabric’s wetting pattern with the standard spray rating chart: – 100 = No sticking/wetting – 90–50 = Partial wetting – 0 = Complete wetting
    4. Record the Rating – Document the spray rating for quality control or reporting.

     

    Spray Rating Tester,
    Water Repellency Tester
    Spray Reting Tester

    [Scope of application]:
    Used for the determination of moisture resistance (wetting grade) of various fabrics
    which have been or have not been treated with water resistance or water repellency.
    [related standards]:
    GB/T4745 ISO4920 AATCC22 JISL1092 etc.
    [technical parameters]:
    1. Glass funnel:150 x 150 (capacity 500ml)
    2. Specimen placement angle:The level is 45 degrees.
    3. Distance from nozzle to sample center:150mm
    4. Specimen diameter:Ф150mm
    5. Size of water receiving pan:500×400×30mm
    6. Matching measuring cups:500ml
    7, size 500 x 400 x 500mm
    8. Instrument weight:5Kg

    Category: Tags: , , , , Brand: ,
    Description

    Spray Rating Tester

    Spray Rating Tester

    Spray Rating Tester

     

    The Spray Rating Tester is a textile testing instrument used to evaluate the water resistance or water repellency of fabric surfaces. It measures how well a fabric can resist wetting when exposed to a controlled spray of water, helping assess its performance in rain or damp conditions.

     

    Purpose of Spray Rating Tester

    – To assess surface wetting resistance of textiles.

    – Commonly used for outdoor clothing, rainwear, tents, and performance fabrics.

     

    Working Principle of Spray Rating Tester

    – A fabric specimen is mounted at a 45° angle.

    – Water is sprayed from a standard nozzle for a specific time.

    – After spraying, the fabric is visually rated based on the appearance of water drops and wetting.

     

    Key Components of Spray Rating Tester

    – Spray Nozzle: Delivers a consistent, standard water spray.

    – Funnel & Reservoir: Controls the flow and volume of water.

    – Specimen Holder: Positions the fabric at a 45° angle.

    – Spray Stand: Ensures accurate nozzle height and positioning.

     

    Standards Used of Spray Rating Tester

    – AATCC 22

    – ISO 4920

    – BS EN 24920

     

    Applications of Spray Rating Tester

    – Rainwear and water-resistant textiles.

    – Quality control in fabric finishing.

    – R&D for performance apparel.

     

    Benefits of Spray Rating Tester:

    1. Quick and Simple Evaluation – Offers a fast way to assess fabric water repellency without complex setup.
    2. Standardized Testing- Complies with AATCC 22 and ISO 4920, ensuring globally accepted results.
    3. Cost-Effective- Low maintenance and no power requirement make it economical for routine lab use.

     

    1. Improves Fabric Performance – Helps manufacturers develop or improve water-resistant textiles.
    2. Non-Destructive Test – Does not damage the fabric, allowing for additional tests on the same sample.
    3. Visual Grading- Easy to interpret using a standard spray rating chart (0 to 100 scale).
    4. Supports Quality Control – Detects finish degradation or variation in water-repellent treatments.
    5. Portable and Compact- Lightweight design allows easy use in various lab or field settings.

     

    Features of Spray Rating Tester:

    1. Standardized Spray Nozzle – Delivers consistent water spray per AATCC and ISO specifications.
    2. 45° Specimen Mounting Angle – Ensures uniform test setup for accurate and repeatable results.
    3. Stainless Steel or Aluminum Frame – Corrosion-resistant and durable for long-term use with water exposure.

     

    1. Water Reservoir and Funnel System – Provides precise water volume (usually 250 ml) for each test.
    2. Graduated Spray Stand- Fixed height (150 mm above specimen) for controlled spray impact.
    3. Detachable Specimen Holder- Easy loading and removal of fabric samples.
    4. Compact and Lightweight Design – Portable and convenient for both lab and field testing.
    5. No Electricity Required – Fully manual operation increases reliability and reduces operating costs.

     

    How to Use Spray Rating Tester:

    1. Prepare the Sample – Cut fabric to standard size (usually 180 × 180 mm). – Condition the sample if required (21°C, 65% RH for 24 hours).
    2. Mount the Fabric – Place the fabric on the specimen holder at a 45° angle.
    3. Fill the Reservoir – Pour 250 ml of distilled water into the upper funnel.

     

    1. Start the Test – Release the water through the nozzle; it sprays over the fabric for about 25–30 seconds.
    2. Inspect the Fabric – After spraying, visually assess the water beading or penetration on the surface.
    3. Rate the Sample – Compare the fabric’s wetting pattern with the standard spray rating chart: – 100 = No sticking/wetting – 90–50 = Partial wetting – 0 = Complete wetting
    4. Record the Rating – Document the spray rating for quality control or reporting.

     

    Spray Rating Tester,
    Water Repellency Tester
    Spray Reting Tester

    [Scope of application]:
    Used for the determination of moisture resistance (wetting grade) of various fabrics
    which have been or have not been treated with water resistance or water repellency.
    [related standards]:
    GB/T4745 ISO4920 AATCC22 JISL1092 etc.
    [technical parameters]:
    1. Glass funnel:150 x 150 (capacity 500ml)
    2. Specimen placement angle:The level is 45 degrees.
    3. Distance from nozzle to sample center:150mm
    4. Specimen diameter:Ф150mm
    5. Size of water receiving pan:500×400×30mm
    6. Matching measuring cups:500ml
    7, size 500 x 400 x 500mm
    8. Instrument weight:5Kg

      Shipping & Delivery

      Related products

      ICI Pilling & Snagging Test Machine

      $0.00
      ICI Pilling & Snagging Test Machine An ICI Pilling & Snagging Test Machine is a specialized laboratory instrument designed to
      Add to cart
      Quick view
      Random Tumble Pilling Tester

      Random Tumble Pilling Tester

      $0.00

      Random Tumble Pilling Tester

      Random Tumble Pilling Tester

      Random Tumble Pilling Tester

        The Random Tumble Pilling Tester is a specialized instrument designed to assess the pilling resistance of textile fabrics. Pilling refers to the formation of small, fuzzy balls (pills) on the fabric surface due to wear and friction. This tester simulates the wear conditions that fabrics experience during actual use, providing valuable data on their durability and appearance retention.   Purpose of Random Tumble Pilling Tester The primary function of the Random Tumble Pilling Tester is to evaluate how fabrics resist pilling, fuzzing, and matting. This assessment is crucial for manufacturers aiming to ensure the longevity and aesthetic quality of their textile products.   Working Principle of Random Tumble Pilling Tester The tester operates by placing fabric specimens into cylindrical test chambers lined with cork. Inside each chamber, a stainless steel impeller rotates at a high speed (typically around 1200 revolutions per minute), causing the fabric samples to tumble randomly. Compressed air is injected to enhance the tumbling action. This process simulates the friction and wear that fabrics undergo during regular use. After a predetermined duration, the samples are removed and visually assessed for pilling using standardized rating scales.   Key Specifications of Random Tumble Pilling Tester Test Chambers: Available in configurations of 2 or 4 chambers to accommodate multiple samples simultaneously. - Rotation Speed: Approximately 1200 revolutions per minute. - Chamber Dimensions: Typically around 146 mm in diameter and 152 mm in length. - Impeller Size: Standard impellers measuring about 121 mm. - Compressed Air Pressure: Adjustable, commonly between 14–21 kPa (2–3 psi). - Timer: Digital timer allowing precise control over test duration. - Power Supply: Generally operates on 220V, 50Hz power sources.   Applicable Standards of Random Tumble Pilling Tester The Random Tumble Pilling Tester complies with several international testing standards, ensuring its suitability for global applications:- ASTM D3512- ISO 12945-3- DIN 53867- JIS L 1076- GB/T 4802.4   Benefits of Random Tumble Pilling Tester - Realistic Simulation: Accurately replicates the wear and friction conditions fabrics face during actual use.- Standardized Testing: Adheres to international standards, facilitating consistent and comparable results.- Efficient Evaluation: Allows simultaneous testing of multiple samples, increasing laboratory throughput.- Quality Assurance: Provides manufacturers with critical data to improve fabric formulations and production processes. User-Friendly Operation: Features intuitive controls and clear viewing windows for easy monitoring.   Applications of Random Tumble Pilling Tester The Random Tumble Pilling Tester is widely used in various sectors of the textile industry: - Apparel Manufacturing: Assessing the durability of clothing fabrics. - Home Textiles: Evaluating materials used in upholstery, curtains, and bedding. - Quality Control Laboratories: Routine testing to ensure product consistency and compliance with standards.- Research and Development: Developing new fabrics with enhanced resistance to pilling.     Features of Random Tumble Pilling Tester:
      1. Multiple Test Chambers - Typically comes with 2 or 4 cork-lined chambers for simultaneous testing of multiple fabric samples.
      2. High-Speed Rotating Impellers - Impellers rotate at around 1200 rpm to create intense, random tumbling motion.
       
      1. Compressed Air System - Ensures continuous fabric movement and realistic simulation of wear.
      2. Digital Timer- Allows precise setting of test duration with easy-to-read display.
      3. Viewing Windows- Transparent chamber doors for monitoring fabric movement during testing.
      4. Standard Compliant Design- Meets ASTM D3512, ISO 12945-3, GB/T 4802.4 and other major standards.
       
      1. Robust Construction- Durable materials and components designed for long-term laboratory use.
      2. Easy Sample Handling - Quick-open chamber lids and simple sample placement process.
      3. Compact Footprint- Saves space in laboratory environments.
        How to Use Random Tumble Pilling Tester:
      1. Prepare Samples- Cut fabric into standard-sized specimens (usually circular or rectangular per ASTM/ISO specs)- Condition samples as per the standard (usually 24 hrs at 21°C, 65% RH).
      2. Load the Chambers - Place each sample into a cork-lined test chamber. - Add a small piece of gray cotton backing fabric if required by the method.
       
      1. Set Parameters - Adjust compressed air pressure (typically 14–21 kPa or 2–3 psi).
      - Set the test time (e.g., 30–60 minutes) using the digital timer.
      1. Start the Test- Close the chamber doors and press start. - Impellers rotate, tumbling the samples randomly with air flow.
       
      1. Stop and Unload - Once the timer ends, remove the samples carefully.
      2. Evaluate Pilling - Compare the tested samples to standard pilling rating photographs or scales.
      - Assign a rating from 1 (severe pilling) to 5 (no pilling).
      1. Record Results - Document the pilling grades and any observations.
          Random Tumble Pilling Tester [Scope of application]: It is used to test the fuzzing and pilling performance of the fabric under the condition of free rolling and friction in the drum. [Related standards]: GB/T4802.4 (Standard Drafting Unit) ISO12945.3, ASTM D3512, ASTM D1375, DIN 53867, ISO 12945-3, JIS L1076, etc. [Technical parameter]: 1. Number of boxes: 4 2. Roller specifications: diameter (146±1.0) mm, depth (152.4±1.0) mm; 3. Lining material: polychloroprene lining thickness (3.2±0.4) mm. , Hardness (60～70) IRHD; 4. Impeller specifications: φ12.7 mm×120.6 mm; 5. Plastic blade specifications: 10 mm×65 mm; 6. Rotation speed: 1～2400 rpm can be set freely 7. Working pressure: 14kPa～21kPa; 8. Time counting: (1～999) min. 9. Power supply: AC220V±10% 50Hz 80W 10. Appearance: (480×400×680)mm 11. Weight: 40kg [Standard accessories] Items and specifications Qty. Note Fuse 2 3A Main machine 1 Power cable 1 Air tube 1 Φ8mm Grey cotton sliver 4 Cork lining 4 Rating sample photo 1 White glue 1    
      Add to cart
      Quick view
      Fabric Stiffness Tester
      Fabric Stiffness Tester

      Fabric Stiffness Tester

      $0.00

      Fabric Stiffness Tester

      Fabric Stiffness Tester

      Fabric Stiffness Tester

        Fabric Stiffness Tester is a lab instrument used to measure the stiffness or flexural rigidity of fabric materials. It evaluates how resistant a fabric is to bending, which influences its drape, comfort, and handling characteristics. Purpose of Fabric Stiffness Tester: To determine the stiffness of textiles by measuring the bending length and calculating flexural rigidity, often using methods like the Cantilever Test (as per ASTM D1388 or ISO 9073-7).   Working Principle of Fabric Stiffness Tester: A fabric strip is slid over a horizontal platform until its free end bends under its own weight to a specific angle (usually 41.5°). The length at which this occurs is used to calculate bending length and stiffness.   Main Components of Fabric Stiffness Tester: - Test Platform: Flat surface for sample movement. - Graduated Scale: Measures the overhanging length of fabric. - Angle Indicator: Guides the measurement based on standard deflection angle. - Fabric Clamp or Guide: Helps place and move the sample smoothly.   Applications of Fabric Stiffness Tester: - Apparel fabrics (e.g., for comfort and drape analysis) - Technical textiles (e.g., automotive, medical fabrics) - Paper, nonwovens, and films Benefits of Fabric Stiffness Tester:
      1. Accurate Measurement of Flexibility - Provides reliable data on fabric stiffness, essential for quality control and product development.
      2. Improves Product Comfort - Helps assess how soft or rigid a fabric will feel in clothing or furnishings.
      3. Supports Material Selection - Aids designers and engineers in choosing the right fabric for specific applications based on stiffness.
       
      1. Quality Assurance - Detects fabric inconsistencies or defects that affect handling or drape.
      2. Standards Compliance - Enables testing as per international standards like ASTM D1388 and ISO 9073-7 for global product approval.
      3. Quick and Simple Operation - Delivers fast results with minimal operator training or preparation.
       
      1. Applicable to Multiple Materials - Suitable for woven, nonwoven, knitted fabrics, paper, and films.
      2. Enhances R&D Accuracy - Supports consistent material testing during product innovation and textile finishing.
        Features of Fabric Stiffness Tester:
      1. Graduated Measurement Scale - Precise scale to measure overhang length for accurate stiffness calculation.
      2. Flat Test Platform - Smooth, level surface ensures consistent and reliable fabric movement.
      3. Standard Deflection Angle Guide - Built-in 41.5° angle reference for consistent stiffness testing (per ASTM/ISO).
      4. Manual or Motorized Models - Available in both types for simple or automated operation depending on lab needs.
      5. Compact Design - Space-saving unit ideal for textile labs and quality control rooms.
       
      1. Sample Holder or Clamp - Ensures correct alignment and smooth feeding of fabric strips during testing.
      2. Durable Construction - Made of corrosion-resistant materials like stainless steel or aluminum for long-term use.
      3. Compliance with Standards - Supports methods like ASTM D1388, ISO 9073-7 for stiffness testing of fabrics.
       
      1. Lightweight and Portable - Easy to move and use in various lab settings.
      2. Low Maintenance - Simple mechanical parts require minimal servicing.
        How to Use Fabric Stiffness Tester (Cantilever Method):
      1. Prepare the Sample - Cut the fabric into a rectangular strip (e.g., 25 mm × 200 mm), as per standard.
      2. Place the Sample - Lay the fabric strip flat on the test platform with one end aligned at the zero mark.
      3. Slide the Fabric - Gently push the fabric forward so it slowly overhangs the platform.
       
      1. Watch for Deflection - Stop sliding when the free end of the fabric bends down to the reference angle (typically 41.5°).
      2. Read the Bending Length - Measure the overhang distance from the scale. This is the bending length (C).
      3. Calculate Flexural Rigidity
      - Use the formula: G = W × C³ Where: - G = Flexural rigidity (mg·cm) - W = Fabric weight per unit area (mg/cm²) - C = Bending length (cm)  
      1. Repeat for Accuracy - Test both warp and weft directions and average the results for better accuracy.
      Tip: Always perform the test in a controlled environment (standard temperature and humidity) for reliable results.         Fabric Stiffness Tester Scope of application It is used to measure the stiffness of cotton, wool, silk, linen, chemical fibers and other woven fabrics, knitted fabrics, general nonwovens, coated fabrics, etc. It is also suitable for measuring the stiffness of paper, leather, film and other flexible materials. Relevant Standards GB/T 18318, ASTM D 1388, IS09073-7, BS EN22313 etc. [Instrument Characteristics] 1. Infrared photoelectric invisible inclined plane detection system replaces the traditional tangible inclined plane, realizes non-contact detection, and overcomes the problem that the measurement accuracy is affected by the sample torsion lifted by the inclined plane. 2. The inclination adjustable mechanism of instrument measurement to meet different test requirements. 3. Stepping motor drive, accurate measurement, smooth operation; 4. The color touch screen display can show the extended length, bending length, bending stiffness of the sample, the warp average, the weft average and the total average of the above values respectively. 5. Printing of Chinese report forms for thermal printers. Technical parameters 1. Test methods: The two method (A method: Weft test, B method: Forward and backward test) 2. Measurement angle:41.5 degree, 43 degree and 45 degree adjustable 3. Extend the length range:5-220 mm (special requirements can be made at the time of ordering) 4. Length resolution:0.01mm 5. Measurement accuracy:±0.1mm 6. Specimen specifications:250×25mm 7. Work platform specifications:250×50mm 8. Specification of sample pressing plate:250×25mm 9. Pushing speed of press plate:3 mm/s; 4 mm/s; 5 mm/s 10. Display output: Touch screen display 11. Print Output: Chinese Report 12. Data Processing Volume: A total of 15 groups, each group less than 20 trials 13. Printer: Thermal printer 14, power supply:AC220V 50Hz 15. Host volume:570mm×360mm×490mm 16. Host weight:20kg
      Add to cart
      Quick view
      GSM Cutter with Balance
      GSM Cutter with Balance

      GSM Cutter with Balance

      $0.00
      GSM Cutter with Balance
      GSM Cutter with Balance

      GSM Cutter with Balance

        A GSM Cutter with Balance is a lab toolset used to determine the GSM (Grams per Square Meter) of fabrics, which indicates the fabric's weight and density. The kit includes a GSM round cutter and a precision weighing balance.   Purpose GSM Cutter with Balance: To accurately measure the weight per unit area of textile, paper, or nonwoven samples for quality control and product classification.   How It Works: GSM Cutter: - A circular blade cuts a fixed area (usually 100 cm²) from the fabric. Weighing Balance: - The cut piece is weighed, and the result is multiplied by 100 to get GSM. GSM = Weight (in grams) × 100   Applications of GSM Cutter with Balance: Textile and garment industry Nonwovens and paper manufacturing QC labs and R&D   Benefits of GSM Cutter with Balance: Accurate GSM Measurement - Ensures precise fabric weight analysis for quality control. Quick and Simple Operation - Allows fast sampling and GSM calculation in minutes. No Need for Area Calculation - Cutter gives a fixed area (usually 100 cm²), simplifying the formula. Improves Product Consistency - Helps maintain uniform fabric weight across batches.   Portable and User-Friendly - Compact design makes it ideal for labs and production floors. Cost-Effective Tool - Offers high accuracy without the need for expensive equipment. Versatile Use - Suitable for fabrics, paper, leather, films, and more.   Features of GSM Cutter with Balance: Rotary Blade Cutter - Stainless steel blades for clean and accurate circular cuts. Fixed Sample Area - Typically 100 cm², eliminating the need for area measurement. Precision Digital Balance   - Measures in grams with high resolution (0.01 g or better).   Rubber Cutting Pad - Protects blade and provides a smooth surface for cutting. Safety Lock - Prevents accidental blade exposure. Compact & Durable Design- Long-lasting, lab-friendly construction.   How to Use GSM Cutter with Balance: Prepare the Fabric Sample- Place the fabric on the rubber cutting pad. Cut the Sample - Hold the GSM cutter firmly and rotate it to cut a 100 cm² circular sample. Turn on the Balance - Power up the digital weighing scale and tare it to zero.   Weigh the Sample - Place the cut fabric piece on the balance and note the weight in grams. Calculate GSM - Multiply the weight by 100 to get GSM.  - GSM = Sample weight (g) × 100 Record the Result- Log the GSM value for quality control or analysis. Clean and Store - Wipe the cutter and balance, and store them safely after use.   GSM Calculation Formula: GSM (g/m²) = (Weight of Sample in grams) × 100 When using a GSM cutter (100 cm²): The cutter gives a fixed area of 100 cm², which is 1/100th of a square meter. So, multiplying the sample's weight by 100 gives the GSM directly. Example: If the sample weighs 1.75 g, then: GSM = 1.75 × 100 = 175 g/m²   Balance Calibration Guide (Manual Calibration): Warm-Up   - Turn on the balance and let it warm up for 10–15 minutes if required. Level the Balance   - Use the built-in bubble level and adjust leveling feet until the bubble is centered. Tare the Balance   - Press the “TARE” or “ZERO” button to reset the display to 0.000 g.   Enter Calibration Mode   - Press the “CAL” or “MODE” button (depends on the model). - Some balances may require holding the button for a few seconds. Use Standard Weight   - When prompted, place a certified calibration weight (e.g., 100g, 200g) on the pan.   - Wait for the display to stabilize.   Confirm Calibration   - The balance will beep or show “PASS” once successful.   - Remove the weight when done. Recheck Zero  - Ensure the display returns to 0.000 g after removing the weight.   Tips: Use certified weights for accuracy (Class F1 or E2). Calibrate in a draft-free, vibration-free environment. Calibrate daily or before critical measurements.     GSM Cutter  & Balance GSM Cutter Brand: Schroder Origin: Germany Capacity: 100 Sq.cm Supplied with 1 pcs cutting Pad and 04 pcs cutting blade. Digital Electronics balance Precision GSM Weight Balance 0.01g to 200g Model: GSM200 Brand: Schroder Origin: Germany
      Add to cart
      Quick view
      Hydraulic GSM Cutter
      Hydraulic GSM Cutter

      Hydraulic GSM Cutter

      ,
      $0.00

      Hydraulic GSM Cutter

      Hydraulic GSM Cutter

      Hydraulic GSM Cutter

        A Hydraulic GSM Cutter is a precision instrument used to cut circular fabric samples for GSM (Grams per Square Meter) testing. It uses hydraulic pressure to ensure clean, uniform cuts through multiple fabric layers, making it ideal for high-throughput or thicker materials.   Purpose of Hydraulic GSM Cutter: - To prepare accurate circular samples (usually 100 cm² area) for determining fabric weight in GSM. - Used widely in textile testing labs for quality control and consistency.   Working Principle of Hydraulic GSM Cutter: - Fabric is placed on a cutting pad. - The cutter, equipped with a sharp circular blade, is hydraulically pressed down on the fabric. - The cut sample is then weighed to calculate GSM using a formula or GSM scale.   Applications of Hydraulic GSM Cutter: - Suitable for woven, knitted, and nonwoven fabrics. - Used in textile mills, labs, and R&D centers.   Benefits of Hydraulic GSM Cutter:
      1. High Cutting Precision - Ensures consistent and accurate fabric sample size for reliable GSM results.
      2. Effortless Operation- Hydraulic action reduces manual effort and operator fatigue.
      3. Ideal for Thick or Multi-Layer Fabrics - Cuts through dense or multiple fabric layers cleanly.
       
      1. Time-Saving - Speeds up the sample preparation process, especially for high-volume testing.
      2. Improves Test Accuracy - Uniform samples help eliminate errors in GSM calculation.
      3. Durable and Long-Lasting - Robust construction ensures stability and extended service life.
       
      1. Safety Enhancement - Reduces risk of injury compared to manual rotary cutters.
      2. Consistent Pressure Application - Hydraulic mechanism maintains steady force for each cut.
        Features of Hydraulic GSM Cutter:
      1. Hydraulic Press Mechanism - Applies consistent and strong pressure for clean, even cuts.
      2. Standard Cutting Die (100 cm²) - Produces fabric samples suitable for GSM testing with standard area.
      3. Heavy-Duty Construction - Built with robust metal frame for long-term lab or industrial use.
       
      1. Sharp Stainless Steel Blades - Durable and replaceable blades ensure smooth, precise cuts.
      2. Cutting Pad Included - Comes with a rubber or nylon base to protect blades and ensure clean edges.
      3. Simple Lever or Button Operation - Easy to use with minimal training required.
      4. Non-slip Base - Provides stability during operation for safe, accurate cutting.
      5. Supports Various Fabric Types
      - Suitable for woven, knitted, nonwoven, technical textiles, and coated fabrics.   How to Use Hydraulic GSM Cutter:
      1. Place the Cutting Pad - Lay the rubber or nylon cutting pad on a flat surface.
      2. Position the Fabric - Place the fabric sample flat and smooth on the cutting pad.
      3. Align the Cutter - Position the GSM cutter die over the desired area of the fabric.
      4. Activate Hydraulic Press - Pull the lever or press the button to apply hydraulic pressure and cut the sample.
       
      1. Remove the Sample - Lift the cutter and carefully take out the circular fabric piece (usually 100 cm²).
      2. Weigh the Sample - Place the cut sample on a precision balance or GSM scale to determine weight.
      3. Calculate GSM - Multiply the sample weight (in grams) by 100 to get GSM.
        GSM Formula (Grams per Square Meter): GSM is used to measure the weight of fabric and indicates its thickness and quality. Formula: GSM = (Sample Weight in grams × 10000) / Sample Area in cm² For standard cutters that cut 100 cm² samples: GSM = Sample Weight (in grams) × 100   Example: - If a 100 cm² fabric sample weighs 1.5 grams: GSM = 1.5 × 100 = 150 GSM
      Hydraulic GSM Cutter

      Hydraulic GSM Cutter

      Add to cart
      Quick view
      Xenon Arc Light Fastness Tester
      Xenon Arc Light Fastness Tester

      Xenon Arc Light Fastness Tester

      $0.00
      Xenon Arc Light Fastness Tester Xenon Arc Light Fastness Tester is a laboratory instrument used to evaluate the color fastness
      Add to cart
      Quick view
      Pneumatic bursting tester

      Bursting strength tester

      ,
      $0.00
      Bursting strength tester

      Pneumatic bursting strength tester

      true burst

      Pneumatic bursting tester China national patent：ZL201210486480.8 ZL201220628425.3 Pneumatic bursting strength tester China national patent：ZL201210486480.8 ZL201220628425.3 [Scope of application]: It is used to measure the burst strength and burst expansion degree of various fabrics, including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other fabrics made by other processes, under standard conditions or wet conditions. This method is employed to assess the burst strength and degree of burst expansion of various types of fabrics, such as knitted, woven, non-woven, laminated, and others produced through different processes, under both standard and wet conditions. This technique is utilized to evaluate the burst strength and extent of burst expansion in various fabric types, including knitted, woven, non-woven, laminated, and others produced through diverse manufacturing processes, under both standard and wet conditions. Benefits of Bursting strength tester: Fast testing cycle for fast feedback to the production • Auto-start, a photocell detects the presence of a sample and automatically initiates a measurement sequence, thus allowing hands-free operation • Auto-cycling function permits the continuous cycling of the upper pressure foot to facilitate representative and continuous measurements
      • Available with automatic test strip feeder Measurements are simple to make with the Mullen type Bursting Strength Tester. Fast automatic measurements Measurement starts automatically once a test piece has been placed in the measuring gap. The clamping foot descends, and a bursting strength measurement is made.
      The sample is then quickly released and is ready for the next measurement at a new position. To maximize the sample measurement rate, the tester uses a minimum of time between the bursts, so that a series of 10 measurements can be done in less than 45 seconds. The actual measuring time depends of course on the type of paper or paper board being tested. Three Different test results can be reported after a single measurement; bursting strength standard, bursting strength compensated, and bursting energy absorption (BEA).Bursting strength tester can be compensated for the stiffness of the diaphragm For low bursting strength levels, the stiffness of the diaphragm can account for a large portion of the bursting strength value. If desired, the device can also measure, calculate, and report effective bursting strength compensated from the effects of the diaphragm. Measurement of Bursting Energy Absorption (BEA) is used to determine the energy absorption capability of a material. Strong, flexible paper has higher energy absorption values, while brittle, stiff paper has lower values. Bursting Strength Tester calculates and reports BEA according to the SCAN P 24 standard Related standards of Bursting strength tester: GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc. [Instrument characteristics]: 1. Microcomputer control, automatic burst test, automatic correction, automatic data processing, and output results in the form of experimental report. 2. Aerodynamics, high cleanliness. 3. Color touch screen interface, Chinese and English menu operation, support online communication.
      1. Bursting pressure can reach up to 1.2MPa 5. The maximum burst and expansion degree can reach 70mm. 6. Strengthen the lighting system on the test surface. 7. The main aerodynamic force helps to clamp the sample system. 8. A variety of test areas are available, and the switching is easy.
      2. A variety of unit conversions between Chinese and English. 10. Reliable anti-pinch safety protection design. [Technical parameter]: 1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized) 2. The minimum graduation value: 0.0001Mpa 3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree pressurization.
      4. Test accuracy: ≤±0.2%F·S 5. Thickness of elastic diaphragm: ≤2mm 6. Testing area: cm²） 100 50 10 7.3 Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5 7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min 8. Safety cover: high-transparent plexiglass 9. Power supply: AC220V±10% 50Hz 800W 10. Dimensions: (470×490×780)mm (host L×W×H)
      Add to cart
      Quick view
      Stretch Recovery Tester (Static Method)

      Stretch Recovery Tester Static Method

      ,
      $0.00

      Stretch Recovery Tester Static Method 

      Stretch Recovery Tester (Static Method)

      Stretch Recovery Tester

        A Stretch Recovery Tester Static Method is a lab instrument used to evaluate the stretch ability and recovery properties of fabrics, elastomers, or other stretchable materials. This method is crucial in textiles and material science to assess how well a material returns to its original shape after being stretched. Key Functions of Stretch Recovery Tester Static Method : - Measures elongation under a fixed force or length. - Assesses the recovery percentage after a specified recovery time once the force is removed. - Evaluates fabric's resilience, durability, and comfort properties. How It Works Stretch Recovery Tester  Static Method:
      1. A sample is stretched to a predetermined extension or force.
      2. The stretch is maintained for a set period.
      3. After removing the load, the recovery (return to original length) is measured after a fixed time.
      4. The fabric sample is clamped and stretched to a specific length or force.
      5. It’s held for a fixed duration (e.g., 1–5 minutes).
      6. The tension is released, and the sample is allowed to recover.
      7. The recovered length is measured after a set time.
      Main Components: - Fixed clamps to hold the sample. - Movable clamps for stretching. - Precision scale or ruler for measuring elongation and recovery. - Timing device (manual or digital) to control stretching and recovery periods. - To assess elastic recovery and dimensional stability after stretching. Applications: - Used in testing knitwear, sportswear, elastic fabrics, and compression garments. - Helps in product development and quality assurance. Stretch Recovery Tester Static Method is designed to determine the stretch recovery property of elastic material by static method. 2.0mm thickness stainless steel frame and base board, makes the tester firm and stable. Sample holder can be slid along the guide rail smoothly and can be fixed at any position of the rail. Test Scope：elastomeric material Testing Standards：ASTM D2594、ASTM D3107, etc. key features of a Stretch Recovery Tester Static Method: Adjustable clamps and measurement scale. - Timer for accurate stretch/recovery periods. - Simple mechanical design for ease of use. ✅ 1. Manual or Semi-Automatic Operation - Allows controlled stretching and recovery measurements. - Simple setup for routine quality control. ✅ 2. Adjustable Clamp System - Securely holds samples of various sizes and thicknesses. - Ensures consistent test conditions. ✅ 3. Precision Measurement Scale - Provides accurate readings of elongation and recovery length. - Often graduated in millimeters or inches. ✅ 4. Sturdy Frame - Made of corrosion-resistant metal or coated steel. - Ensures durability and stability during testing. ✅ 5. Time Control Support - Timer to monitor stretch and recovery durations. - Helps standardize test procedures. ✅ 6. Compact Design - Space-saving for lab environments. - Easy to move and operate. ✅ 7. Compliance with Standards - Often designed to meet standards like ASTM D3107 or BS 4294. Would you like a comparison with the dynamic method or specifications for a particular model? key benefits of using a Stretch Recovery Tester Static Method: ✅ 1. Accurate Fabric Performance Analysis- Provides reliable data on stretch and recovery, critical for assessing elasticity and fit. ✅ 2. Easy to Operate- Simple, manual setup makes it ideal for routine testing and quality control. ✅ 3. Cost-Effective- More affordable than dynamic testers, making it suitable for smaller labs or production units. ✅ 4. Standardized Testing- Supports industry-standard methods (e.g., ASTM D3107), ensuring consistency across tests. ✅ 5. Versatile Applications- Suitable for testing knit fabrics, elastic bands, spandex materials, and other stretchable textiles. ✅ 6. Durable and Low Maintenance- Mechanically straightforward with minimal upkeep required. ✅ 7. Enhances Product Development- Helps designers and manufacturers optimize materials for comfort, performance, and durability. Applications: - Textile R&D - Production quality control
      Stretch Recovery Tester (Static Method)

      Stretch Recovery Tester

      - Evaluating materials for comfort, durability, and fit Stretch Recovery Tester Diller In Bangladesh, Stretch Recovery Tester Importer In Bangladesh, Stretch Recovery Tester in Bangladesh, Stretch Recovery Tester in Bd, Stretch Recovery Tester In Uttara, Stretch Recovery Tester Price in Bangladesh, Stretch Recovery Tester Supplier in Bangladesh  
      Add to cart
      Quick view