Spray Rating Tester
Spray Rating Tester
360 product view
    Click to enlarge
    Spray Rating Tester
    Spray Rating Tester
    Xenon Arc Light Fastness Tester
    Xenon Arc Light Fastness Tester $0.00
    Back to products
    Martindale abrasion tester updated
    Martindale abrasion tester Updated $0.00

    Spray Rating Tester

    $0.00

    Spray Rating Tester

    Spray Rating Tester

    Spray Rating Tester

     

    The Spray Rating Tester is a textile testing instrument used to evaluate the water resistance or water repellency of fabric surfaces. It measures how well a fabric can resist wetting when exposed to a controlled spray of water, helping assess its performance in rain or damp conditions.

     

    Purpose of Spray Rating Tester

    – To assess surface wetting resistance of textiles.

    – Commonly used for outdoor clothing, rainwear, tents, and performance fabrics.

     

    Working Principle of Spray Rating Tester

    – A fabric specimen is mounted at a 45° angle.

    – Water is sprayed from a standard nozzle for a specific time.

    – After spraying, the fabric is visually rated based on the appearance of water drops and wetting.

     

    Key Components of Spray Rating Tester

    – Spray Nozzle: Delivers a consistent, standard water spray.

    – Funnel & Reservoir: Controls the flow and volume of water.

    – Specimen Holder: Positions the fabric at a 45° angle.

    – Spray Stand: Ensures accurate nozzle height and positioning.

     

    Standards Used of Spray Rating Tester

    – AATCC 22

    – ISO 4920

    – BS EN 24920

     

    Applications of Spray Rating Tester

    – Rainwear and water-resistant textiles.

    – Quality control in fabric finishing.

    – R&D for performance apparel.

     

    Benefits of Spray Rating Tester:

    1. Quick and Simple Evaluation – Offers a fast way to assess fabric water repellency without complex setup.
    2. Standardized Testing- Complies with AATCC 22 and ISO 4920, ensuring globally accepted results.
    3. Cost-Effective- Low maintenance and no power requirement make it economical for routine lab use.

     

    1. Improves Fabric Performance – Helps manufacturers develop or improve water-resistant textiles.
    2. Non-Destructive Test – Does not damage the fabric, allowing for additional tests on the same sample.
    3. Visual Grading- Easy to interpret using a standard spray rating chart (0 to 100 scale).
    4. Supports Quality Control – Detects finish degradation or variation in water-repellent treatments.
    5. Portable and Compact- Lightweight design allows easy use in various lab or field settings.

     

    Features of Spray Rating Tester:

    1. Standardized Spray Nozzle – Delivers consistent water spray per AATCC and ISO specifications.
    2. 45° Specimen Mounting Angle – Ensures uniform test setup for accurate and repeatable results.
    3. Stainless Steel or Aluminum Frame – Corrosion-resistant and durable for long-term use with water exposure.

     

    1. Water Reservoir and Funnel System – Provides precise water volume (usually 250 ml) for each test.
    2. Graduated Spray Stand- Fixed height (150 mm above specimen) for controlled spray impact.
    3. Detachable Specimen Holder- Easy loading and removal of fabric samples.
    4. Compact and Lightweight Design – Portable and convenient for both lab and field testing.
    5. No Electricity Required – Fully manual operation increases reliability and reduces operating costs.

     

    How to Use Spray Rating Tester:

    1. Prepare the Sample – Cut fabric to standard size (usually 180 × 180 mm). – Condition the sample if required (21°C, 65% RH for 24 hours).
    2. Mount the Fabric – Place the fabric on the specimen holder at a 45° angle.
    3. Fill the Reservoir – Pour 250 ml of distilled water into the upper funnel.

     

    1. Start the Test – Release the water through the nozzle; it sprays over the fabric for about 25–30 seconds.
    2. Inspect the Fabric – After spraying, visually assess the water beading or penetration on the surface.
    3. Rate the Sample – Compare the fabric’s wetting pattern with the standard spray rating chart: – 100 = No sticking/wetting – 90–50 = Partial wetting – 0 = Complete wetting
    4. Record the Rating – Document the spray rating for quality control or reporting.

     

    Spray Rating Tester,
    Water Repellency Tester
    Spray Reting Tester

    [Scope of application]:
    Used for the determination of moisture resistance (wetting grade) of various fabrics
    which have been or have not been treated with water resistance or water repellency.
    [related standards]:
    GB/T4745 ISO4920 AATCC22 JISL1092 etc.
    [technical parameters]:
    1. Glass funnel:150 x 150 (capacity 500ml)
    2. Specimen placement angle:The level is 45 degrees.
    3. Distance from nozzle to sample center:150mm
    4. Specimen diameter:Ф150mm
    5. Size of water receiving pan:500×400×30mm
    6. Matching measuring cups:500ml
    7, size 500 x 400 x 500mm
    8. Instrument weight:5Kg

    Category: Tags: , , , , Brand: ,
    Description

    Spray Rating Tester

    Spray Rating Tester

    Spray Rating Tester

     

    The Spray Rating Tester is a textile testing instrument used to evaluate the water resistance or water repellency of fabric surfaces. It measures how well a fabric can resist wetting when exposed to a controlled spray of water, helping assess its performance in rain or damp conditions.

     

    Purpose of Spray Rating Tester

    – To assess surface wetting resistance of textiles.

    – Commonly used for outdoor clothing, rainwear, tents, and performance fabrics.

     

    Working Principle of Spray Rating Tester

    – A fabric specimen is mounted at a 45° angle.

    – Water is sprayed from a standard nozzle for a specific time.

    – After spraying, the fabric is visually rated based on the appearance of water drops and wetting.

     

    Key Components of Spray Rating Tester

    – Spray Nozzle: Delivers a consistent, standard water spray.

    – Funnel & Reservoir: Controls the flow and volume of water.

    – Specimen Holder: Positions the fabric at a 45° angle.

    – Spray Stand: Ensures accurate nozzle height and positioning.

     

    Standards Used of Spray Rating Tester

    – AATCC 22

    – ISO 4920

    – BS EN 24920

     

    Applications of Spray Rating Tester

    – Rainwear and water-resistant textiles.

    – Quality control in fabric finishing.

    – R&D for performance apparel.

     

    Benefits of Spray Rating Tester:

    1. Quick and Simple Evaluation – Offers a fast way to assess fabric water repellency without complex setup.
    2. Standardized Testing- Complies with AATCC 22 and ISO 4920, ensuring globally accepted results.
    3. Cost-Effective- Low maintenance and no power requirement make it economical for routine lab use.

     

    1. Improves Fabric Performance – Helps manufacturers develop or improve water-resistant textiles.
    2. Non-Destructive Test – Does not damage the fabric, allowing for additional tests on the same sample.
    3. Visual Grading- Easy to interpret using a standard spray rating chart (0 to 100 scale).
    4. Supports Quality Control – Detects finish degradation or variation in water-repellent treatments.
    5. Portable and Compact- Lightweight design allows easy use in various lab or field settings.

     

    Features of Spray Rating Tester:

    1. Standardized Spray Nozzle – Delivers consistent water spray per AATCC and ISO specifications.
    2. 45° Specimen Mounting Angle – Ensures uniform test setup for accurate and repeatable results.
    3. Stainless Steel or Aluminum Frame – Corrosion-resistant and durable for long-term use with water exposure.

     

    1. Water Reservoir and Funnel System – Provides precise water volume (usually 250 ml) for each test.
    2. Graduated Spray Stand- Fixed height (150 mm above specimen) for controlled spray impact.
    3. Detachable Specimen Holder- Easy loading and removal of fabric samples.
    4. Compact and Lightweight Design – Portable and convenient for both lab and field testing.
    5. No Electricity Required – Fully manual operation increases reliability and reduces operating costs.

     

    How to Use Spray Rating Tester:

    1. Prepare the Sample – Cut fabric to standard size (usually 180 × 180 mm). – Condition the sample if required (21°C, 65% RH for 24 hours).
    2. Mount the Fabric – Place the fabric on the specimen holder at a 45° angle.
    3. Fill the Reservoir – Pour 250 ml of distilled water into the upper funnel.

     

    1. Start the Test – Release the water through the nozzle; it sprays over the fabric for about 25–30 seconds.
    2. Inspect the Fabric – After spraying, visually assess the water beading or penetration on the surface.
    3. Rate the Sample – Compare the fabric’s wetting pattern with the standard spray rating chart: – 100 = No sticking/wetting – 90–50 = Partial wetting – 0 = Complete wetting
    4. Record the Rating – Document the spray rating for quality control or reporting.

     

    Spray Rating Tester,
    Water Repellency Tester
    Spray Reting Tester

    [Scope of application]:
    Used for the determination of moisture resistance (wetting grade) of various fabrics
    which have been or have not been treated with water resistance or water repellency.
    [related standards]:
    GB/T4745 ISO4920 AATCC22 JISL1092 etc.
    [technical parameters]:
    1. Glass funnel:150 x 150 (capacity 500ml)
    2. Specimen placement angle:The level is 45 degrees.
    3. Distance from nozzle to sample center:150mm
    4. Specimen diameter:Ф150mm
    5. Size of water receiving pan:500×400×30mm
    6. Matching measuring cups:500ml
    7, size 500 x 400 x 500mm
    8. Instrument weight:5Kg

      Shipping & Delivery

      Related products

      Fabric Drape Tester
      Fabric Drape Tester

      Fabric drape tester

      $0.00
      Fabric Drape Tester
      Fabric Drape Tester

      Fabric Drape Tester

        Fabric Drape Tester is a lab device used to measure the drape ability of fabric—how it hangs under its own weight. It assesses how fabric conforms in folds or waves, which affects garment appearance and comfort.   Purpose of Fabric Drape Tester: To evaluate the aesthetic and functional behavior of a fabric when suspended, especially important in apparel and home textiles.   Working Principle: A circular fabric specimen is placed over a smaller disc. The unsupported edges drape downward. A light source casts a shadow of the draped shape onto a recording surface or scanner. The area of the shadow is measured to calculate the drape coefficient.   Main Components of Fabric Drape Tester: - Rotating Support Disc: Holds the fabric. - Light Source: Projects the drape shadow. - Paper or Digital Scanner: Captures the drape outline. - Template: For cutting fabric to standard test size. - Software or Plan meter: Calculates the drape coefficient.   Applications of Fabric Drape Tester: - Fashion and apparel design - Fabric development - Quality control in woven, knitted, or nonwoven fabrics   Benefits of Fabric Drape Tester:
      1. Quantifies Fabric Flow - Measures drape behavior accurately, crucial for garments and furnishings.
      2. Supports Design Decisions - Helps designers select fabrics that match the intended look and movement of a product.
      3. Improves Garment Fit and Comfort - Ensures fabrics behave naturally on the body, enhancing wear ability.
       
      1. Enhances Product Aesthetics - Prevents stiff or limp fabric choices in fashion, interior, or technical textiles.
      2. Standardized Evaluation - Enables comparison across fabrics using drape coefficient, based on standards (e.g., BS 5058).
      3. Supports R&D - Useful in developing new fabrics or finishes to improve drape quality.
       
      1. Non-Destructive Testing - Tests fabric without damaging it, allowing for further analysis.
      2. Boosts Quality Control - Identifies batch inconsistencies or performance issues early in production.
        Features of Fabric Drape Tester:
      1. Rotating Support Disc - Holds the fabric sample over a smaller disc to create natural drape.
      2. Standard Sample Size Support - Designed for circular fabric samples, usually 30 cm in diameter.
      3. Light Projection System - Projects the draped fabric’s shadow onto a screen or recording surface.
       
      1. Drape Coefficient Calculation - Measures the shadow area to compute the drape coefficient (percentage of unsupported area covered by the shadow).
      2. Digital or Manual Options - Available in models with digital image processing or manual plan meter tracing.
      3. Stable Base and Structure - Ensures consistent and vibration-free testing conditions.
       
      1. Sample Templates Provided - For cutting precise, standard-sized fabric specimens.
      2. User-Friendly Interface - Simple controls for rotation and light alignment.
      3. Compact and Lab-Ready Design - Fits easily on lab benches and in testing environments.
      4. Compliance with Testing Standards - Supports BS 5058 and other relevant drape measurement methods.
        How to Use Fabric Drape Tester:
      1. Prepare the Fabric Sample - Cut a circular fabric sample, typically 30 cm in diameter, using the provided template.
      2. Place the Fabric - Center the fabric sample over the smaller support disc (usually 18 cm diameter) on the tester.
      3. Turn on the Light Source - Illuminate the fabric from above so it casts a shadow onto the recording surface or paper below.
       
      1. Capture the Shadow Outline - Trace the shadow manually on paper or capture it digitally, depending on the model.
      2. Measure the Shadow Area - Use a plan meter (manual) or software (digital) to determine the shadow’s area.
      3. Calculate Drape Coefficient (DC) - Use the formula:
      DC (%) = (Shadow Area - Support Disc Area) / (Full Fabric Area - Support Disc Area) × 100  
      1. Record the Result - Log the drape coefficient to evaluate how stiff or flexible the fabric is.
      2. Repeat for Accuracy - Test multiple samples and average the results for consistency.
          fabric drape tester Scope of application It is used for testing dynamic and static drape properties (drape coefficient, shape change rate, surface ripple and drape uniformity, etc.) of various fabrics. Related standards GB/T23329 FZ/01045 BS5058 etc. Instrument characteristics 1. CCD imaging, dynamic and static image processing. 2. A variety of charts and data statistics, analysis, storage, output 3. No need to replace background color, can test all kinds of color samples. 4. Work mode:Microcomputer control, CCD imaging, automatic processing of images and data automatically. Technical parameters 1. Communication interface: RS232, USB 2. Image sensor: CCD sensor. 3. Static (dynamic) state draping coefficient: 0 ~ 100% + 2 4. Drapability uniformity: 0 ~ 100% + 2 5. The rate of morphological change is 0 to 100% + 2. 6. Surface waviness error: + 1
      Add to cart
      Quick view
      Laboratory Hydro Extractor
      Laboratory Hydro Extractor

      Laboratory hydro Extractor

      $0.00

      Laboratory Hydro Extractor

      Laboratory Hydro Extractor

      Laboratory Hydro Extractor

        A Laboratory Hydro Extractor is a compact, high-speed centrifuge used in textile labs to remove excess water from fabric or yarn samples after dyeing or washing. It works on the principle of centrifugal force, efficiently reducing moisture content before drying. Key Features:
      1. Centrifugal Water Extraction - Uses high-speed spinning (typically 1400–2800 RPM) to extract water from textiles.
      2. Stainless Steel Inner Basket - Perforated drum holds fabric/yarn securely and allows water to drain efficiently.
       
      1. Compact Lab Design - Space-saving unit designed specifically for laboratory sample sizes.
      2. Digital Timer and Speed Control - Allows precise setting of spin duration and RPM to match sample needs.
      3. Safety Lock System - Ensures the lid remains closed during operation for user safety.
       
      1. Quick Water Removal - Significantly reduces drying time by extracting up to 90–95% of water content.
      2. Low Noise and Vibration - Balanced design ensures quiet and stable operation.
        Applications: - Dewatering of dyed or washed fabric/yarn lab samples. - Pre-drying step in dyeing and finishing tests. - Useful in textile, apparel, and dyeing labs for faster workflow.   Benefits of Laboratory Hydro Extractor:
      1. Efficient Water Removal - Rapidly extracts 90–95% of water from samples, reducing drying time significantly.
      2. Saves Time and Energy - Cuts down the load on dryers and shortens total processing time in lab workflows.
      3. Improves Sample Quality - Gentle spinning preserves fabric structure, avoiding damage or distortion.
       
      1. Precise Control - Adjustable speed and timer ensure optimal settings for different fabric types.
      2. Compact and Lab-Friendly - Small footprint ideal for laboratory use with limited space.
      3. User Safety - Safety lock prevents lid opening during operation, protecting the user.
      4. Cost-Effective - Reduces the need for extended dryer use, saving on electricity and equipment wear.
       
      1. Versatile Use - Suitable for yarn, fabric, and garment samples across various fiber types.
      Features of Laboratory Hydro Extractor:  
      1. High-Speed Centrifugal Operation - Typically runs at 1400–2800 RPM for quick and efficient water removal.
      2. Stainless Steel Inner Drum - Corrosion-resistant, perforated basket for durability and efficient water drainage.
      3. Digital Timer and Speed Control - Allows precise control of spin duration and speed based on sample type.
       
      1. Compact and Portable Design - Ideal for lab environments with limited space.
      2. Safety Lock Mechanism - Prevents the lid from opening while the machine is in operation.
      3. Shock Absorption System- Reduces vibration and noise for smooth, stable performance.
       
      1. Quick Cycle Times - Short dewatering cycles improve lab throughput and efficiency.
      2. Low Maintenance Design - Simple mechanical setup with easy-to-clean components.
      3. Sample Versatility - Suitable for small fabric swatches, yarns, and small garments.
      4. Energy Efficient - Uses minimal power while delivering high performance.
      How to Use a Laboratory Hydro Extractor:
      1. Prepare the Sample - After dyeing or washing, gently squeeze excess water from the fabric or yarn sample by hand.
      2. Load the Sample - Open the lid and place the sample evenly in the stainless steel drum. - Avoid overloading or uneven placement to maintain balance.
       
      1. Close the Lid securely - Ensure the safety lid is properly closed and locked.
      2. Set the Timer and Speed - Use the control panel to set the spin time (typically 1–5 minutes) and RPM suitable for the sample type.
      3. Start the Machine- Press the start button. The extractor will spin at the selected speed to remove water via centrifugal force.
       
      1. Wait for Spin Completion - The machine will automatically stop after the timer runs out.
      2. Unload the Sample - Once the drum stops completely, open the lid and carefully remove the sample.
      3. Proceed to Drying - The dewatered sample can now be air-dried or placed in a drying oven or stenter.
        Safety Tips: - Always ensure the lid is closed before starting. - Do not open the lid while the drum is spinning. - Balance the load to prevent vibration or noise.     Laboratory Hydro Extractor dealer In Bangladesh, Lab Hydro Extractor Importer in Bangladesh, Laboratory Hydro  in Bangladesh, Lab Hydro  in Bd, Hydro Extractor Price in Bangladesh, Laboratory Hydro Extractor in Bangladesh,   Laboratory hydro Extractor Small Dehydrator Model: DUN-SD185 Brad: DUNLIN Origin: China Application scope of small dehydrator: This dehydrator is a kind of small sample dehydration experimental equipment with micro capacity Parameter specification: Inner barrel size: 185mm in diameter * 80Hmm Outer barrel size: ∮200*125Hmm Overall dimension: 290 * 220* 295Hmm Power supply: single phase 220 V / 50 Hz power: 60 W speed: 1800 R / min

      Laboratory hydro Extractor Machine Dunlin price in Bangladesh Laboratory hydro Extractor Machine Dunlin in textile Textile testing equipment in Bangladesh Textile testing equipment in Dhaka Textile testing equipment in Uttara MAAM tex Laboratory hydro Extractor Machine Dunlin price in Bangladesh

      Laboratory hydro Extractor
      Add to cart
      Quick view
      Fabric Flame Retardant Tester

      Fabric flame retardant tester

      ,
      $0.00
      Fabric Flame Retardant Tester
      Fabric Flame Retardant Tester

      Fabric Flame Retardant Tester

        A Fabric Flame Retardant Tester is a specialized laboratory instrument designed to evaluate the flammability characteristics of textiles. It assesses how fabrics react to direct flame exposure, measuring parameters such as ignition time, flame spread rate, after-flame duration, and afterglow time. This testing is crucial for ensuring that textiles meet safety standards for various applications, including apparel, home furnishings, and industrial uses.   Purpose and Applications The primary purpose of a Fabric Flame Retardant Tester is to determine the flame resistance of textile materials. This is essential for:- Apparel Safety: Ensuring garments, especially children's sleepwear and industrial work wear, meet flammability standards. - Home Textiles: Testing curtains, drapes, upholstery, and bedding for fire safety compliance. - Technical Textiles: Evaluating materials used in tents, protective clothing, and automotive interiors.   ⚙️ Key Features Modern Fabric Flame Retardant Testers incorporate several features to ensure accurate and reliable testing:- Adjustable Burner Angles: Allowing tests at various orientations (e.g., 0°, 45°, 90°) to simulate different real-world scenarios. Automated Ignition Systems: Providing consistent flame application and reducing operator variability. - Digital Timing Mechanisms: Accurately recording ignition time, flame spread, after-flame, and afterglow durations.   - Transparent Observation Windows: Enabling safe monitoring of the test without exposure to hazards. - Compliance with International Standards: Meeting protocols such as ASTM D6413, ISO 6941, and EN ISO 15025 for standardized testing procedures.   Testing Standards Fabric Flame Retardant Testers are designed to comply with various international standards, including: - ASTM D6413: Standard Test Method for Flame Resistance of Textiles (Vertical Test). - ISO 6941: Textiles — burning behavior — Measurement of flame spread properties of vertically oriented specimens. - EN ISO 15025: Protective clothing — Protection against heat and flame — Method of test for limited flame spread.   ️ How It Works
      1. Sample Preparation: A fabric specimen is cut to specified dimensions and conditioned as per standard requirements.
      2. Mounting: The sample is mounted vertically or at a specified angle in the testing chamber.
      3. Ignition: A controlled flame is applied to the fabric for a predetermined time.
      4. Observation: The tester records ignition time, flame spread, after-flame time, and afterglow time.
      5. Evaluation: Results are compared against standard criteria to determine compliance.
          ✅ Benefits - Safety Assurance: Ensures textiles meet fire safety regulations, reducing risk in end-use applications. - Quality Control: Identifies flammability issues during the manufacturing process. - Regulatory Compliance: Helps manufacturers meet legal requirements for flammability. - Product Development: Assists in developing flame-retardant materials for specialized applications.   For more detailed information on specific models and their features, you can refer to manufacturers like SDL Atlas's Auto Flam Flammability Tester [1], TESTEX's Vertical Flammability Chamber TF312   How to Use a Fabric Flame Retardant Tester (Vertical Flammability Test Method):
      1. Prepare the Sample
      - Cut the fabric to standard dimensions (usually 300 × 75 mm). - Condition the fabric for 24 hours at 21°C and 65% relative humidity.  
      1. Mount the Sample
      - Place the fabric vertically in the frame inside the test chamber. - Ensure it's held securely with no folds or slack.  
      1. Set Up the Burner Position the burner at the required angle (usually 90° for vertical tests).
      - Adjust flame size according to the standard (about 38 mm for ASTM D6413).
      1. Ignite the Flame - Apply the flame to the bottom edge of the fabric for 12 seconds.
       
      1. Observe and Measure - Start timing when flame is applied.
      - Measure: - After-flame time (how long it burns after flame removal) - After-glow time (how long it glows after burning stops) - Char length (distance burned vertically)  
      1. Record the Results
      - Repeat the test on multiple samples (usually 5) and calculate averages.  
      1. Compare with Standards
      - Evaluate whether the results meet the required flame resistance limits.     fabric flame retardant tester IV type (small 450 method) Scope of application It is used for testing the intensity and speed of burning of flammable textile materials after ignition. (specific ignition nozzles and sample holders can be customized to meet multiple criteria). Related standards GB/T14644 ASTM D1230 CFR1610 etc. Technical parameters 1. The spread of time:0 ~ 999.9S resolution 0.1S 2. The temperature inside the box shows:Room temperature -99 degrees C resolution 1 c 3. Igniting time:1S 4. Type of igniter:4 1/2 syringe 5. Sample clip size:Outer frame:204mm * 78mm inner frame:152mm×38mm 6. Distance from the top of the igniter to the sample surface:8mm 7. Studio size and outline size Studio size:370mm×220mm×350mm Outline size:375mm×245mm×478mm 8. Power supply:AC220V 50Hz 20W 9. Weight:18Kg  
      Add to cart
      Quick view
      Automatic Bobbin Hydro extractor
      Automatic Bobbin Hydro extractor

      Automatic Bobbin Hydro extractor

      $0.00
      Automatic Bobbin Hydro extractor
      Automatic Bobbin Hydro extractor

      Automatic Bobbin Hydro extractor

        An Automatic Bobbin Hydro extractor is a high-speed centrifugal machine used in textile dyeing units to remove excess water from yarn bobbins after dyeing. It operates by spinning the bobbins at high speed, extracting water via centrifugal force, significantly reducing drying time.   Purpose of Automatic Bobbin Hydro extractor: To dewater dyed yarn bobbins quickly and efficiently before final drying.   Applications of Automatic Bobbin Hydro extractor: Textile dye houses Cone and bobbin dyeing units Pre-drying in yarn processing   Working Principle of Automatic Bobbin Hydro extractor: Dyed bobbins are loaded into perforated baskets. The machine spins rapidly, forcing water outwards and draining it away. Automatic controls manage cycle time, speed, and safety functions.   Benefits of Automatic Bobbin Hydro extractor: Fast Water Removal - Greatly reduces moisture content before drying, saving energy. Gentle on Yarn - Designed to avoid damage or deformation of soft dyed bobbins. Labor-Saving Operation - Fully automatic with programmable cycles for ease of use. Shortens Drying Time - Cuts drying time in hot air or RF dryers significantly.   Improves Production Efficiency - Speeds up workflow in dyeing and finishing processes. Reduces Manual Handling - Often includes hydraulic or pneumatic lifting for easy bobbin loading/unloading.   Features of Automatic Bobbin Hydro extractor: High-Speed Stainless Steel Drum - Rust-resistant and built for stable, high-speed spinning. PLC or Digital Controller - For setting speed, time, and safety interlocks. Soft Start & Stop Function - Protects yarn and machine from sudden movement or shock. Automatic Lid Locking System - Ensures safety during operation.   Efficient Drainage System - Quickly removes expelled water to drain line. Vibration-Free Design - Balanced system reduces noise and mechanical wear.   How to Use Automatic Bobbin Hydro extractor: Prepare Bobbins - Ensure dyed bobbins are properly packed and free of loose ends. Load the Machine - Open the lid and place bobbins evenly inside the perforated drum.     - Avoid overloading to maintain balance during spinning.   Close and Lock Lid - Securely close the lid; the automatic locking system will engage.   Set Parameters- Use the control panel to set spinning speed and time according to yarn type. Start the Cycle - Press start; the machine will gradually accelerate to the preset speed. Monitor Operation - The machine runs, extracting water by centrifugal force.   Cycle Completion - After the set time, the machine slows down and stops automatically. Unload Bobbins - Open the lid once unlocked and carefully remove the hydro-extracted bobbins. Clean the Machine - Remove any residual water or lint from the drum after use.   Maintenance Tips for Automatic Bobbin Hydro extractor: Daily: ☐ Clean the drum and interior to remove lint and water residues ☐ Check lid locking mechanism for smooth operation ☐ Inspect drain pipes for clogging   Weekly: ☐ Lubricate moving parts as per manufacturer instructions ☐ Inspect belt or motor coupling for wear ☐ Test safety interlocks and emergency stop   Monthly: ☐ Check electrical wiring and control panel for damage ☐ Balance drum if vibrations are noticeable ☐ Tighten all bolts and fasteners   Safety Tips: ☐ Always ensure the lid is properly locked before starting ☐ Do not overload the drum to avoid imbalance and damage ☐ Keep hands and loose clothing clear of moving parts ☐ Use emergency stop in case of abnormal noise or vibration ☐ Turn off power before cleaning or maintenance   Automatic Bobbin Hydro extractor Maintenance Checklist Daily: ☐ Clean drum and interior from lint & water ☐ Check lid locking mechanism ☐ Inspect drain pipes for clogging   Weekly: ☐ Lubricate moving parts as per manual ☐ Inspect belt/motor coupling for wear ☐ Test safety interlocks & emergency stop   Monthly: ☐ Check electrical wiring and control panel ☐ Balance drum if vibration occurs ☐ Tighten bolts and fasteners   Safety Checklist ☐ Confirm lid is locked before operation ☐ Avoid overloading drum ☐ Keep hands & loose clothing away from moving parts ☐ Use emergency stop if needed ☐ Power off before cleaning or maintenance   TECHNICAL DATA OF THE MACHINE
      • Computer system: Foshan HuaGao Chinese English computer, equipped with LG PLC.
      • Electromagnetic valve: Ningbo Jiaerling
      • Frequency converter: Use Made in China frequency converters.
      • Pump: self-made high head and large flow centrifugal water pump.
      • Main pump motor: Anhui Wannan Motor.
       
      • Master cylinder liquid level: Use 4-20mA analog signal output.
      • Level of deputy temporary worker: use foam water level gauge. (American Mike)
      • Temperature detection and display: digital temperature display instrument, dual temperature measuring probes.
      • The safety system has a triple cylinder head safety interlock mechanism, and the main cylinder is equipped with a stainless
      • steel safety valve.
      • Heat exchanger: external spacer heating.
      • Feeding system: Quantitative feeding based on the process curve.
       
      • Circulation system: The main pump flows internally and externally, which is automatically controlled by a computer or manually controlled by a relay.
      • Valves: Y valves are used for heating, stainless steel Y valves are used for single inlet and single row, and other Y valves are produced by joint ventures.
      • Temperature control: on-off temperature control, controlled by a computer, with automatic heating, cooling, and insulation functions.
      • Dyeing method: air cushion type.
      • Opening method: manual opening.
      • Surface treatment: polishing inside and outside the cylinder.
      • Cage: Each dyeing machine is equipped with butterfly blades and self-locking locks.
       
      • Body plate: high-quality stainless steel. (S31603)
      • Bath ratio: 1:5-1:6
      • Chemical material system: including heating and water adding functions, including overflow type salt melting device.
      • Overflow cleaning: The cleaning port is installed on the upper part of the cylinder port, and the bottom of the cylinder is filled with water, while the cylinder is drained for easy cleaning.
      • Commutation method: Novel "U" type commutation.
      • Random accessories: Each model comes with one set of mechanical seals, pot mouth rings, and reversing seals for the main and auxiliary pumps.
        Automatic Bobbin Hydro extractor

        Automatic Bobbin Hydro extractor

      Add to cart
      Quick view
      Xenon Arc Light Fastness Tester
      Xenon Arc Light Fastness Tester

      Xenon Arc Light Fastness Tester

      $0.00
      Xenon Arc Light Fastness Tester Xenon Arc Light Fastness Tester is a laboratory instrument used to evaluate the color fastness
      Add to cart
      Quick view
      Fatigue tester for Elastic fabric

      Fatigue tester for Elastic fabric

      ,
      $0.00

      Fatigue Tester for Elastic Fabric

      Fatigue tester for Elastic fabric

      Fatigue tester for Elastic fabric

        A Fatigue Tester for Elastic Fabric is a specialized instrument designed to evaluate the durability and performance of elastic materials, such as elastic bands, tapes, and fabrics, under repeated stretching and relaxation cycles. This testing is crucial for applications where elastic materials are subjected to continuous or repetitive stress, ensuring they maintain their functionality over time.   Purpose Fatigue Tester for Elastic Fabric The primary objective of this tester is to simulate the conditions that elastic fabrics endure during actual use. By repeatedly stretching and relaxing the material, the tester assesses:   - Elastic Recovery: The ability of the material to return to its original length after stretching. - Fatigue Resistance: How well the material withstands repeated cycles without significant degradation. - Durability: The lifespan of the elastic properties under continuous use.   Working Principle of Fatigue Tester for Elastic Fabric The tester operates by clamping a specimen of the elastic fabric and subjecting it to cyclic stretching and relaxation.   Key operational features include: Cycle Count: The number of stretching and relaxation cycles is set according to testing requirements. - Speed Regulation: The rate of stretching can be adjusted to simulate different usage conditions. - Monitoring: The tester records data such as the number of cycles completed and any changes in the fabric's properties.   For instance, the Elastic Band Fatigue Tester ADL-FT01 features a high-speed linear slide, servo motor, and touch screen control software, allowing precise control over stretching parameters   Key Specifications of Fatigue Tester for Elastic Fabric While specifications may vary among different models, common parameters include: - Stretch Percentage: Adjustable from 0% to 100%. - Stretching Speed: Up to 40 cycles per minute. - Sample Length Range: Maximum of 260mm. - Cycle Count Capacity: Up to 9,999,999 cycles. - Control Interface: Typically a 7-inch color touch screen. - Power Supply: AC220V 50Hz/60Hz. These features enable comprehensive testing of elastic materials under various conditions.   Benefits of Fatigue Tester for Elastic Fabric - Quality Assurance: Ensures that elastic materials meet required durability standards. - Product Development: Aids in the design of materials with improved fatigue resistance. Cost Efficiency: Identifies potential material failures early, reducing product returns and warranty claims. - Compliance: Helps manufacturers adhere to industry standards such as GB/T 37635.   Applications of Fatigue Tester for Elastic Fabric Fatigue testers for elastic fabrics are widely used in: - Textile Manufacturing: Testing elastic components in garments, such as waistbands and cuffs. - Medical Textiles: Evaluating the durability of elastic materials used in bandages and supports. - Automotive Industry: Assessing elastic components in car interiors. - Research and Development: Developing new elastic materials with enhanced properties.   Features of Fatigue Tester for Elastic Fabric:
      1. Adjustable Stretch Range - Allows setting stretch levels (e.g., 0–100%) to simulate real-life fabric use.
      2. High-Cycle Capability - Supports up to millions of stretch-relax cycles for long-term fatigue analysis.
      3. Touch Screen Control - 7-inch color display for easy setup, monitoring, and data entry.
      4. Servo Motor Driven - Ensures precise and smooth linear motion during testing.
       
      1. Customizable Speed - Adjustable test speed (e.g., up to 40 cycles per minute) based on test requirements.
      2. Multi-Sample Testing - Some models allow testing multiple specimens simultaneously.
      3. Cycle Counter with Alarm - Built-in counter with programmable stop after preset cycles and auto-alert feature.
       
      1. Durable Construction - Robust metal frame suitable for continuous testing in lab environments.
      2. Standard Compliance - Designed to follow standards like GB/T 37635 for elastic fabric testing.
        How to Use Fatigue Tester for Elastic Fabric:
      1. Prepare the Sample
      - Cut the elastic fabric to the specified size (e.g., 260 mm max length). - Mark the gauge length if needed for measurement after testing.
      1. Mount the Sample - Secure both ends of the fabric in the upper and lower clamps.
      2. Set Test Parameters
      - Enter the desired stretch percentage (e.g., 50%). - Set the number of cycles and speed (e.g., 30 cycles/min). - Adjust dwell time if required (time fabric stays stretched).  
      1. Start the Test - Press start on the touch screen interface. - The machine will cyclically stretch and release the sample.
      2. Monitor Progress - Observe operation or let it run automatically.
      - Machine stops automatically after reaching the set cycles.
      1. Remove and inspect - Take out the fabric and measure elongation, recovery, or visual defects.
      2. Record and Compare Results - Compare with initial measurements or standard performance criteria.
        Fatigue tester for Elastic fabric

        Fatigue tester for Elastic fabric

         
      Add to cart
      Quick view
      VeriVide Colour Assessment Cabinets
      Color Matching Cabinet -light Box

      VeriVide Colour Assessment Cabinets

      , ,
      $0.00

      VeriVide Colour Assessment Cabinets

      VeriVide Colour Assessment Cabinets VeriVide offers high-quality Colour Assessment Cabinets (CACs) such as the CAC 60-4, CAC 60-5, and CAC 120-4&5. These cabinets, originating from the UK, are reliable tools for visual evaluation in quality assurance, meeting national, international, and retailer standards. They effectively mitigate issues related to color assessment.VeriVide Colour Assessment Cabinets High-quality visual evaluation tool for quality assurance. Adhering to national, international and retailer standards.Colour Assessment Cabinet's (CACs) reduce problems associated with assessing products or samples in different environments,be though geological or seasonal, offering a cost-effective method to ensure visual accuracy and product quality. Color Light Box Enhance color precision with VeriVide's cutting-edge Colour Assessment Cabinets. These cabinets are meticulously designed to ensure accurate color evaluation in various industries. Invest in VeriVide Colour Assessment Cabinets to elevate your color assessment process.  Enhance Color Precision with VeriVide's Cutting-Edge Assessment Cabinets, which meet or surpass ISO 3664 and BS 950 Part 1 international standards. The cabinets are adaptable to user requirements, with lamp options to choose different light sources. Available in 60, 120, and 150cm widths, VeriVide Colour Assessment Cabinets provide a flexible solution for accurate color assessment. Incorporate user-friendly features like servicing indicator, auto sequence, warm-up, power save and data storage.4 or 5 light source options Versions available for colour fastness testing and particulate testing both adhering to global standardsEnsure  that you are using the best equipment available as they provide the best fluorescent D65 daylight simulator, with the highest Colour   Rendering Index (CRI), available. VeriVide Colour Assessment Cabinets products are known as light boxes, viewing booths, colour cabinets and others, depending on which industry or country they are serving in. They are used within a wide array of industry sectors throughout the world including textile and apparel, graphics, automotive, ceramics, cosmetics, pharmacology (CAC Particulate),   food, footwear, packaging and printing.Download the Datasheet below for more information or click 'VeriVide CAC Datasheet Here' to get in touch with colour experts. VeriVide CAC Datasheet Here Features of VeriVide Colour Assessment Cabinets • CAC 60, CAC 120 and CAC 150 accommodate 60, 120 and 150cm tubes respectively
      • Either 4 or 5 light sources available for each model including D65, D50, 840P15, F and UV - see Lamp Options.• Internal finishes in Munsell N5, Munsell N7 or Grey 5574 • Diffuser and/or dimmer options available​ Dimensions of VeriVide Colour Assessment Cabinets CAC 60-4 Dimensions (mm) Width Height Depth Overall 710 545 420
      Viewing Area 680 360 380 CAC 60-5 Dimensions (mm) Width Height Depth Overall 710 545 540 Viewing Area 680 360 495 CAC 120-4 and CAC 120-5 Dimensions (mm) Width Height DepthOverall 1290 755 620 Viewing Area 1260 570 585 CAC 150-4 and CAC 150-5 Dimensions (mm) Width Height Depth Overall 1560 755 620 Viewing Area 1530 570 585 Lamp Options of VeriVide Colour Assessment Cabinets Features of VeriVide Colour Assessment Cabinets Lamp specifications: CIE Daylight Illuminants Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code D75 VeriVide D75 "Artificial Daylight" Correlated colour temperature 7500K. Conforming to the USA ASTM (American Society for Testing and Materials) D1729-82 standard for D75 Illuminant. With high CIE specifications, for accurate colour matching. 96 600mm 20w T12 600D75 D65 VeriVide D65 "Artificial Daylight" VeriVide D65 “Artificial Daylight”. Correlated colour temperature 6500K. Within the tolerances prescribed in BS 950: Part 1; and all international specifications for D65 illluminant. Specified for most applications where there is a need to maintain colour consistency and quality.Conforming highly to the CIE specifications, for accurate colour matching. 98 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 600D65 1200D65 1500D65 D50 D50 "Artificial   Daylight" Correlated colour temperature of 5000K. For the Graphic Technology and Photography industries. D50 lamps conform to BS 950: Part 2 and ISO 3664. Recommended for transmitted light source to view transparencies and for the reflected light source to view reproductions. 98 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 60095 120095 150095 CIE Illuminant 'A' Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code'F' Tungsten Filament Tungsten Filament Lighting. Approximate color temperature of 2800K. Required by BS 950: Part 1 as a test for metamerism (approximating CIE Illuminant ‘A’). Typical light source used within domestic environments. 100 Globe Globe Round Clear-   284mm Opal-284mm 40w60w 150w 60w 60w 45mm 45mm - 40G450 60G450 150FILO 28460CL28460OP'A' Tungsten Halogen Tungsten Halogen Lighting (CIE Illuminant ‘A’). This represents incandescent A (inc-A) with a colour temperature of 2856K. Typical light source used within domestic environments. Used to check for metamerism. 100 - 35w - HALO/12V /35WLP Alternative (fluorescent) lighting / Point of SaleLight Source Name Lamp Description C.R.I. Length Watts Diam Product Code840 P15 VeriVide 840P15 Narrow Band Triphosphor Fluorescent Lamps. Correlated colour tempera ture of 4000K. CIE Illuminant F11. Often chosen as a European “Point of Sale” light source, with good colour rendering and manufactured to a tighter tolerance specification as prescribed by Marks & Spencer. (Formerly TL84P15) 85 600mm 1200mm 1500mm 18w 36w 58w T8 T8T8 60084P15120084P15 150084P15CWF Cool White Cool White Broad Band Fluorescent Lamps. Correlated colour temperature of 4000K. Used as an American “Point of Sale” light source. Moderate colour rendering. 62 600mm 1200mm 1500mm 20w 40w 65/80w T12 T12 T12 60033 120033 150033U35 Ultralume 35 Ultralume Narrow Band Triphosphor Fluorescent Lamp.Correlated colour temperature 3500K. An American “Point of Sale” light source, with good colour rendering. 86 600mm 1200mm 17w 32w T8 T8 T8 600U35 1200U35 830 830 Narrow Band Triphosphor Fluorescent Lamp. Correlated colour temperature 3000K. Often chosen as a European “Point of Sale” light source with good colour rendering.(Formerly TL83) 85 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 60083 120083 150083 Horizon Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code 'H' Horizon Lighting Colour temperature 2300K. Used for Automotive, Apparel and Metamerism Testing. As specified by the ASTM (American Society for testing and Materials) D1729-74, Standard Practise for Visual Evaluation of Colour Differences of Opaque Materials. 98 - 75w - HALO/12V /75WUltraviolet Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code UV Ultraviolet Ultraviolet Blacklight. Used to detect the presence of Optical Brightening Agents and/or Fluorescent dyes. Therefore it is useful when assessing white and Fluorescent shades to check the level present and its evenness. N/A Clear-450mm Blacklight-600mm 15w 18w T8 T8 450UV15 600UV18 Paint specification of  VeriVide Colour Assessment Cabinets PAINT (For Cabinet Interiors) Name Description Quantity Product Code Crown Plain Grey 5574 Matt Emulsion 0.5 Litre Tins 5574 0.5L Munsell N5 0.5 Litre Tins N5 0.5L Munsell N7 0.5 Litre Tins N7 0.5L VERIVIDE MAINTENANCE PACK The VeriVide Maintenance Pack includes Cleaning Materials, Brush & Roller plus 0.5 litres of Paint.   https://maamtexbd.com/product/verivide-colour-assessment-cabinets/
      Add to cart
      Quick view
      Martindale abrasion tester updated
      Martindale abrasion tester updated

      Martindale abrasion tester Updated

      $0.00

      Martindale abrasion tester updated

      Martindale abrasion tester updated

      Latest Update 1 A+

      Martindale Wear-Resistant Instrument Martindale Wear-Resistant Instrument Martindale abrasion tester updated purposefully designed to enhance the ease of use and reliability of results Strong and solid base feet to increase instrument stability Sliding pad design reduces noise of motion plate. Martindale abrasion tester updated Accessible Motion plate storage rack incorporated into the side of the instrument to conserve lab space and allowing full access to all abrasion stations Enhanced sample holders allowing for quicker sample loading Quick-lock couplers facilitate easy access for service and calibration Martindale abrasion tester updated is a versatile instrument capable of multiple abrasion and pilling tests. It uses precision components to deliver the exact abrasion or pilling movement required by all international and retailer standards. Martindale abrasion tester updated Full Color Touch Screen Controls Most common functions accessible in one or two touches Displays individual station counters Test materials ordering information accessible directly on the instrument display Multi-lingual interface with display options in English, Chinese. Martindale abrasion tester updated Designed for Adaptability the Martindale Line can perform a variety of abrasion and pilling tests. The user-friendly design allows operators to easily change over testing station configurations with specialized enhancement kits. Martindale abrasion tester updated can be used for: Fabric Abrasion, Fabric Pilling, Sock, Abrasion, Leather Abrasion, Edge Abrasion, Testing Floor Coverings, Toothbrush Testing's, Other Specialized Testing's, Martindale abrasion tester updated Convenient The compact base is designed to conserve valuable lab space while providing maximum testing capacity. Two sizes available: Larger base can have 4, 6, or 9 test positions Instrument Comes Standard with: Sample Holders 9 kPa and 12 kPa Weights for standard abrasion testing Standard Mounting Device Martindale abrasion tester updated have Accessory Holder Available separately to conveniently hold martindale accessories while not in use Made from high quality acrylic and designed to be both practical and attractive Quality Test Materials supplies a wide variety of consumables design specifically for testing on the Martindale Abrasion and Pilling Tester. These high quality consumables will ensure that each test performed is accurate and reliable. Martindale abrasion tester updated Scope of application Its is used for testing the wear resistance, abrasion and appearance change (pilling) of textiles and membrane materials (Martindale method). Martindale abrasion tester updated Related standard GB/T 21196 (International Standard Drafting Unit), FZ/T 20020, GB/T 4802.2, GB/T 13775, ASTM D4966, ASTM D4970, ASTM D3886, ISO 12945.2, ISO 12947, JIS L1096, IWSTM 196/TM112 M&S, etc. [Instrumentation characteristics] 1. Three test modes, adding and subtracting two counting modes. 2. No turning guide plate design, no need to move the sample. 3. PLC modular control, seven inch color touch screen, Chinese and English double-choice menu operation. [Technical parameters] 1. Workplace:9 place 666665555 2. Counting range:0-999999 times 3. Maximum travel:60.5±0.5mm 24±0.5mm 4. Pressure mass:
      1. Clothing sample weight hammer:397±2g Furniture decoration sample weight hammer:597±2g C. Stainless steel discs:260±1g
      2. Effective friction diameter of grinding block: Type A 198g(3kpa) friction head 28.8-0.084mm Type B 155g(1.52N) friction head 90-0.10mm 6. Relative velocity of gripper and grinding table:50 + 2R / MI (20-70r / min adjustable) 7. Sampling hammer quality:2385±10g 8. Shape size:870×580×300mm 9. power supply:AC220V 50Hz 500W 10.Weight:73KG.
      3. [Standard accessories] Items and specifications Qty Notes Main machine 1Power cable 1A type 198g Friction head 9 B type 155g(1.52N) Friction head 9 597g Hammer 9 397g Hammer 9, 666666666 260g Stainless steel disc 9, 2385g Holding hammer 1,B Friction head felt 18 ￠90mm Steel ball 6, Rubber ring 18, Inner Hexagonal Wrench 1
      4. Sampler 1, Fuse 2 3A, Standard felt 18, Weight:750±50g/m2, Thickness:2.5±0.5mm, Standard foam lining 40, Density:0.03g/cm3,Thickness:3mm,Standard abrasive 9 Circular shear template Each φ140mm、φ38mm,Small screw knife 1, Bottom foot 4
         
      Add to cart
      Quick view