HTHP Glycerin bath dyeing machine
HTHP Glycerin bath dyeing machine
360 product view
    Click to enlarge
    HTHP Glycerin bath dyeing machine
    HTHP Glycerin bath dyeing machine
    Rainin Digital Pipette
    Rainin Digital Pipette $0.00
    Back to products
    IR Dyeing Machine Dunlin
    IR Dyeing Machine Dunlin $0.00

    HTHP Glycerin bath dyeing machine

    $0.00

    HTHP Glycerin Bath Dyeing Machine
    HTHP Glycerin bath dyeing machine

    HTHP dyeing machine

     

    The HTHP Glycerin Bath Dyeing Machine (High Temperature High Pressure) is a laboratory or small-scale dyeing machine designed to dye textile samples, especially synthetic fibers like polyester, under high temperature and pressure using glycerin as a heating medium instead of water.

    Key Features:

    1. High Temperature Capability – Operates up to 140°C or more, ideal for disperse dyeing of polyester which requires elevated temperatures.
    2. Glycerin as Heat Transfer Medium – Glycerin allows for precise and uniform heating beyond the boiling point of water, without pressure buildup as in steam-based systems.
    1. Small Sample Dyeing – Used for lab-scale dyeing of fabric or yarn samples (commonly 5–10 g per tube), useful in R&D or color matching.
    2. Multiple Sample Capacity – Usually has multiple dyeing tubes/chambers for simultaneous dyeing of several samples under identical conditions.
    1. Accurate Temperature and Time Control – Digital or microprocessor-based controllers regulate temperature, heating rate, and timing precisely.
    2. Uniform Dyeing – Ensures even dye penetration due to consistent heat distribution and controlled rotation or agitation.
    1. Energy Efficient Glycerin’s heat retention reduces energy consumption compared to steam systems.
    2. Compact and Durable Design – Bench-top design, made from stainless steel and heat-resistant components for long life and lab use.

    Applications:

    – Disperse dyeing of polyester.

    – Color matching and development.

    – Small-batch dye recipe trials before production.

    Benefits of HTHP Glycerin Bath Dyeing Machine:

    High-Temperature Dyeing – Enables dyeing of synthetic fibers like polyester at temperatures above 100°C without requiring high-pressure steam systems.

    1. Uniform Heating with Glycerin – Glycerin provides consistent heat transfer, ensuring even dye uptake and minimizing shade variation.
    1. Energy Efficient- Glycerin retains heat longer, reducing energy consumption compared to traditional steam-based dyeing.
    2. Accurate Process Control – Precise temperature and time control enhance reproducibility and dyeing consistency.
    1. Ideal for Lab and Sample Work – Perfect for R&D, shade matching, and recipe development with small fabric or yarn samples.
    2. Multi-Sample Dyeing – Allows multiple samples to be dyed simultaneously under identical conditions, saving time and effort.
    3. Compact and Safe – Bench-top design fits in laboratories and is safer than high-pressure steam systems.
    1. Low Maintenance – Simplified operation and fewer mechanical parts compared to steam-based systems lower upkeep needs.
    2. Faster Dyeing Cycles- Glycerin heats and cools quickly, reducing overall dyeing time.

    Features of HTHP Glycerin Bath Dyeing Machine:

    1. High-Temperature Operation – Capable of dyeing up to 140–150°C, suitable for synthetic fibers like polyester.
    2. Glycerin as Heat Medium – Uses glycerin for uniform, efficient heat transfer without generating high steam pressure.
    1. Multiple Dyeing Chambers – Usually equipped with 6–24 tubes for simultaneous multi-sample dyeing under identical conditions.
    2. Digital Temperature Controller- Offers precise control of temperature, time, and heating rate with programmable settings.
    1. Compact and Lab-Friendly Design – Bench-top model, easy to operate in laboratory environments with limited space.
    2. Stainless Steel Construction – Corrosion-resistant and durable for long-term, high-temperature operation.
    3. Safety Features – Includes over-temperature protection and thermal insulation to prevent heat loss and ensure operator safety.
    1. Agitation or Sample Rotation- Some models offer rotation or agitation for uniform dye penetration.
    2. Energy Efficient Heating – Glycerin’s heat retention improves energy efficiency over water- or steam-based systems.
    3. Low Maintenance – Simplified mechanical system reduces the need for frequent servicing.

    HTHP Glycerin Bath Dyeing Machine dealer In Bangladesh,

    Glycerin Bath Dyeing Machine Importer in Bangladesh,
    HTHP  Dyeing Machine in Bangladesh,
    HTHP Bath Dyeing Machine in Bd,
    HTHP Dyeing Machine In Uttara,
    Glycerin Bath Dyeing Machine Price in Bangladesh,
    HTHP Dyeing Machine Supplier in Bangladesh,
    Glycerin Bath Dyeing Machine in Bangladesh,

     

    High temperature glycerin Bath Dyeing machine.
    Brad: DUNLIN
    Origin: China
    Application scope of high temperature glycerin machine: it is suitable for high temperature sample
    dyeing and washing fastness test of needle woven fabric, woven fabric, yarn, cotton, loose fiber
    and zipper. It is a high temperature dyeing sample machine specially designed for dyeing industry,
    chemical industry, raw material and cloth industry. It can accurately simulate the actual production
    conditions and achieve the required process effect.
    Parameter specification:
    Model: H-24P
    Number of test cups: 24*450ml
    Maximum dyeing temperature: 235 ℃
    Bath ratio: 1:10~1:60
    Heating power: 10800w
    Heating medium: Glycerin
    Motor power: 0.75w
    Rotor speed: 42 r/min

    Category: Tags: , , , , , , , Brand:
    Shipping & Delivery

    Related products

    IR Dyeing Machine Dunlin

    IR Dyeing Machine Dunlin

    , ,
    $0.00
    IR Dyeing Machine Dunlin
    IR Dyeing machine Dunlin is Safe, high efficiency, environment friendly, energy saving, optimum for new dyeing small sample machines

    IR Dyeing Machine Dunlin

    24 pot 300 ml IR Dyeing Machine Dunlin Application  This machine is oil bath type infrared laboratory dyeing machine, it combine the advantages of traditional glycerol dyeing machine with common infrared dyeing machine together. It’s apply to dyeing and testing the color fastness of the knitted fabric, woven fabric, yarn, cotton, loose fiber, zipper etc. It was special design for dyeing industry, chemical industry, raw material, cloth which can simulate the production conditions exactly and reach the process effect. Used for simulate the dyeing process in actual production, even apply for the small-batch production. Characteristics  Safety, high efficiency, environmental protection, energy saving and consumption reduction, which can fully meet the requirements of dyeing and color matching experiments; segmented heating sampling experiments, segmented, uniform  dyeing and Permeability test, dye absorption rate tests of pH, temperature and bath ratio differences, concentration and other tests, etc. In addition, the machine is highly personalized, and can make different specifications of dyeing steel cups according to customer needs. Feature   Easy to operate, dye pot can be individually Turn plate removed to save waiting time. The ability to conduct the tests of various dyes and chemicals on dispersing, leveling, liquor ratio exhausting etc. l Special recommendation for “STEP DYEING "to select the best dyestuff and combinations for the most Suitable dyeing curve to achieve the highest efficiency and quality Different sizes of dye pots for various weight of samples with yarn or fabric holders to ensure the good leveling result .There will be no crease mark.  Suitable for low liquor ratio dyeing. Sample weight from 4g to 20g.  Special design for humanity, durability and easy-maintenance. Safe, high efficiency, environment friendly, energy saving, optimum for new dyeing small sample machines Product Parameter of IR Dyeing machine Dunlin specifically designed with a focus on human usability, durability, and ease of maintenance. It prioritizes safety, high efficiency, and environmental friendliness while also being energy-saving. This machine is optimal for new dyeing small sample machines due to its product parameter advantages. specifically designed to prioritize humanity, durability, and ease of maintenance. It offers a safe, high-efficiency operation while being environmentally friendly and energy-saving. This machine is optimal for new dyeing small sample machines due to its specialized features and product parameters.  Model : IF-24S Infrared Laboratory Dyeing Machine Key Specification Model : IF-12S IF-24S Staining cup number 12/24 Staining cup volume 300cc OR 425cc Control mode LCD Microprocessor type, programmable process number: 100(0—99), 100 programmable steps per process Heat method Infrared heat Temperature range RT - 140 ℃ Temperature control accuracy ±0.2 ℃ Heating rate

    0 - 3.5 ℃ / min Cooling rate 0.2 - 5 ℃ / min Cooling method Air-cooled Rotation speed 0 - 60 rpm Liquor ratio 1:5 -1:100 Power supply 1∮AC 220V 50/60HZ Dimensions( L x W x H) 670×670×780mm 860×680×780mm Weight 100kg 120kg Standard Accessories Cups 1set

    Put the test sample. Cups stand 1set Place where to put cups. Protective glove 1set To avoid to be hurt by HT cups. Model: IF-24SCapacity: 24 pots Brad: DUNLIN Origin: China

    Color dyeing tests for various dyestuffs of IR Dyeing machine Dunlin
    1. Step dyeing tests. C. Dispersing, levelling and impregnating test. D. High or low liquor ratio exhausting tests. E. Fabric steak and staining tests. F. Concentration tests and others. Protection and Safety gates to protect. Temperature control accuracy +/- 0.2degree
    Working temperature of IR Dyeing machine Dunlin 20 – 140 degree Heating rate of dye bath 0 – 3.5degree / min Cooling rate 0.2 – 5 degree / min Cooling method air-cooled / Auto Speed control frequency conversion Rotation speed 0 – 60 turn / min Microprocessor type Newhaven controller 99 programs each Program with 99steps. IR Dyeing Machine Dunlin
    IR Dyeing machine

    IR Dyeing machine

     
    Add to cart
    Quick view
    Laboratory tenter

    Laboratory tenter

    $0.00

    Laboratory Tenter

    Laboratory tenter

    laboratory mini tenter

      A Laboratory Tenter (or Lab Stenter) is a small-scale version of an industrial tenter machine used in textile finishing. It is designed for heat-setting, drying, and finishing of fabric samples under controlled conditions in textile testing labs or R&D departments.   Key Features:
    1. Heat-Setting and Drying - Simulates the process of setting fabric dimensions and applying finishes using controlled temperature and tension.
    2. Fabric Width Control - Uses clips or pins on chains or rails to hold fabric edges and stretch them to desired width, just like in full-size tenters.
     
    1. Adjustable Temperature and Speed - Digital controls allow precise setting of drying/curing temperature and conveyor speed to match production conditions.
    2. Compact Design - Bench-top or floor-standing units suitable for labs with limited space.
    3. Transparent Viewing Chamber - Allows visual inspection of fabric behavior during processing.
     
    1. Versatile Application Range - Can process woven, knitted, and nonwoven fabrics of various compositions (cotton, polyester, blends, etc.).
    Applications: - Heat-setting of synthetic fabrics like polyester. - Drying after dyeing, printing, or chemical treatment. Dimensional stability testing (shrinkage/elongation). - Finish evaluation (e.g., softness, stiffness, water repellency). - Process optimization before bulk production.   Benefits of Laboratory Tenter:
    1. Accurate Simulation of Production - Replicates industrial finishing processes for reliable lab-scale testing and development.
    2. Improves Fabric Quality- Allows precise control of heat and tension, optimizing fabric properties like shrinkage, dimensional stability, and hand feel.
     
    1. Cost-Effective - Enables process trials and fabric development without using full-scale production equipment.
    2. Speeds Up R&D - Facilitates quick testing and adjustment of settings for new fabric styles or finishes.
    3. Versatile Applications - Suitable for drying, heat-setting, finishing, and evaluating different types of fabrics and treatments.
     
    1. Space-Efficient - Compact design fits easily into textile labs or sample rooms.
    2. Energy Efficient- Uses less power than industrial machines, ideal for small-scale and repeated testing.
    3. Process Control and Reproducibility- Digital controls ensure consistent and repeatable results, aiding in quality assurance and product development.
     
    1. Enhances Safety - Built with lab use in mind, featuring insulation and safety systems to protect users.
      Features of Laboratory Tenter:
    1. Precise Temperature Control - Digital temperature setting (typically up to 220–250°C) for accurate heat-setting and drying.
    2. Adjustable Fabric Width - Equipped with clip or pin chains to hold and stretch fabric across the width, simulating real stentering.
     
    1. Variable Conveyor or Chain Speed- Adjustable speed to control fabric dwell time during processing.
    2. Compact and Lab-Friendly Design - Designed for bench-top or small floor space use in textile labs.
    3. Transparent Chamber Window - Allows monitoring of fabric behavior during treatment.
    4. Digital Display and Control Panel - Easy operation for setting temperature, speed, and time.
     
    1. Uniform Heat Distribution- Ensures even treatment across the fabric width for accurate testing.
    2. Stainless Steel Construction - Durable, corrosion-resistant body for long-term use at high temperatures.
    3. Safety Features - Includes over-temperature protection, insulated body, and emergency stop functions.
    4. Sample Versatility - Suitable for various fabric types (woven, knit, synthetic, blends) and lab finishing tasks.
      Laboratory Mini tenter Dryer dealer In Bangladesh, Lab Mini tenter Dryer Importer in Bangladesh, Mini tenter Dryer in Bangladesh, Laboratory tenter Dryer in Bd, Lab tenter Dryer In Uttara, Lab tenter Price in Bangladesh, Laboratory tenter Dryer in Bangladesh, Laboratory Mini Dryer in Bangladesh,     Continuous Tenter Laboratory tenter
    Laboratory tenter

    laboratory mini tenter

    Used for continuous drying, curing , and thermo setting process , etc .Instead of tradition oven, can output sample more quick and flat, save a lot of time and increase efficiency. adjustable of feeding & setting separately . Simulating the production onsite to continuous drying. Laboratory Dyeing and Finishing Machine Laboratory tenter Continuous Tenter Machine Dunlin price in Bangladesh Laboratory tenter Continuous Tenter Machine Dunlin in textile Textile testing equipment in Bangladesh Textile testing equipment in Dhaka Textile testing equipment in Uttara MAAM tex Laboratory tenter Continuous Tenter Machine Dunlin price in Bangladesh
    Add to cart
    Quick view
    digital-precision-balance

    Digital precision balance

    ,
    $0.00

    digital precision balance

    digital-precision-balance

    2/3/4/5 Digit Digital precision Balance

    digital precision balance is a weight balance machine. It’s used to Low capacity balance. digital precision balance  play an important role to accurate measurement. Digital precision balance is used to check weight paper, jewelry etc. It shows accurate result. We have the best collection of digital precision balance. MAAM TEX IS the best supplier of Precision Balance in Bangladesh
    A Digital Precision Balance is a high-accuracy electronic weighing device used in laboratories, industries, and educational institutions for measuring mass with a high degree of precision. It is essential for tasks that require meticulous weight measurements, such as chemical analysis, formulation, and quality control. Key Features:
    1. High Accuracy & Precision: - Typically offers readability from 0.1 g to 0.001 g (or even finer). - Ideal for weighing small amounts of material where accuracy is crucial.
    2. Digital Display: - Large, backlit LCD or LED display for easy reading. - Some models include touch screen interfaces.
    3. Tarring Function: - Allows you to subtract the weight of a container or packaging to get the net weight.
    4. Calibration: - Internal or external calibration to maintain accuracy over time. - Some advanced models have auto-calibration features.
    5. Weighing Units: - Supports multiple units like grams (g), milligrams (mg), carats (ct), and ounces (oz). Stable Platform:   - Includes a draft shield to protect against air currents and vibrations, which can affect measurement accuracy.
    Common Applications:- Laboratory Analysis: Precise measurement of chemicals and reagents.- Pharmaceuticals: Formulation and quality control.- Jewelry: Accurate measurement of precious metals and stones.- Education: Scientific experiments in schools and universities. Benefits:- Reliable and Consistent Measurements- User-Friendly Operation- Compact Design with Minimal Footprint- Improved Workflow Efficiency- Enhanced Data Handling (USB or RS232 ports for data transfer in advanced models) Benefits of digital precision balance Here are the key benefits of using a Digital Precision Balance:
    1. High Accuracy and Precision- Delivers extremely accurate weight measurements, often down to 0.001 g or better.- Crucial for experiments and applications where even slight variations can affect outcomes.
     
    1. User-Friendly Interface- Digital display makes readings easy to read and interpret.- Most models include intuitive controls for functions like tarring, unit conversion, and calibration.3. Speed and Efficiency- Provides instant, stable readings, saving time compared to manual or mechanical balances.- Streamlines lab workflows and enhances productivity.
    2. Versatile Applications- Suitable for various fields including chemistry, biology, pharmacology, food testing, and gemology.- Can handle diverse weighing tasks from solids to liquids and powders.
    3. Advanced Features- Tare Function: Subtracts the weight of containers automatically.- Multiple Weighing Units: Supports various measurement units.- Data Connectivity: Many models allow connection to computers or printers for data logging.
    4. Portability and Space Efficiency- Compact design fits easily in most laboratory setups.- Lightweight models are easy to move and store.
    5. Enhanced Safety and Reliability- Stable platform and draft shields reduce environmental interference.- Built-in calibration ensures ongoing accuracy.
    Here’s a step-by-step guide on how to use a Digital Precision Balance safely and accurately: 1. Set Up the Balance- Place the balance on a stable, vibration-free, and level surface.- Avoid placing near fans, windows, or air vents to prevent air drafts.- Allow the balance to warm up (usually 15–30 minutes) if it has just been turned on. ⚙️ 2. Calibrate the Balance - If it’s manual calibration, use certified calibration weights. - For auto-calibration models, follow on-screen instructions. - Calibration ensures accuracy in measurements. ⚖️ 3. Tare the Balance - Place the container or weighing paper on the balance. - Press the “Tare” or “Zero” button to set the display to zero. This subtracts the container’s weight. 4. Weigh the Sample - Carefully add the sample into the container. - Wait for the reading to stabilize (usually indicated by a stable icon or beep). - Read the weight from the digital display. 5. Repeat or Change Units (if needed) - You can press the unit button to switch between grams, milligrams, ounces, etc., depending on your needs.   6. Clean After Use - Remove any spilled substances. - Wipe the surface with a soft, lint-free cloth. Do not use harsh chemicals unless specified by the manufacturer. ⚠️ Tips for Best Use: - Avoid touching the container with bare hands (use tweezers or gloves to avoid adding extra weight from oils or moisture).- Use a draft shield if available to minimize airflow interference.- Do not overload the balance beyond its maximum capacity—it can damage the sensors.
    Add to cart
    Quick view
    Laboratory Padder
    Laboratory Padder

    Laboratory Padder

    $0.00

    Laboratory Padder

    Laboratory Padder

    Mini Lab Dyeing Padder

    A Laboratory Padder is a compact, laboratory-scale machine used to apply liquids like dyes, chemicals, and finishes to fabric samples. It simulates the padding process in textile manufacturing, where fabric is passed through a liquid solution, then squeezed between rollers to ensure uniform application and absorption.   Key Features of a Laboratory Padder:
    1. Adjustable Rollers - The fabric is passed through two or more rollers to apply even pressure and squeeze out excess solution, ensuring uniform chemical or dye application.
    2. Variable Pressure Control - Allows adjustment of roller pressure for different fabric types and chemical formulations, ensuring optimal penetration without damage.
     
    1. Solution Bath - Holds the liquid (e.g., dye, finish, or other chemical treatments) in a bath through which the fabric is dipped before passing through the rollers.
    2. Fabric Speed Control - Adjustable conveyor speed allows for control over the time the fabric spends in contact with the liquid solution, affecting the degree of treatment.
     
    1. Digital Control Panel - Provides easy adjustment of pressure, speed, and solution volume to ensure precise and reproducible results.
    2. Compact Design - Smaller, lab-scale version of industrial padders, ideal for research, development, and small-scale testing.
     
    1. Safety Features - Safety guards, emergency stops, and proper handling mechanisms to prevent accidents during operation.
    Applications: - Dyeing: For even application of dye or pigment on fabric. - Finishing: Applying finishes like softeners, water repellents, or flame retardants. - Chemical Treatments: Applying various chemicals used in textile manufacturing, such as anti-microbial treatments or stain-resistant solutions. - Shrinkage Testing: Simulating treatments to test fabric behavior under different conditions.   Benefits of Laboratory Padder:
    1. Precise Application of Chemicals - Provides uniform and controlled application of dyes, finishes, and other chemicals, ensuring consistent results.
    2. Small-Scale Testing - Ideal for small sample testing, allowing for fabric treatment without needing full-scale production equipment.
     
    1. Versatile Use - Suitable for dyeing, finishing, and applying various chemical treatments, making it a flexible tool for R&D labs.
    2. Cost-Effective - Reduces the need for large-scale machinery and the associated costs, while providing reliable results for small batches.
     
    1. Controlled Fabric Treatment - Offers adjustable pressure, speed, and solution concentration, enabling fine-tuned processing for different fabric types and applications.
    2. Accelerates Development - Speeds up the testing and development of new products or finishes, improving time-to-market for textile manufacturers.
    3. Energy Efficient - Consumes less energy compared to larger, industrial-scale machines, making it suitable for lab use.
    4. Compact and Space-Saving - Designed for laboratory environments with limited space, without compromising on functionality.
     
    1. Reproducible Results - Ensures consistent application of treatments across multiple samples, aiding in accurate testing and comparison.
      Features of Laboratory Padder:
    1. Adjustable Roller Pressure - Allows precise control over the pressure applied to the fabric, ensuring uniform chemical or dye application.
    2. Variable Speed Control - Adjustable conveyor speed for controlling the time the fabric spends in the solution bath, influencing the absorption rate.
     
    1. Solution Bath - Holds dye, chemicals, or finishes, and the fabric passes through this bath before moving to the rollers.
    2. Digital Control Panel - Easy-to-use interface for setting and adjusting parameters like speed, pressure, and solution concentration.
     
    1. Compact and Lab-Friendly Design - Designed for smaller, space-efficient use in textile labs, allowing for small sample testing.
    2. Roller Gap Adjustment - Allows for fine-tuning of the gap between rollers to regulate the amount of solution squeezed out of the fabric.
     
    1. Stainless Steel Construction - Durable and resistant to corrosion from the chemicals used in textile treatments.
    2. Safety Mechanisms - Includes safety guards, emergency stops, and user protection features during operation.
    3. Even and Controlled Application - Ensures even distribution of treatments (dye, finish, etc.) on fabric with minimal waste.
    4. Versatility in Application - Can be used for a wide range of textiles and treatments, including dyeing, softening, flame-retardant treatments, etc.
      How to Use a Laboratory Padder:
    1. Prepare the Fabric Sample - Cut the fabric sample to the required size for the experiment. Ensure it’s clean and free of any debris.
    2. Prepare the Solution - Mix the dye, chemical, or finish solution according to the desired concentration and the fabric's needs. Ensure that the solution is homogeneous.
     
    1. Set the Parameters - Pressure: Adjust the roller pressure based on the fabric type. Different fabrics require different pressure levels to ensure uniform application. - Speed: Set the fabric conveyor speed depending on the desired treatment time (longer exposure for deeper treatment).
    - Roller Gap: Adjust the roller gap to control the amount of liquid squeezed out from the fabric.  
    1. Load the Fabric into the Machine - Place the fabric carefully into the machine. The fabric should go through the solution bath and then pass between the rollers.
    2. Start the Machine - Turn on the machine and allow the fabric to pass through the rollers. The solution will be evenly applied to the fabric as it moves through the bath and is squeezed by the rollers.
     
    1. Monitor the Process - Keep an eye on the fabric to ensure it is being treated uniformly and there are no blockages or fabric jams.
    2. Unload the Fabric - Once the fabric has been treated, carefully remove it from the machine. Inspect for even application of the solution and any excess liquid.
     
    1. Dry or Process Further - Depending on the treatment, proceed with further steps such as drying, heat setting, or curing, as required by the experiment or process.
    Safety Tips:- Always wear appropriate personal protective equipment (PPE), such as gloves and goggles, when handling dyes or chemicals. - Ensure the machine is turned off and the rollers are stopped before attempting to remove or adjust the fabric.   Laboratory Padder dealer In Bangladesh, Lab Padder Importer in Bangladesh, Laboratory Padding mangle in Bangladesh, Laboratory Padding mangle in Bd, Laboratory Padder  Price in Bangladesh, Laboratory Padder in Bangladesh, Laboratory Padding mangle price in Bangladesh       Laboratory Padder
    Laboratory Padder

    Mini Lab Dyeing Padder

    Brand: DUNLIN Model:PM-A1 Origin: China Roller position: Vertical Rollers width :450mm Rollers diameter:125mm Rubbers hardness: 70degree shore Cloth speed: 0-10m/min Standard pressure: 0.6Mpa Retained dyestuff ratio: 40-80% Power supply: 1∮AC 220V 50/60HZ Dimensions (L x W x H):710 x 600x 1340mm Standard Accessories English manual Certificate of quality. Laboratory Padder Machine Dunlin price in Bangladesh Laboratory Padder Machine Dunlin in textile Textile testing equipment in Bangladesh Textile testing equipment in Dhaka Textile testing equipment in Uttara MAAM tex Laboratory Padder Machine Dunlin price in BangladeshLaboratory Padder
    Add to cart
    Quick view
    Digital Bench top PH Meter
    Digital Bench top PH Meter

    Digital Bench top PH Meter

    $0.00

    Digital Bench top PH Meter

    Digital Bench top PH Meter

    Digital Bench top PH Meter

    Brand: Hanna Model: HI2002 Country of Manufacture: Romania Origin: USA

    Digital Bench top PH Meter

    Single parameter of Digital Bench top PH Meter features user-friendly tablet design with bench, portable or wall mount options for ultimate flexibility. Switch from portable to bench in the same procedure or clear the surface for easier working and hang on the wall. Digital Bench top PH Meter Range -2.00 to 16.00pH; pH  Digital smart electrode compatible  Accuracy: ±0.01 pH edge® pH is dedicated to testing pH. Using Hanna's latest innovation in technology and design, edge® can be adapted to suit your working method. Select from hand held, wall mount or bench top - or switch between them all. edge® is happy any which way. Simply plug in the electrode, then play. Measurement is simpler, quicker and more accurate than ever. Results are fast and reliable. Combining high precision technology with the user-friendly dimensions and format of a small digital tablet, edge® is breaking new ground in electrochemistry. This is a must-have meter for your laboratory.
    pH Range basic mode: -2.00 to 16.00 pH; standard mode: -2.000 to 16.000 pH
     Resolution basic mode: 0.01 pH; standard mode: 0.001 pH
     Accuracy (@25°C) basic mode: ±0.01 pH; standard mode: ±0.002 pH
     Calibration basic mode: automatic, up to three points calibration, 5 standard buffers available; standard mode: automatic, up to five point calibration, 7 standard buffers available and two custom buffers
    Temperature Compensation automatic, -5.0 to 100.0°C (using integral temperature sensor)
    Electrode Diagnostics standard mode: probe condition, response time and out of calibration range
    mV pH Range ±1000 mV
     Resolution 0.1 mV
     Accuracy (@25°C) ±0.2 mV
    ORP Range ±2000 mV
     Resolution 0.1 mV
     Accuracy (@25°C) ±0.2 mV
    Temperature Range -20.0 to 120.0°C
     Resolution 0.1°C
     Accuracy ±0.5°C
    Additional Specifications:
     Probe HI-11310 digital glass body pH electrode with 3.5mm connector and 1m cable
     Logging up to 1000 (400 for basic mode) records organised in: manual log-on demand (max. 200 logs), manual log-on-stability (max. 200 logs), interval logging (max. 600 samples; 100 lots)
     Connectivity 1 USB port for storage; 1 micro USB port for charging and PC connectivity
     Environment 0 to 50°C; RH max 95% non-condensing
     Power Supply 5 VDC adapter (included)
     Dimensions 2020 x 140 x 12 mm
     Weight 250 g
    A Digital Bench Top pH Meter is a laboratory-grade instrument designed to measure the pH (acidity or alkalinity) of liquid samples with high precision. It's commonly used in research labs, industrial applications, environmental testing, and educational institutions. Key Features of a Digital Bench Top pH Meter
    1. High Accuracy and Resolution
    - Offers precise pH measurements, often with accuracy up to ±0.01 pH units. - Suitable for applications where exact pH control is critical.  
    1. Digital Display   - Large, clear LCD or LED screen shows pH readings, temperature, and sometimes mV or ion      concentration.   - Some models include a backlit display for better visibility.
     
    1. Electrode System   - Uses a pH-sensitive electrode (usually glass) connected to a reference electrode. Electrodes are often replaceable and require regular calibration and maintenance.
     
    1. Temperature Compensation - Automatic or manual temperature compensation to correct pH readings based on sample temperature.   - Integrated temperature sensors or separate probes are used.
    1. Calibration Functions   - Supports 2-point, 3-point, or multi-point calibration using standard buffer solutions.   - Auto-recognition of calibration buffers in advanced models.
    1. Data Storage and Connectivity   - Internal memory for storing results.   - USB or RS232 ports for data export to PCs or printers; some models support wireless connectivity.
    1. Sturdy Design   - Benchtop models are larger and more stable than portable meters.   - Often come with a durable casing and electrode arm for hands-free operation.
    Applications - Water quality testing (e.g., in wastewater treatment, drinking water monitoring) - Chemical and pharmaceutical industries - Food and beverage production - Biological and environmental research - Educational laboratories A Digital Bench Top pH Meter offers numerous benefits, making it a preferred choice in laboratory and industrial environments where accuracy, reliability, and ease of use are essential. Benefits of a Digital Bench Top pH Meter
    1. High Accuracy and Precision
    - Provides accurate and consistent pH readings, often with ±0.01 pH resolution. - Ideal for scientific and quality control applications where precise pH monitoring is critical.  
    1. User-Friendly Interface- Digital displays (LCD/LED) make readings easy to see and interpret.- Many models offer intuitive controls and guided calibration, simplifying operation.
     
    1. Advanced Calibration Features- Supports multi-point calibration for improved accuracy across a wide pH range.- Some models automatically recognize buffer solutions, reducing user error.
    1. Temperature Compensation- Automatic temperature compensation (ATC) corrects readings based on sample temperature, ensuring accuracy.
    1. Stable and Durable Design- Benchtop units are more robust and stable than handheld devices, reducing the risk of spills or tipping.- Often include electrode holders or arms for secure, hands-free measurements.
    1. Data Management and Connectivity- Built-in memory for storing measurement data.USB, RS232, or wireless connectivity for exporting data to computers or laboratory information systems (LIS).
    1. Multi-Functionality- Some models also measure ORP (oxidation-reduction potential), ion concentration, or conductivity.- Suitable for a variety of testing needs beyond just pH.
    1. Ideal for Long-Term Use- Designed for prolonged and repeated use in laboratory environments.- Replaceable electrodes and parts extend the meter’s usable life.
    1. Compliance and Documentation- Data logging features support documentation and compliance with regulatory standards in regulated industries (e.g., pharma, food, environmental testing).
     
    Add to cart
    Quick view
    Stretch Recovery Tester (Static Method)

    Stretch Recovery Tester Static Method

    ,
    $0.00

    Stretch Recovery Tester Static Method 

    Stretch Recovery Tester (Static Method)

    Stretch Recovery Tester

      A Stretch Recovery Tester Static Method is a lab instrument used to evaluate the stretch ability and recovery properties of fabrics, elastomers, or other stretchable materials. This method is crucial in textiles and material science to assess how well a material returns to its original shape after being stretched. Key Functions of Stretch Recovery Tester Static Method : - Measures elongation under a fixed force or length. - Assesses the recovery percentage after a specified recovery time once the force is removed. - Evaluates fabric's resilience, durability, and comfort properties. How It Works Stretch Recovery Tester  Static Method:
    1. A sample is stretched to a predetermined extension or force.
    2. The stretch is maintained for a set period.
    3. After removing the load, the recovery (return to original length) is measured after a fixed time.
    4. The fabric sample is clamped and stretched to a specific length or force.
    5. It’s held for a fixed duration (e.g., 1–5 minutes).
    6. The tension is released, and the sample is allowed to recover.
    7. The recovered length is measured after a set time.
    Main Components: - Fixed clamps to hold the sample. - Movable clamps for stretching. - Precision scale or ruler for measuring elongation and recovery. - Timing device (manual or digital) to control stretching and recovery periods. - To assess elastic recovery and dimensional stability after stretching. Applications: - Used in testing knitwear, sportswear, elastic fabrics, and compression garments. - Helps in product development and quality assurance. Stretch Recovery Tester Static Method is designed to determine the stretch recovery property of elastic material by static method. 2.0mm thickness stainless steel frame and base board, makes the tester firm and stable. Sample holder can be slid along the guide rail smoothly and can be fixed at any position of the rail. Test Scope：elastomeric material Testing Standards：ASTM D2594、ASTM D3107, etc. key features of a Stretch Recovery Tester Static Method: Adjustable clamps and measurement scale. - Timer for accurate stretch/recovery periods. - Simple mechanical design for ease of use. ✅ 1. Manual or Semi-Automatic Operation - Allows controlled stretching and recovery measurements. - Simple setup for routine quality control. ✅ 2. Adjustable Clamp System - Securely holds samples of various sizes and thicknesses. - Ensures consistent test conditions. ✅ 3. Precision Measurement Scale - Provides accurate readings of elongation and recovery length. - Often graduated in millimeters or inches. ✅ 4. Sturdy Frame - Made of corrosion-resistant metal or coated steel. - Ensures durability and stability during testing. ✅ 5. Time Control Support - Timer to monitor stretch and recovery durations. - Helps standardize test procedures. ✅ 6. Compact Design - Space-saving for lab environments. - Easy to move and operate. ✅ 7. Compliance with Standards - Often designed to meet standards like ASTM D3107 or BS 4294. Would you like a comparison with the dynamic method or specifications for a particular model? key benefits of using a Stretch Recovery Tester Static Method: ✅ 1. Accurate Fabric Performance Analysis- Provides reliable data on stretch and recovery, critical for assessing elasticity and fit. ✅ 2. Easy to Operate- Simple, manual setup makes it ideal for routine testing and quality control. ✅ 3. Cost-Effective- More affordable than dynamic testers, making it suitable for smaller labs or production units. ✅ 4. Standardized Testing- Supports industry-standard methods (e.g., ASTM D3107), ensuring consistency across tests. ✅ 5. Versatile Applications- Suitable for testing knit fabrics, elastic bands, spandex materials, and other stretchable textiles. ✅ 6. Durable and Low Maintenance- Mechanically straightforward with minimal upkeep required. ✅ 7. Enhances Product Development- Helps designers and manufacturers optimize materials for comfort, performance, and durability. Applications: - Textile R&D - Production quality control
    Stretch Recovery Tester (Static Method)

    Stretch Recovery Tester

    - Evaluating materials for comfort, durability, and fit Stretch Recovery Tester Diller In Bangladesh, Stretch Recovery Tester Importer In Bangladesh, Stretch Recovery Tester in Bangladesh, Stretch Recovery Tester in Bd, Stretch Recovery Tester In Uttara, Stretch Recovery Tester Price in Bangladesh, Stretch Recovery Tester Supplier in Bangladesh  
    Add to cart
    Quick view
    Counting Balance-Weighing Scale
    Counting Balance-Weighing Scale

    Counting Balance-Weighing Scale

    , ,
    $0.00

    Counting Balance-Weighing Scale

    Counting Balance-Weighing Scale

    Counting Balance-Weighing Scale

      A Counting Balance-Weighing Scale (or Counting Weighing Scale) is a precision electronic scale designed to weigh items and simultaneously count them based on individual piece weight. It’s commonly used in industries for inventory management, packaging, and quality control.   Purpose of Counting Balance-Weighing Scale: To quickly and accurately count small items like buttons, beads, screws, or pills by weight. Eliminates manual counting, especially for large quantities.   Working Principle of Counting Balance-Weighing Scale: Weigh a sample quantity of items to determine the average weight of one piece. Place a bulk quantity on the scale. The scale divides the total weight by the unit weight to calculate the total item count.     Applications of Counting Balance-Weighing Scale: Textile accessories (buttons, rivets) Hardware (nuts, bolts, washers) Electronics (resistors, chips) Pharmaceuticals (tablets, capsules) Benefits of Counting Balance-Weighing Scale:   Fast and Accurate Counting - Saves time by quickly counting large quantities of small items. Reduces Human Error- Eliminates mistakes common in manual counting. Improves Productivity - Speeds up packing, inventory, and quality control processes. Versatile Use - Suitable for various industries: textiles, hardware, pharmaceuticals, electronics.   Cost-Efficient- Reduces labor costs and improves operational efficiency. Compact and Portable - Easy to move and use in different workstations. Dual Functionality - Can be used for both counting and standard weighing. Memory and Tare Functions - Stores unit weights and allows container weight deduction.   Features of Counting Balance-Weighing Scale: High Precision Sensors- Ensures accurate weight and count, even for tiny components. Digital Display- Separate displays for total weight, unit weight, and piece count. Tare Function - Allows deduction of container weight for net measurements. Memory Function - Stores frequently used unit weights for fast recall.   Multiple Units Support- Measures in grams, kilograms, pounds, etc. Sample Size Selection- Users can set sample sizes (e.g., 10, 20, 50 pcs) to calculate piece weight. Overload Protection- Prevents damage from excessive weight. Auto Calibration - Maintains long-term accuracy with internal or external calibration options. Sturdy Platform- Stainless steel pan with anti-slip design for stable weighing. Battery and AC Operation- Can run on rechargeable batteries or power adapter.   How to Use Counting Balance-Weighing Scale: Turn On the Scale - Power it on and wait for the display to stabilize at zero. Tare the Container - Place an empty container on the pan and press the "TARE" button to zero out its weight. Set Sample Size - Place a known quantity (e.g., 10 or 20 pcs) of identical items on the scale. - Enter the sample quantity using the keypad. Confirm Unit Weight - The scale calculates and stores the average unit weight automatically. Add Bulk Items - Add the rest of the items into the container. - The display will show the total count based on the stored unit weight. Record Results   - Note down the total piece count and remove the items. Turn Off After Use - Power off the scale to save battery or electricity.     Counting Balance /Weighing Scale Model : DS610C Brand : DIGISCALE Origin : Germany Capacity : 3 kg Division : 0.1g Min Weight : 0.5g Grade : Class 3 Platter : 280 × 215mm Battery : Rechargeable Battery with AC Adaptor Display : Double Large LCD Display Warranty : One Year Service Warranty SPECIFICATION Build With 5 Measuring Units: kg, g, lb, oz, PCS Count Platter : 280 × 215mm Quality : Heavy Duty Premium Quality Product Net / Gross Weight : 3080g / 3130g Battery : Rechargeable Battery with AC Adaptor Battery Capacity: 6V 4.5Ah / 20 HR Adaptor Power Input : AC 220V-240V / 50Hz Adaptor Power Output : 10V DC/ 500mA Display : Double Large LCD Display Color : White-Gray Keyboard : 20 Members Key Operating Temperature : 0-40°C (32-104°F) FEATURES Auto Zero Tracking Automatic Overload Display Grade Class 3 Auto Backlight Double LCD Display Low Battery Indication Rechargeable Battery with Adaptor Save Electricity Advantage Piece Counting Functionality: The DS603C Counting Weighing Scale is prepared with an precise piece checking highlight, perfect for stock administration, generation lines, and quality control assignments. This guarantees you can tally things like screws, jolts, or other little components efficiently. High-Precision Digital Scale Display: The advanced scale show gives clear and precise readings, making it simple to screen weight and amount. Its shinning and natural interface guarantees ease of use in diverse lighting conditions. Digital Scale Calibration: To keep up exactness, the DS610C weighing scale calibration prepare is direct, guaranteeing the scale remains dependable over time. Normal weight scale calibration ensures reliable execution, indeed with overwhelming use. Durable and Reliable Build: The DS610C advanced weight scale is created with strong materials to withstand visit utilize in requesting situations, such as stockrooms and fabricating facilities. Versatility: As a weighing and tallying scale, it combines the benefits of weight estimation and piece tallying in one gadget. This makes it appropriate for a wide extend of applications, from retail to mechanical uses. Categories: Digital Scale and Balance, Piece Counting Scale, Table Top Scale
    Counting Balance-Weighing Scale

    Counting Balance-Weighing Scale

     
    Add to cart
    Quick view
    Digital Elmendorf Tearing Tester

    Digital Elmendorf tearing tester

    ,
    $0.00
    Digital Elmendorf Tearing Tester
    Digital Elmendorf Tearing Tester

    Digital Elmendorf Tearing Tester

      Digital Elmendorf Tearing Tester is a precision instrument used to measure the tear strength of materials like woven fabrics, paper, plastic films, and nonwovens. It determines how much force is required to continue tearing a pre-slit sample. Key Functions of Digital Elmendorf Tearing Tester: - Measures propagation tear resistance, not initial tear. - Uses a pendulum to apply force; the energy lost during tearing is calculated to determine tear strength. - Equipped with a digital display for direct reading of results in grams or millinewtons. Core Components: - Pendulum Arm: Applies tearing force. - Clamps: Secure the sample before and after the tear. - Cutting Blade: Creates a precise slit at the start of the test. - Digital Display Unit: Shows the tearing force result clearly and instantly. - Counterweights: Optional weights for increasing test range (for stronger materials).   Applications of Digital Elmendorf Tearing Tester: - Testing tear resistance of: - Textile fabrics (especially woven) - Paper and cardboard - Plastic films - Nonwovens - Packaging materials Benefits of Digital Elmendorf Tearing Tester:
    1. Accurate Tear Strength Measurement - Provides precise data on tear resistance, critical for quality control and product performance.
    2. Digital Readout - Easy-to-read display gives instant, reliable results without manual calculations.
    3. High Reproducibility - Ensures consistent test outcomes due to controlled tearing angle and speed.
     
    1. Fast Testing Process - Simple loading and quick test cycle increase lab efficiency.
    2. Suitable for Various Materials - Tests a wide range of flexible materials like textiles, paper, plastic, and packaging.
    3. Customizable Range - Use of optional weights extends the test range for low to high tear strength materials.
    4. Low Sample Waste - Requires small fabric or material samples, reducing waste during testing.
    5. Standards Compliance - Meets international testing standards (e.g., ASTM D1424, ISO 13937) for credibility and uniformity.
    Features of Digital Elmendorf Tearing Tester: Digital Display - Provides accurate and direct reading of tear strength in grams, mN, or cN. Pendulum Mechanism - Uses a swinging pendulum to simulate tear propagation with consistent force. Adjustable Test Range - Includes interchangeable pendulum weights to test various material strengths.
    1. Precision Sample Clamp - Securely holds samples in place to ensure accurate tear initiation.
    2. Pre-Cutting Blade - Integrated knife creates a precise initial slit in the sample before tearing.
    3. User-Friendly Interface - Simple buttons and screen navigation for ease of operation.
    4. Standard Test Compliance - Compatible with ASTM D1424, ISO 1974, ISO 13937, and other tear strength standards.
    1. Sturdy Construction - Made with durable materials for long-lasting performance and stable operation.
    2. Compact Design - Space-efficient footprint ideal for laboratory environments.
    3. Data Output Options- Some models offer USB or printer connectivity for result documentation.
    How to Use a Digital Elmendorf Tearing Tester:
    1. Prepare the Sample - Cut the material (fabric, paper, film, etc.) to standard size (typically 100 × 63 mm for textiles) and slit it with the pre-cutter as required.
    2. Select Pendulum Weight - Choose the appropriate pendulum or add counterweights based on expected tear strength.
    1. Calibrate the Machine - Set the pendulum to its starting position and zero the display.
    2. Clamp the Sample - Fix one half of the sample in the stationary clamp and the other in the moving clamp.
    3. Cut the Initial Slit - Use the integrated blade to make a precise cut at the marked slit area (usually 20 mm).
    1. Release the Pendulum - Trigger the pendulum to swing and tear the sample through the pre-slit.
    2. Read the Result - The digital display will show the tearing force automatically (in g, mN, or cN).
    3. Record or Export Data - Save or print the result if your model supports USB or printer connection.
    4. Reset for Next Test - Reposition the pendulum and prepare a new sample for the next cycle.
    Safety Tip: - Always ensure your hands are clear before releasing the pendulum.   Digital Elmendorf tearing tester Scope of application It is used for the determination of the tear resistance of various woven fabrics (Elmendorf method), and it can also be used for the determination of the tear resistance of thick paper, plastic sheeting, electrical tape, etc. Related standards GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734 etc. Instrument characteristics 1. Maximum 300N test range 2. Microcomputer control, digital decoding, support online communication 3. Color touch screen control, Chinese and English menu operation interface 4. Pneumatic clamping, automatic cutting 5. A variety of measurement units (cN, gf) selection 6. Fully automatic operation with safe operation protection. 7. Automatically increase potential energy [Technical parameter]: 1. Test range: first gear: (0～16)N second gear: (0～32)N third gear: (0～ 64)N fourth gear: (0～128)N fifth gear: (0～300)N 2. Test accuracy: ≤±0.2%F·S 3. Tearing length: 43mm (non-standard 30-60mm can be set) 4. Automatic incision length: (20±0.2)mm 5. Sample size: (100×63)mm 6. Specimen clamping: pneumatic way 7. Sample test: Up to 10 sets per group on the device side, and 30 sets of data can be selected to be saved 8. Power supply: AC220V±10% 50Hz 100W 9. Dimensions: (650×660×680)mm 10. Weight: 50kg [Sample of control interface]:(English version is also available.)
    Add to cart
    Quick view