Products
Martindale abrasion tester Updated
Tensile Strength Tester
Tensile Strength Tester
- Load Cell – Measures the force applied to the sample with high accuracy.
- Grips or Clamps – Hold the test sample firmly to prevent slippage during testing.
- Crosshead (Movable Arm) – Moves at a set speed to apply tension to the material.
- Digital Display or Software Interface – Shows real-time force, elongation, and stress-strain data.
- Multiple Test Modes – Supports tensile, compression, bending, and tearing tests depending on attachments.
- Adjustable Speed and Gauge Length – Customizable test settings to match standards like ASTM, ISO, or BIS.
- Accurate Strength Measurement – Precisely determines a material’s breaking point and load-bearing capacity.
- Quality Control – Ensures materials meet required strength standards before production or release.
- Improves Product Performance – Helps select suitable materials for durability, reducing product failure risks.
- Data for R&D – Provides key mechanical properties like tensile strength, elongation, and modulus for material development.
- Standard Compliance- Supports testing to international standards (e.g., ASTM, ISO), ensuring global quality benchmarks.
- Versatile Testing – Can test textiles, plastics, rubbers, metals, and composites with appropriate grips and settings.
- Increases Efficiency – Speeds up material evaluation with automated testing and data logging.
- Reduces Waste – Detects weak or faulty materials early, cutting down defective production.
- Supports Decision Making – Gives engineers and designers data to choose or improve materials confidently.
- High-Precision Load Cell – Accurately measures force applied to the sample, typically in Newton’s or kilograms.
- Digital Control Interface – Easy-to-use panel or software for setting test parameters and viewing results.
- Adjustable Crosshead Speed – Customizable speed for stretching the sample to match different material standards.
- Interchangeable Grips – Various clamps for fabrics, yarns, plastics, or metals depending on the test material.
- Automatic Data Recording – Captures force, elongation, and break point for analysis and documentation.
- Graph Plotting Capability – Displays real-time stress-strain curves for detailed evaluation.
- Multiple Test Modes – Supports tensile, compression, tear, peel, and bending tests.
- Standard Compliance – Configurable to perform tests according to ASTM, ISO, or BIS standards.
- Safety Features- Includes overload protection and emergency stop for safe operation.
- Robust Frame Design- Rigid construction for stability and accurate testing, even at high loads.
- Prepare the Sample – Cut the material to standard size and shape based on test requirements (e.g., ASTM, ISO).
- Select Appropriate Grips – Choose clamps suitable for the material type (e.g., flat grips for fabric, V-grips for yarn).
- Mount the Sample- Secure both ends of the sample between the upper and lower grips. Make sure it is centered and tight to avoid slippage.
- Set Test Parameters
- Zero the Machine – Calibrate the load cell and crosshead to start from zero force and zero position.
- Start the Test – Press “Start” to begin. The machine will stretch the sample until it breaks, measuring force and elongation.
- Monitor the Test – View live data on force, elongation, and stress-strain curve if available.
- Review and Save Results – After the break, the machine stops. View and save the data (tensile strength, elongation at break, modulus).
- Remove Sample and Clean Up – Dispose of the broken sample and clean grips if needed.
Tensile Strength Tester
[Scope of application]:
It is used to test the fuzzing and pilling
performance of the fabric under the condition of
free rolling and friction in the drum.
[Related standards]:
GB/T4802.4 (Standard Drafting Unit)
ISO12945.3, ASTM D3512, ASTM D1375, DIN 53867, ISO 12945-3, JIS L1076, etc.
[Technical parameter]:
1. Number of boxes: 4
2. Roller specifications: diameter (146±1.0) mm, depth (152.4±1.0) mm;
3. Lining material: polychloroprene lining thickness (3.2±0.4) mm. , Hardness (60～70)
IRHD;
4. Impeller specifications: φ12.7 mm×120.6 mm;
5. Plastic blade specifications: 10 mm×65 mm;
6. Rotation speed: 1～2400 rpm can be set freely
7. Working pressure: 14kPa～21kPa;
8. Time counting: (1～999) min.
9. Power supply: AC220V±10% 50Hz 80W
10. Appearance: (480×400×680)mm
11. Weight: 40kg
[Standard accessories]
Items and specifications Qty. Note
Fuse 2 3A
Main machine 1
Power cable 1
Air tube 1 Φ8mm
Grey cotton sliver 4
Cork lining 4
Rating sample photo 1
White glue 1
