Products
Bursting strength tester
Bursting strength tester
YG(B)032Q Pneumatic bursting tester
（China national patent：ZL201210486480.8 ZL201220628425.3）
[Scope of application]:
It is used to measure the burst strength and burst expansion degree of various fabrics,
including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other
fabrics made by other processes, under standard conditions or wet conditions.
[Related standards]:
GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc.
[Instrument characteristics]:
1. Microcomputer control, automatic burst test, automatic correction, automatic data
processing, and output results in the form of experimental report.
2. Aerodynamics, high cleanliness.
3. Color touch screen interface, Chinese and English menu operation, support online
communication.
4. Bursting pressure can reach up to 1.2MPa
5. The maximum burst and expansion degree can reach 70mm.
6. Strengthen the lighting system on the test surface.
7. The main aerodynamic force helps to clamp the sample system.
8. A variety of test areas are available, and the switching is easy.
9. A variety of unit conversions between Chinese and English.
10. Reliable anti-pinch safety protection design.
[Technical parameter]:
1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized)
2. The minimum graduation value: 0.0001Mpa
3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree
pressurization.
4. Test accuracy: ≤±0.2%F·S
5. Thickness of elastic diaphragm: ≤2mm
6. Testing area:
Area（cm²） 100 50 10 7.3
Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5
7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min
8. Safety cover: high-transparent plexiglass
9. Power supply: AC220V±10% 50Hz 800W
10. Dimensions: (470×490×780)mm (host L×W×H)
11. Weight: 45kg
YG(B)032Q Pneumatic bursting tester
（China national patent：ZL201210486480.8 ZL201220628425.3）
[Scope of application]:
It is used to measure the burst strength and burst expansion degree of various fabrics,
including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other
fabrics made by other processes, under standard conditions or wet conditions.
[Related standards]:
GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc.
[Instrument characteristics]:
1. Microcomputer control, automatic burst test, automatic correction, automatic data
processing, and output results in the form of experimental report.
2. Aerodynamics, high cleanliness.
3. Color touch screen interface, Chinese and English menu operation, support online
communication.
4. Bursting pressure can reach up to 1.2MPa
5. The maximum burst and expansion degree can reach 70mm.
6. Strengthen the lighting system on the test surface.
7. The main aerodynamic force helps to clamp the sample system.
8. A variety of test areas are available, and the switching is easy.
9. A variety of unit conversions between Chinese and English.
10. Reliable anti-pinch safety protection design.
[Technical parameter]:
1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized)
2. The minimum graduation value: 0.0001Mpa
3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree
pressurization.
4. Test accuracy: ≤±0.2%F·S
5. Thickness of elastic diaphragm: ≤2mm
6. Testing area:
Area（cm²） 100 50 10 7.3
Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5
7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min
8. Safety cover: high-transparent plexiglass
9. Power supply: AC220V±10% 50Hz 800W
10. Dimensions: (470×490×780)mm (host L×W×H)
11. Weight: 45kg 
CF to wash dunlin
CF to wash dunlin
Colorfastness to Washing Tester
Model: WF-12
Brand: Dunlin
Origin: China
Beaker Capacity: 12
Test Scope: Dyed textile product
Test Standards: AATCC 28/61/132/151/190, BS 1006 C01-C05, ISO 105 Part C01-C06/C08/D01, M&S C4/C5/C10A/P3B, FTMS 191-5610, NEXT TM2/3/5, GB/T 5711/3921
Consumables: Specimen Container, Stainless Steel Ball, Stainless Steel Disc, Container Sealing Gasket
Specification:
1. Test dock: 6 unit 550mL containers + 6 unit 1200mL containers
2. Specimen rack rotation speed: 40±2rpm
3. Capacity of container: 550mL, 1200mL
4. Temperature range: Room temperature to 97ºC
5. Temperature accuracy: ± 0.5ºC
6. Rate of temperature rise: Maximum speed for 2ºC/min
7. Internal materials: Imported Stainless Steel 316L
8. Control panel: Touch screen
9. Rack point control function helps to replace containers easily
10. Safety device: Safety door switch, over-temperature protector and dry heating protector
11. Heating media: Distilled water
12. Power supply: AC220V 50Hz 30A
Colorfastness to Washing Tester
Model: WF-12
Brand: Dunlin
Origin: China
Beaker Capacity: 12
Test Scope: Dyed textile product
Test Standards: AATCC 28/61/132/151/190, BS 1006 C01-C05, ISO 105 Part C01-C06/C08/D01, M&S C4/C5/C10A/P3B, FTMS 191-5610, NEXT TM2/3/5, GB/T 5711/3921
Consumables: Specimen Container, Stainless Steel Ball, Stainless Steel Disc, Container Sealing Gasket
Specification:
1. Test dock: 6 unit 550mL containers + 6 unit 1200mL containers
2. Specimen rack rotation speed: 40±2rpm
3. Capacity of container: 550mL, 1200mL
4. Temperature range: Room temperature to 97ºC
5. Temperature accuracy: ± 0.5ºC
6. Rate of temperature rise: Maximum speed for 2ºC/min
7. Internal materials: Imported Stainless Steel 316L
8. Control panel: Touch screen
9. Rack point control function helps to replace containers easily
10. Safety device: Safety door switch, over-temperature protector and dry heating protector
11. Heating media: Distilled water
12. Power supply: AC220V 50Hz 30A 
Color fastness to wash
Color fastness to washing tester SW-24AC
[Scope of application]
It can be used to test the color fastness of various textiles to washing,
dry cleaning and shrinkage.
It can also be used to test the performance of Color fastness to washing.
[Relevant Standards]
AATCC61/1A/2A/3A/4A/5A, JIS L0860/0844, BS1006,
GB/T3921/1/2/3/4/5, ISO105C01/02/03/04/05/06/08, etc.
[Technical parameters]
1.Test volume:550ml (x 75mm * 120mm) - applicable to GB, ISO, JIS
and other standards;1200ml (x 90mm * 200mm) --
AATCC standard 12 (AATCC) or 24 (GB, ISO, JIS)
2. The distance from the center of the rotating frame to the bottom of the cup.45mm
3. Rotation speed:40±2r/min
4. Time control range:0～9999min
5. Time control error:≤±5s
6. Temperature control range:Room temperature to 99.9 C;
7. Temperature control error:≤±2℃
8. Heating method:Electric heating
9. Power supply:Ac380V 50Hz 9KW
10. Size:930×690×840mm
11. Weight:170kg
Color fastness to wash
[Scope of application]
It can be used to test the color fastness of various textiles to washing,
dry cleaning and shrinkage.
It can also be used to test the performance of Color fastness to washing.
[Relevant Standards]
AATCC61/1A/2A/3A/4A/5A, JIS L0860/0844, BS1006,
GB/T3921/1/2/3/4/5, ISO105C01/02/03/04/05/06/08, etc.
[Technical parameters]
1.Test volume:550ml (x 75mm * 120mm) - applicable to GB, ISO, JIS
and other standards;1200ml (x 90mm * 200mm) --
AATCC standard 12 (AATCC) or 24 (GB, ISO, JIS)
2. The distance from the center of the rotating frame to the bottom of the cup.45mm
3. Rotation speed:40±2r/min
4. Time control range:0～9999min
5. Time control error:≤±5s
6. Temperature control range:Room temperature to 99.9 C;
7. Temperature control error:≤±2℃
8. Heating method:Electric heating
9. Power supply:Ac380V 50Hz 9KW
10. Size:930×690×840mm
11. Weight:170kg
Color fastness to wash 
Color fastness to washing machine
Color fastness to Washing machine
Model: WF-12
Brand: Dunlin
Origin: China
Beaker Capacity: 12
Test Scope: Dyed textile product
Test Standards: AATCC 28/61/132/151/190, BS 1006 C01-C05, ISO 105 Part C01-C06/C08/D01, M&S C4/C5/C10A/P3B, FTMS 191-5610, NEXT TM2/3/5, GB/T 5711/3921
Consumables: Specimen Container, Stainless Steel Ball, Stainless Steel Disc, Container Sealing Gasket
Specification:
1. Test dock: 6 unit 550mL containers + 6 unit 1200mL containers
2. Specimen rack rotation speed: 40±2rpm
3. Capacity of container: 550mL, 1200mL
4. Temperature range: Room temperature to 97ºC
5. Temperature accuracy: ± 0.5ºC
6. Rate of temperature rise: Maximum speed for 2ºC/min
7. Internal materials: Imported Stainless Steel 316L
8. Control panel: Touch screen
9. Rack point control function helps to replace containers easily
10. Safety device: Safety door switch, over-temperature protector and dry heating protector
11. Heating media: Distilled water
12. Power supply: AC220V 50Hz 30A
COLOR FASTNESS TO WASHING
Model: WF-12
Brand: DUNLIN
Pattern, Design & Technology By UK.
Assembly: China.
Beaker Capacity: 12 with 6 ISO+ 6 ATTCC
Test Scope: Dyed textile product Test
Standards: AATCC 28/61/132/151/190, BS 1006 C01-C05,
ISO 105 Part C01-C06/C08/D01, M&S C4/C5/C10A/P3B,
FTMS 191-5610, NEXT TM2/3/5, GB/T 5711/3921 JIS.
Specification:
1. Test dock : 6 unit 550mL containers + 6 unit 1200mL containers
Textile Testing Instruments
COLOR FASTNESS TO WASHING Machine dealer In Bangladesh,
COLOR FASTNESS TO WASHING Machine Importer in Bangladesh,
COLOR FASTNESS TO WASHING Machine in Bangladesh,
COLOR FASTNESS TO WASHING Machine in Bd,
COLOR FASTNESS TO WASHING Machine In Uttara,
COLOR FASTNESS TO WASHING Machine Price in Bangladesh,
COLOR FASTNESS TO WASHING Machine Supplier in Bangladesh,
COLOR FASTNESS TO WASHING Machine in Bangladesh,
Textile Testing Instruments
DUNLIN COLOR FASTNESS TO WASHING Machine dealer In Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine Importer in Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine in Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine in Bd,
DUNLIN COLOR FASTNESS TO WASHING Machine In Uttara,
DUNLIN COLOR FASTNESS TO WASHING Machine Price in Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine Supplier in Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine in Bangladesh,
DUNLIN gyro wash COLOR FASTNESS TO WASHING Machine in Bangladesh,
DUNLIN gyro wash COLOR FASTNESS TO WASHING Machine price in Bangladesh,
DUNLIN gyro wash COLOR FASTNESS TO WASHING Machine in Bangladesh textile market,
DUNLIN Rota wash COLOR FASTNESS TO WASHING Machine in Bangladesh,
DUNLIN Rota wash COLOR FASTNESS TO WASHING Machine price in Bangladesh,
DUNLIN rota wash COLOR FASTNESS TO WASHING Machine in Bangladesh textile market,
Textile Testing Instruments
DUNLIN COLOR FASTNESS TO WASHING Machine dealer In Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine Importer in Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine in Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine in Bd,
DUNLIN COLOR FASTNESS TO WASHING Machine In Uttara,
DUNLIN COLOR FASTNESS TO WASHING Machine Price in Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine Supplier in Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine in Bangladesh,
DUNLIN gyro wash COLOR FASTNESS TO WASHING Machine in Bangladesh,
DUNLIN gyro wash COLOR FASTNESS TO WASHING Machine price in Bangladesh,
DUNLIN gyro wash COLOR FASTNESS TO WASHING Machine in Bangladesh textile market,
DUNLIN Rota wash COLOR FASTNESS TO WASHING Machine in Bangladesh,
DUNLIN Rota wash COLOR FASTNESS TO WASHING Machine price in Bangladesh,
DUNLIN rota wash COLOR FASTNESS TO WASHING Machine in Bangladesh textile market,
Textile Testing Instruments
DUNLIN COLOR FASTNESS TO WASHING Machine dealer In Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine Importer in Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine in Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine in Bd,
DUNLIN COLOR FASTNESS TO WASHING Machine In Uttara,
DUNLIN COLOR FASTNESS TO WASHING Machine Price in Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine Supplier in Bangladesh,
DUNLIN COLOR FASTNESS TO WASHING Machine in Bangladesh,
DUNLIN gyro wash COLOR FASTNESS TO WASHING Machine in Bangladesh,
DUNLIN gyro wash COLOR FASTNESS TO WASHING Machine price in Bangladesh,
DUNLIN gyro wash COLOR FASTNESS TO WASHING Machine in Bangladesh textile market,
DUNLIN Rota wash COLOR FASTNESS TO WASHING Machine in Bangladesh,
DUNLIN Rota wash COLOR FASTNESS TO WASHING Machine price in Bangladesh,
DUNLIN rota wash COLOR FASTNESS TO WASHING Machine in Bangladesh textile market,
Digital Elmendorf tearing tester
Digital Elmendorf tearing tester
Scope of application
It is used for the determination of the tear resistance of various woven
fabrics (Elmendorf method), and it can also be used for the determination
of the tear resistance of thick paper, plastic sheeting, electrical tape, etc.
Related standards
GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734
etc.
Instrument characteristics
1. Maximum 300N test range
2. Microcomputer control, digital decoding, support online
communication
3. Color touch screen control, Chinese and English menu operation
interface
4. Pneumatic clamping, automatic cutting
5. A variety of measurement units (cN, gf) selection
6. Fully automatic operation with safe operation protection.
7. Automatically increase potential energy
[Technical parameter]:
1. Test range: first gear: (0～16)N second gear: (0～32)N third gear: (0～
64)N fourth gear: (0～128)N fifth gear: (0～300)N
2. Test accuracy: ≤±0.2%F·S
3. Tearing length: 43mm (non-standard 30-60mm can be set)
4. Automatic incision length: (20±0.2)mm
5. Sample size: (100×63)mm
6. Specimen clamping: pneumatic way
7. Sample test: Up to 10 sets per group on the device side, and 30 sets
of data can be selected to be saved
8. Power supply: AC220V±10% 50Hz 100W
9. Dimensions: (650×660×680)mm
10. Weight: 50kg
[Sample of control interface]:(English version is also available.)
Scope of application
It is used for the determination of the tear resistance of various woven
fabrics (Elmendorf method), and it can also be used for the determination
of the tear resistance of thick paper, plastic sheeting, electrical tape, etc.
Related standards
GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734
etc.
Instrument characteristics
1. Maximum 300N test range
2. Microcomputer control, digital decoding, support online
communication
3. Color touch screen control, Chinese and English menu operation
interface
4. Pneumatic clamping, automatic cutting
5. A variety of measurement units (cN, gf) selection
6. Fully automatic operation with safe operation protection.
7. Automatically increase potential energy
[Technical parameter]:
1. Test range: first gear: (0～16)N second gear: (0～32)N third gear: (0～
64)N fourth gear: (0～128)N fifth gear: (0～300)N
2. Test accuracy: ≤±0.2%F·S
3. Tearing length: 43mm (non-standard 30-60mm can be set)
4. Automatic incision length: (20±0.2)mm
5. Sample size: (100×63)mm
6. Specimen clamping: pneumatic way
7. Sample test: Up to 10 sets per group on the device side, and 30 sets
of data can be selected to be saved
8. Power supply: AC220V±10% 50Hz 100W
9. Dimensions: (650×660×680)mm
10. Weight: 50kg
[Sample of control interface]:(English version is also available.)
Product
Fabric flame retardant tester
fabric flame retardant tester IV type (small 450 method)
Scope of application
It is used for testing the intensity and speed of
burning of flammable textile materials after ignition.
(specific ignition nozzles and sample holders can be customized to meet multiple criteria).
Related standards
GB/T14644 ASTM D1230 CFR1610 etc.
Technical parameters
1. The spread of time:0 ~ 999.9S resolution 0.1S
2. The temperature inside the box shows:Room temperature -99 degrees C resolution 1 c
3. Igniting time:1S
4. Type of igniter:4 1/2 syringe
5. Sample clip size:Outer frame:204mm * 78mm inner frame:152mm×38mm
6. Distance from the top of the igniter to the sample surface:8mm
7. Studio size and outline size
Studio size:370mm×220mm×350mm
Outline size:375mm×245mm×478mm
8. Power supply:AC220V 50Hz 20W
9. Weight:18Kg
burning of flammable textile materials after ignition.
(specific ignition nozzles and sample holders can be customized to meet multiple criteria).
Related standards
GB/T14644 ASTM D1230 CFR1610 etc.
Technical parameters
1. The spread of time:0 ~ 999.9S resolution 0.1S
2. The temperature inside the box shows:Room temperature -99 degrees C resolution 1 c
3. Igniting time:1S
4. Type of igniter:4 1/2 syringe
5. Sample clip size:Outer frame:204mm * 78mm inner frame:152mm×38mm
6. Distance from the top of the igniter to the sample surface:8mm
7. Studio size and outline size
Studio size:370mm×220mm×350mm
Outline size:375mm×245mm×478mm
8. Power supply:AC220V 50Hz 20W
9. Weight:18Kg
Laboratory mini stenter Dryer
Laboratory mini stenter Dryer
Automatic fixing dryer
Application:
used for simulating the production onsite to produce the textile that meets customer requirement,
including the time、temperature、resin auxiliary agent formula, elongation of the same textile, and
it is also can provide basis manufacture and to ensure the correctness of mass production.
Basic design as Automatic Fixing Dryer,also connect external steam for printing sample
steaming. Owing the wide adjusting ranges regarding temperature, humidity, dwelling time, this
apparatus can be used for :
a) Electric heating for drying, curing and thermofixation, room temp.~230℃.
b) Steaming with saturated steam 102±2℃
c) Electric heating and steam together for HT steaming between 102±230℃
Textile Testing Instruments
Automatic Fixing Dryer dealer In Bangladesh,
Automatic Fixing Dryer Importer in Bangladesh,
Automatic Fixing Dryer in Bangladesh,
Automatic Fixing Dryer in Bd,
Automatic Fixing Dryer In Uttara,
Automatic Fixing Dryer Price in Bangladesh,
Automatic Fixing Dryer Supplier in Bangladesh,
Lab Dryer Machine in Bangladesh,
Rapid Dryer Mini Stanter in Bangladesh
Application:
used for simulating the production onsite to produce the textile that meets customer requirement,
including the time、temperature、resin auxiliary agent formula, elongation of the same textile, and
it is also can provide basis manufacture and to ensure the correctness of mass production.
Basic design as Automatic Fixing Dryer,also connect external steam for printing sample
steaming. Owing the wide adjusting ranges regarding temperature, humidity, dwelling time, this
apparatus can be used for :
a) Electric heating for drying, curing and thermofixation, room temp.~230℃.
b) Steaming with saturated steam 102±2℃
c) Electric heating and steam together for HT steaming between 102±230℃
Textile Testing Instruments
Automatic Fixing Dryer dealer In Bangladesh,
Automatic Fixing Dryer Importer in Bangladesh,
Automatic Fixing Dryer in Bangladesh,
Automatic Fixing Dryer in Bd,
Automatic Fixing Dryer In Uttara,
Automatic Fixing Dryer Price in Bangladesh,
Automatic Fixing Dryer Supplier in Bangladesh,
Lab Dryer Machine in Bangladesh,
Rapid Dryer Mini Stanter in Bangladesh 
Fabric air permeability tester
Fabric Air Permeability Tester
Appliance Range
It is used to TEST the air permeability of various textile fabrics, including industrial fabrics, nonwoven fabrics and other textile products and other breathable materials.
Related Standards
GB / T 5453, GB / T 13764, ISO 9237, ISO 5636, ASTM D737, etc.
Instrument characteristics
1. Automatic sample clamping, automatic nozzle replacement, and quick test.
2. Microcomputer processing, the test results are displayed directly, without manual table calculation;
3. Built-in continuous test mode, the test unit can be switched as needed.
4. Chinese LCD menu operation, configure computer interface.
Technical parameter
1. Range of sample pressure difference: 1 ～ 4000Pa
2. Measurable air permeability: 1 ～ 40,000mm / s
3. Measurement error: ≤ ± 2%
4. Measurable fabric thickness: ≤8mm
5. Test area: 5cm2; 20cm2; 50cm2; 100cm2
Ф50mm (≈19.6cm2)
Ф70mm (≈38.5cm2)
6. Nozzles: 11 in total (automatic replacement of digital setting)
CODE 00 01 02 03 04 05 06 07 08 09 10
DIAφ（mm）
0.8 1.2 2 3 4 6 8 10 12 16 20
7.Data Capacity:≤200 times tests
8.Power Supply：AC220V 50Hz 2KW
9.Weight：80Kg
10.Shape：1250×700×1250mm
Appliance Range
It is used to TEST the air permeability of various textile fabrics, including industrial fabrics, nonwoven fabrics and other textile products and other breathable materials.
Related Standards
GB / T 5453, GB / T 13764, ISO 9237, ISO 5636, ASTM D737, etc.
Instrument characteristics
1. Automatic sample clamping, automatic nozzle replacement, and quick test.
2. Microcomputer processing, the test results are displayed directly, without manual table calculation;
3. Built-in continuous test mode, the test unit can be switched as needed.
4. Chinese LCD menu operation, configure computer interface.
Technical parameter
1. Range of sample pressure difference: 1 ～ 4000Pa
2. Measurable air permeability: 1 ～ 40,000mm / s
3. Measurement error: ≤ ± 2%
4. Measurable fabric thickness: ≤8mm
5. Test area: 5cm2; 20cm2; 50cm2; 100cm2
Ф50mm (≈19.6cm2)
Ф70mm (≈38.5cm2)
6. Nozzles: 11 in total (automatic replacement of digital setting)
CODE 00 01 02 03 04 05 06 07 08 09 10
DIAφ（mm）
0.8 1.2 2 3 4 6 8 10 12 16 20
7.Data Capacity:≤200 times tests
8.Power Supply：AC220V 50Hz 2KW
9.Weight：80Kg
10.Shape：1250×700×1250mm
Digital Elmendorf tearing tester
Digital Elmendorf tearing tester
Scope of application
It is used for the determination of the tear resistance of various woven
fabrics (Elmendorf method), and it can also be used for the determination
of the tear resistance of thick paper, plastic sheeting, electrical tape, etc.
Related standards
GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734
etc.
Instrument characteristics
1. Maximum 300N test range
2. Microcomputer control, digital decoding, support online
communication
3. Color touch screen control, Chinese and English menu operation
interface
4. Pneumatic clamping, automatic cutting
5. A variety of measurement units (cN, gf) selection
6. Fully automatic operation with safe operation protection.
7. Automatically increase potential energy
[Technical parameter]:
1. Test range: first gear: (0～16)N second gear: (0～32)N third gear: (0～
64)N fourth gear: (0～128)N fifth gear: (0～300)N
2. Test accuracy: ≤±0.2%F·S
3. Tearing length: 43mm (non-standard 30-60mm can be set)
4. Automatic incision length: (20±0.2)mm
5. Sample size: (100×63)mm
6. Specimen clamping: pneumatic way
7. Sample test: Up to 10 sets per group on the device side, and 30 sets
of data can be selected to be saved
8. Power supply: AC220V±10% 50Hz 100W
9. Dimensions: (650×660×680)mm
10. Weight: 50kg
[Sample of control interface]:(English version is also available.)
Scope of application
It is used for the determination of the tear resistance of various woven
fabrics (Elmendorf method), and it can also be used for the determination
of the tear resistance of thick paper, plastic sheeting, electrical tape, etc.
Related standards
GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734
etc.
Instrument characteristics
1. Maximum 300N test range
2. Microcomputer control, digital decoding, support online
communication
3. Color touch screen control, Chinese and English menu operation
interface
4. Pneumatic clamping, automatic cutting
5. A variety of measurement units (cN, gf) selection
6. Fully automatic operation with safe operation protection.
7. Automatically increase potential energy
[Technical parameter]:
1. Test range: first gear: (0～16)N second gear: (0～32)N third gear: (0～
64)N fourth gear: (0～128)N fifth gear: (0～300)N
2. Test accuracy: ≤±0.2%F·S
3. Tearing length: 43mm (non-standard 30-60mm can be set)
4. Automatic incision length: (20±0.2)mm
5. Sample size: (100×63)mm
6. Specimen clamping: pneumatic way
7. Sample test: Up to 10 sets per group on the device side, and 30 sets
of data can be selected to be saved
8. Power supply: AC220V±10% 50Hz 100W
9. Dimensions: (650×660×680)mm
10. Weight: 50kg
[Sample of control interface]:(English version is also available.) 
Digital Elmendorf tearing tester 1
Digital Elmendorf tearing tester 1
[Scope of application]:
It is used for the determination of the tear resistance of various woven fabrics
(Elmendorf method), and it can also be used for the determination of the tear
resistance of thick paper, plastic sheeting, electrical tape, etc.
[Related standards]
GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734 etc.
[Instrument characteristics]:
1. Test capacity is up to 128N
2. Microcomputer control, digital decoding, support online communication
3. Color touch screen control, Chinese and English menu operation interface
4. Pneumatic clamping, automatic cutting
5. A variety of measurement units (cN, gf) selection
[Technical parameter]:
Test range:
A hammer: (0～16)N B hammer: (0～32)N C hammer: (0～64)N D hammer: (0～
128)N
2. Test accuracy: ≤±0.2%F·S
3. Tearing length: 43mm
4. Automatic incision length: (20±0.2)mm
5. Sample size: (100×63)mm
6. Specimen clamping: pneumatic way
7. Power supply: AC220V±10% 50Hz 100W
8. Dimensions: (560×480×530)mm
9. Weight: 78kg
[Scope of application]:
It is used for the determination of the tear resistance of various woven fabrics
(Elmendorf method), and it can also be used for the determination of the tear
resistance of thick paper, plastic sheeting, electrical tape, etc.
[Related standards]
GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734 etc.
[Instrument characteristics]:
1. Test capacity is up to 128N
2. Microcomputer control, digital decoding, support online communication
3. Color touch screen control, Chinese and English menu operation interface
4. Pneumatic clamping, automatic cutting
5. A variety of measurement units (cN, gf) selection
[Technical parameter]:
Test range:
A hammer: (0～16)N B hammer: (0～32)N C hammer: (0～64)N D hammer: (0～
128)N
2. Test accuracy: ≤±0.2%F·S
3. Tearing length: 43mm
4. Automatic incision length: (20±0.2)mm
5. Sample size: (100×63)mm
6. Specimen clamping: pneumatic way
7. Power supply: AC220V±10% 50Hz 100W
8. Dimensions: (560×480×530)mm
9. Weight: 78kg
Color fastness to wash
Color fastness to washing tester SW-24AC
[Scope of application]
It can be used to test the color fastness of various textiles to washing,
dry cleaning and shrinkage.
It can also be used to test the performance of Color fastness to washing.
[Relevant Standards]
AATCC61/1A/2A/3A/4A/5A, JIS L0860/0844, BS1006,
GB/T3921/1/2/3/4/5, ISO105C01/02/03/04/05/06/08, etc.
[Technical parameters]
1.Test volume:550ml (x 75mm * 120mm) - applicable to GB, ISO, JIS
and other standards;1200ml (x 90mm * 200mm) --
AATCC standard 12 (AATCC) or 24 (GB, ISO, JIS)
2. The distance from the center of the rotating frame to the bottom of the cup.45mm
3. Rotation speed:40±2r/min
4. Time control range:0～9999min
5. Time control error:≤±5s
6. Temperature control range:Room temperature to 99.9 C;
7. Temperature control error:≤±2℃
8. Heating method:Electric heating
9. Power supply:Ac380V 50Hz 9KW
10. Size:930×690×840mm
11. Weight:170kg
Color fastness to wash
[Scope of application]
It can be used to test the color fastness of various textiles to washing,
dry cleaning and shrinkage.
It can also be used to test the performance of Color fastness to washing.
[Relevant Standards]
AATCC61/1A/2A/3A/4A/5A, JIS L0860/0844, BS1006,
GB/T3921/1/2/3/4/5, ISO105C01/02/03/04/05/06/08, etc.
[Technical parameters]
1.Test volume:550ml (x 75mm * 120mm) - applicable to GB, ISO, JIS
and other standards;1200ml (x 90mm * 200mm) --
AATCC standard 12 (AATCC) or 24 (GB, ISO, JIS)
2. The distance from the center of the rotating frame to the bottom of the cup.45mm
3. Rotation speed:40±2r/min
4. Time control range:0～9999min
5. Time control error:≤±5s
6. Temperature control range:Room temperature to 99.9 C;
7. Temperature control error:≤±2℃
8. Heating method:Electric heating
9. Power supply:Ac380V 50Hz 9KW
10. Size:930×690×840mm
11. Weight:170kg
Color fastness to wash
CF to wash dunlin
CF to wash dunlin
Colorfastness to Washing Tester
Model: WF-12
Brand: Dunlin
Origin: China
Beaker Capacity: 12
Test Scope: Dyed textile product
Test Standards: AATCC 28/61/132/151/190, BS 1006 C01-C05, ISO 105 Part C01-C06/C08/D01, M&S C4/C5/C10A/P3B, FTMS 191-5610, NEXT TM2/3/5, GB/T 5711/3921
Consumables: Specimen Container, Stainless Steel Ball, Stainless Steel Disc, Container Sealing Gasket
Specification:
1. Test dock: 6 unit 550mL containers + 6 unit 1200mL containers
2. Specimen rack rotation speed: 40±2rpm
3. Capacity of container: 550mL, 1200mL
4. Temperature range: Room temperature to 97ºC
5. Temperature accuracy: ± 0.5ºC
6. Rate of temperature rise: Maximum speed for 2ºC/min
7. Internal materials: Imported Stainless Steel 316L
8. Control panel: Touch screen
9. Rack point control function helps to replace containers easily
10. Safety device: Safety door switch, over-temperature protector and dry heating protector
11. Heating media: Distilled water
12. Power supply: AC220V 50Hz 30A
Colorfastness to Washing Tester
Model: WF-12
Brand: Dunlin
Origin: China
Beaker Capacity: 12
Test Scope: Dyed textile product
Test Standards: AATCC 28/61/132/151/190, BS 1006 C01-C05, ISO 105 Part C01-C06/C08/D01, M&S C4/C5/C10A/P3B, FTMS 191-5610, NEXT TM2/3/5, GB/T 5711/3921
Consumables: Specimen Container, Stainless Steel Ball, Stainless Steel Disc, Container Sealing Gasket
Specification:
1. Test dock: 6 unit 550mL containers + 6 unit 1200mL containers
2. Specimen rack rotation speed: 40±2rpm
3. Capacity of container: 550mL, 1200mL
4. Temperature range: Room temperature to 97ºC
5. Temperature accuracy: ± 0.5ºC
6. Rate of temperature rise: Maximum speed for 2ºC/min
7. Internal materials: Imported Stainless Steel 316L
8. Control panel: Touch screen
9. Rack point control function helps to replace containers easily
10. Safety device: Safety door switch, over-temperature protector and dry heating protector
11. Heating media: Distilled water
12. Power supply: AC220V 50Hz 30A
Bursting strength tester
Bursting strength tester
YG(B)032Q Pneumatic bursting tester
（China national patent：ZL201210486480.8 ZL201220628425.3）
[Scope of application]:
It is used to measure the burst strength and burst expansion degree of various fabrics,
including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other
fabrics made by other processes, under standard conditions or wet conditions.
[Related standards]:
GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc.
[Instrument characteristics]:
1. Microcomputer control, automatic burst test, automatic correction, automatic data
processing, and output results in the form of experimental report.
2. Aerodynamics, high cleanliness.
3. Color touch screen interface, Chinese and English menu operation, support online
communication.
4. Bursting pressure can reach up to 1.2MPa
5. The maximum burst and expansion degree can reach 70mm.
6. Strengthen the lighting system on the test surface.
7. The main aerodynamic force helps to clamp the sample system.
8. A variety of test areas are available, and the switching is easy.
9. A variety of unit conversions between Chinese and English.
10. Reliable anti-pinch safety protection design.
[Technical parameter]:
1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized)
2. The minimum graduation value: 0.0001Mpa
3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree
pressurization.
4. Test accuracy: ≤±0.2%F·S
5. Thickness of elastic diaphragm: ≤2mm
6. Testing area:
Area（cm²） 100 50 10 7.3
Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5
7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min
8. Safety cover: high-transparent plexiglass
9. Power supply: AC220V±10% 50Hz 800W
10. Dimensions: (470×490×780)mm (host L×W×H)
11. Weight: 45kg
YG(B)032Q Pneumatic bursting tester
（China national patent：ZL201210486480.8 ZL201220628425.3）
[Scope of application]:
It is used to measure the burst strength and burst expansion degree of various fabrics,
including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other
fabrics made by other processes, under standard conditions or wet conditions.
[Related standards]:
GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc.
[Instrument characteristics]:
1. Microcomputer control, automatic burst test, automatic correction, automatic data
processing, and output results in the form of experimental report.
2. Aerodynamics, high cleanliness.
3. Color touch screen interface, Chinese and English menu operation, support online
communication.
4. Bursting pressure can reach up to 1.2MPa
5. The maximum burst and expansion degree can reach 70mm.
6. Strengthen the lighting system on the test surface.
7. The main aerodynamic force helps to clamp the sample system.
8. A variety of test areas are available, and the switching is easy.
9. A variety of unit conversions between Chinese and English.
10. Reliable anti-pinch safety protection design.
[Technical parameter]:
1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized)
2. The minimum graduation value: 0.0001Mpa
3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree
pressurization.
4. Test accuracy: ≤±0.2%F·S
5. Thickness of elastic diaphragm: ≤2mm
6. Testing area:
Area（cm²） 100 50 10 7.3
Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5
7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min
8. Safety cover: high-transparent plexiglass
9. Power supply: AC220V±10% 50Hz 800W
10. Dimensions: (470×490×780)mm (host L×W×H)
11. Weight: 45kg 
Oscillation type Dyeing Machine
Oscillation Type Dyeing Machine
Brand: DUNLIN
Model:DL-D24
Origin: China
Pot Capacity:24 Pot , 250ml SS Beaker
Heating Mode: Electric heating
Heating Medium: Water/ glycerin
Heating Power: 3 Kw
Temperature Range: RT- 99℃/250℃
Liquor Ratio: 1:5-:20
Thermostat Tiime:0~99min
Oscillation: Speed:50-200rpm
Oscillation Range: 40±3mm
Power supply: 1∮AC 220V 50/60HZ
Dimensions (LxWxH): 880×420×330mm
Oscillation Type Dyeing Machine Dunlin price in Bangladesh
Oscillation Type Dyeing Machine Dunlin in textile
Textile testing equipment in Bangladesh
Textile testing equipment in Dhaka
Textile testing equipment in Uttara
MAAM tex Oscillation Type Dyeing Machine Dunlin price in Bangladesh
Oscillation Type Dyeing Machine 
Physical Testing & Fabric Testing
Xenon Arc Light Fastness Tester
Tensile Strength tester
Digital Elmendorf tearing tester 2
Random Tumble Pilling Tester
Martindale abrasion tester
Martindale abrasion tester
Martindale Wear-Resistant Instrument
[Scope of application]
It is used for testing the wear resistance, abrasion and appearance change (pilling) of
textiles and membrane materials (Martindale method).
[Relevant Standards]
GB/T 21196 (International Standard Drafting Unit), FZ/T 20020, GB/T 4802.2, GB/T 13775,
ASTM D4966, ASTM D4970, ASTM D3886, ISO 12945.2, ISO 12947, JIS L1096, IWSTM
196/TM112 M&S, etc.
[Instrumentation characteristics]
1. Three test modes, adding and subtracting two counting modes.
2. No turning guide plate design, no need to move the sample.
3. PLC modular control, seven inch color touch screen, Chinese and English double-choice
menu operation.
[Technical parameters]
1. Workplace:9 place
2. Counting range:0-999999 times
3. Maximum travel:60.5±0.5mm 24±0.5mm
4. Pressure mass:A. Clothing sample weight hammer:397±2g
B. Furniture decoration sample weight hammer:597±2g
C. Stainless steel discs:260±1g
5. Effective friction diameter of grinding block:
Type A 198g(3kpa) friction head 28.8-0.084mm
Type B 155g(1.52N) friction head 90-0.10mm
6. Relative velocity of gripper and grinding table:50 + 2R / MI (20-70r / min adjustable)
7. Sampling hammer quality:2385±10g
8. Shape size:885×600×290mm
9. power supply:AC220V 50Hz 500W
10. Weight: 81 kg
[Standard accessories]
Items and specifications Qty Notes
Main machine 1
Power cable 1
A type 198g Friction head 9
B type 155g(1.52N) Friction head 9
597g Hammer 9
397g Hammer 9
260g Stainless steel disc 9
2385g Holding hammer 1
B Friction head felt 18 ￠90mm
Steel ball 6
Rubber ring 18
Inner Hexagonal Wrench 1
Sampler 1
Fuse 2 3A
Standard felt 18
Weight:750±50g/m2
Thickness:2.5±0.5mm
Standard foam lining 40
Density:0.03g/cm3
Thickness:3mm
Standard abrasive 9
Circular shear template Each φ140mm、φ38mm
Small screw knife 1
Bottom foot 4
Martindale Wear-Resistant Instrument
[Scope of application]
It is used for testing the wear resistance, abrasion and appearance change (pilling) of
textiles and membrane materials (Martindale method).
[Relevant Standards]
GB/T 21196 (International Standard Drafting Unit), FZ/T 20020, GB/T 4802.2, GB/T 13775,
ASTM D4966, ASTM D4970, ASTM D3886, ISO 12945.2, ISO 12947, JIS L1096, IWSTM
196/TM112 M&S, etc.
[Instrumentation characteristics]
1. Three test modes, adding and subtracting two counting modes.
2. No turning guide plate design, no need to move the sample.
3. PLC modular control, seven inch color touch screen, Chinese and English double-choice
menu operation.
[Technical parameters]
1. Workplace:9 place
2. Counting range:0-999999 times
3. Maximum travel:60.5±0.5mm 24±0.5mm
4. Pressure mass:A. Clothing sample weight hammer:397±2g
B. Furniture decoration sample weight hammer:597±2g
C. Stainless steel discs:260±1g
5. Effective friction diameter of grinding block:
Type A 198g(3kpa) friction head 28.8-0.084mm
Type B 155g(1.52N) friction head 90-0.10mm
6. Relative velocity of gripper and grinding table:50 + 2R / MI (20-70r / min adjustable)
7. Sampling hammer quality:2385±10g
8. Shape size:885×600×290mm
9. power supply:AC220V 50Hz 500W
10. Weight: 81 kg
[Standard accessories]
Items and specifications Qty Notes
Main machine 1
Power cable 1
A type 198g Friction head 9
B type 155g(1.52N) Friction head 9
597g Hammer 9
397g Hammer 9
260g Stainless steel disc 9
2385g Holding hammer 1
B Friction head felt 18 ￠90mm
Steel ball 6
Rubber ring 18
Inner Hexagonal Wrench 1
Sampler 1
Fuse 2 3A
Standard felt 18
Weight:750±50g/m2
Thickness:2.5±0.5mm
Standard foam lining 40
Density:0.03g/cm3
Thickness:3mm
Standard abrasive 9
Circular shear template Each φ140mm、φ38mm
Small screw knife 1
Bottom foot 4 
Flame Retardant Tester for fabrics
Flame Retardant Tester for fabrics
fabric flame retardant tester
[Scope of application]
It is used for testing the intensity and speed of burning of flammable textile materials after ignition.
(specific ignition nozzles and sample holders can be customized to meet multiple criteria).
[Related standards]
GB/T14644 ASTM D1230 CFR1610 etc.
[Technical parameters]:
1. The spread of time:0 ~ 999.9S resolution 0.1S
2. The temperature inside the box shows:Room temperature -99 degrees C resolution 1 c
3. Igniting time:1S
4. Type of igniter:4 1/2 syringe
5. Sample clip size:Outer frame:204mm * 78mm inner frame:152mm×38mm
6. Distance from the top of the igniter to the sample surface:8mm
7. Studio size and outline size
Studio size:370mm×220mm×350mm
Outline size:375mm×245mm×478mm
8. Power supply:AC220V 50Hz 20W
9. Weight:18Kg
[Scope of application]
It is used for testing the intensity and speed of burning of flammable textile materials after ignition.
(specific ignition nozzles and sample holders can be customized to meet multiple criteria).
[Related standards]
GB/T14644 ASTM D1230 CFR1610 etc.
[Technical parameters]:
1. The spread of time:0 ~ 999.9S resolution 0.1S
2. The temperature inside the box shows:Room temperature -99 degrees C resolution 1 c
3. Igniting time:1S
4. Type of igniter:4 1/2 syringe
5. Sample clip size:Outer frame:204mm * 78mm inner frame:152mm×38mm
6. Distance from the top of the igniter to the sample surface:8mm
7. Studio size and outline size
Studio size:370mm×220mm×350mm
Outline size:375mm×245mm×478mm
8. Power supply:AC220V 50Hz 20W
9. Weight:18Kg 
Fiber oil fast extractor
fiber oil fast extractor
[Scope of application]
It is suitable for fast extraction of various fiber oils and
oils and determination of oil content of samples.
[Related standards]
GB6504 GB6977 etc.
[Technical parameters]
1.Heating temperature:Room temperature to 220 C
2. Temperature sensitivity:±1℃
3. Number of samples tested:3
4. Adapt to the extraction solvent:Petroleum ether, ether, dichloromethane and so on.
5. Heating time setting range:0～9999s
6. Power supply:AC220V 50HZ 0.45Kw
7. Size:346×315×510mm
8. Weight:18Kg
[Scope of application]
It is suitable for fast extraction of various fiber oils and
oils and determination of oil content of samples.
[Related standards]
GB6504 GB6977 etc.
[Technical parameters]
1.Heating temperature:Room temperature to 220 C
2. Temperature sensitivity:±1℃
3. Number of samples tested:3
4. Adapt to the extraction solvent:Petroleum ether, ether, dichloromethane and so on.
5. Heating time setting range:0～9999s
6. Power supply:AC220V 50HZ 0.45Kw
7. Size:346×315×510mm
8. Weight:18Kg SALE PRODUCTS
Digital Elmendorf tearing tester 1
Digital Elmendorf tearing tester 1
[Scope of application]:
It is used for the determination of the tear resistance of various woven fabrics
(Elmendorf method), and it can also be used for the determination of the tear
resistance of thick paper, plastic sheeting, electrical tape, etc.
[Related standards]
GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734 etc.
[Instrument characteristics]:
1. Test capacity is up to 128N
2. Microcomputer control, digital decoding, support online communication
3. Color touch screen control, Chinese and English menu operation interface
4. Pneumatic clamping, automatic cutting
5. A variety of measurement units (cN, gf) selection
[Technical parameter]:
Test range:
A hammer: (0～16)N B hammer: (0～32)N C hammer: (0～64)N D hammer: (0～
128)N
2. Test accuracy: ≤±0.2%F·S
3. Tearing length: 43mm
4. Automatic incision length: (20±0.2)mm
5. Sample size: (100×63)mm
6. Specimen clamping: pneumatic way
7. Power supply: AC220V±10% 50Hz 100W
8. Dimensions: (560×480×530)mm
9. Weight: 78kg
[Scope of application]:
It is used for the determination of the tear resistance of various woven fabrics
(Elmendorf method), and it can also be used for the determination of the tear
resistance of thick paper, plastic sheeting, electrical tape, etc.
[Related standards]
GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734 etc.
[Instrument characteristics]:
1. Test capacity is up to 128N
2. Microcomputer control, digital decoding, support online communication
3. Color touch screen control, Chinese and English menu operation interface
4. Pneumatic clamping, automatic cutting
5. A variety of measurement units (cN, gf) selection
[Technical parameter]:
Test range:
A hammer: (0～16)N B hammer: (0～32)N C hammer: (0～64)N D hammer: (0～
128)N
2. Test accuracy: ≤±0.2%F·S
3. Tearing length: 43mm
4. Automatic incision length: (20±0.2)mm
5. Sample size: (100×63)mm
6. Specimen clamping: pneumatic way
7. Power supply: AC220V±10% 50Hz 100W
8. Dimensions: (560×480×530)mm
9. Weight: 78kg
Fiber oil fast extractor
fiber oil fast extractor
[Scope of application]
It is suitable for fast extraction of various fiber oils and
oils and determination of oil content of samples.
[Related standards]
GB6504 GB6977 etc.
[Technical parameters]
1.Heating temperature:Room temperature to 220 C
2. Temperature sensitivity:±1℃
3. Number of samples tested:3
4. Adapt to the extraction solvent:Petroleum ether, ether, dichloromethane and so on.
5. Heating time setting range:0～9999s
6. Power supply:AC220V 50HZ 0.45Kw
7. Size:346×315×510mm
8. Weight:18Kg
[Scope of application]
It is suitable for fast extraction of various fiber oils and
oils and determination of oil content of samples.
[Related standards]
GB6504 GB6977 etc.
[Technical parameters]
1.Heating temperature:Room temperature to 220 C
2. Temperature sensitivity:±1℃
3. Number of samples tested:3
4. Adapt to the extraction solvent:Petroleum ether, ether, dichloromethane and so on.
5. Heating time setting range:0～9999s
6. Power supply:AC220V 50HZ 0.45Kw
7. Size:346×315×510mm
8. Weight:18Kg
Bursting strength tester
Bursting strength tester
YG(B)032Q Pneumatic bursting tester
（China national patent：ZL201210486480.8 ZL201220628425.3）
[Scope of application]:
It is used to measure the burst strength and burst expansion degree of various fabrics,
including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other
fabrics made by other processes, under standard conditions or wet conditions.
[Related standards]:
GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc.
[Instrument characteristics]:
1. Microcomputer control, automatic burst test, automatic correction, automatic data
processing, and output results in the form of experimental report.
2. Aerodynamics, high cleanliness.
3. Color touch screen interface, Chinese and English menu operation, support online
communication.
4. Bursting pressure can reach up to 1.2MPa
5. The maximum burst and expansion degree can reach 70mm.
6. Strengthen the lighting system on the test surface.
7. The main aerodynamic force helps to clamp the sample system.
8. A variety of test areas are available, and the switching is easy.
9. A variety of unit conversions between Chinese and English.
10. Reliable anti-pinch safety protection design.
[Technical parameter]:
1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized)
2. The minimum graduation value: 0.0001Mpa
3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree
pressurization.
4. Test accuracy: ≤±0.2%F·S
5. Thickness of elastic diaphragm: ≤2mm
6. Testing area:
Area（cm²） 100 50 10 7.3
Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5
7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min
8. Safety cover: high-transparent plexiglass
9. Power supply: AC220V±10% 50Hz 800W
10. Dimensions: (470×490×780)mm (host L×W×H)
11. Weight: 45kg
YG(B)032Q Pneumatic bursting tester
（China national patent：ZL201210486480.8 ZL201220628425.3）
[Scope of application]:
It is used to measure the burst strength and burst expansion degree of various fabrics,
including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other
fabrics made by other processes, under standard conditions or wet conditions.
[Related standards]:
GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc.
[Instrument characteristics]:
1. Microcomputer control, automatic burst test, automatic correction, automatic data
processing, and output results in the form of experimental report.
2. Aerodynamics, high cleanliness.
3. Color touch screen interface, Chinese and English menu operation, support online
communication.
4. Bursting pressure can reach up to 1.2MPa
5. The maximum burst and expansion degree can reach 70mm.
6. Strengthen the lighting system on the test surface.
7. The main aerodynamic force helps to clamp the sample system.
8. A variety of test areas are available, and the switching is easy.
9. A variety of unit conversions between Chinese and English.
10. Reliable anti-pinch safety protection design.
[Technical parameter]:
1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized)
2. The minimum graduation value: 0.0001Mpa
3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree
pressurization.
4. Test accuracy: ≤±0.2%F·S
5. Thickness of elastic diaphragm: ≤2mm
6. Testing area:
Area（cm²） 100 50 10 7.3
Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5
7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min
8. Safety cover: high-transparent plexiglass
9. Power supply: AC220V±10% 50Hz 800W
10. Dimensions: (470×490×780)mm (host L×W×H)
11. Weight: 45kg 
FAVORITE GARDEN
Many desktop publishing and
web page editors now.
web page editors now.
Decoration wooden present
$89.00
Nam gravida vulputate est venenatis eu at ullamcorper consectetur parturient suspendisse a elit lobortis ut convallis vestibulum vulputate nunc praesent mattis sem faucibus risus sociosqu.Dapibus curae a ac vestibulum a magnis ullamcorper orci a iaculis adipiscing augue a massa a torquent feugiat a. Scelerisque vestibulum.
Eames plastic side chair
$99.00
Consequat a scelerisque suspendisse vel et eget eu vitae adipiscing nibh scelerisque semper cum adipiscing facilisis adipiscing est accumsan lorem vestibulum. Aliquet mus a aptent ullam corper metus accumsan. Habitasse a purus nec ipsum a urna ac ullamcorper varius metus blandit posuere.
Panton tunior chair
$199.00
Placerat tempor dolor eu leo ullamcorper et magnis habitant ultrices consectetur arcu nulla mattis fermentum adipiscing a et bibendum sed platea malesuada eget vestibulum.
FURNITURE CATEGORIES
Lab Equipment & Instrument
Digital Ink Rub Tester
Printing and Paper Ink Rub Tester
Touch Screen Display
Brand: DUNLIN
Origin: China
Methode: ASTM D5264
Introduction:
use: Ink and print, color box wear resistance,
decolorization degree test.
the principle:This machine judges the wear resistance
and the degree of decolorization by rubbing between the
measured material and the white wood forest paper
