Maamtex bd | Professional distributor importer supplier & indenter

https://maamtexbd.com/

Professional distributor, importer, supplier & indenter

Pneumatic bursting tester

Bursting strength tester

,
$0.00
Bursting strength tester

Pneumatic bursting strength tester

true burst

Pneumatic bursting tester China national patent：ZL201210486480.8 ZL201220628425.3 Pneumatic bursting strength tester China national patent：ZL201210486480.8 ZL201220628425.3 [Scope of application]: It is used to measure the burst strength and burst expansion degree of various fabrics, including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other fabrics made by other processes, under standard conditions or wet conditions. This method is employed to assess the burst strength and degree of burst expansion of various types of fabrics, such as knitted, woven, non-woven, laminated, and others produced through different processes, under both standard and wet conditions. This technique is utilized to evaluate the burst strength and extent of burst expansion in various fabric types, including knitted, woven, non-woven, laminated, and others produced through diverse manufacturing processes, under both standard and wet conditions. Benefits of Bursting strength tester: Fast testing cycle for fast feedback to the production • Auto-start, a photocell detects the presence of a sample and automatically initiates a measurement sequence, thus allowing hands-free operation • Auto-cycling function permits the continuous cycling of the upper pressure foot to facilitate representative and continuous measurements
  • Available with automatic test strip feeder Measurements are simple to make with the Mullen type Bursting Strength Tester. Fast automatic measurements Measurement starts automatically once a test piece has been placed in the measuring gap. The clamping foot descends, and a bursting strength measurement is made.
The sample is then quickly released and is ready for the next measurement at a new position. To maximize the sample measurement rate, the tester uses a minimum of time between the bursts, so that a series of 10 measurements can be done in less than 45 seconds. The actual measuring time depends of course on the type of paper or paper board being tested. Three Different test results can be reported after a single measurement; bursting strength standard, bursting strength compensated, and bursting energy absorption (BEA).Bursting strength tester can be compensated for the stiffness of the diaphragm For low bursting strength levels, the stiffness of the diaphragm can account for a large portion of the bursting strength value. If desired, the device can also measure, calculate, and report effective bursting strength compensated from the effects of the diaphragm. Measurement of Bursting Energy Absorption (BEA) is used to determine the energy absorption capability of a material. Strong, flexible paper has higher energy absorption values, while brittle, stiff paper has lower values. Bursting Strength Tester calculates and reports BEA according to the SCAN P 24 standard Related standards of Bursting strength tester: GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc. [Instrument characteristics]: 1. Microcomputer control, automatic burst test, automatic correction, automatic data processing, and output results in the form of experimental report. 2. Aerodynamics, high cleanliness. 3. Color touch screen interface, Chinese and English menu operation, support online communication.
  1. Bursting pressure can reach up to 1.2MPa 5. The maximum burst and expansion degree can reach 70mm. 6. Strengthen the lighting system on the test surface. 7. The main aerodynamic force helps to clamp the sample system. 8. A variety of test areas are available, and the switching is easy.
  2. A variety of unit conversions between Chinese and English. 10. Reliable anti-pinch safety protection design. [Technical parameter]: 1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized) 2. The minimum graduation value: 0.0001Mpa 3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree pressurization.
4. Test accuracy: ≤±0.2%F·S 5. Thickness of elastic diaphragm: ≤2mm 6. Testing area: cm²） 100 50 10 7.3 Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5 7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min 8. Safety cover: high-transparent plexiglass 9. Power supply: AC220V±10% 50Hz 800W 10. Dimensions: (470×490×780)mm (host L×W×H)
Add to cart
Quick view
COLOR FASTNESS TO WASHING MACHINE
COLOR FASTNESS TO WASHING MACHINE

Color fastness to washing machine

$0.00
COLOR FASTNESS TO WASHING MACHINE
COLOR FASTNESS TO WASHING MACHINE

COLOR FASTNESS TO WASH MACHINE

Color fastness to washing machine refers to a fabric’s resistance to fading or bleeding when subjected to washing processes. This test measures how well the dye or colorant stays on the fabric when exposed to water, detergent, heat, and mechanical action—conditions typically found in household or industrial washing machines. Purpose of Color fastness to washing machine - To evaluate the durability of dyed or printed textiles during laundering.- Essential for determining fabric quality and suitability for end-use (e.g., clothing, upholstery). Test Method Usually based on international standards such as: - ISO 105-C06 - AATCC 61- IS 3361- AATCC 28/61/132/151/190, BS 1006 C01-C05, ISO 105 Part C01-C06/C08/D01, M&S C4/C5/C10A/P3B, FTMS 191-5610, NEXT TM2/3/5, GB/T 5711/3921 Procedure (Simplified)1. Sample Preparation:   - A fabric specimen is stitched with undyed adjacent fabrics (usually cotton or wool).2. Washing:   - Washed in a laboratory washing machine using standard detergent, water, and specific temperature/time settings (e.g., 40°C for 30 minutes).
  1. Drying: - After washing, the sample is dried, typically air-dried or tumble-dried.4. Evaluation: - Color change and staining on adjacent fabrics are assessed using a gray scale (1 to 5 scale; 5 = no change, 1 = severe change).   - Results may also be evaluated visually under standard lighting.
Types of Color fastness to washing machine Tests Domestic laundering (home washing conditions)- Industrial laundering (more intense, commercial cleaning)- Accelerated washing (to simulate multiple washes in less time) Applications- Apparel (especially colored garments)- Home textiles (bed linens, curtains)- Industrial fabrics Would you like to know how to perform this test in a lab setting or check color fastness ratings for specific fabrics? Benefits of Color fastness to washing machine: Ensures Product Quality     - Confirms the durability of dyes and prints during laundering, maintaining the fabric's original appearance.2. Enhances Customer Satisfaction - Reduces complaints and returns caused by fading, bleeding, or color transfer.
  1. Supports Brand Reputation - Reliable color fastness contributes to a premium product image and consistent performance.4. Compliance with Standards - Meets industry requirements (e.g., ISO, AATCC), crucial for export, certifications, and regulatory compliance.
  2. Improves Process Control- Helps identify dyeing or finishing process issues early, leading to better production control.6. Reduces Rework and Waste - Minimizes production losses due to color defects after washing.
  3. Essential for Specific End Uses - Critical for items subject to frequent washing (e.g., uniforms, baby clothes, hospital linens).8. Supports Material Selection - Guides textile manufacturers in choosing appropriate dyes and fabrics for specific applications.
Features of Color Fastness to Washing Machine Test:1. Standardized Testing Methods - Follows international standards like ISO 105-C06, AATCC 61, ensuring consistency and comparability of results.2. Simulated Washing Conditions - Replicates real-world laundering (water, detergent, temperature, mechanical action) in a controlled lab environment.
  1. Assessment of Color Change and Staining- Evaluates both the fabric’s color retention and the staining of adjacent fabrics using grey scales (1 to 5 rating).4. Multi-Fiber Fabric Use - Tests include fabric stitched with adjacent test strips (cotton, wool, etc.) to assess color bleeding onto different fibers.
  2. Multiple Test Options - Includes domestic, accelerated, and industrial washing conditions depending on the end-use of the fabric.6. Temperature and Time Control - Precise control over wash temperature (e.g., 40°C, 60°C) and duration (e.g., 30 mins), simulating specific washing cycles.
  3. Detergent and Additive Use - Uses standardized detergent formulations with/without optical brighteners, and sometimes alkaline or oxidizing agents.8. Reproducible and Quantifiable - Provides repeatable results that can be objectively measured and documented.
  4. Applicability to All Textile Types - Suitable for dyed, printed, or coated fabrics across various fibers (cotton, polyester, blends, etc.).
Model: WF-12 Brand: Dunlin Origin: China Beaker Capacity: 12 Test Scope: Dyed textile product Consumables of Color fastness to washing machine: Specimen Container, Stainless Steel Ball, Stainless Steel Disc, Container Sealing Gasket Specification of Color fastness to washing machine: 1. Test dock: 6 unit 550mL containers + 6 unit 1200mL containers 2. Specimen rack rotation speed: 40±2rpm 3. Capacity of container: 550mL, 1200mL 4. Temperature range: Room temperature to 97ºC 5. Temperature accuracy: ± 0.5ºC
  1. Rate of temperature rise: Maximum speed for 2ºC/min 7. Internal materials: Imported Stainless Steel 316L 8. Control panel: Touch screen
  2. Rack point control function helps to replace containers easily 10. Safety device: Safety door switch, over-temperature protector and dry heating protector 11. Heating media: Distilled water 12. Power supply: AC220V 50Hz 30A
Add to cart
Quick view
Color Matching Cabinet -light Box

Color Matching Cabinet-Light Box

, ,
$0.00

Color Matching Cabinet-Light Box

Color Matching Cabinet-Light Box x

Color Matching Cabinet-Light Box

Color Matching Cabinet -light Box A Color Matching Cabinet-Light box (also known as a Light Box) is a standardized visual assessment tool used to evaluate the color consistency of materials like fabric, paint, plastic, paper, and leather under different lighting conditions. Purpose of Color Matching Cabinet-Light Box : To detect color variations and metamerism (color changes under different lights). Ensures accurate color matching across production batches and materials.   How Color Matching Cabinet-Light Box Works: The cabinet is equipped with multiple standardized light sources (e.g., D65, TL84, UV, CWF, A). Samples are placed inside, and their colors are observed under each light to check for consistency.   Common Light Sources of Color Matching Cabinet-Light Box: D65 – Daylight (standard) TL84 – Store lighting (fluorescent) CWF – Cool white fluorescent UV – Ultraviolet (for fluorescent content) A – Incandescent (home light) U30/U35 – Warm white for showroom lighting     Applications of Color Matching Cabinet-Light Box: Textile and garment inspection Paint and coating industry Plastics and packaging Printing and graphic design   Benefits of Color Matching Cabinet-Light Box: Accurate Color Assessment - Ensures color consistency across products by simulating different lighting conditions. Detects Metamerism - Identifies if colors appear differently under various lights, preventing mismatches. Improves Quality Control - Enhances visual inspection processes in textiles, printing, and packaging.   Standardized Viewing Conditions - Provides consistent light sources for reliable and repeatable evaluations. Reduces Rework and Returns - Helps detect color defects early, saving time and production costs. Supports Industry Standards - Meets international color evaluation standards like ASTM D1729, ISO 3664.   Easy to Use of Color Matching Cabinet -Light Box  - Simple controls with clearly labeled light source buttons. Multiple Light Source Options   - Enables testing under conditions matching retail, daylight, home, and UV lighting. Features of Color Matching Cabinet-Light Box: Multiple Standard Light Sources   - Includes D65 (daylight), TL84 (store light), CWF, UV, A (home light), and optional U30/U35. Digital Hour Meter   - Tracks usage time for each light source to schedule timely replacements. Uniform Light Distribution   - Diffused lighting ensures consistent and shadow-free viewing.   Push Button Control Panel- Easy switching between different light sources. No Warm-Up Time - Instant-on lighting allows immediate use. Sturdy Metal Body - Durable and well-coated to reduce light reflection and distortion. Viewing Area Markings - Guides for proper sample placement and comparison. Optional Dimming Function - Adjustable light intensity (in advanced models) for fine-tuned observation.   Standardized Viewing Angles  - Ensures observer views samples under consistent angles for accurate color judgment.   Description of Color Matching Cabinet-Light Box Color Matching TILO 2 Feet 5/6 Option Light Box Cabinet (P60-5/6) TILO 2 Feet 5/6 Option Light Box Cabinet (P60-5/6) is equipped with 5 light sources. The consistency of the light sources in all Tilo Color Assessment Cabinets gives excellent viewing conditions for reliable color critical decisions under consistent lighting. TILO 2 Feet 5 Option Light Box Cabinet (P60-5) can be applied to the industries that need to perform color difference testing as follows: as the premiere designer and manufacturer of color matching instrument products for the Graphic arts, Photographic, Textile, Dyeing, Packaging, Printing, Leather, Inks, Knitwear, Plastic, Automotive and Ceramics industries. TILO 2 Feet 5 Option Light Box Cabinet (P60-5) offers an exact and dependable way to survey colors beneath different lighting conditions. This apparatus is planned to offer assistance experts in the material, paint, and plastic businesses to coordinate and assess colors with exactness. This high-quality item in Bangladesh at the best cost. The color Cabinet box permits for an ideal seeing environment for color inspection. Features of TILO 2 Feet 5 Option Light Box Cabinet (P60-5) Multiple Light Sources of Color Matching Cabinet-Light Box The lTILO 2 Feet 5 Option Light Box Cabinet (P60-5) incorporates a assortment of light sources. These sources can reenact common sunshine, tungsten, and other counterfeit lighting conditions. By changing light sources, clients can compare colors in diverse situations, guaranteeing precise results. Adjustable Light Intensity of Color Matching Cabinet-Light Box The color coordinating light box highlights flexible light concentrated. You can control the brightness to coordinate distinctive real-world conditions. It guarantees a more point by point investigation of how colors alter beneath different lighting intensities. Compact and Solid Design This color appraisal cabinet comes in a compact plan, making it simple to put in any workspace. Its strong structure guarantees long-term utilize, indeed in requesting environments. Precise Color Evaluation The light box gives a controlled environment that makes a difference clients assess colors in a steady way. This highlight is particularly valuable in businesses where correct color coordinating is basic, such as in materials or paints. Energy Efficient The color cabinet is outlined to be energy-efficient. It employments Driven lights that devour less control whereas still advertising dependable and precise color assessment. Simple Client Interface The user-friendly interface of the color coordinating cabinet makes it simple for anybody to work. The controls are straightforward, and clients can alter settings effortlessly. Portable Design The color coordinating light box is lightweight, making it simple to move from one area to another. This movability is particularly valuable when you require to take the cabinet to diverse parts of the generation floor or to different client locations. Ideal for Different Industries Whether you work in materials, car, or fabricating, the color appraisal cabinet offers the exactness and unwavering quality required for color coordinating. It ensures consistency over distinctive materials and generation lines. FEATURES Certified by ASTM D1729, ISO3664, DIN, ANSI and BSI. Automatic changeable into another light source by switching. Usage time display, name of lamp, total number of switches for each. Violated time sensor for tracking lamp service or replacement. Large display & individual switch, easy to operate each light source. No warm-up time, just plug and play. The energy-saving device which generates lower heat & high efficiency. The name of the light source can be changed. SPECIFICATION OF TILO 2 FEET 5 OPTION LIGHT_BOX CABINET (P60-5) Name Details Model P60(5) Brand TILO Origin Hong Kong Dimensions (WxDxH) (710 x 405 x 570)mm Standards ASTM D1729, ISO3664, DIN, ANSI and BSI Light source Five light source. Power Source Electric. Voltage 220 ~ 240V Body Material Fiber-reinforce Warranty One year free service LIGHT SOURCE OF TILO 2 FEET 5 OPTION LIGHT_BOX CABINET (P60-5) Light Source Color viewing applications / Uses of Light Color Temp. (K) Power (W) Brand Info Quantity D65 International standard Artificial Daylight / Natural Daylight 6500 18 PHILIPS; TL-D/18-965 2 Pieces TL84 Applied to stores in Europe, Japan and China 4000 18 PHILIPS; TL-D/18-840 2 Pieces F “Sun-setting Light Yellow” incandescent light source 2700 40 PHILIPS 4 Pieces UV ultraviolet light to detect and evaluate optical brighteners or fluorescent pigments Wave length: 365nm 20 PHILIPS 18W BLB 1 Pieces CWF (Cool White Fluorescent) American Standard 4150 18 PHILIPS; TL-D/18-640 2 Pieces      
Add to cart
Quick view
Controller For IR Dyeing Machine
Color Matching Cabinet -light Box

Controller For IR Dyeing Machine

,
$0.00
Controller For IR Dyeing Machine
Controller For IR Dyeing Machine

IR Dyeing machine controller

Controller For IR Dyeing Machine offers exceptional quality .purchasing of our controller provides cost efficiencies, and customization options enabling you to meet your specific requirements comfortably. Collaborate with program A Controller for IR Dyeing Machine is a specialized control system designed to manage and automate the dyeing process in textile manufacturing, particularly using infrared heating technology. These controllers are crucial for achieving consistent dye quality, reducing energy consumption, and optimizing the dyeing process.   Key Features of an Controller For IR Dyeing Machine :
  1. Temperature Control:- Precisely regulates the infrared heaters to maintain uniform temperature across the dye bath. - Supports customizable heating curves (ramp-up, hold, and cool-down phases).
  2. Programmable Logic Control (PLC): - Allows operators to set and automate dyeing programs for different fabrics and dye types. - Supports multiple recipes or programs for different batches.
 
  1. Real-Time Monitoring and Feedback: - Monitors parameters like temperature, fabric rotation, bath circulation, and timing. - Provides real-time data and alarms for deviations.
  2. Touchscreen Interface / HMI (Human Machine Interface): - User-friendly interface for configuring and monitoring processes. - Multi-language support and graphical display of process curves.
 
  1. Data Logging and Traceability: - Records process data for quality control and traceability.
  2. Energy Efficiency Optimization: - Manages IR heater output to reduce energy usage. - Often includes features for auto shut-off or idle mode.
 
  1. Safety Features: - Includes emergency stop, over-temperature protection, and fault detection systems. 8. Connectivity: - Modern controllers may support Ethernet, Modbus, or other industrial communication protocols for integration into factory automation systems.
  Using A Controller For IR Dyeing Machine provides several benefits, especially in textile manufacturing where precision and efficiency are critical. Here are the key advantages:
  1. Improved Dyeing Accuracy and Consistency
- Maintains precise temperature control and timing, ensuring uniform dye uptake across the fabric. - Reduces color variation between batches.  
  1. Enhanced Energy Efficiency- Infrared heating is more energy-efficient than traditional heating methods.- The controller optimizes energy use by adjusting the IR output based on process needs, reducing overall energy consumption.
 
  1. Time Savings- Faster heating and cooling cycles due to infrared technology.- Automated processes reduce manual intervention and cycle times. 4. Better Process Control- Programmable dyeing cycles and precise control over each stage (heating, dyeing, rinsing, cooling).- Real-time monitoring and adjustments improve reliability.
 
  1. Reduced Water and Chemical Usage- More efficient dye penetration and fixation mean less water and fewer chemicals are needed for reprocessing or corrections.6. Lower Operational Costs
- Energy savings, reduced rework, and lower labor input contribute to cost efficiency. - Minimizes fabric damage, reducing material waste.  
  1. Enhanced Safety Built-in alarms, emergency shut-off and automatic fault detection enhance operational safety.8. Data Logging and Traceability- Ability to record and review dyeing process data helps in quality control and troubleshooting.- Facilitates compliance with industry standards and audits.
 
  1. User-Friendly Operation- Modern touchscreen interfaces make it easier for operators to manage and monitor processes.- Multilingual support and visual feedback enhance usability.
 
Add to cart
Quick view
Counting Balance-Weighing Scale
Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

, ,
$0.00

Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

  A Counting Balance-Weighing Scale (or Counting Weighing Scale) is a precision electronic scale designed to weigh items and simultaneously count them based on individual piece weight. It’s commonly used in industries for inventory management, packaging, and quality control.   Purpose of Counting Balance-Weighing Scale: To quickly and accurately count small items like buttons, beads, screws, or pills by weight. Eliminates manual counting, especially for large quantities.   Working Principle of Counting Balance-Weighing Scale: Weigh a sample quantity of items to determine the average weight of one piece. Place a bulk quantity on the scale. The scale divides the total weight by the unit weight to calculate the total item count.     Applications of Counting Balance-Weighing Scale: Textile accessories (buttons, rivets) Hardware (nuts, bolts, washers) Electronics (resistors, chips) Pharmaceuticals (tablets, capsules) Benefits of Counting Balance-Weighing Scale:   Fast and Accurate Counting - Saves time by quickly counting large quantities of small items. Reduces Human Error- Eliminates mistakes common in manual counting. Improves Productivity - Speeds up packing, inventory, and quality control processes. Versatile Use - Suitable for various industries: textiles, hardware, pharmaceuticals, electronics.   Cost-Efficient- Reduces labor costs and improves operational efficiency. Compact and Portable - Easy to move and use in different workstations. Dual Functionality - Can be used for both counting and standard weighing. Memory and Tare Functions - Stores unit weights and allows container weight deduction.   Features of Counting Balance-Weighing Scale: High Precision Sensors- Ensures accurate weight and count, even for tiny components. Digital Display- Separate displays for total weight, unit weight, and piece count. Tare Function - Allows deduction of container weight for net measurements. Memory Function - Stores frequently used unit weights for fast recall.   Multiple Units Support- Measures in grams, kilograms, pounds, etc. Sample Size Selection- Users can set sample sizes (e.g., 10, 20, 50 pcs) to calculate piece weight. Overload Protection- Prevents damage from excessive weight. Auto Calibration - Maintains long-term accuracy with internal or external calibration options. Sturdy Platform- Stainless steel pan with anti-slip design for stable weighing. Battery and AC Operation- Can run on rechargeable batteries or power adapter.   How to Use Counting Balance-Weighing Scale: Turn On the Scale - Power it on and wait for the display to stabilize at zero. Tare the Container - Place an empty container on the pan and press the "TARE" button to zero out its weight. Set Sample Size - Place a known quantity (e.g., 10 or 20 pcs) of identical items on the scale. - Enter the sample quantity using the keypad. Confirm Unit Weight - The scale calculates and stores the average unit weight automatically. Add Bulk Items - Add the rest of the items into the container. - The display will show the total count based on the stored unit weight. Record Results   - Note down the total piece count and remove the items. Turn Off After Use - Power off the scale to save battery or electricity.     Counting Balance /Weighing Scale Model : DS610C Brand : DIGISCALE Origin : Germany Capacity : 3 kg Division : 0.1g Min Weight : 0.5g Grade : Class 3 Platter : 280 × 215mm Battery : Rechargeable Battery with AC Adaptor Display : Double Large LCD Display Warranty : One Year Service Warranty SPECIFICATION Build With 5 Measuring Units: kg, g, lb, oz, PCS Count Platter : 280 × 215mm Quality : Heavy Duty Premium Quality Product Net / Gross Weight : 3080g / 3130g Battery : Rechargeable Battery with AC Adaptor Battery Capacity: 6V 4.5Ah / 20 HR Adaptor Power Input : AC 220V-240V / 50Hz Adaptor Power Output : 10V DC/ 500mA Display : Double Large LCD Display Color : White-Gray Keyboard : 20 Members Key Operating Temperature : 0-40°C (32-104°F) FEATURES Auto Zero Tracking Automatic Overload Display Grade Class 3 Auto Backlight Double LCD Display Low Battery Indication Rechargeable Battery with Adaptor Save Electricity Advantage Piece Counting Functionality: The DS603C Counting Weighing Scale is prepared with an precise piece checking highlight, perfect for stock administration, generation lines, and quality control assignments. This guarantees you can tally things like screws, jolts, or other little components efficiently. High-Precision Digital Scale Display: The advanced scale show gives clear and precise readings, making it simple to screen weight and amount. Its shinning and natural interface guarantees ease of use in diverse lighting conditions. Digital Scale Calibration: To keep up exactness, the DS610C weighing scale calibration prepare is direct, guaranteeing the scale remains dependable over time. Normal weight scale calibration ensures reliable execution, indeed with overwhelming use. Durable and Reliable Build: The DS610C advanced weight scale is created with strong materials to withstand visit utilize in requesting situations, such as stockrooms and fabricating facilities. Versatility: As a weighing and tallying scale, it combines the benefits of weight estimation and piece tallying in one gadget. This makes it appropriate for a wide extend of applications, from retail to mechanical uses. Categories: Digital Scale and Balance, Piece Counting Scale, Table Top Scale
Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

 
Add to cart
Quick view
Product
Fatigue tester for Elastic fabric

Fatigue tester for Elastic fabric

,
$0.00

Fatigue Tester for Elastic Fabric

Fatigue tester for Elastic fabric

Fatigue tester for Elastic fabric

  A Fatigue Tester for Elastic Fabric is a specialized instrument designed to evaluate the durability and performance of elastic materials, such as elastic bands, tapes, and fabrics, under repeated stretching and relaxation cycles. This testing is crucial for applications where elastic materials are subjected to continuous or repetitive stress, ensuring they maintain their functionality over time.   Purpose Fatigue Tester for Elastic Fabric The primary objective of this tester is to simulate the conditions that elastic fabrics endure during actual use. By repeatedly stretching and relaxing the material, the tester assesses:   - Elastic Recovery: The ability of the material to return to its original length after stretching. - Fatigue Resistance: How well the material withstands repeated cycles without significant degradation. - Durability: The lifespan of the elastic properties under continuous use.   Working Principle of Fatigue Tester for Elastic Fabric The tester operates by clamping a specimen of the elastic fabric and subjecting it to cyclic stretching and relaxation.   Key operational features include: Cycle Count: The number of stretching and relaxation cycles is set according to testing requirements. - Speed Regulation: The rate of stretching can be adjusted to simulate different usage conditions. - Monitoring: The tester records data such as the number of cycles completed and any changes in the fabric's properties.   For instance, the Elastic Band Fatigue Tester ADL-FT01 features a high-speed linear slide, servo motor, and touch screen control software, allowing precise control over stretching parameters   Key Specifications of Fatigue Tester for Elastic Fabric While specifications may vary among different models, common parameters include: - Stretch Percentage: Adjustable from 0% to 100%. - Stretching Speed: Up to 40 cycles per minute. - Sample Length Range: Maximum of 260mm. - Cycle Count Capacity: Up to 9,999,999 cycles. - Control Interface: Typically a 7-inch color touch screen. - Power Supply: AC220V 50Hz/60Hz. These features enable comprehensive testing of elastic materials under various conditions.   Benefits of Fatigue Tester for Elastic Fabric - Quality Assurance: Ensures that elastic materials meet required durability standards. - Product Development: Aids in the design of materials with improved fatigue resistance. Cost Efficiency: Identifies potential material failures early, reducing product returns and warranty claims. - Compliance: Helps manufacturers adhere to industry standards such as GB/T 37635.   Applications of Fatigue Tester for Elastic Fabric Fatigue testers for elastic fabrics are widely used in: - Textile Manufacturing: Testing elastic components in garments, such as waistbands and cuffs. - Medical Textiles: Evaluating the durability of elastic materials used in bandages and supports. - Automotive Industry: Assessing elastic components in car interiors. - Research and Development: Developing new elastic materials with enhanced properties.   Features of Fatigue Tester for Elastic Fabric:
  1. Adjustable Stretch Range - Allows setting stretch levels (e.g., 0–100%) to simulate real-life fabric use.
  2. High-Cycle Capability - Supports up to millions of stretch-relax cycles for long-term fatigue analysis.
  3. Touch Screen Control - 7-inch color display for easy setup, monitoring, and data entry.
  4. Servo Motor Driven - Ensures precise and smooth linear motion during testing.
 
  1. Customizable Speed - Adjustable test speed (e.g., up to 40 cycles per minute) based on test requirements.
  2. Multi-Sample Testing - Some models allow testing multiple specimens simultaneously.
  3. Cycle Counter with Alarm - Built-in counter with programmable stop after preset cycles and auto-alert feature.
 
  1. Durable Construction - Robust metal frame suitable for continuous testing in lab environments.
  2. Standard Compliance - Designed to follow standards like GB/T 37635 for elastic fabric testing.
  How to Use Fatigue Tester for Elastic Fabric:
  1. Prepare the Sample
- Cut the elastic fabric to the specified size (e.g., 260 mm max length). - Mark the gauge length if needed for measurement after testing.
  1. Mount the Sample - Secure both ends of the fabric in the upper and lower clamps.
  2. Set Test Parameters
- Enter the desired stretch percentage (e.g., 50%). - Set the number of cycles and speed (e.g., 30 cycles/min). - Adjust dwell time if required (time fabric stays stretched).  
  1. Start the Test - Press start on the touch screen interface. - The machine will cyclically stretch and release the sample.
  2. Monitor Progress - Observe operation or let it run automatically.
- Machine stops automatically after reaching the set cycles.
  1. Remove and inspect - Take out the fabric and measure elongation, recovery, or visual defects.
  2. Record and Compare Results - Compare with initial measurements or standard performance criteria.
    Fatigue tester for Elastic fabric

    Fatigue tester for Elastic fabric

   
Add to cart
Quick view
Stretch Recovery Tester (Static Method)

Stretch Recovery Tester Static Method

,
$0.00

Stretch Recovery Tester Static Method 

Stretch Recovery Tester (Static Method)

Stretch Recovery Tester

  A Stretch Recovery Tester Static Method is a lab instrument used to evaluate the stretch ability and recovery properties of fabrics, elastomers, or other stretchable materials. This method is crucial in textiles and material science to assess how well a material returns to its original shape after being stretched. Key Functions of Stretch Recovery Tester Static Method : - Measures elongation under a fixed force or length. - Assesses the recovery percentage after a specified recovery time once the force is removed. - Evaluates fabric's resilience, durability, and comfort properties. How It Works Stretch Recovery Tester  Static Method:
  1. A sample is stretched to a predetermined extension or force.
  2. The stretch is maintained for a set period.
  3. After removing the load, the recovery (return to original length) is measured after a fixed time.
  4. The fabric sample is clamped and stretched to a specific length or force.
  5. It’s held for a fixed duration (e.g., 1–5 minutes).
  6. The tension is released, and the sample is allowed to recover.
  7. The recovered length is measured after a set time.
Main Components: - Fixed clamps to hold the sample. - Movable clamps for stretching. - Precision scale or ruler for measuring elongation and recovery. - Timing device (manual or digital) to control stretching and recovery periods. - To assess elastic recovery and dimensional stability after stretching. Applications: - Used in testing knitwear, sportswear, elastic fabrics, and compression garments. - Helps in product development and quality assurance. Stretch Recovery Tester Static Method is designed to determine the stretch recovery property of elastic material by static method. 2.0mm thickness stainless steel frame and base board, makes the tester firm and stable. Sample holder can be slid along the guide rail smoothly and can be fixed at any position of the rail. Test Scope：elastomeric material Testing Standards：ASTM D2594、ASTM D3107, etc. key features of a Stretch Recovery Tester Static Method: Adjustable clamps and measurement scale. - Timer for accurate stretch/recovery periods. - Simple mechanical design for ease of use. ✅ 1. Manual or Semi-Automatic Operation - Allows controlled stretching and recovery measurements. - Simple setup for routine quality control. ✅ 2. Adjustable Clamp System - Securely holds samples of various sizes and thicknesses. - Ensures consistent test conditions. ✅ 3. Precision Measurement Scale - Provides accurate readings of elongation and recovery length. - Often graduated in millimeters or inches. ✅ 4. Sturdy Frame - Made of corrosion-resistant metal or coated steel. - Ensures durability and stability during testing. ✅ 5. Time Control Support - Timer to monitor stretch and recovery durations. - Helps standardize test procedures. ✅ 6. Compact Design - Space-saving for lab environments. - Easy to move and operate. ✅ 7. Compliance with Standards - Often designed to meet standards like ASTM D3107 or BS 4294. Would you like a comparison with the dynamic method or specifications for a particular model? key benefits of using a Stretch Recovery Tester Static Method: ✅ 1. Accurate Fabric Performance Analysis- Provides reliable data on stretch and recovery, critical for assessing elasticity and fit. ✅ 2. Easy to Operate- Simple, manual setup makes it ideal for routine testing and quality control. ✅ 3. Cost-Effective- More affordable than dynamic testers, making it suitable for smaller labs or production units. ✅ 4. Standardized Testing- Supports industry-standard methods (e.g., ASTM D3107), ensuring consistency across tests. ✅ 5. Versatile Applications- Suitable for testing knit fabrics, elastic bands, spandex materials, and other stretchable textiles. ✅ 6. Durable and Low Maintenance- Mechanically straightforward with minimal upkeep required. ✅ 7. Enhances Product Development- Helps designers and manufacturers optimize materials for comfort, performance, and durability. Applications: - Textile R&D - Production quality control
Stretch Recovery Tester (Static Method)

Stretch Recovery Tester

- Evaluating materials for comfort, durability, and fit Stretch Recovery Tester Diller In Bangladesh, Stretch Recovery Tester Importer In Bangladesh, Stretch Recovery Tester in Bangladesh, Stretch Recovery Tester in Bd, Stretch Recovery Tester In Uttara, Stretch Recovery Tester Price in Bangladesh, Stretch Recovery Tester Supplier in Bangladesh  
Add to cart
Quick view
Pantone Book

Pantone book

,
$0.00

Pantone Book

Pantone Book

Pantone Book

  A Pantone Book, commonly referred to as a Pantone Color Guide, is a professional color matching tool used across industries like graphic design, fashion, printing, packaging, and product manufacturing. It helps ensure consistent color communication from design to final production.   What It Does? - Displays standardized Pantone colors in fan-deck or chip book format. - Provides color codes, ink formulas, and finish types for accurate color replication.     Types of Pantone Books:
  1. Formula Guide (Solid Coated & Uncoated) – For spot color printing.
  2. Color Bridge – Shows Pantone spot colors alongside CMYK equivalents.
  3. Pantone Fashion, Home + Interiors (FHI) – For textiles, soft goods, and home decor.
  4. Pantone CMYK and Pastels & Neons Guides – For process printing and special effect colors.
  ⚙️ Features of Pantone Book: - Thousands of pre-defined colors. - Ink mixing formulas (for printers). - Available in coated, uncoated, and matte finishes. - Some include digital tools or access to Pantone Connect software.   ✅ Benefits of Pantone Book: - Ensures accurate color matching across designers, clients, and manufacturers. - Supports branding consistency across all printed and physical materials.   key benefits of using a Pantone Book: ✅ 1. Accurate Color Communication- Ensures consistent color matching between designers, printers, and manufacturers—globally. ✅ 2. Industry Standard- Trusted across printing, fashion, packaging, and branding for reliable color references.   ✅ 3. Saves Time and Reduces Errors - Eliminates guesswork in color approval, helping avoid costly reprints or corrections. ✅ 4. Versatile Applications - Supports multiple media types: print, fabric, plastics, digital design, etc. ✅ 5. Real-World Color View - Physical swatches show true ink or dye appearance, which digital screens can’t replicate accurately.   ✅ 6. Ink Mixing Formulas - Provides exact mixing guides for printers to replicate spot colors precisely. ✅ 7. Global Consistency - Helps maintain brand color consistency across international production sites.   key features of a Pantone Book: 1. Standardized Color System - Includes thousands of pre-defined Pantone Matching System (PMS) colors with unique codes. 2. Multiple Finish Types - Available in Coated (C), Uncoated (U), Matte (M) formats to match different printing surfaces.   3. Fan Deck or Chip Format - Comes in portable fan-deck or tear-away chip books for easy reference and sharing. 4. Ink Mixing Formulas - Provides precise ink formulas for each color, ideal for print production. 5. Specialized Editions - Guides tailored for graphic design, textiles (FHI), plastics, and digital design.   6. Cross-Media Consistency - Ensures uniform color across print, web, fabric, and packaging. 7. Digital Integration - Many books include access to Pantone Connect for digital workflow and color data sync.   Here’s a simple guide on how to use a Pantone Book effectively: ✅ 1. Choose the Right Pantone Book - Use Formula Guide for print. - Use FHI (Fashion, Home + Interiors) for textiles. - Use Color Bridge to compare spot colors with CMYK.   ✅ 2. Select the Color - Flip through the fan deck or chip book to find the desired color. - Note the Pantone code (e.g., Pantone 186 C for coated paper). ✅ 3. Communicate the Code - Share the Pantone number with printers, manufacturers, or team members to ensure consistent color use.   ✅ 4. Use the Right Finish - Make sure you're referencing coated, uncoated, or matte depending on your final material. ✅ 5. Compare to Printed Proofs - Use the physical Pantone swatch to check if print proofs or samples match. ✅ 6. Maintain Lighting Consistency - View colors under standard lighting (D50) for accurate color judgment.   ✅ 7. Store Properly - Keep the Pantone book in a cool, dry place and replace it every 12–18 months to avoid fading.   Pantone offers a diverse range of color guides tailored to various industries and applications. Here's an overview of the main Pantone book models:     Pantone Graphics & Print Guides  
  1. Formula Guide (Solid Coated & Uncoated)
- Features over 2,390 spot colors with corresponding ink formulations. - Essential for branding, packaging, and print design. - Provides accurate color matching for solid colors.  
  1. Color Bridge Guide (Coated & Uncoated)
- Displays side-by-side comparisons of Pantone spot colors and their closest CMYK equivalents. - Includes CMYK, RGB, and HEX values for digital and print consistency. - Ideal for projects requiring color translation across different media.  
  1. CMYK Guide (Coated & Uncoated)
- Contains a comprehensive range of CMYK colors. - Useful for four-color process printing without spot colors. - Helps in selecting colors achievable through standard CMYK printing.  
  1. Pastels & Neons Guide
- Offers a collection of soft pastel and vibrant neon colors. - Suitable for creative projects in fashion, print, and packaging. - Provides unique color options for special design applications.  
  1. Metallics Guide
- Features metallic spot colors for premium print finishes. Ideal for luxury packaging, branding, and high-end print materials. - Adds a sophisticated touch to printed designs.   Pantone Fashion, Home + Interiors (FHI) Guides
  1. FHI Color Guide (TPG – Paper)
- Contains a wide range of colors for non-fabric materials. - Used in product design, cosmetics, and interiors. - Provides color inspiration for various applications.  
  1. FHI Cotton Passport & Cotton Planner (TCX – Textile)
- Offers colors on cotton fabric swatches. - Essential for textile and apparel design. - Ensures accurate color communication in fabric production.  
  1. FHI Polyester Swatch Book
- Includes colors on polyester fabric. - Useful for sportswear, footwear, and synthetic textiles. - Provides color options specific to polyester materials.   Pantone Specialty Guides  
  1. Pantone SkinTone Guide
- Features a range of skin tone colors. - Used in cosmetics, healthcare, and product development. - Aids in creating products that match diverse skin tones.  
  1. Pantone Plastic Standard Chips
- Provides color references on plastic substrates. - Essential for industrial design, consumer electronics, and appliances. - Ensures color accuracy in plastic product manufacturing.   Pantone Bundles & Studio Sets   - Portable Guide Studio - A comprehensive set including multiple Pantone guides. - Designed for professionals needing a wide range of color references. - Convenient for on-the-go color selection and matching.   - Essentials Set - Combines key Pantone guides into one package. - Ideal for designers seeking a versatile color toolkit. - Offers a cost-effective solution for comprehensive color needs.   Each Pantone guide serves specific purposes across different industries. Selecting the appropriate guide depends on your project's requirements and the materials involved.
Pantone Book

Pantone Book

 
Add to cart
Quick view
digital-precision-balance

Digital precision balance

,
$0.00

digital precision balance

digital-precision-balance

2/3/4/5 Digit Digital precision Balance

digital precision balance is a weight balance machine. It’s used to Low capacity balance. digital precision balance  play an important role to accurate measurement. Digital precision balance is used to check weight paper, jewelry etc. It shows accurate result. We have the best collection of digital precision balance. MAAM TEX IS the best supplier of Precision Balance in Bangladesh
A Digital Precision Balance is a high-accuracy electronic weighing device used in laboratories, industries, and educational institutions for measuring mass with a high degree of precision. It is essential for tasks that require meticulous weight measurements, such as chemical analysis, formulation, and quality control. Key Features:
  1. High Accuracy & Precision: - Typically offers readability from 0.1 g to 0.001 g (or even finer). - Ideal for weighing small amounts of material where accuracy is crucial.
  2. Digital Display: - Large, backlit LCD or LED display for easy reading. - Some models include touch screen interfaces.
  3. Tarring Function: - Allows you to subtract the weight of a container or packaging to get the net weight.
  4. Calibration: - Internal or external calibration to maintain accuracy over time. - Some advanced models have auto-calibration features.
  5. Weighing Units: - Supports multiple units like grams (g), milligrams (mg), carats (ct), and ounces (oz). Stable Platform:   - Includes a draft shield to protect against air currents and vibrations, which can affect measurement accuracy.
Common Applications:- Laboratory Analysis: Precise measurement of chemicals and reagents.- Pharmaceuticals: Formulation and quality control.- Jewelry: Accurate measurement of precious metals and stones.- Education: Scientific experiments in schools and universities. Benefits:- Reliable and Consistent Measurements- User-Friendly Operation- Compact Design with Minimal Footprint- Improved Workflow Efficiency- Enhanced Data Handling (USB or RS232 ports for data transfer in advanced models) Benefits of digital precision balance Here are the key benefits of using a Digital Precision Balance:
  1. High Accuracy and Precision- Delivers extremely accurate weight measurements, often down to 0.001 g or better.- Crucial for experiments and applications where even slight variations can affect outcomes.
 
  1. User-Friendly Interface- Digital display makes readings easy to read and interpret.- Most models include intuitive controls for functions like tarring, unit conversion, and calibration.3. Speed and Efficiency- Provides instant, stable readings, saving time compared to manual or mechanical balances.- Streamlines lab workflows and enhances productivity.
  2. Versatile Applications- Suitable for various fields including chemistry, biology, pharmacology, food testing, and gemology.- Can handle diverse weighing tasks from solids to liquids and powders.
  3. Advanced Features- Tare Function: Subtracts the weight of containers automatically.- Multiple Weighing Units: Supports various measurement units.- Data Connectivity: Many models allow connection to computers or printers for data logging.
  4. Portability and Space Efficiency- Compact design fits easily in most laboratory setups.- Lightweight models are easy to move and store.
  5. Enhanced Safety and Reliability- Stable platform and draft shields reduce environmental interference.- Built-in calibration ensures ongoing accuracy.
Here’s a step-by-step guide on how to use a Digital Precision Balance safely and accurately: 1. Set Up the Balance- Place the balance on a stable, vibration-free, and level surface.- Avoid placing near fans, windows, or air vents to prevent air drafts.- Allow the balance to warm up (usually 15–30 minutes) if it has just been turned on. ⚙️ 2. Calibrate the Balance - If it’s manual calibration, use certified calibration weights. - For auto-calibration models, follow on-screen instructions. - Calibration ensures accuracy in measurements. ⚖️ 3. Tare the Balance - Place the container or weighing paper on the balance. - Press the “Tare” or “Zero” button to set the display to zero. This subtracts the container’s weight. 4. Weigh the Sample - Carefully add the sample into the container. - Wait for the reading to stabilize (usually indicated by a stable icon or beep). - Read the weight from the digital display. 5. Repeat or Change Units (if needed) - You can press the unit button to switch between grams, milligrams, ounces, etc., depending on your needs.   6. Clean After Use - Remove any spilled substances. - Wipe the surface with a soft, lint-free cloth. Do not use harsh chemicals unless specified by the manufacturer. ⚠️ Tips for Best Use: - Avoid touching the container with bare hands (use tweezers or gloves to avoid adding extra weight from oils or moisture).- Use a draft shield if available to minimize airflow interference.- Do not overload the balance beyond its maximum capacity—it can damage the sensors.
Add to cart
Quick view
Digital hot plate-magnetic stirrer
Color Matching Cabinet -light Box

Digital hot plate-magnetic stirrer

,
$0.00

Digital hot plate-magnetic stirrer

Digital hot plate-magnetic stirrer

Digital hot plate-magnetic stirrer

  A digital hot plate-magnetic stirrer is a laboratory device that combines two essential functions: heating and stirring. It is widely used in chemistry, biology, and physics laboratories for preparing solutions, mixing chemicals, and conducting experiments that require controlled heating and stirring. Model : (DL-300) Brand : DUNLIN Origin : TAIWAN Set-up plate Dimensions : Ø 135 mm Motor type : DC Motor Speed range : 0-1500 rpm Display : 5 Inch LED Display Heating temperature range : Room Temp. 0-280°C Temperature display : 5 Inch LED Display Temperature display accuracy : ±0.1 Protection class according to DIN EN 60529 : IP42 Power Supply : 200-240V 3A Dimensions ( W x D x H ) : ( 255 x 152 x 80 ) mm Key Components of Digital hot plate-magnetic stirrer: Hot Plate (Heating Element): - Provides a flat surface that heats up electrically. - Controlled via a digital interface for setting precise temperatures. - Often features over-temperature protection for safety.
  1. Magnetic Stirrer:
- Uses a rotating magnetic field to spin a magnetic stir bar placed in the liquid. - Ensures even mixing of the solution without manual stirring. - Speed can be adjusted digitally.  
  1. Digital Display and Controls:
- Allows precise setting of temperature and stirring speed. - Typically includes an LCD or LED screen. - Some models have programmable settings and timers.  
  1. Temperature Sensors:   - Built-in or external probes (like a PT100 or thermocouple) for accurate temperature control.
  Features of Digital hot plate-magnetic stirrer: - Temperature Range: Usually ranges from ambient to 300°C or higher. - Stirring Speed: Typically ranges from 100 to 1500 RPM. Material: The top plate is often made from ceramic, aluminum, or stainless steel to ensure durability and chemical resistance.   Applications Digital hot plate-magnetic stirrer: - Dissolving solids in liquids. - Heating samples while stirring to ensure uniform temperature distribution. - Conducting chemical reactions that need constant stirring and controlled heat. - Biological and pharmaceutical sample preparation.     Benefits of using a Digital Hot Plate & Magnetic Stirrer in laboratory and industrial settings:
  1. Precision and Control- Digital Interface: Allows accurate setting and monitoring of temperature and stirring speed.- Consistent Results: Ensures reproducibility in experiments and solution preparations.
 
  1. Efficient Mixing and Heating- Uniform Mixing: Magnetic stirring eliminates hotspots and ensures even distribution of solutes.- Simultaneous Operation: Ability to heat and stir at the same time improves efficiency.
 
  1. Safety Features- Overheat Protection: Prevents accidents by automatically shutting off at unsafe temperatures.- Sealed Surface: Reduces risk of contamination and easy to clean.
 
  1. Versatility
- Suitable for a wide range of applications including chemical synthesis, biological experiments, and pharmaceutical processes.- Compatible with various types of containers and volumes.  
  1. Compact and User-Friendly- Takes up minimal bench space.- Simple to operate with user-friendly controls and displays.
  2. Durability- High-quality materials like ceramic or stainless steel tops resist corrosion and wear.
  3. Time-Saving Speeds up preparation of solutions and reactions compared to manual stirring and separate heating. Would you like these benefits presented in a slide format or for a product brochure?
Add to cart
Quick view
Controller For IR Dyeing Machine
Color Matching Cabinet -light Box

Controller For IR Dyeing Machine

,
$0.00
Controller For IR Dyeing Machine
Controller For IR Dyeing Machine

IR Dyeing machine controller

Controller For IR Dyeing Machine offers exceptional quality .purchasing of our controller provides cost efficiencies, and customization options enabling you to meet your specific requirements comfortably. Collaborate with program A Controller for IR Dyeing Machine is a specialized control system designed to manage and automate the dyeing process in textile manufacturing, particularly using infrared heating technology. These controllers are crucial for achieving consistent dye quality, reducing energy consumption, and optimizing the dyeing process.   Key Features of an Controller For IR Dyeing Machine :
  1. Temperature Control:- Precisely regulates the infrared heaters to maintain uniform temperature across the dye bath. - Supports customizable heating curves (ramp-up, hold, and cool-down phases).
  2. Programmable Logic Control (PLC): - Allows operators to set and automate dyeing programs for different fabrics and dye types. - Supports multiple recipes or programs for different batches.
 
  1. Real-Time Monitoring and Feedback: - Monitors parameters like temperature, fabric rotation, bath circulation, and timing. - Provides real-time data and alarms for deviations.
  2. Touchscreen Interface / HMI (Human Machine Interface): - User-friendly interface for configuring and monitoring processes. - Multi-language support and graphical display of process curves.
 
  1. Data Logging and Traceability: - Records process data for quality control and traceability.
  2. Energy Efficiency Optimization: - Manages IR heater output to reduce energy usage. - Often includes features for auto shut-off or idle mode.
 
  1. Safety Features: - Includes emergency stop, over-temperature protection, and fault detection systems. 8. Connectivity: - Modern controllers may support Ethernet, Modbus, or other industrial communication protocols for integration into factory automation systems.
  Using A Controller For IR Dyeing Machine provides several benefits, especially in textile manufacturing where precision and efficiency are critical. Here are the key advantages:
  1. Improved Dyeing Accuracy and Consistency
- Maintains precise temperature control and timing, ensuring uniform dye uptake across the fabric. - Reduces color variation between batches.  
  1. Enhanced Energy Efficiency- Infrared heating is more energy-efficient than traditional heating methods.- The controller optimizes energy use by adjusting the IR output based on process needs, reducing overall energy consumption.
 
  1. Time Savings- Faster heating and cooling cycles due to infrared technology.- Automated processes reduce manual intervention and cycle times. 4. Better Process Control- Programmable dyeing cycles and precise control over each stage (heating, dyeing, rinsing, cooling).- Real-time monitoring and adjustments improve reliability.
 
  1. Reduced Water and Chemical Usage- More efficient dye penetration and fixation mean less water and fewer chemicals are needed for reprocessing or corrections.6. Lower Operational Costs
- Energy savings, reduced rework, and lower labor input contribute to cost efficiency. - Minimizes fabric damage, reducing material waste.  
  1. Enhanced Safety Built-in alarms, emergency shut-off and automatic fault detection enhance operational safety.8. Data Logging and Traceability- Ability to record and review dyeing process data helps in quality control and troubleshooting.- Facilitates compliance with industry standards and audits.
 
  1. User-Friendly Operation- Modern touchscreen interfaces make it easier for operators to manage and monitor processes.- Multilingual support and visual feedback enhance usability.
 
Add to cart
Quick view
VeriVide Colour Assessment Cabinets
Color Matching Cabinet -light Box

VeriVide Colour Assessment Cabinets

, ,
$0.00

VeriVide Colour Assessment Cabinets

VeriVide Colour Assessment Cabinets VeriVide offers high-quality Colour Assessment Cabinets (CACs) such as the CAC 60-4, CAC 60-5, and CAC 120-4&5. These cabinets, originating from the UK, are reliable tools for visual evaluation in quality assurance, meeting national, international, and retailer standards. They effectively mitigate issues related to color assessment.VeriVide Colour Assessment Cabinets High-quality visual evaluation tool for quality assurance. Adhering to national, international and retailer standards.Colour Assessment Cabinet's (CACs) reduce problems associated with assessing products or samples in different environments,be though geological or seasonal, offering a cost-effective method to ensure visual accuracy and product quality. Color Light Box Enhance color precision with VeriVide's cutting-edge Colour Assessment Cabinets. These cabinets are meticulously designed to ensure accurate color evaluation in various industries. Invest in VeriVide Colour Assessment Cabinets to elevate your color assessment process.  Enhance Color Precision with VeriVide's Cutting-Edge Assessment Cabinets, which meet or surpass ISO 3664 and BS 950 Part 1 international standards. The cabinets are adaptable to user requirements, with lamp options to choose different light sources. Available in 60, 120, and 150cm widths, VeriVide Colour Assessment Cabinets provide a flexible solution for accurate color assessment. Incorporate user-friendly features like servicing indicator, auto sequence, warm-up, power save and data storage.4 or 5 light source options Versions available for colour fastness testing and particulate testing both adhering to global standardsEnsure  that you are using the best equipment available as they provide the best fluorescent D65 daylight simulator, with the highest Colour   Rendering Index (CRI), available. VeriVide Colour Assessment Cabinets products are known as light boxes, viewing booths, colour cabinets and others, depending on which industry or country they are serving in. They are used within a wide array of industry sectors throughout the world including textile and apparel, graphics, automotive, ceramics, cosmetics, pharmacology (CAC Particulate),   food, footwear, packaging and printing.Download the Datasheet below for more information or click 'VeriVide CAC Datasheet Here' to get in touch with colour experts. VeriVide CAC Datasheet Here Features of VeriVide Colour Assessment Cabinets • CAC 60, CAC 120 and CAC 150 accommodate 60, 120 and 150cm tubes respectively
  • Either 4 or 5 light sources available for each model including D65, D50, 840P15, F and UV - see Lamp Options.• Internal finishes in Munsell N5, Munsell N7 or Grey 5574 • Diffuser and/or dimmer options available​ Dimensions of VeriVide Colour Assessment Cabinets CAC 60-4 Dimensions (mm) Width Height Depth Overall 710 545 420
Viewing Area 680 360 380 CAC 60-5 Dimensions (mm) Width Height Depth Overall 710 545 540 Viewing Area 680 360 495 CAC 120-4 and CAC 120-5 Dimensions (mm) Width Height DepthOverall 1290 755 620 Viewing Area 1260 570 585 CAC 150-4 and CAC 150-5 Dimensions (mm) Width Height Depth Overall 1560 755 620 Viewing Area 1530 570 585 Lamp Options of VeriVide Colour Assessment Cabinets Features of VeriVide Colour Assessment Cabinets Lamp specifications: CIE Daylight Illuminants Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code D75 VeriVide D75 "Artificial Daylight" Correlated colour temperature 7500K. Conforming to the USA ASTM (American Society for Testing and Materials) D1729-82 standard for D75 Illuminant. With high CIE specifications, for accurate colour matching. 96 600mm 20w T12 600D75 D65 VeriVide D65 "Artificial Daylight" VeriVide D65 “Artificial Daylight”. Correlated colour temperature 6500K. Within the tolerances prescribed in BS 950: Part 1; and all international specifications for D65 illluminant. Specified for most applications where there is a need to maintain colour consistency and quality.Conforming highly to the CIE specifications, for accurate colour matching. 98 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 600D65 1200D65 1500D65 D50 D50 "Artificial   Daylight" Correlated colour temperature of 5000K. For the Graphic Technology and Photography industries. D50 lamps conform to BS 950: Part 2 and ISO 3664. Recommended for transmitted light source to view transparencies and for the reflected light source to view reproductions. 98 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 60095 120095 150095 CIE Illuminant 'A' Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code'F' Tungsten Filament Tungsten Filament Lighting. Approximate color temperature of 2800K. Required by BS 950: Part 1 as a test for metamerism (approximating CIE Illuminant ‘A’). Typical light source used within domestic environments. 100 Globe Globe Round Clear-   284mm Opal-284mm 40w60w 150w 60w 60w 45mm 45mm - 40G450 60G450 150FILO 28460CL28460OP'A' Tungsten Halogen Tungsten Halogen Lighting (CIE Illuminant ‘A’). This represents incandescent A (inc-A) with a colour temperature of 2856K. Typical light source used within domestic environments. Used to check for metamerism. 100 - 35w - HALO/12V /35WLP Alternative (fluorescent) lighting / Point of SaleLight Source Name Lamp Description C.R.I. Length Watts Diam Product Code840 P15 VeriVide 840P15 Narrow Band Triphosphor Fluorescent Lamps. Correlated colour tempera ture of 4000K. CIE Illuminant F11. Often chosen as a European “Point of Sale” light source, with good colour rendering and manufactured to a tighter tolerance specification as prescribed by Marks & Spencer. (Formerly TL84P15) 85 600mm 1200mm 1500mm 18w 36w 58w T8 T8T8 60084P15120084P15 150084P15CWF Cool White Cool White Broad Band Fluorescent Lamps. Correlated colour temperature of 4000K. Used as an American “Point of Sale” light source. Moderate colour rendering. 62 600mm 1200mm 1500mm 20w 40w 65/80w T12 T12 T12 60033 120033 150033U35 Ultralume 35 Ultralume Narrow Band Triphosphor Fluorescent Lamp.Correlated colour temperature 3500K. An American “Point of Sale” light source, with good colour rendering. 86 600mm 1200mm 17w 32w T8 T8 T8 600U35 1200U35 830 830 Narrow Band Triphosphor Fluorescent Lamp. Correlated colour temperature 3000K. Often chosen as a European “Point of Sale” light source with good colour rendering.(Formerly TL83) 85 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 60083 120083 150083 Horizon Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code 'H' Horizon Lighting Colour temperature 2300K. Used for Automotive, Apparel and Metamerism Testing. As specified by the ASTM (American Society for testing and Materials) D1729-74, Standard Practise for Visual Evaluation of Colour Differences of Opaque Materials. 98 - 75w - HALO/12V /75WUltraviolet Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code UV Ultraviolet Ultraviolet Blacklight. Used to detect the presence of Optical Brightening Agents and/or Fluorescent dyes. Therefore it is useful when assessing white and Fluorescent shades to check the level present and its evenness. N/A Clear-450mm Blacklight-600mm 15w 18w T8 T8 450UV15 600UV18 Paint specification of  VeriVide Colour Assessment Cabinets PAINT (For Cabinet Interiors) Name Description Quantity Product Code Crown Plain Grey 5574 Matt Emulsion 0.5 Litre Tins 5574 0.5L Munsell N5 0.5 Litre Tins N5 0.5L Munsell N7 0.5 Litre Tins N7 0.5L VERIVIDE MAINTENANCE PACK The VeriVide Maintenance Pack includes Cleaning Materials, Brush & Roller plus 0.5 litres of Paint.   https://maamtexbd.com/product/verivide-colour-assessment-cabinets/
Add to cart
Quick view
Color Matching Cabinet -light Box

Color Matching Cabinet-Light Box

, ,
$0.00

Color Matching Cabinet-Light Box

Color Matching Cabinet-Light Box x

Color Matching Cabinet-Light Box

Color Matching Cabinet -light Box A Color Matching Cabinet-Light box (also known as a Light Box) is a standardized visual assessment tool used to evaluate the color consistency of materials like fabric, paint, plastic, paper, and leather under different lighting conditions. Purpose of Color Matching Cabinet-Light Box : To detect color variations and metamerism (color changes under different lights). Ensures accurate color matching across production batches and materials.   How Color Matching Cabinet-Light Box Works: The cabinet is equipped with multiple standardized light sources (e.g., D65, TL84, UV, CWF, A). Samples are placed inside, and their colors are observed under each light to check for consistency.   Common Light Sources of Color Matching Cabinet-Light Box: D65 – Daylight (standard) TL84 – Store lighting (fluorescent) CWF – Cool white fluorescent UV – Ultraviolet (for fluorescent content) A – Incandescent (home light) U30/U35 – Warm white for showroom lighting     Applications of Color Matching Cabinet-Light Box: Textile and garment inspection Paint and coating industry Plastics and packaging Printing and graphic design   Benefits of Color Matching Cabinet-Light Box: Accurate Color Assessment - Ensures color consistency across products by simulating different lighting conditions. Detects Metamerism - Identifies if colors appear differently under various lights, preventing mismatches. Improves Quality Control - Enhances visual inspection processes in textiles, printing, and packaging.   Standardized Viewing Conditions - Provides consistent light sources for reliable and repeatable evaluations. Reduces Rework and Returns - Helps detect color defects early, saving time and production costs. Supports Industry Standards - Meets international color evaluation standards like ASTM D1729, ISO 3664.   Easy to Use of Color Matching Cabinet -Light Box  - Simple controls with clearly labeled light source buttons. Multiple Light Source Options   - Enables testing under conditions matching retail, daylight, home, and UV lighting. Features of Color Matching Cabinet-Light Box: Multiple Standard Light Sources   - Includes D65 (daylight), TL84 (store light), CWF, UV, A (home light), and optional U30/U35. Digital Hour Meter   - Tracks usage time for each light source to schedule timely replacements. Uniform Light Distribution   - Diffused lighting ensures consistent and shadow-free viewing.   Push Button Control Panel- Easy switching between different light sources. No Warm-Up Time - Instant-on lighting allows immediate use. Sturdy Metal Body - Durable and well-coated to reduce light reflection and distortion. Viewing Area Markings - Guides for proper sample placement and comparison. Optional Dimming Function - Adjustable light intensity (in advanced models) for fine-tuned observation.   Standardized Viewing Angles  - Ensures observer views samples under consistent angles for accurate color judgment.   Description of Color Matching Cabinet-Light Box Color Matching TILO 2 Feet 5/6 Option Light Box Cabinet (P60-5/6) TILO 2 Feet 5/6 Option Light Box Cabinet (P60-5/6) is equipped with 5 light sources. The consistency of the light sources in all Tilo Color Assessment Cabinets gives excellent viewing conditions for reliable color critical decisions under consistent lighting. TILO 2 Feet 5 Option Light Box Cabinet (P60-5) can be applied to the industries that need to perform color difference testing as follows: as the premiere designer and manufacturer of color matching instrument products for the Graphic arts, Photographic, Textile, Dyeing, Packaging, Printing, Leather, Inks, Knitwear, Plastic, Automotive and Ceramics industries. TILO 2 Feet 5 Option Light Box Cabinet (P60-5) offers an exact and dependable way to survey colors beneath different lighting conditions. This apparatus is planned to offer assistance experts in the material, paint, and plastic businesses to coordinate and assess colors with exactness. This high-quality item in Bangladesh at the best cost. The color Cabinet box permits for an ideal seeing environment for color inspection. Features of TILO 2 Feet 5 Option Light Box Cabinet (P60-5) Multiple Light Sources of Color Matching Cabinet-Light Box The lTILO 2 Feet 5 Option Light Box Cabinet (P60-5) incorporates a assortment of light sources. These sources can reenact common sunshine, tungsten, and other counterfeit lighting conditions. By changing light sources, clients can compare colors in diverse situations, guaranteeing precise results. Adjustable Light Intensity of Color Matching Cabinet-Light Box The color coordinating light box highlights flexible light concentrated. You can control the brightness to coordinate distinctive real-world conditions. It guarantees a more point by point investigation of how colors alter beneath different lighting intensities. Compact and Solid Design This color appraisal cabinet comes in a compact plan, making it simple to put in any workspace. Its strong structure guarantees long-term utilize, indeed in requesting environments. Precise Color Evaluation The light box gives a controlled environment that makes a difference clients assess colors in a steady way. This highlight is particularly valuable in businesses where correct color coordinating is basic, such as in materials or paints. Energy Efficient The color cabinet is outlined to be energy-efficient. It employments Driven lights that devour less control whereas still advertising dependable and precise color assessment. Simple Client Interface The user-friendly interface of the color coordinating cabinet makes it simple for anybody to work. The controls are straightforward, and clients can alter settings effortlessly. Portable Design The color coordinating light box is lightweight, making it simple to move from one area to another. This movability is particularly valuable when you require to take the cabinet to diverse parts of the generation floor or to different client locations. Ideal for Different Industries Whether you work in materials, car, or fabricating, the color appraisal cabinet offers the exactness and unwavering quality required for color coordinating. It ensures consistency over distinctive materials and generation lines. FEATURES Certified by ASTM D1729, ISO3664, DIN, ANSI and BSI. Automatic changeable into another light source by switching. Usage time display, name of lamp, total number of switches for each. Violated time sensor for tracking lamp service or replacement. Large display & individual switch, easy to operate each light source. No warm-up time, just plug and play. The energy-saving device which generates lower heat & high efficiency. The name of the light source can be changed. SPECIFICATION OF TILO 2 FEET 5 OPTION LIGHT_BOX CABINET (P60-5) Name Details Model P60(5) Brand TILO Origin Hong Kong Dimensions (WxDxH) (710 x 405 x 570)mm Standards ASTM D1729, ISO3664, DIN, ANSI and BSI Light source Five light source. Power Source Electric. Voltage 220 ~ 240V Body Material Fiber-reinforce Warranty One year free service LIGHT SOURCE OF TILO 2 FEET 5 OPTION LIGHT_BOX CABINET (P60-5) Light Source Color viewing applications / Uses of Light Color Temp. (K) Power (W) Brand Info Quantity D65 International standard Artificial Daylight / Natural Daylight 6500 18 PHILIPS; TL-D/18-965 2 Pieces TL84 Applied to stores in Europe, Japan and China 4000 18 PHILIPS; TL-D/18-840 2 Pieces F “Sun-setting Light Yellow” incandescent light source 2700 40 PHILIPS 4 Pieces UV ultraviolet light to detect and evaluate optical brighteners or fluorescent pigments Wave length: 365nm 20 PHILIPS 18W BLB 1 Pieces CWF (Cool White Fluorescent) American Standard 4150 18 PHILIPS; TL-D/18-640 2 Pieces      
Add to cart
Quick view
Counting Balance-Weighing Scale
Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

, ,
$0.00

Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

  A Counting Balance-Weighing Scale (or Counting Weighing Scale) is a precision electronic scale designed to weigh items and simultaneously count them based on individual piece weight. It’s commonly used in industries for inventory management, packaging, and quality control.   Purpose of Counting Balance-Weighing Scale: To quickly and accurately count small items like buttons, beads, screws, or pills by weight. Eliminates manual counting, especially for large quantities.   Working Principle of Counting Balance-Weighing Scale: Weigh a sample quantity of items to determine the average weight of one piece. Place a bulk quantity on the scale. The scale divides the total weight by the unit weight to calculate the total item count.     Applications of Counting Balance-Weighing Scale: Textile accessories (buttons, rivets) Hardware (nuts, bolts, washers) Electronics (resistors, chips) Pharmaceuticals (tablets, capsules) Benefits of Counting Balance-Weighing Scale:   Fast and Accurate Counting - Saves time by quickly counting large quantities of small items. Reduces Human Error- Eliminates mistakes common in manual counting. Improves Productivity - Speeds up packing, inventory, and quality control processes. Versatile Use - Suitable for various industries: textiles, hardware, pharmaceuticals, electronics.   Cost-Efficient- Reduces labor costs and improves operational efficiency. Compact and Portable - Easy to move and use in different workstations. Dual Functionality - Can be used for both counting and standard weighing. Memory and Tare Functions - Stores unit weights and allows container weight deduction.   Features of Counting Balance-Weighing Scale: High Precision Sensors- Ensures accurate weight and count, even for tiny components. Digital Display- Separate displays for total weight, unit weight, and piece count. Tare Function - Allows deduction of container weight for net measurements. Memory Function - Stores frequently used unit weights for fast recall.   Multiple Units Support- Measures in grams, kilograms, pounds, etc. Sample Size Selection- Users can set sample sizes (e.g., 10, 20, 50 pcs) to calculate piece weight. Overload Protection- Prevents damage from excessive weight. Auto Calibration - Maintains long-term accuracy with internal or external calibration options. Sturdy Platform- Stainless steel pan with anti-slip design for stable weighing. Battery and AC Operation- Can run on rechargeable batteries or power adapter.   How to Use Counting Balance-Weighing Scale: Turn On the Scale - Power it on and wait for the display to stabilize at zero. Tare the Container - Place an empty container on the pan and press the "TARE" button to zero out its weight. Set Sample Size - Place a known quantity (e.g., 10 or 20 pcs) of identical items on the scale. - Enter the sample quantity using the keypad. Confirm Unit Weight - The scale calculates and stores the average unit weight automatically. Add Bulk Items - Add the rest of the items into the container. - The display will show the total count based on the stored unit weight. Record Results   - Note down the total piece count and remove the items. Turn Off After Use - Power off the scale to save battery or electricity.     Counting Balance /Weighing Scale Model : DS610C Brand : DIGISCALE Origin : Germany Capacity : 3 kg Division : 0.1g Min Weight : 0.5g Grade : Class 3 Platter : 280 × 215mm Battery : Rechargeable Battery with AC Adaptor Display : Double Large LCD Display Warranty : One Year Service Warranty SPECIFICATION Build With 5 Measuring Units: kg, g, lb, oz, PCS Count Platter : 280 × 215mm Quality : Heavy Duty Premium Quality Product Net / Gross Weight : 3080g / 3130g Battery : Rechargeable Battery with AC Adaptor Battery Capacity: 6V 4.5Ah / 20 HR Adaptor Power Input : AC 220V-240V / 50Hz Adaptor Power Output : 10V DC/ 500mA Display : Double Large LCD Display Color : White-Gray Keyboard : 20 Members Key Operating Temperature : 0-40°C (32-104°F) FEATURES Auto Zero Tracking Automatic Overload Display Grade Class 3 Auto Backlight Double LCD Display Low Battery Indication Rechargeable Battery with Adaptor Save Electricity Advantage Piece Counting Functionality: The DS603C Counting Weighing Scale is prepared with an precise piece checking highlight, perfect for stock administration, generation lines, and quality control assignments. This guarantees you can tally things like screws, jolts, or other little components efficiently. High-Precision Digital Scale Display: The advanced scale show gives clear and precise readings, making it simple to screen weight and amount. Its shinning and natural interface guarantees ease of use in diverse lighting conditions. Digital Scale Calibration: To keep up exactness, the DS610C weighing scale calibration prepare is direct, guaranteeing the scale remains dependable over time. Normal weight scale calibration ensures reliable execution, indeed with overwhelming use. Durable and Reliable Build: The DS610C advanced weight scale is created with strong materials to withstand visit utilize in requesting situations, such as stockrooms and fabricating facilities. Versatility: As a weighing and tallying scale, it combines the benefits of weight estimation and piece tallying in one gadget. This makes it appropriate for a wide extend of applications, from retail to mechanical uses. Categories: Digital Scale and Balance, Piece Counting Scale, Table Top Scale
Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

 
Add to cart
Quick view
Tensile testing machine

MOST POPULAR

High Speed Hard Winding Machine
Automatic Bobbin Hydro extractor
Automatic Bobbin Hydro extractor
Add to cart
Quick view

Automatic Bobbin Hydro extractor

$0.00
Digital hot plate-magnetic stirrer
Color Matching Cabinet -light Box
Add to cart
Quick view

Digital hot plate-magnetic stirrer

,
$0.00
Physical Testing & Fabric Testing
Digital Temperature Humidity Meter

Digital Temperature Humidity Meter

,
$0.00
Digital Temperature Humidity Meter

Digital Temperature Humidity Meter

  A Digital Temperature Humidity Meter, also known as a digital hygrometer, is an electronic device used to measure and display the relative humidity (RH) of the air, often along with temperature. It's commonly used in laboratories, industrial settings, storage areas, and homes to monitor moisture levels.   Key Features of Digital Temperature Humidity Meter: - Digital Display: Shows humidity (in % RH) and often temperature (in °C/°F). - Sensor-Based Measurement: Uses capacitive or resistive sensors for accurate readings. - Compact & Portable: Available in handheld or wall-mountable forms. - Data Logging (in some models): Records humidity levels over time for analysis. - Min/Max Readings: Displays historical high and low humidity values.   Common Applications of Digital Temperature Humidity Meter: - Laboratories: Maintaining stable humidity for experiments or sample storage. - Warehouses: Monitoring conditions for sensitive goods (e.g., electronics, paper, pharmaceuticals). - HVAC Systems: Ensuring proper climate control. - Homes: Preventing mold growth or overly dry conditions.   Benefits of Digital Temperature Humidity Meter: - Accurate and quick readings - Easy to use and read - Helps in maintaining comfort, safety, and product integrity Would you like recommendations for models or guidance on calibration? Benefits of Digital Humidity meter Here are the key benefits of using a Digital Humidity Meter:   ✅ 1. Accurate Humidity Monitoring - Provides precise relative humidity (%RH) readings, essential for sensitive environments. ✅ 2. Fast and Real-Time Results - Displays immediate data, allowing for quick adjustments to environmental conditions. ✅ 3. Dual Measurement - Many models also measure temperature, offering a more complete picture of ambient conditions.   ✅ 4. Easy to Use - Simple digital interface with clear display, suitable for both professionals and non-technical users. ✅ 5. Compact and Portable - Lightweight design makes it ideal for field use, indoor monitoring, or mounting on walls. ✅ 6. Prevents Damage - Helps avoid moisture-related issues like mold, corrosion, static buildup, and product degradation.   ✅ 7. Supports Quality Control - Essential for labs, warehouses, and manufacturing environments to maintain product integrity. ✅ 8. Data Logging (Optional) How to use Digital Humidity meter Here are the key features of a Digital Humidity Meter: 1. Digital Display - Shows real-time humidity (%) and often temperature (°C/°F). - Some include backlit screens for easy viewing.   2. High Accuracy Sensors - Uses capacitive or resistive sensors for accurate and stable humidity readings. 3. Min/Max & Hold Functions - Displays minimum, maximum, and current readings. - "Hold" function freezes the current reading for review.   4. Data Logging (in advanced models) - Records humidity data over time for monitoring trends. 5. Portable or Wall-Mountable - Available as handheld, desktop, or wall-mounted units for different environments.   6. Battery or USB Powered - Operates on standard batteries or via USB power for flexibility. 7. Optional External Probes - Some models support external humidity/temperature sensors for remote monitoring. 8. Calibration Option - Allows manual or automatic calibration to maintain accuracy.   Here’s a quick step-by-step guide on how to use a Digital Temperature Humidity Meter: ✅ 1. Power On the Device - Insert batteries (if portable) or plug it in (if wall-mounted). - Press the power button to turn it on. ✅ 2. Place It Properly - Set the meter in an open, well-ventilated area. - Avoid placing near windows, vents, or direct heat sources for accurate readings.   ✅ 3. Wait for Stabilization - Allow the device a few seconds to stabilize and show accurate humidity and temperature readings. ✅ 4. Read the Display - Humidity will be shown as % RH (Relative Humidity). - Most models also display temperature in °C or °F.   ✅ 5. Use Additional Features (if available) - Press buttons to view Min/Max, Data Log, or switch units. - Some advanced models may have Bluetooth or USB for data transfer. ✅ 6. Maintain the Device - Clean sensor area gently if dusty. - Calibrate periodically if required (check manual).  
Add to cart
Quick view
Fatigue tester for Elastic fabric

Fatigue tester for Elastic fabric

,
$0.00

Fatigue Tester for Elastic Fabric

Fatigue tester for Elastic fabric

Fatigue tester for Elastic fabric

  A Fatigue Tester for Elastic Fabric is a specialized instrument designed to evaluate the durability and performance of elastic materials, such as elastic bands, tapes, and fabrics, under repeated stretching and relaxation cycles. This testing is crucial for applications where elastic materials are subjected to continuous or repetitive stress, ensuring they maintain their functionality over time.   Purpose Fatigue Tester for Elastic Fabric The primary objective of this tester is to simulate the conditions that elastic fabrics endure during actual use. By repeatedly stretching and relaxing the material, the tester assesses:   - Elastic Recovery: The ability of the material to return to its original length after stretching. - Fatigue Resistance: How well the material withstands repeated cycles without significant degradation. - Durability: The lifespan of the elastic properties under continuous use.   Working Principle of Fatigue Tester for Elastic Fabric The tester operates by clamping a specimen of the elastic fabric and subjecting it to cyclic stretching and relaxation.   Key operational features include: Cycle Count: The number of stretching and relaxation cycles is set according to testing requirements. - Speed Regulation: The rate of stretching can be adjusted to simulate different usage conditions. - Monitoring: The tester records data such as the number of cycles completed and any changes in the fabric's properties.   For instance, the Elastic Band Fatigue Tester ADL-FT01 features a high-speed linear slide, servo motor, and touch screen control software, allowing precise control over stretching parameters   Key Specifications of Fatigue Tester for Elastic Fabric While specifications may vary among different models, common parameters include: - Stretch Percentage: Adjustable from 0% to 100%. - Stretching Speed: Up to 40 cycles per minute. - Sample Length Range: Maximum of 260mm. - Cycle Count Capacity: Up to 9,999,999 cycles. - Control Interface: Typically a 7-inch color touch screen. - Power Supply: AC220V 50Hz/60Hz. These features enable comprehensive testing of elastic materials under various conditions.   Benefits of Fatigue Tester for Elastic Fabric - Quality Assurance: Ensures that elastic materials meet required durability standards. - Product Development: Aids in the design of materials with improved fatigue resistance. Cost Efficiency: Identifies potential material failures early, reducing product returns and warranty claims. - Compliance: Helps manufacturers adhere to industry standards such as GB/T 37635.   Applications of Fatigue Tester for Elastic Fabric Fatigue testers for elastic fabrics are widely used in: - Textile Manufacturing: Testing elastic components in garments, such as waistbands and cuffs. - Medical Textiles: Evaluating the durability of elastic materials used in bandages and supports. - Automotive Industry: Assessing elastic components in car interiors. - Research and Development: Developing new elastic materials with enhanced properties.   Features of Fatigue Tester for Elastic Fabric:
  1. Adjustable Stretch Range - Allows setting stretch levels (e.g., 0–100%) to simulate real-life fabric use.
  2. High-Cycle Capability - Supports up to millions of stretch-relax cycles for long-term fatigue analysis.
  3. Touch Screen Control - 7-inch color display for easy setup, monitoring, and data entry.
  4. Servo Motor Driven - Ensures precise and smooth linear motion during testing.
 
  1. Customizable Speed - Adjustable test speed (e.g., up to 40 cycles per minute) based on test requirements.
  2. Multi-Sample Testing - Some models allow testing multiple specimens simultaneously.
  3. Cycle Counter with Alarm - Built-in counter with programmable stop after preset cycles and auto-alert feature.
 
  1. Durable Construction - Robust metal frame suitable for continuous testing in lab environments.
  2. Standard Compliance - Designed to follow standards like GB/T 37635 for elastic fabric testing.
  How to Use Fatigue Tester for Elastic Fabric:
  1. Prepare the Sample
- Cut the elastic fabric to the specified size (e.g., 260 mm max length). - Mark the gauge length if needed for measurement after testing.
  1. Mount the Sample - Secure both ends of the fabric in the upper and lower clamps.
  2. Set Test Parameters
- Enter the desired stretch percentage (e.g., 50%). - Set the number of cycles and speed (e.g., 30 cycles/min). - Adjust dwell time if required (time fabric stays stretched).  
  1. Start the Test - Press start on the touch screen interface. - The machine will cyclically stretch and release the sample.
  2. Monitor Progress - Observe operation or let it run automatically.
- Machine stops automatically after reaching the set cycles.
  1. Remove and inspect - Take out the fabric and measure elongation, recovery, or visual defects.
  2. Record and Compare Results - Compare with initial measurements or standard performance criteria.
    Fatigue tester for Elastic fabric

    Fatigue tester for Elastic fabric

   
Add to cart
Quick view
Stretch Recovery Tester (Static Method)

Stretch Recovery Tester Static Method

,
$0.00

Stretch Recovery Tester Static Method 

Stretch Recovery Tester (Static Method)

Stretch Recovery Tester

  A Stretch Recovery Tester Static Method is a lab instrument used to evaluate the stretch ability and recovery properties of fabrics, elastomers, or other stretchable materials. This method is crucial in textiles and material science to assess how well a material returns to its original shape after being stretched. Key Functions of Stretch Recovery Tester Static Method : - Measures elongation under a fixed force or length. - Assesses the recovery percentage after a specified recovery time once the force is removed. - Evaluates fabric's resilience, durability, and comfort properties. How It Works Stretch Recovery Tester  Static Method:
  1. A sample is stretched to a predetermined extension or force.
  2. The stretch is maintained for a set period.
  3. After removing the load, the recovery (return to original length) is measured after a fixed time.
  4. The fabric sample is clamped and stretched to a specific length or force.
  5. It’s held for a fixed duration (e.g., 1–5 minutes).
  6. The tension is released, and the sample is allowed to recover.
  7. The recovered length is measured after a set time.
Main Components: - Fixed clamps to hold the sample. - Movable clamps for stretching. - Precision scale or ruler for measuring elongation and recovery. - Timing device (manual or digital) to control stretching and recovery periods. - To assess elastic recovery and dimensional stability after stretching. Applications: - Used in testing knitwear, sportswear, elastic fabrics, and compression garments. - Helps in product development and quality assurance. Stretch Recovery Tester Static Method is designed to determine the stretch recovery property of elastic material by static method. 2.0mm thickness stainless steel frame and base board, makes the tester firm and stable. Sample holder can be slid along the guide rail smoothly and can be fixed at any position of the rail. Test Scope：elastomeric material Testing Standards：ASTM D2594、ASTM D3107, etc. key features of a Stretch Recovery Tester Static Method: Adjustable clamps and measurement scale. - Timer for accurate stretch/recovery periods. - Simple mechanical design for ease of use. ✅ 1. Manual or Semi-Automatic Operation - Allows controlled stretching and recovery measurements. - Simple setup for routine quality control. ✅ 2. Adjustable Clamp System - Securely holds samples of various sizes and thicknesses. - Ensures consistent test conditions. ✅ 3. Precision Measurement Scale - Provides accurate readings of elongation and recovery length. - Often graduated in millimeters or inches. ✅ 4. Sturdy Frame - Made of corrosion-resistant metal or coated steel. - Ensures durability and stability during testing. ✅ 5. Time Control Support - Timer to monitor stretch and recovery durations. - Helps standardize test procedures. ✅ 6. Compact Design - Space-saving for lab environments. - Easy to move and operate. ✅ 7. Compliance with Standards - Often designed to meet standards like ASTM D3107 or BS 4294. Would you like a comparison with the dynamic method or specifications for a particular model? key benefits of using a Stretch Recovery Tester Static Method: ✅ 1. Accurate Fabric Performance Analysis- Provides reliable data on stretch and recovery, critical for assessing elasticity and fit. ✅ 2. Easy to Operate- Simple, manual setup makes it ideal for routine testing and quality control. ✅ 3. Cost-Effective- More affordable than dynamic testers, making it suitable for smaller labs or production units. ✅ 4. Standardized Testing- Supports industry-standard methods (e.g., ASTM D3107), ensuring consistency across tests. ✅ 5. Versatile Applications- Suitable for testing knit fabrics, elastic bands, spandex materials, and other stretchable textiles. ✅ 6. Durable and Low Maintenance- Mechanically straightforward with minimal upkeep required. ✅ 7. Enhances Product Development- Helps designers and manufacturers optimize materials for comfort, performance, and durability. Applications: - Textile R&D - Production quality control
Stretch Recovery Tester (Static Method)

Stretch Recovery Tester

- Evaluating materials for comfort, durability, and fit Stretch Recovery Tester Diller In Bangladesh, Stretch Recovery Tester Importer In Bangladesh, Stretch Recovery Tester in Bangladesh, Stretch Recovery Tester in Bd, Stretch Recovery Tester In Uttara, Stretch Recovery Tester Price in Bangladesh, Stretch Recovery Tester Supplier in Bangladesh  
Add to cart
Quick view
VeriVide Colour Assessment Cabinets
Color Matching Cabinet -light Box

VeriVide Colour Assessment Cabinets

, ,
$0.00

VeriVide Colour Assessment Cabinets

VeriVide Colour Assessment Cabinets VeriVide offers high-quality Colour Assessment Cabinets (CACs) such as the CAC 60-4, CAC 60-5, and CAC 120-4&5. These cabinets, originating from the UK, are reliable tools for visual evaluation in quality assurance, meeting national, international, and retailer standards. They effectively mitigate issues related to color assessment.VeriVide Colour Assessment Cabinets High-quality visual evaluation tool for quality assurance. Adhering to national, international and retailer standards.Colour Assessment Cabinet's (CACs) reduce problems associated with assessing products or samples in different environments,be though geological or seasonal, offering a cost-effective method to ensure visual accuracy and product quality. Color Light Box Enhance color precision with VeriVide's cutting-edge Colour Assessment Cabinets. These cabinets are meticulously designed to ensure accurate color evaluation in various industries. Invest in VeriVide Colour Assessment Cabinets to elevate your color assessment process.  Enhance Color Precision with VeriVide's Cutting-Edge Assessment Cabinets, which meet or surpass ISO 3664 and BS 950 Part 1 international standards. The cabinets are adaptable to user requirements, with lamp options to choose different light sources. Available in 60, 120, and 150cm widths, VeriVide Colour Assessment Cabinets provide a flexible solution for accurate color assessment. Incorporate user-friendly features like servicing indicator, auto sequence, warm-up, power save and data storage.4 or 5 light source options Versions available for colour fastness testing and particulate testing both adhering to global standardsEnsure  that you are using the best equipment available as they provide the best fluorescent D65 daylight simulator, with the highest Colour   Rendering Index (CRI), available. VeriVide Colour Assessment Cabinets products are known as light boxes, viewing booths, colour cabinets and others, depending on which industry or country they are serving in. They are used within a wide array of industry sectors throughout the world including textile and apparel, graphics, automotive, ceramics, cosmetics, pharmacology (CAC Particulate),   food, footwear, packaging and printing.Download the Datasheet below for more information or click 'VeriVide CAC Datasheet Here' to get in touch with colour experts. VeriVide CAC Datasheet Here Features of VeriVide Colour Assessment Cabinets • CAC 60, CAC 120 and CAC 150 accommodate 60, 120 and 150cm tubes respectively
  • Either 4 or 5 light sources available for each model including D65, D50, 840P15, F and UV - see Lamp Options.• Internal finishes in Munsell N5, Munsell N7 or Grey 5574 • Diffuser and/or dimmer options available​ Dimensions of VeriVide Colour Assessment Cabinets CAC 60-4 Dimensions (mm) Width Height Depth Overall 710 545 420
Viewing Area 680 360 380 CAC 60-5 Dimensions (mm) Width Height Depth Overall 710 545 540 Viewing Area 680 360 495 CAC 120-4 and CAC 120-5 Dimensions (mm) Width Height DepthOverall 1290 755 620 Viewing Area 1260 570 585 CAC 150-4 and CAC 150-5 Dimensions (mm) Width Height Depth Overall 1560 755 620 Viewing Area 1530 570 585 Lamp Options of VeriVide Colour Assessment Cabinets Features of VeriVide Colour Assessment Cabinets Lamp specifications: CIE Daylight Illuminants Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code D75 VeriVide D75 "Artificial Daylight" Correlated colour temperature 7500K. Conforming to the USA ASTM (American Society for Testing and Materials) D1729-82 standard for D75 Illuminant. With high CIE specifications, for accurate colour matching. 96 600mm 20w T12 600D75 D65 VeriVide D65 "Artificial Daylight" VeriVide D65 “Artificial Daylight”. Correlated colour temperature 6500K. Within the tolerances prescribed in BS 950: Part 1; and all international specifications for D65 illluminant. Specified for most applications where there is a need to maintain colour consistency and quality.Conforming highly to the CIE specifications, for accurate colour matching. 98 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 600D65 1200D65 1500D65 D50 D50 "Artificial   Daylight" Correlated colour temperature of 5000K. For the Graphic Technology and Photography industries. D50 lamps conform to BS 950: Part 2 and ISO 3664. Recommended for transmitted light source to view transparencies and for the reflected light source to view reproductions. 98 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 60095 120095 150095 CIE Illuminant 'A' Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code'F' Tungsten Filament Tungsten Filament Lighting. Approximate color temperature of 2800K. Required by BS 950: Part 1 as a test for metamerism (approximating CIE Illuminant ‘A’). Typical light source used within domestic environments. 100 Globe Globe Round Clear-   284mm Opal-284mm 40w60w 150w 60w 60w 45mm 45mm - 40G450 60G450 150FILO 28460CL28460OP'A' Tungsten Halogen Tungsten Halogen Lighting (CIE Illuminant ‘A’). This represents incandescent A (inc-A) with a colour temperature of 2856K. Typical light source used within domestic environments. Used to check for metamerism. 100 - 35w - HALO/12V /35WLP Alternative (fluorescent) lighting / Point of SaleLight Source Name Lamp Description C.R.I. Length Watts Diam Product Code840 P15 VeriVide 840P15 Narrow Band Triphosphor Fluorescent Lamps. Correlated colour tempera ture of 4000K. CIE Illuminant F11. Often chosen as a European “Point of Sale” light source, with good colour rendering and manufactured to a tighter tolerance specification as prescribed by Marks & Spencer. (Formerly TL84P15) 85 600mm 1200mm 1500mm 18w 36w 58w T8 T8T8 60084P15120084P15 150084P15CWF Cool White Cool White Broad Band Fluorescent Lamps. Correlated colour temperature of 4000K. Used as an American “Point of Sale” light source. Moderate colour rendering. 62 600mm 1200mm 1500mm 20w 40w 65/80w T12 T12 T12 60033 120033 150033U35 Ultralume 35 Ultralume Narrow Band Triphosphor Fluorescent Lamp.Correlated colour temperature 3500K. An American “Point of Sale” light source, with good colour rendering. 86 600mm 1200mm 17w 32w T8 T8 T8 600U35 1200U35 830 830 Narrow Band Triphosphor Fluorescent Lamp. Correlated colour temperature 3000K. Often chosen as a European “Point of Sale” light source with good colour rendering.(Formerly TL83) 85 600mm 1200mm 1500mm 18w 36w 58w T8 T8 T8 60083 120083 150083 Horizon Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code 'H' Horizon Lighting Colour temperature 2300K. Used for Automotive, Apparel and Metamerism Testing. As specified by the ASTM (American Society for testing and Materials) D1729-74, Standard Practise for Visual Evaluation of Colour Differences of Opaque Materials. 98 - 75w - HALO/12V /75WUltraviolet Light Source Name Lamp Description C.R.I. Length Watts Diam Product Code UV Ultraviolet Ultraviolet Blacklight. Used to detect the presence of Optical Brightening Agents and/or Fluorescent dyes. Therefore it is useful when assessing white and Fluorescent shades to check the level present and its evenness. N/A Clear-450mm Blacklight-600mm 15w 18w T8 T8 450UV15 600UV18 Paint specification of  VeriVide Colour Assessment Cabinets PAINT (For Cabinet Interiors) Name Description Quantity Product Code Crown Plain Grey 5574 Matt Emulsion 0.5 Litre Tins 5574 0.5L Munsell N5 0.5 Litre Tins N5 0.5L Munsell N7 0.5 Litre Tins N7 0.5L VERIVIDE MAINTENANCE PACK The VeriVide Maintenance Pack includes Cleaning Materials, Brush & Roller plus 0.5 litres of Paint.   https://maamtexbd.com/product/verivide-colour-assessment-cabinets/
Add to cart
Quick view
Color Matching Cabinet -light Box

Color Matching Cabinet-Light Box

, ,
$0.00

Color Matching Cabinet-Light Box

Color Matching Cabinet-Light Box x

Color Matching Cabinet-Light Box

Color Matching Cabinet -light Box A Color Matching Cabinet-Light box (also known as a Light Box) is a standardized visual assessment tool used to evaluate the color consistency of materials like fabric, paint, plastic, paper, and leather under different lighting conditions. Purpose of Color Matching Cabinet-Light Box : To detect color variations and metamerism (color changes under different lights). Ensures accurate color matching across production batches and materials.   How Color Matching Cabinet-Light Box Works: The cabinet is equipped with multiple standardized light sources (e.g., D65, TL84, UV, CWF, A). Samples are placed inside, and their colors are observed under each light to check for consistency.   Common Light Sources of Color Matching Cabinet-Light Box: D65 – Daylight (standard) TL84 – Store lighting (fluorescent) CWF – Cool white fluorescent UV – Ultraviolet (for fluorescent content) A – Incandescent (home light) U30/U35 – Warm white for showroom lighting     Applications of Color Matching Cabinet-Light Box: Textile and garment inspection Paint and coating industry Plastics and packaging Printing and graphic design   Benefits of Color Matching Cabinet-Light Box: Accurate Color Assessment - Ensures color consistency across products by simulating different lighting conditions. Detects Metamerism - Identifies if colors appear differently under various lights, preventing mismatches. Improves Quality Control - Enhances visual inspection processes in textiles, printing, and packaging.   Standardized Viewing Conditions - Provides consistent light sources for reliable and repeatable evaluations. Reduces Rework and Returns - Helps detect color defects early, saving time and production costs. Supports Industry Standards - Meets international color evaluation standards like ASTM D1729, ISO 3664.   Easy to Use of Color Matching Cabinet -Light Box  - Simple controls with clearly labeled light source buttons. Multiple Light Source Options   - Enables testing under conditions matching retail, daylight, home, and UV lighting. Features of Color Matching Cabinet-Light Box: Multiple Standard Light Sources   - Includes D65 (daylight), TL84 (store light), CWF, UV, A (home light), and optional U30/U35. Digital Hour Meter   - Tracks usage time for each light source to schedule timely replacements. Uniform Light Distribution   - Diffused lighting ensures consistent and shadow-free viewing.   Push Button Control Panel- Easy switching between different light sources. No Warm-Up Time - Instant-on lighting allows immediate use. Sturdy Metal Body - Durable and well-coated to reduce light reflection and distortion. Viewing Area Markings - Guides for proper sample placement and comparison. Optional Dimming Function - Adjustable light intensity (in advanced models) for fine-tuned observation.   Standardized Viewing Angles  - Ensures observer views samples under consistent angles for accurate color judgment.   Description of Color Matching Cabinet-Light Box Color Matching TILO 2 Feet 5/6 Option Light Box Cabinet (P60-5/6) TILO 2 Feet 5/6 Option Light Box Cabinet (P60-5/6) is equipped with 5 light sources. The consistency of the light sources in all Tilo Color Assessment Cabinets gives excellent viewing conditions for reliable color critical decisions under consistent lighting. TILO 2 Feet 5 Option Light Box Cabinet (P60-5) can be applied to the industries that need to perform color difference testing as follows: as the premiere designer and manufacturer of color matching instrument products for the Graphic arts, Photographic, Textile, Dyeing, Packaging, Printing, Leather, Inks, Knitwear, Plastic, Automotive and Ceramics industries. TILO 2 Feet 5 Option Light Box Cabinet (P60-5) offers an exact and dependable way to survey colors beneath different lighting conditions. This apparatus is planned to offer assistance experts in the material, paint, and plastic businesses to coordinate and assess colors with exactness. This high-quality item in Bangladesh at the best cost. The color Cabinet box permits for an ideal seeing environment for color inspection. Features of TILO 2 Feet 5 Option Light Box Cabinet (P60-5) Multiple Light Sources of Color Matching Cabinet-Light Box The lTILO 2 Feet 5 Option Light Box Cabinet (P60-5) incorporates a assortment of light sources. These sources can reenact common sunshine, tungsten, and other counterfeit lighting conditions. By changing light sources, clients can compare colors in diverse situations, guaranteeing precise results. Adjustable Light Intensity of Color Matching Cabinet-Light Box The color coordinating light box highlights flexible light concentrated. You can control the brightness to coordinate distinctive real-world conditions. It guarantees a more point by point investigation of how colors alter beneath different lighting intensities. Compact and Solid Design This color appraisal cabinet comes in a compact plan, making it simple to put in any workspace. Its strong structure guarantees long-term utilize, indeed in requesting environments. Precise Color Evaluation The light box gives a controlled environment that makes a difference clients assess colors in a steady way. This highlight is particularly valuable in businesses where correct color coordinating is basic, such as in materials or paints. Energy Efficient The color cabinet is outlined to be energy-efficient. It employments Driven lights that devour less control whereas still advertising dependable and precise color assessment. Simple Client Interface The user-friendly interface of the color coordinating cabinet makes it simple for anybody to work. The controls are straightforward, and clients can alter settings effortlessly. Portable Design The color coordinating light box is lightweight, making it simple to move from one area to another. This movability is particularly valuable when you require to take the cabinet to diverse parts of the generation floor or to different client locations. Ideal for Different Industries Whether you work in materials, car, or fabricating, the color appraisal cabinet offers the exactness and unwavering quality required for color coordinating. It ensures consistency over distinctive materials and generation lines. FEATURES Certified by ASTM D1729, ISO3664, DIN, ANSI and BSI. Automatic changeable into another light source by switching. Usage time display, name of lamp, total number of switches for each. Violated time sensor for tracking lamp service or replacement. Large display & individual switch, easy to operate each light source. No warm-up time, just plug and play. The energy-saving device which generates lower heat & high efficiency. The name of the light source can be changed. SPECIFICATION OF TILO 2 FEET 5 OPTION LIGHT_BOX CABINET (P60-5) Name Details Model P60(5) Brand TILO Origin Hong Kong Dimensions (WxDxH) (710 x 405 x 570)mm Standards ASTM D1729, ISO3664, DIN, ANSI and BSI Light source Five light source. Power Source Electric. Voltage 220 ~ 240V Body Material Fiber-reinforce Warranty One year free service LIGHT SOURCE OF TILO 2 FEET 5 OPTION LIGHT_BOX CABINET (P60-5) Light Source Color viewing applications / Uses of Light Color Temp. (K) Power (W) Brand Info Quantity D65 International standard Artificial Daylight / Natural Daylight 6500 18 PHILIPS; TL-D/18-965 2 Pieces TL84 Applied to stores in Europe, Japan and China 4000 18 PHILIPS; TL-D/18-840 2 Pieces F “Sun-setting Light Yellow” incandescent light source 2700 40 PHILIPS 4 Pieces UV ultraviolet light to detect and evaluate optical brighteners or fluorescent pigments Wave length: 365nm 20 PHILIPS 18W BLB 1 Pieces CWF (Cool White Fluorescent) American Standard 4150 18 PHILIPS; TL-D/18-640 2 Pieces      
Add to cart
Quick view
Counting Balance-Weighing Scale
Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

, ,
$0.00

Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

  A Counting Balance-Weighing Scale (or Counting Weighing Scale) is a precision electronic scale designed to weigh items and simultaneously count them based on individual piece weight. It’s commonly used in industries for inventory management, packaging, and quality control.   Purpose of Counting Balance-Weighing Scale: To quickly and accurately count small items like buttons, beads, screws, or pills by weight. Eliminates manual counting, especially for large quantities.   Working Principle of Counting Balance-Weighing Scale: Weigh a sample quantity of items to determine the average weight of one piece. Place a bulk quantity on the scale. The scale divides the total weight by the unit weight to calculate the total item count.     Applications of Counting Balance-Weighing Scale: Textile accessories (buttons, rivets) Hardware (nuts, bolts, washers) Electronics (resistors, chips) Pharmaceuticals (tablets, capsules) Benefits of Counting Balance-Weighing Scale:   Fast and Accurate Counting - Saves time by quickly counting large quantities of small items. Reduces Human Error- Eliminates mistakes common in manual counting. Improves Productivity - Speeds up packing, inventory, and quality control processes. Versatile Use - Suitable for various industries: textiles, hardware, pharmaceuticals, electronics.   Cost-Efficient- Reduces labor costs and improves operational efficiency. Compact and Portable - Easy to move and use in different workstations. Dual Functionality - Can be used for both counting and standard weighing. Memory and Tare Functions - Stores unit weights and allows container weight deduction.   Features of Counting Balance-Weighing Scale: High Precision Sensors- Ensures accurate weight and count, even for tiny components. Digital Display- Separate displays for total weight, unit weight, and piece count. Tare Function - Allows deduction of container weight for net measurements. Memory Function - Stores frequently used unit weights for fast recall.   Multiple Units Support- Measures in grams, kilograms, pounds, etc. Sample Size Selection- Users can set sample sizes (e.g., 10, 20, 50 pcs) to calculate piece weight. Overload Protection- Prevents damage from excessive weight. Auto Calibration - Maintains long-term accuracy with internal or external calibration options. Sturdy Platform- Stainless steel pan with anti-slip design for stable weighing. Battery and AC Operation- Can run on rechargeable batteries or power adapter.   How to Use Counting Balance-Weighing Scale: Turn On the Scale - Power it on and wait for the display to stabilize at zero. Tare the Container - Place an empty container on the pan and press the "TARE" button to zero out its weight. Set Sample Size - Place a known quantity (e.g., 10 or 20 pcs) of identical items on the scale. - Enter the sample quantity using the keypad. Confirm Unit Weight - The scale calculates and stores the average unit weight automatically. Add Bulk Items - Add the rest of the items into the container. - The display will show the total count based on the stored unit weight. Record Results   - Note down the total piece count and remove the items. Turn Off After Use - Power off the scale to save battery or electricity.     Counting Balance /Weighing Scale Model : DS610C Brand : DIGISCALE Origin : Germany Capacity : 3 kg Division : 0.1g Min Weight : 0.5g Grade : Class 3 Platter : 280 × 215mm Battery : Rechargeable Battery with AC Adaptor Display : Double Large LCD Display Warranty : One Year Service Warranty SPECIFICATION Build With 5 Measuring Units: kg, g, lb, oz, PCS Count Platter : 280 × 215mm Quality : Heavy Duty Premium Quality Product Net / Gross Weight : 3080g / 3130g Battery : Rechargeable Battery with AC Adaptor Battery Capacity: 6V 4.5Ah / 20 HR Adaptor Power Input : AC 220V-240V / 50Hz Adaptor Power Output : 10V DC/ 500mA Display : Double Large LCD Display Color : White-Gray Keyboard : 20 Members Key Operating Temperature : 0-40°C (32-104°F) FEATURES Auto Zero Tracking Automatic Overload Display Grade Class 3 Auto Backlight Double LCD Display Low Battery Indication Rechargeable Battery with Adaptor Save Electricity Advantage Piece Counting Functionality: The DS603C Counting Weighing Scale is prepared with an precise piece checking highlight, perfect for stock administration, generation lines, and quality control assignments. This guarantees you can tally things like screws, jolts, or other little components efficiently. High-Precision Digital Scale Display: The advanced scale show gives clear and precise readings, making it simple to screen weight and amount. Its shinning and natural interface guarantees ease of use in diverse lighting conditions. Digital Scale Calibration: To keep up exactness, the DS610C weighing scale calibration prepare is direct, guaranteeing the scale remains dependable over time. Normal weight scale calibration ensures reliable execution, indeed with overwhelming use. Durable and Reliable Build: The DS610C advanced weight scale is created with strong materials to withstand visit utilize in requesting situations, such as stockrooms and fabricating facilities. Versatility: As a weighing and tallying scale, it combines the benefits of weight estimation and piece tallying in one gadget. This makes it appropriate for a wide extend of applications, from retail to mechanical uses. Categories: Digital Scale and Balance, Piece Counting Scale, Table Top Scale
Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

 
Add to cart
Quick view
Martindale abrasion tester updated
Martindale abrasion tester updated

Martindale abrasion tester Updated

$0.00

Martindale abrasion tester updated

Martindale abrasion tester updated

Latest Update 1 A+

Martindale Wear-Resistant Instrument Martindale Wear-Resistant Instrument Martindale abrasion tester updated purposefully designed to enhance the ease of use and reliability of results Strong and solid base feet to increase instrument stability Sliding pad design reduces noise of motion plate. Martindale abrasion tester updated Accessible Motion plate storage rack incorporated into the side of the instrument to conserve lab space and allowing full access to all abrasion stations Enhanced sample holders allowing for quicker sample loading Quick-lock couplers facilitate easy access for service and calibration Martindale abrasion tester updated is a versatile instrument capable of multiple abrasion and pilling tests. It uses precision components to deliver the exact abrasion or pilling movement required by all international and retailer standards. Martindale abrasion tester updated Full Color Touch Screen Controls Most common functions accessible in one or two touches Displays individual station counters Test materials ordering information accessible directly on the instrument display Multi-lingual interface with display options in English, Chinese. Martindale abrasion tester updated Designed for Adaptability the Martindale Line can perform a variety of abrasion and pilling tests. The user-friendly design allows operators to easily change over testing station configurations with specialized enhancement kits. Martindale abrasion tester updated can be used for: Fabric Abrasion, Fabric Pilling, Sock, Abrasion, Leather Abrasion, Edge Abrasion, Testing Floor Coverings, Toothbrush Testing's, Other Specialized Testing's, Martindale abrasion tester updated Convenient The compact base is designed to conserve valuable lab space while providing maximum testing capacity. Two sizes available: Larger base can have 4, 6, or 9 test positions Instrument Comes Standard with: Sample Holders 9 kPa and 12 kPa Weights for standard abrasion testing Standard Mounting Device Martindale abrasion tester updated have Accessory Holder Available separately to conveniently hold martindale accessories while not in use Made from high quality acrylic and designed to be both practical and attractive Quality Test Materials supplies a wide variety of consumables design specifically for testing on the Martindale Abrasion and Pilling Tester. These high quality consumables will ensure that each test performed is accurate and reliable. Martindale abrasion tester updated Scope of application Its is used for testing the wear resistance, abrasion and appearance change (pilling) of textiles and membrane materials (Martindale method). Martindale abrasion tester updated Related standard GB/T 21196 (International Standard Drafting Unit), FZ/T 20020, GB/T 4802.2, GB/T 13775, ASTM D4966, ASTM D4970, ASTM D3886, ISO 12945.2, ISO 12947, JIS L1096, IWSTM 196/TM112 M&S, etc. [Instrumentation characteristics] 1. Three test modes, adding and subtracting two counting modes. 2. No turning guide plate design, no need to move the sample. 3. PLC modular control, seven inch color touch screen, Chinese and English double-choice menu operation. [Technical parameters] 1. Workplace:9 place 666665555 2. Counting range:0-999999 times 3. Maximum travel:60.5±0.5mm 24±0.5mm 4. Pressure mass:
  1. Clothing sample weight hammer:397±2g Furniture decoration sample weight hammer:597±2g C. Stainless steel discs:260±1g
  2. Effective friction diameter of grinding block: Type A 198g(3kpa) friction head 28.8-0.084mm Type B 155g(1.52N) friction head 90-0.10mm 6. Relative velocity of gripper and grinding table:50 + 2R / MI (20-70r / min adjustable) 7. Sampling hammer quality:2385±10g 8. Shape size:870×580×300mm 9. power supply:AC220V 50Hz 500W 10.Weight:73KG.
  3. [Standard accessories] Items and specifications Qty Notes Main machine 1Power cable 1A type 198g Friction head 9 B type 155g(1.52N) Friction head 9 597g Hammer 9 397g Hammer 9, 666666666 260g Stainless steel disc 9, 2385g Holding hammer 1,B Friction head felt 18 ￠90mm Steel ball 6, Rubber ring 18, Inner Hexagonal Wrench 1
  4. Sampler 1, Fuse 2 3A, Standard felt 18, Weight:750±50g/m2, Thickness:2.5±0.5mm, Standard foam lining 40, Density:0.03g/cm3,Thickness:3mm,Standard abrasive 9 Circular shear template Each φ140mm、φ38mm,Small screw knife 1, Bottom foot 4
   
Add to cart
Quick view
Spray Rating Tester
Spray Rating Tester

Spray Rating Tester

$0.00

Spray Rating Tester

Spray Rating Tester

Spray Rating Tester

  The Spray Rating Tester is a textile testing instrument used to evaluate the water resistance or water repellency of fabric surfaces. It measures how well a fabric can resist wetting when exposed to a controlled spray of water, helping assess its performance in rain or damp conditions.   Purpose of Spray Rating Tester - To assess surface wetting resistance of textiles. - Commonly used for outdoor clothing, rainwear, tents, and performance fabrics.   Working Principle of Spray Rating Tester - A fabric specimen is mounted at a 45° angle. - Water is sprayed from a standard nozzle for a specific time. - After spraying, the fabric is visually rated based on the appearance of water drops and wetting.   Key Components of Spray Rating Tester - Spray Nozzle: Delivers a consistent, standard water spray. - Funnel & Reservoir: Controls the flow and volume of water. - Specimen Holder: Positions the fabric at a 45° angle. - Spray Stand: Ensures accurate nozzle height and positioning.   Standards Used of Spray Rating Tester - AATCC 22 - ISO 4920 - BS EN 24920   Applications of Spray Rating Tester - Rainwear and water-resistant textiles. - Quality control in fabric finishing. - R&D for performance apparel.   Benefits of Spray Rating Tester:
  1. Quick and Simple Evaluation - Offers a fast way to assess fabric water repellency without complex setup.
  2. Standardized Testing- Complies with AATCC 22 and ISO 4920, ensuring globally accepted results.
  3. Cost-Effective- Low maintenance and no power requirement make it economical for routine lab use.
 
  1. Improves Fabric Performance - Helps manufacturers develop or improve water-resistant textiles.
  2. Non-Destructive Test - Does not damage the fabric, allowing for additional tests on the same sample.
  3. Visual Grading- Easy to interpret using a standard spray rating chart (0 to 100 scale).
  4. Supports Quality Control - Detects finish degradation or variation in water-repellent treatments.
  5. Portable and Compact- Lightweight design allows easy use in various lab or field settings.
  Features of Spray Rating Tester:
  1. Standardized Spray Nozzle - Delivers consistent water spray per AATCC and ISO specifications.
  2. 45° Specimen Mounting Angle - Ensures uniform test setup for accurate and repeatable results.
  3. Stainless Steel or Aluminum Frame - Corrosion-resistant and durable for long-term use with water exposure.
 
  1. Water Reservoir and Funnel System - Provides precise water volume (usually 250 ml) for each test.
  2. Graduated Spray Stand- Fixed height (150 mm above specimen) for controlled spray impact.
  3. Detachable Specimen Holder- Easy loading and removal of fabric samples.
  4. Compact and Lightweight Design - Portable and convenient for both lab and field testing.
  5. No Electricity Required - Fully manual operation increases reliability and reduces operating costs.
  How to Use Spray Rating Tester:
  1. Prepare the Sample - Cut fabric to standard size (usually 180 × 180 mm). - Condition the sample if required (21°C, 65% RH for 24 hours).
  2. Mount the Fabric - Place the fabric on the specimen holder at a 45° angle.
  3. Fill the Reservoir - Pour 250 ml of distilled water into the upper funnel.
 
  1. Start the Test - Release the water through the nozzle; it sprays over the fabric for about 25–30 seconds.
  2. Inspect the Fabric - After spraying, visually assess the water beading or penetration on the surface.
  3. Rate the Sample - Compare the fabric’s wetting pattern with the standard spray rating chart: - 100 = No sticking/wetting - 90–50 = Partial wetting - 0 = Complete wetting
  4. Record the Rating - Document the spray rating for quality control or reporting.
  Spray Rating Tester, Water Repellency Tester Spray Reting Tester [Scope of application]: Used for the determination of moisture resistance (wetting grade) of various fabrics which have been or have not been treated with water resistance or water repellency. [related standards]: GB/T4745 ISO4920 AATCC22 JISL1092 etc. [technical parameters]: 1. Glass funnel:150 x 150 (capacity 500ml) 2. Specimen placement angle:The level is 45 degrees. 3. Distance from nozzle to sample center:150mm 4. Specimen diameter:Ф150mm 5. Size of water receiving pan:500×400×30mm 6. Matching measuring cups:500ml 7, size 500 x 400 x 500mm 8. Instrument weight:5Kg
Add to cart
Quick view
Xenon Arc Light Fastness Tester
Xenon Arc Light Fastness Tester

Xenon Arc Light Fastness Tester

$0.00
Xenon Arc Light Fastness Tester Xenon Arc Light Fastness Tester is a laboratory instrument used to evaluate the color fastness
Add to cart
Quick view

SALE PRODUCTS

Color Matching Cabinet -light Box

Color Matching Cabinet-Light Box

, ,
$0.00

Color Matching Cabinet-Light Box

Color Matching Cabinet-Light Box x

Color Matching Cabinet-Light Box

Color Matching Cabinet -light Box A Color Matching Cabinet-Light box (also known as a Light Box) is a standardized visual assessment tool used to evaluate the color consistency of materials like fabric, paint, plastic, paper, and leather under different lighting conditions. Purpose of Color Matching Cabinet-Light Box : To detect color variations and metamerism (color changes under different lights). Ensures accurate color matching across production batches and materials.   How Color Matching Cabinet-Light Box Works: The cabinet is equipped with multiple standardized light sources (e.g., D65, TL84, UV, CWF, A). Samples are placed inside, and their colors are observed under each light to check for consistency.   Common Light Sources of Color Matching Cabinet-Light Box: D65 – Daylight (standard) TL84 – Store lighting (fluorescent) CWF – Cool white fluorescent UV – Ultraviolet (for fluorescent content) A – Incandescent (home light) U30/U35 – Warm white for showroom lighting     Applications of Color Matching Cabinet-Light Box: Textile and garment inspection Paint and coating industry Plastics and packaging Printing and graphic design   Benefits of Color Matching Cabinet-Light Box: Accurate Color Assessment - Ensures color consistency across products by simulating different lighting conditions. Detects Metamerism - Identifies if colors appear differently under various lights, preventing mismatches. Improves Quality Control - Enhances visual inspection processes in textiles, printing, and packaging.   Standardized Viewing Conditions - Provides consistent light sources for reliable and repeatable evaluations. Reduces Rework and Returns - Helps detect color defects early, saving time and production costs. Supports Industry Standards - Meets international color evaluation standards like ASTM D1729, ISO 3664.   Easy to Use of Color Matching Cabinet -Light Box  - Simple controls with clearly labeled light source buttons. Multiple Light Source Options   - Enables testing under conditions matching retail, daylight, home, and UV lighting. Features of Color Matching Cabinet-Light Box: Multiple Standard Light Sources   - Includes D65 (daylight), TL84 (store light), CWF, UV, A (home light), and optional U30/U35. Digital Hour Meter   - Tracks usage time for each light source to schedule timely replacements. Uniform Light Distribution   - Diffused lighting ensures consistent and shadow-free viewing.   Push Button Control Panel- Easy switching between different light sources. No Warm-Up Time - Instant-on lighting allows immediate use. Sturdy Metal Body - Durable and well-coated to reduce light reflection and distortion. Viewing Area Markings - Guides for proper sample placement and comparison. Optional Dimming Function - Adjustable light intensity (in advanced models) for fine-tuned observation.   Standardized Viewing Angles  - Ensures observer views samples under consistent angles for accurate color judgment.   Description of Color Matching Cabinet-Light Box Color Matching TILO 2 Feet 5/6 Option Light Box Cabinet (P60-5/6) TILO 2 Feet 5/6 Option Light Box Cabinet (P60-5/6) is equipped with 5 light sources. The consistency of the light sources in all Tilo Color Assessment Cabinets gives excellent viewing conditions for reliable color critical decisions under consistent lighting. TILO 2 Feet 5 Option Light Box Cabinet (P60-5) can be applied to the industries that need to perform color difference testing as follows: as the premiere designer and manufacturer of color matching instrument products for the Graphic arts, Photographic, Textile, Dyeing, Packaging, Printing, Leather, Inks, Knitwear, Plastic, Automotive and Ceramics industries. TILO 2 Feet 5 Option Light Box Cabinet (P60-5) offers an exact and dependable way to survey colors beneath different lighting conditions. This apparatus is planned to offer assistance experts in the material, paint, and plastic businesses to coordinate and assess colors with exactness. This high-quality item in Bangladesh at the best cost. The color Cabinet box permits for an ideal seeing environment for color inspection. Features of TILO 2 Feet 5 Option Light Box Cabinet (P60-5) Multiple Light Sources of Color Matching Cabinet-Light Box The lTILO 2 Feet 5 Option Light Box Cabinet (P60-5) incorporates a assortment of light sources. These sources can reenact common sunshine, tungsten, and other counterfeit lighting conditions. By changing light sources, clients can compare colors in diverse situations, guaranteeing precise results. Adjustable Light Intensity of Color Matching Cabinet-Light Box The color coordinating light box highlights flexible light concentrated. You can control the brightness to coordinate distinctive real-world conditions. It guarantees a more point by point investigation of how colors alter beneath different lighting intensities. Compact and Solid Design This color appraisal cabinet comes in a compact plan, making it simple to put in any workspace. Its strong structure guarantees long-term utilize, indeed in requesting environments. Precise Color Evaluation The light box gives a controlled environment that makes a difference clients assess colors in a steady way. This highlight is particularly valuable in businesses where correct color coordinating is basic, such as in materials or paints. Energy Efficient The color cabinet is outlined to be energy-efficient. It employments Driven lights that devour less control whereas still advertising dependable and precise color assessment. Simple Client Interface The user-friendly interface of the color coordinating cabinet makes it simple for anybody to work. The controls are straightforward, and clients can alter settings effortlessly. Portable Design The color coordinating light box is lightweight, making it simple to move from one area to another. This movability is particularly valuable when you require to take the cabinet to diverse parts of the generation floor or to different client locations. Ideal for Different Industries Whether you work in materials, car, or fabricating, the color appraisal cabinet offers the exactness and unwavering quality required for color coordinating. It ensures consistency over distinctive materials and generation lines. FEATURES Certified by ASTM D1729, ISO3664, DIN, ANSI and BSI. Automatic changeable into another light source by switching. Usage time display, name of lamp, total number of switches for each. Violated time sensor for tracking lamp service or replacement. Large display & individual switch, easy to operate each light source. No warm-up time, just plug and play. The energy-saving device which generates lower heat & high efficiency. The name of the light source can be changed. SPECIFICATION OF TILO 2 FEET 5 OPTION LIGHT_BOX CABINET (P60-5) Name Details Model P60(5) Brand TILO Origin Hong Kong Dimensions (WxDxH) (710 x 405 x 570)mm Standards ASTM D1729, ISO3664, DIN, ANSI and BSI Light source Five light source. Power Source Electric. Voltage 220 ~ 240V Body Material Fiber-reinforce Warranty One year free service LIGHT SOURCE OF TILO 2 FEET 5 OPTION LIGHT_BOX CABINET (P60-5) Light Source Color viewing applications / Uses of Light Color Temp. (K) Power (W) Brand Info Quantity D65 International standard Artificial Daylight / Natural Daylight 6500 18 PHILIPS; TL-D/18-965 2 Pieces TL84 Applied to stores in Europe, Japan and China 4000 18 PHILIPS; TL-D/18-840 2 Pieces F “Sun-setting Light Yellow” incandescent light source 2700 40 PHILIPS 4 Pieces UV ultraviolet light to detect and evaluate optical brighteners or fluorescent pigments Wave length: 365nm 20 PHILIPS 18W BLB 1 Pieces CWF (Cool White Fluorescent) American Standard 4150 18 PHILIPS; TL-D/18-640 2 Pieces      
Add to cart
Quick view
Fabric Drape Tester
Fabric Drape Tester

Fabric drape tester

$0.00
Fabric Drape Tester
Fabric Drape Tester

Fabric Drape Tester

  Fabric Drape Tester is a lab device used to measure the drape ability of fabric—how it hangs under its own weight. It assesses how fabric conforms in folds or waves, which affects garment appearance and comfort.   Purpose of Fabric Drape Tester: To evaluate the aesthetic and functional behavior of a fabric when suspended, especially important in apparel and home textiles.   Working Principle: A circular fabric specimen is placed over a smaller disc. The unsupported edges drape downward. A light source casts a shadow of the draped shape onto a recording surface or scanner. The area of the shadow is measured to calculate the drape coefficient.   Main Components of Fabric Drape Tester: - Rotating Support Disc: Holds the fabric. - Light Source: Projects the drape shadow. - Paper or Digital Scanner: Captures the drape outline. - Template: For cutting fabric to standard test size. - Software or Plan meter: Calculates the drape coefficient.   Applications of Fabric Drape Tester: - Fashion and apparel design - Fabric development - Quality control in woven, knitted, or nonwoven fabrics   Benefits of Fabric Drape Tester:
  1. Quantifies Fabric Flow - Measures drape behavior accurately, crucial for garments and furnishings.
  2. Supports Design Decisions - Helps designers select fabrics that match the intended look and movement of a product.
  3. Improves Garment Fit and Comfort - Ensures fabrics behave naturally on the body, enhancing wear ability.
 
  1. Enhances Product Aesthetics - Prevents stiff or limp fabric choices in fashion, interior, or technical textiles.
  2. Standardized Evaluation - Enables comparison across fabrics using drape coefficient, based on standards (e.g., BS 5058).
  3. Supports R&D - Useful in developing new fabrics or finishes to improve drape quality.
 
  1. Non-Destructive Testing - Tests fabric without damaging it, allowing for further analysis.
  2. Boosts Quality Control - Identifies batch inconsistencies or performance issues early in production.
  Features of Fabric Drape Tester:
  1. Rotating Support Disc - Holds the fabric sample over a smaller disc to create natural drape.
  2. Standard Sample Size Support - Designed for circular fabric samples, usually 30 cm in diameter.
  3. Light Projection System - Projects the draped fabric’s shadow onto a screen or recording surface.
 
  1. Drape Coefficient Calculation - Measures the shadow area to compute the drape coefficient (percentage of unsupported area covered by the shadow).
  2. Digital or Manual Options - Available in models with digital image processing or manual plan meter tracing.
  3. Stable Base and Structure - Ensures consistent and vibration-free testing conditions.
 
  1. Sample Templates Provided - For cutting precise, standard-sized fabric specimens.
  2. User-Friendly Interface - Simple controls for rotation and light alignment.
  3. Compact and Lab-Ready Design - Fits easily on lab benches and in testing environments.
  4. Compliance with Testing Standards - Supports BS 5058 and other relevant drape measurement methods.
  How to Use Fabric Drape Tester:
  1. Prepare the Fabric Sample - Cut a circular fabric sample, typically 30 cm in diameter, using the provided template.
  2. Place the Fabric - Center the fabric sample over the smaller support disc (usually 18 cm diameter) on the tester.
  3. Turn on the Light Source - Illuminate the fabric from above so it casts a shadow onto the recording surface or paper below.
 
  1. Capture the Shadow Outline - Trace the shadow manually on paper or capture it digitally, depending on the model.
  2. Measure the Shadow Area - Use a plan meter (manual) or software (digital) to determine the shadow’s area.
  3. Calculate Drape Coefficient (DC) - Use the formula:
DC (%) = (Shadow Area - Support Disc Area) / (Full Fabric Area - Support Disc Area) × 100  
  1. Record the Result - Log the drape coefficient to evaluate how stiff or flexible the fabric is.
  2. Repeat for Accuracy - Test multiple samples and average the results for consistency.
    fabric drape tester Scope of application It is used for testing dynamic and static drape properties (drape coefficient, shape change rate, surface ripple and drape uniformity, etc.) of various fabrics. Related standards GB/T23329 FZ/01045 BS5058 etc. Instrument characteristics 1. CCD imaging, dynamic and static image processing. 2. A variety of charts and data statistics, analysis, storage, output 3. No need to replace background color, can test all kinds of color samples. 4. Work mode:Microcomputer control, CCD imaging, automatic processing of images and data automatically. Technical parameters 1. Communication interface: RS232, USB 2. Image sensor: CCD sensor. 3. Static (dynamic) state draping coefficient: 0 ~ 100% + 2 4. Drapability uniformity: 0 ~ 100% + 2 5. The rate of morphological change is 0 to 100% + 2. 6. Surface waviness error: + 1
Add to cart
Quick view
Pneumatic bursting tester

Bursting strength tester

,
$0.00
Bursting strength tester

Pneumatic bursting strength tester

true burst

Pneumatic bursting tester China national patent：ZL201210486480.8 ZL201220628425.3 Pneumatic bursting strength tester China national patent：ZL201210486480.8 ZL201220628425.3 [Scope of application]: It is used to measure the burst strength and burst expansion degree of various fabrics, including knitted fabrics, woven fabrics, non-woven fabrics, laminated fabrics and other fabrics made by other processes, under standard conditions or wet conditions. This method is employed to assess the burst strength and degree of burst expansion of various types of fabrics, such as knitted, woven, non-woven, laminated, and others produced through different processes, under both standard and wet conditions. This technique is utilized to evaluate the burst strength and extent of burst expansion in various fabric types, including knitted, woven, non-woven, laminated, and others produced through diverse manufacturing processes, under both standard and wet conditions. Benefits of Bursting strength tester: Fast testing cycle for fast feedback to the production • Auto-start, a photocell detects the presence of a sample and automatically initiates a measurement sequence, thus allowing hands-free operation • Auto-cycling function permits the continuous cycling of the upper pressure foot to facilitate representative and continuous measurements
  • Available with automatic test strip feeder Measurements are simple to make with the Mullen type Bursting Strength Tester. Fast automatic measurements Measurement starts automatically once a test piece has been placed in the measuring gap. The clamping foot descends, and a bursting strength measurement is made.
The sample is then quickly released and is ready for the next measurement at a new position. To maximize the sample measurement rate, the tester uses a minimum of time between the bursts, so that a series of 10 measurements can be done in less than 45 seconds. The actual measuring time depends of course on the type of paper or paper board being tested. Three Different test results can be reported after a single measurement; bursting strength standard, bursting strength compensated, and bursting energy absorption (BEA).Bursting strength tester can be compensated for the stiffness of the diaphragm For low bursting strength levels, the stiffness of the diaphragm can account for a large portion of the bursting strength value. If desired, the device can also measure, calculate, and report effective bursting strength compensated from the effects of the diaphragm. Measurement of Bursting Energy Absorption (BEA) is used to determine the energy absorption capability of a material. Strong, flexible paper has higher energy absorption values, while brittle, stiff paper has lower values. Bursting Strength Tester calculates and reports BEA according to the SCAN P 24 standard Related standards of Bursting strength tester: GB/T7742.2 (the first drafting unit of national standards) ISO13938-2, etc. [Instrument characteristics]: 1. Microcomputer control, automatic burst test, automatic correction, automatic data processing, and output results in the form of experimental report. 2. Aerodynamics, high cleanliness. 3. Color touch screen interface, Chinese and English menu operation, support online communication.
  1. Bursting pressure can reach up to 1.2MPa 5. The maximum burst and expansion degree can reach 70mm. 6. Strengthen the lighting system on the test surface. 7. The main aerodynamic force helps to clamp the sample system. 8. A variety of test areas are available, and the switching is easy.
  2. A variety of unit conversions between Chinese and English. 10. Reliable anti-pinch safety protection design. [Technical parameter]: 1. Test range: (0～1)Mpa (the range above 1Mpa needs to be customized) 2. The minimum graduation value: 0.0001Mpa 3. Pressurization mode: direct pressurization, timing pressurization, and expansion degree pressurization.
4. Test accuracy: ≤±0.2%F·S 5. Thickness of elastic diaphragm: ≤2mm 6. Testing area: cm²） 100 50 10 7.3 Dia.φ（mm） φ112.8 φ79.8 φ35.7 φ30.5 7. Air pressure rate: non-linear segmented pressurization (0.1～0.5) L/min 8. Safety cover: high-transparent plexiglass 9. Power supply: AC220V±10% 50Hz 800W 10. Dimensions: (470×490×780)mm (host L×W×H)
Add to cart
Quick view
Digital Elmendorf Tearing Tester

Digital Elmendorf tearing tester

,
$0.00
Digital Elmendorf Tearing Tester
Digital Elmendorf Tearing Tester

Digital Elmendorf Tearing Tester

  Digital Elmendorf Tearing Tester is a precision instrument used to measure the tear strength of materials like woven fabrics, paper, plastic films, and nonwovens. It determines how much force is required to continue tearing a pre-slit sample. Key Functions of Digital Elmendorf Tearing Tester: - Measures propagation tear resistance, not initial tear. - Uses a pendulum to apply force; the energy lost during tearing is calculated to determine tear strength. - Equipped with a digital display for direct reading of results in grams or millinewtons. Core Components: - Pendulum Arm: Applies tearing force. - Clamps: Secure the sample before and after the tear. - Cutting Blade: Creates a precise slit at the start of the test. - Digital Display Unit: Shows the tearing force result clearly and instantly. - Counterweights: Optional weights for increasing test range (for stronger materials).   Applications of Digital Elmendorf Tearing Tester: - Testing tear resistance of: - Textile fabrics (especially woven) - Paper and cardboard - Plastic films - Nonwovens - Packaging materials Benefits of Digital Elmendorf Tearing Tester:
  1. Accurate Tear Strength Measurement - Provides precise data on tear resistance, critical for quality control and product performance.
  2. Digital Readout - Easy-to-read display gives instant, reliable results without manual calculations.
  3. High Reproducibility - Ensures consistent test outcomes due to controlled tearing angle and speed.
 
  1. Fast Testing Process - Simple loading and quick test cycle increase lab efficiency.
  2. Suitable for Various Materials - Tests a wide range of flexible materials like textiles, paper, plastic, and packaging.
  3. Customizable Range - Use of optional weights extends the test range for low to high tear strength materials.
  4. Low Sample Waste - Requires small fabric or material samples, reducing waste during testing.
  5. Standards Compliance - Meets international testing standards (e.g., ASTM D1424, ISO 13937) for credibility and uniformity.
Features of Digital Elmendorf Tearing Tester: Digital Display - Provides accurate and direct reading of tear strength in grams, mN, or cN. Pendulum Mechanism - Uses a swinging pendulum to simulate tear propagation with consistent force. Adjustable Test Range - Includes interchangeable pendulum weights to test various material strengths.
  1. Precision Sample Clamp - Securely holds samples in place to ensure accurate tear initiation.
  2. Pre-Cutting Blade - Integrated knife creates a precise initial slit in the sample before tearing.
  3. User-Friendly Interface - Simple buttons and screen navigation for ease of operation.
  4. Standard Test Compliance - Compatible with ASTM D1424, ISO 1974, ISO 13937, and other tear strength standards.
  1. Sturdy Construction - Made with durable materials for long-lasting performance and stable operation.
  2. Compact Design - Space-efficient footprint ideal for laboratory environments.
  3. Data Output Options- Some models offer USB or printer connectivity for result documentation.
How to Use a Digital Elmendorf Tearing Tester:
  1. Prepare the Sample - Cut the material (fabric, paper, film, etc.) to standard size (typically 100 × 63 mm for textiles) and slit it with the pre-cutter as required.
  2. Select Pendulum Weight - Choose the appropriate pendulum or add counterweights based on expected tear strength.
  1. Calibrate the Machine - Set the pendulum to its starting position and zero the display.
  2. Clamp the Sample - Fix one half of the sample in the stationary clamp and the other in the moving clamp.
  3. Cut the Initial Slit - Use the integrated blade to make a precise cut at the marked slit area (usually 20 mm).
  1. Release the Pendulum - Trigger the pendulum to swing and tear the sample through the pre-slit.
  2. Read the Result - The digital display will show the tearing force automatically (in g, mN, or cN).
  3. Record or Export Data - Save or print the result if your model supports USB or printer connection.
  4. Reset for Next Test - Reposition the pendulum and prepare a new sample for the next cycle.
Safety Tip: - Always ensure your hands are clear before releasing the pendulum.   Digital Elmendorf tearing tester Scope of application It is used for the determination of the tear resistance of various woven fabrics (Elmendorf method), and it can also be used for the determination of the tear resistance of thick paper, plastic sheeting, electrical tape, etc. Related standards GB/T 3917.1 FZ/T60006 FZ/T75001 ISO1974/9290 ASTM D1424/5734 etc. Instrument characteristics 1. Maximum 300N test range 2. Microcomputer control, digital decoding, support online communication 3. Color touch screen control, Chinese and English menu operation interface 4. Pneumatic clamping, automatic cutting 5. A variety of measurement units (cN, gf) selection 6. Fully automatic operation with safe operation protection. 7. Automatically increase potential energy [Technical parameter]: 1. Test range: first gear: (0～16)N second gear: (0～32)N third gear: (0～ 64)N fourth gear: (0～128)N fifth gear: (0～300)N 2. Test accuracy: ≤±0.2%F·S 3. Tearing length: 43mm (non-standard 30-60mm can be set) 4. Automatic incision length: (20±0.2)mm 5. Sample size: (100×63)mm 6. Specimen clamping: pneumatic way 7. Sample test: Up to 10 sets per group on the device side, and 30 sets of data can be selected to be saved 8. Power supply: AC220V±10% 50Hz 100W 9. Dimensions: (650×660×680)mm 10. Weight: 50kg [Sample of control interface]:(English version is also available.)
Add to cart
Quick view
Stretch Recovery Tester (Static Method)

Stretch Recovery Tester Static Method

,
$0.00

Stretch Recovery Tester Static Method 

Stretch Recovery Tester (Static Method)

Stretch Recovery Tester

  A Stretch Recovery Tester Static Method is a lab instrument used to evaluate the stretch ability and recovery properties of fabrics, elastomers, or other stretchable materials. This method is crucial in textiles and material science to assess how well a material returns to its original shape after being stretched. Key Functions of Stretch Recovery Tester Static Method : - Measures elongation under a fixed force or length. - Assesses the recovery percentage after a specified recovery time once the force is removed. - Evaluates fabric's resilience, durability, and comfort properties. How It Works Stretch Recovery Tester  Static Method:
  1. A sample is stretched to a predetermined extension or force.
  2. The stretch is maintained for a set period.
  3. After removing the load, the recovery (return to original length) is measured after a fixed time.
  4. The fabric sample is clamped and stretched to a specific length or force.
  5. It’s held for a fixed duration (e.g., 1–5 minutes).
  6. The tension is released, and the sample is allowed to recover.
  7. The recovered length is measured after a set time.
Main Components: - Fixed clamps to hold the sample. - Movable clamps for stretching. - Precision scale or ruler for measuring elongation and recovery. - Timing device (manual or digital) to control stretching and recovery periods. - To assess elastic recovery and dimensional stability after stretching. Applications: - Used in testing knitwear, sportswear, elastic fabrics, and compression garments. - Helps in product development and quality assurance. Stretch Recovery Tester Static Method is designed to determine the stretch recovery property of elastic material by static method. 2.0mm thickness stainless steel frame and base board, makes the tester firm and stable. Sample holder can be slid along the guide rail smoothly and can be fixed at any position of the rail. Test Scope：elastomeric material Testing Standards：ASTM D2594、ASTM D3107, etc. key features of a Stretch Recovery Tester Static Method: Adjustable clamps and measurement scale. - Timer for accurate stretch/recovery periods. - Simple mechanical design for ease of use. ✅ 1. Manual or Semi-Automatic Operation - Allows controlled stretching and recovery measurements. - Simple setup for routine quality control. ✅ 2. Adjustable Clamp System - Securely holds samples of various sizes and thicknesses. - Ensures consistent test conditions. ✅ 3. Precision Measurement Scale - Provides accurate readings of elongation and recovery length. - Often graduated in millimeters or inches. ✅ 4. Sturdy Frame - Made of corrosion-resistant metal or coated steel. - Ensures durability and stability during testing. ✅ 5. Time Control Support - Timer to monitor stretch and recovery durations. - Helps standardize test procedures. ✅ 6. Compact Design - Space-saving for lab environments. - Easy to move and operate. ✅ 7. Compliance with Standards - Often designed to meet standards like ASTM D3107 or BS 4294. Would you like a comparison with the dynamic method or specifications for a particular model? key benefits of using a Stretch Recovery Tester Static Method: ✅ 1. Accurate Fabric Performance Analysis- Provides reliable data on stretch and recovery, critical for assessing elasticity and fit. ✅ 2. Easy to Operate- Simple, manual setup makes it ideal for routine testing and quality control. ✅ 3. Cost-Effective- More affordable than dynamic testers, making it suitable for smaller labs or production units. ✅ 4. Standardized Testing- Supports industry-standard methods (e.g., ASTM D3107), ensuring consistency across tests. ✅ 5. Versatile Applications- Suitable for testing knit fabrics, elastic bands, spandex materials, and other stretchable textiles. ✅ 6. Durable and Low Maintenance- Mechanically straightforward with minimal upkeep required. ✅ 7. Enhances Product Development- Helps designers and manufacturers optimize materials for comfort, performance, and durability. Applications: - Textile R&D - Production quality control
Stretch Recovery Tester (Static Method)

Stretch Recovery Tester

- Evaluating materials for comfort, durability, and fit Stretch Recovery Tester Diller In Bangladesh, Stretch Recovery Tester Importer In Bangladesh, Stretch Recovery Tester in Bangladesh, Stretch Recovery Tester in Bd, Stretch Recovery Tester In Uttara, Stretch Recovery Tester Price in Bangladesh, Stretch Recovery Tester Supplier in Bangladesh  
Add to cart
Quick view
Lab Equipment & Instrument
IR Dyeing Machine Dunlin

IR Dyeing Machine Dunlin

, ,
$0.00
IR Dyeing Machine Dunlin
IR Dyeing machine Dunlin is Safe, high efficiency, environment friendly, energy saving, optimum for new dyeing small sample machines

IR Dyeing Machine Dunlin

24 pot 300 ml IR Dyeing Machine Dunlin Application  This machine is oil bath type infrared laboratory dyeing machine, it combine the advantages of traditional glycerol dyeing machine with common infrared dyeing machine together. It’s apply to dyeing and testing the color fastness of the knitted fabric, woven fabric, yarn, cotton, loose fiber, zipper etc. It was special design for dyeing industry, chemical industry, raw material, cloth which can simulate the production conditions exactly and reach the process effect. Used for simulate the dyeing process in actual production, even apply for the small-batch production. Characteristics  Safety, high efficiency, environmental protection, energy saving and consumption reduction, which can fully meet the requirements of dyeing and color matching experiments; segmented heating sampling experiments, segmented, uniform  dyeing and Permeability test, dye absorption rate tests of pH, temperature and bath ratio differences, concentration and other tests, etc. In addition, the machine is highly personalized, and can make different specifications of dyeing steel cups according to customer needs. Feature   Easy to operate, dye pot can be individually Turn plate removed to save waiting time. The ability to conduct the tests of various dyes and chemicals on dispersing, leveling, liquor ratio exhausting etc. l Special recommendation for “STEP DYEING "to select the best dyestuff and combinations for the most Suitable dyeing curve to achieve the highest efficiency and quality Different sizes of dye pots for various weight of samples with yarn or fabric holders to ensure the good leveling result .There will be no crease mark.  Suitable for low liquor ratio dyeing. Sample weight from 4g to 20g.  Special design for humanity, durability and easy-maintenance. Safe, high efficiency, environment friendly, energy saving, optimum for new dyeing small sample machines Product Parameter of IR Dyeing machine Dunlin specifically designed with a focus on human usability, durability, and ease of maintenance. It prioritizes safety, high efficiency, and environmental friendliness while also being energy-saving. This machine is optimal for new dyeing small sample machines due to its product parameter advantages. specifically designed to prioritize humanity, durability, and ease of maintenance. It offers a safe, high-efficiency operation while being environmentally friendly and energy-saving. This machine is optimal for new dyeing small sample machines due to its specialized features and product parameters.  Model : IF-24S Infrared Laboratory Dyeing Machine Key Specification Model : IF-12S IF-24S Staining cup number 12/24 Staining cup volume 300cc OR 425cc Control mode LCD Microprocessor type, programmable process number: 100(0—99), 100 programmable steps per process Heat method Infrared heat Temperature range RT - 140 ℃ Temperature control accuracy ±0.2 ℃ Heating rate

0 - 3.5 ℃ / min Cooling rate 0.2 - 5 ℃ / min Cooling method Air-cooled Rotation speed 0 - 60 rpm Liquor ratio 1:5 -1:100 Power supply 1∮AC 220V 50/60HZ Dimensions( L x W x H) 670×670×780mm 860×680×780mm Weight 100kg 120kg Standard Accessories Cups 1set

Put the test sample. Cups stand 1set Place where to put cups. Protective glove 1set To avoid to be hurt by HT cups. Model: IF-24SCapacity: 24 pots Brad: DUNLIN Origin: China

Color dyeing tests for various dyestuffs of IR Dyeing machine Dunlin
  1. Step dyeing tests. C. Dispersing, levelling and impregnating test. D. High or low liquor ratio exhausting tests. E. Fabric steak and staining tests. F. Concentration tests and others. Protection and Safety gates to protect. Temperature control accuracy +/- 0.2degree
Working temperature of IR Dyeing machine Dunlin 20 – 140 degree Heating rate of dye bath 0 – 3.5degree / min Cooling rate 0.2 – 5 degree / min Cooling method air-cooled / Auto Speed control frequency conversion Rotation speed 0 – 60 turn / min Microprocessor type Newhaven controller 99 programs each Program with 99steps. IR Dyeing Machine Dunlin
IR Dyeing machine

IR Dyeing machine

 
Add to cart
Quick view
Digital hot plate-magnetic stirrer
Color Matching Cabinet -light Box

Digital hot plate-magnetic stirrer

,
$0.00

Digital hot plate-magnetic stirrer

Digital hot plate-magnetic stirrer

Digital hot plate-magnetic stirrer

  A digital hot plate-magnetic stirrer is a laboratory device that combines two essential functions: heating and stirring. It is widely used in chemistry, biology, and physics laboratories for preparing solutions, mixing chemicals, and conducting experiments that require controlled heating and stirring. Model : (DL-300) Brand : DUNLIN Origin : TAIWAN Set-up plate Dimensions : Ø 135 mm Motor type : DC Motor Speed range : 0-1500 rpm Display : 5 Inch LED Display Heating temperature range : Room Temp. 0-280°C Temperature display : 5 Inch LED Display Temperature display accuracy : ±0.1 Protection class according to DIN EN 60529 : IP42 Power Supply : 200-240V 3A Dimensions ( W x D x H ) : ( 255 x 152 x 80 ) mm Key Components of Digital hot plate-magnetic stirrer: Hot Plate (Heating Element): - Provides a flat surface that heats up electrically. - Controlled via a digital interface for setting precise temperatures. - Often features over-temperature protection for safety.
  1. Magnetic Stirrer:
- Uses a rotating magnetic field to spin a magnetic stir bar placed in the liquid. - Ensures even mixing of the solution without manual stirring. - Speed can be adjusted digitally.  
  1. Digital Display and Controls:
- Allows precise setting of temperature and stirring speed. - Typically includes an LCD or LED screen. - Some models have programmable settings and timers.  
  1. Temperature Sensors:   - Built-in or external probes (like a PT100 or thermocouple) for accurate temperature control.
  Features of Digital hot plate-magnetic stirrer: - Temperature Range: Usually ranges from ambient to 300°C or higher. - Stirring Speed: Typically ranges from 100 to 1500 RPM. Material: The top plate is often made from ceramic, aluminum, or stainless steel to ensure durability and chemical resistance.   Applications Digital hot plate-magnetic stirrer: - Dissolving solids in liquids. - Heating samples while stirring to ensure uniform temperature distribution. - Conducting chemical reactions that need constant stirring and controlled heat. - Biological and pharmaceutical sample preparation.     Benefits of using a Digital Hot Plate & Magnetic Stirrer in laboratory and industrial settings:
  1. Precision and Control- Digital Interface: Allows accurate setting and monitoring of temperature and stirring speed.- Consistent Results: Ensures reproducibility in experiments and solution preparations.
 
  1. Efficient Mixing and Heating- Uniform Mixing: Magnetic stirring eliminates hotspots and ensures even distribution of solutes.- Simultaneous Operation: Ability to heat and stir at the same time improves efficiency.
 
  1. Safety Features- Overheat Protection: Prevents accidents by automatically shutting off at unsafe temperatures.- Sealed Surface: Reduces risk of contamination and easy to clean.
 
  1. Versatility
- Suitable for a wide range of applications including chemical synthesis, biological experiments, and pharmaceutical processes.- Compatible with various types of containers and volumes.  
  1. Compact and User-Friendly- Takes up minimal bench space.- Simple to operate with user-friendly controls and displays.
  2. Durability- High-quality materials like ceramic or stainless steel tops resist corrosion and wear.
  3. Time-Saving Speeds up preparation of solutions and reactions compared to manual stirring and separate heating. Would you like these benefits presented in a slide format or for a product brochure?
Add to cart
Quick view
Pantone Book

Pantone book

,
$0.00

Pantone Book

Pantone Book

Pantone Book

  A Pantone Book, commonly referred to as a Pantone Color Guide, is a professional color matching tool used across industries like graphic design, fashion, printing, packaging, and product manufacturing. It helps ensure consistent color communication from design to final production.   What It Does? - Displays standardized Pantone colors in fan-deck or chip book format. - Provides color codes, ink formulas, and finish types for accurate color replication.     Types of Pantone Books:
  1. Formula Guide (Solid Coated & Uncoated) – For spot color printing.
  2. Color Bridge – Shows Pantone spot colors alongside CMYK equivalents.
  3. Pantone Fashion, Home + Interiors (FHI) – For textiles, soft goods, and home decor.
  4. Pantone CMYK and Pastels & Neons Guides – For process printing and special effect colors.
  ⚙️ Features of Pantone Book: - Thousands of pre-defined colors. - Ink mixing formulas (for printers). - Available in coated, uncoated, and matte finishes. - Some include digital tools or access to Pantone Connect software.   ✅ Benefits of Pantone Book: - Ensures accurate color matching across designers, clients, and manufacturers. - Supports branding consistency across all printed and physical materials.   key benefits of using a Pantone Book: ✅ 1. Accurate Color Communication- Ensures consistent color matching between designers, printers, and manufacturers—globally. ✅ 2. Industry Standard- Trusted across printing, fashion, packaging, and branding for reliable color references.   ✅ 3. Saves Time and Reduces Errors - Eliminates guesswork in color approval, helping avoid costly reprints or corrections. ✅ 4. Versatile Applications - Supports multiple media types: print, fabric, plastics, digital design, etc. ✅ 5. Real-World Color View - Physical swatches show true ink or dye appearance, which digital screens can’t replicate accurately.   ✅ 6. Ink Mixing Formulas - Provides exact mixing guides for printers to replicate spot colors precisely. ✅ 7. Global Consistency - Helps maintain brand color consistency across international production sites.   key features of a Pantone Book: 1. Standardized Color System - Includes thousands of pre-defined Pantone Matching System (PMS) colors with unique codes. 2. Multiple Finish Types - Available in Coated (C), Uncoated (U), Matte (M) formats to match different printing surfaces.   3. Fan Deck or Chip Format - Comes in portable fan-deck or tear-away chip books for easy reference and sharing. 4. Ink Mixing Formulas - Provides precise ink formulas for each color, ideal for print production. 5. Specialized Editions - Guides tailored for graphic design, textiles (FHI), plastics, and digital design.   6. Cross-Media Consistency - Ensures uniform color across print, web, fabric, and packaging. 7. Digital Integration - Many books include access to Pantone Connect for digital workflow and color data sync.   Here’s a simple guide on how to use a Pantone Book effectively: ✅ 1. Choose the Right Pantone Book - Use Formula Guide for print. - Use FHI (Fashion, Home + Interiors) for textiles. - Use Color Bridge to compare spot colors with CMYK.   ✅ 2. Select the Color - Flip through the fan deck or chip book to find the desired color. - Note the Pantone code (e.g., Pantone 186 C for coated paper). ✅ 3. Communicate the Code - Share the Pantone number with printers, manufacturers, or team members to ensure consistent color use.   ✅ 4. Use the Right Finish - Make sure you're referencing coated, uncoated, or matte depending on your final material. ✅ 5. Compare to Printed Proofs - Use the physical Pantone swatch to check if print proofs or samples match. ✅ 6. Maintain Lighting Consistency - View colors under standard lighting (D50) for accurate color judgment.   ✅ 7. Store Properly - Keep the Pantone book in a cool, dry place and replace it every 12–18 months to avoid fading.   Pantone offers a diverse range of color guides tailored to various industries and applications. Here's an overview of the main Pantone book models:     Pantone Graphics & Print Guides  
  1. Formula Guide (Solid Coated & Uncoated)
- Features over 2,390 spot colors with corresponding ink formulations. - Essential for branding, packaging, and print design. - Provides accurate color matching for solid colors.  
  1. Color Bridge Guide (Coated & Uncoated)
- Displays side-by-side comparisons of Pantone spot colors and their closest CMYK equivalents. - Includes CMYK, RGB, and HEX values for digital and print consistency. - Ideal for projects requiring color translation across different media.  
  1. CMYK Guide (Coated & Uncoated)
- Contains a comprehensive range of CMYK colors. - Useful for four-color process printing without spot colors. - Helps in selecting colors achievable through standard CMYK printing.  
  1. Pastels & Neons Guide
- Offers a collection of soft pastel and vibrant neon colors. - Suitable for creative projects in fashion, print, and packaging. - Provides unique color options for special design applications.  
  1. Metallics Guide
- Features metallic spot colors for premium print finishes. Ideal for luxury packaging, branding, and high-end print materials. - Adds a sophisticated touch to printed designs.   Pantone Fashion, Home + Interiors (FHI) Guides
  1. FHI Color Guide (TPG – Paper)
- Contains a wide range of colors for non-fabric materials. - Used in product design, cosmetics, and interiors. - Provides color inspiration for various applications.  
  1. FHI Cotton Passport & Cotton Planner (TCX – Textile)
- Offers colors on cotton fabric swatches. - Essential for textile and apparel design. - Ensures accurate color communication in fabric production.  
  1. FHI Polyester Swatch Book
- Includes colors on polyester fabric. - Useful for sportswear, footwear, and synthetic textiles. - Provides color options specific to polyester materials.   Pantone Specialty Guides  
  1. Pantone SkinTone Guide
- Features a range of skin tone colors. - Used in cosmetics, healthcare, and product development. - Aids in creating products that match diverse skin tones.  
  1. Pantone Plastic Standard Chips
- Provides color references on plastic substrates. - Essential for industrial design, consumer electronics, and appliances. - Ensures color accuracy in plastic product manufacturing.   Pantone Bundles & Studio Sets   - Portable Guide Studio - A comprehensive set including multiple Pantone guides. - Designed for professionals needing a wide range of color references. - Convenient for on-the-go color selection and matching.   - Essentials Set - Combines key Pantone guides into one package. - Ideal for designers seeking a versatile color toolkit. - Offers a cost-effective solution for comprehensive color needs.   Each Pantone guide serves specific purposes across different industries. Selecting the appropriate guide depends on your project's requirements and the materials involved.
Pantone Book

Pantone Book

 
Add to cart
Quick view
Rainin Digital Pipette
Rainin Digital Pipette

Rainin Digital Pipette

,
$0.00

 Rainin Digital Pipette

Rainin Digital Pipette

Digital Pipette

  Rainin Digital Pipette E4-XLS Electronic Pipette,   The Rainin Digital Pipette is a high-precision liquid handling instrument used in laboratories for accurate and reproducible measurement and transfer of small liquid volumes. Manufactured by Rainin Instruments (a Mettler Toledo company), these pipettes are known for their ergonomic design, reliability, and advanced digital controls.   Features of Rainin Digital Pipette:
  1. Digital Volume Setting
- Allows for precise and repeatable volume adjustments via a digital display or dial. - Reduces user error compared to manual pipettes.
  1. High Accuracy and Precision
- Offers minimal variability in volume delivery, making it ideal for sensitive assays and experiments.  
  1. Ergonomic Design
- Lightweight and comfortable to use over long periods, reducing hand strain (good for repetitive tasks). - Often features a finger hook and low pipetting force.
  1. Easy Calibration and Maintenance
- Includes software or manual options for calibration. - Designed for easy disassembly and cleaning.
  1. Durable and Chemically Resistant - Built with high-quality materials that resist damage from chemicals and frequent use.
  2. Models and Volume Ranges - Available in single-channel and multi-channel versions.
Covers a wide volume range from 0.1 µL to 10 mL depending on the model.  
  1. LTS (LiteTouch System) - Many Rainin pipettes use the LTS tip system which reduces tip ejection force and ensures a consistent seal.
  2. Compliance and Traceability - Some digital models offer data storage or integration with lab information systems for traceability.
Applications - Molecular biology - Microbiology - Clinical diagnostics - Pharmaceutical and chemical research   Benefits of Rainin Digital Pipette:
  1. High Accuracy and Precision - Ensures reliable and reproducible results, essential for sensitive experiments.
  2. Digital Volume Control - Reduces human error with easy and precise volume setting via digital interface.
 
  1. Ergonomic Design- Minimizes hand strain and fatigue during prolonged use; ideal for repetitive pipetting tasks.
  2. LiteTouch System (LTS) - Eases tip attachment and ejection, reducing risk of RSI (Repetitive Strain Injury) and improving comfort.
 
  1. Versatile Volume Range - Available in multiple models to handle volumes from microliters to milliliters.
  2. Durable and Reliable - Built with high-quality materials for long life and resistance to chemicals and frequent use.
 
  1. Easy Maintenance and Calibration - Simplified calibration and cleaning ensure long-term performance and compliance.
  2. Data Integrity and Traceability -Some models store data, supporting audit trails and regulatory compliance.
  3. Enhanced Productivity - Quick setup, easy operation, and consistent performance speed up lab workflows.
  Features of Rainin Digital Pipette:
  1. Digital Volume Adjustment - Precise and easy-to-read digital display for accurate volume setting.
  2. High Precision and Accuracy- Delivers consistent results, meeting ISO and GLP/GMP standards.
  3. Ergonomic Design- Lightweight, balanced with low plunger and tip ejection force to reduce fatigue.
 
  1. LiteTouch Tip Ejection System (LTS) - Reduces tip attachment/ejection force, improving comfort and consistency.
  2. Durable Construction - Built with high-quality, chemically resistant materials for long-term use.
  3. Wide Volume Range - Available in multiple models from 0.1 µL to 10 mL.
  4. Single-Channel and Multi-Channel Options - Suitable for various applications including high-throughput assays.
  5. Autoclavable Components- Some parts can be autoclaved for sterilization and contamination control.
 
  1. Easy Calibration and Maintenance - User-friendly calibration settings with accessible parts for cleaning.
  2. Optional Electronic Models - Some versions include programmable features, multiple modes (e.g., reverse pipetting), and memory storage.
Rainin Digital Pipette dealer In Bangladesh, Digital Pipette Importer in Bangladesh, Digital Pipette in Bangladesh, Digital Pipette Machine in Bd, Digital Pipette In Uttara, Digital Pipette Price in Bangladesh, Digital Pipette Supplier in Bangladesh, Digital Pipette in Bangladesh,  
Add to cart
Quick view
Counting Balance-Weighing Scale
Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

, ,
$0.00

Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

  A Counting Balance-Weighing Scale (or Counting Weighing Scale) is a precision electronic scale designed to weigh items and simultaneously count them based on individual piece weight. It’s commonly used in industries for inventory management, packaging, and quality control.   Purpose of Counting Balance-Weighing Scale: To quickly and accurately count small items like buttons, beads, screws, or pills by weight. Eliminates manual counting, especially for large quantities.   Working Principle of Counting Balance-Weighing Scale: Weigh a sample quantity of items to determine the average weight of one piece. Place a bulk quantity on the scale. The scale divides the total weight by the unit weight to calculate the total item count.     Applications of Counting Balance-Weighing Scale: Textile accessories (buttons, rivets) Hardware (nuts, bolts, washers) Electronics (resistors, chips) Pharmaceuticals (tablets, capsules) Benefits of Counting Balance-Weighing Scale:   Fast and Accurate Counting - Saves time by quickly counting large quantities of small items. Reduces Human Error- Eliminates mistakes common in manual counting. Improves Productivity - Speeds up packing, inventory, and quality control processes. Versatile Use - Suitable for various industries: textiles, hardware, pharmaceuticals, electronics.   Cost-Efficient- Reduces labor costs and improves operational efficiency. Compact and Portable - Easy to move and use in different workstations. Dual Functionality - Can be used for both counting and standard weighing. Memory and Tare Functions - Stores unit weights and allows container weight deduction.   Features of Counting Balance-Weighing Scale: High Precision Sensors- Ensures accurate weight and count, even for tiny components. Digital Display- Separate displays for total weight, unit weight, and piece count. Tare Function - Allows deduction of container weight for net measurements. Memory Function - Stores frequently used unit weights for fast recall.   Multiple Units Support- Measures in grams, kilograms, pounds, etc. Sample Size Selection- Users can set sample sizes (e.g., 10, 20, 50 pcs) to calculate piece weight. Overload Protection- Prevents damage from excessive weight. Auto Calibration - Maintains long-term accuracy with internal or external calibration options. Sturdy Platform- Stainless steel pan with anti-slip design for stable weighing. Battery and AC Operation- Can run on rechargeable batteries or power adapter.   How to Use Counting Balance-Weighing Scale: Turn On the Scale - Power it on and wait for the display to stabilize at zero. Tare the Container - Place an empty container on the pan and press the "TARE" button to zero out its weight. Set Sample Size - Place a known quantity (e.g., 10 or 20 pcs) of identical items on the scale. - Enter the sample quantity using the keypad. Confirm Unit Weight - The scale calculates and stores the average unit weight automatically. Add Bulk Items - Add the rest of the items into the container. - The display will show the total count based on the stored unit weight. Record Results   - Note down the total piece count and remove the items. Turn Off After Use - Power off the scale to save battery or electricity.     Counting Balance /Weighing Scale Model : DS610C Brand : DIGISCALE Origin : Germany Capacity : 3 kg Division : 0.1g Min Weight : 0.5g Grade : Class 3 Platter : 280 × 215mm Battery : Rechargeable Battery with AC Adaptor Display : Double Large LCD Display Warranty : One Year Service Warranty SPECIFICATION Build With 5 Measuring Units: kg, g, lb, oz, PCS Count Platter : 280 × 215mm Quality : Heavy Duty Premium Quality Product Net / Gross Weight : 3080g / 3130g Battery : Rechargeable Battery with AC Adaptor Battery Capacity: 6V 4.5Ah / 20 HR Adaptor Power Input : AC 220V-240V / 50Hz Adaptor Power Output : 10V DC/ 500mA Display : Double Large LCD Display Color : White-Gray Keyboard : 20 Members Key Operating Temperature : 0-40°C (32-104°F) FEATURES Auto Zero Tracking Automatic Overload Display Grade Class 3 Auto Backlight Double LCD Display Low Battery Indication Rechargeable Battery with Adaptor Save Electricity Advantage Piece Counting Functionality: The DS603C Counting Weighing Scale is prepared with an precise piece checking highlight, perfect for stock administration, generation lines, and quality control assignments. This guarantees you can tally things like screws, jolts, or other little components efficiently. High-Precision Digital Scale Display: The advanced scale show gives clear and precise readings, making it simple to screen weight and amount. Its shinning and natural interface guarantees ease of use in diverse lighting conditions. Digital Scale Calibration: To keep up exactness, the DS610C weighing scale calibration prepare is direct, guaranteeing the scale remains dependable over time. Normal weight scale calibration ensures reliable execution, indeed with overwhelming use. Durable and Reliable Build: The DS610C advanced weight scale is created with strong materials to withstand visit utilize in requesting situations, such as stockrooms and fabricating facilities. Versatility: As a weighing and tallying scale, it combines the benefits of weight estimation and piece tallying in one gadget. This makes it appropriate for a wide extend of applications, from retail to mechanical uses. Categories: Digital Scale and Balance, Piece Counting Scale, Table Top Scale
Counting Balance-Weighing Scale

Counting Balance-Weighing Scale

 
Add to cart
Quick view
Controller For IR Dyeing Machine
Color Matching Cabinet -light Box

Controller For IR Dyeing Machine

,
$0.00
Controller For IR Dyeing Machine
Controller For IR Dyeing Machine

IR Dyeing machine controller

Controller For IR Dyeing Machine offers exceptional quality .purchasing of our controller provides cost efficiencies, and customization options enabling you to meet your specific requirements comfortably. Collaborate with program A Controller for IR Dyeing Machine is a specialized control system designed to manage and automate the dyeing process in textile manufacturing, particularly using infrared heating technology. These controllers are crucial for achieving consistent dye quality, reducing energy consumption, and optimizing the dyeing process.   Key Features of an Controller For IR Dyeing Machine :
  1. Temperature Control:- Precisely regulates the infrared heaters to maintain uniform temperature across the dye bath. - Supports customizable heating curves (ramp-up, hold, and cool-down phases).
  2. Programmable Logic Control (PLC): - Allows operators to set and automate dyeing programs for different fabrics and dye types. - Supports multiple recipes or programs for different batches.
 
  1. Real-Time Monitoring and Feedback: - Monitors parameters like temperature, fabric rotation, bath circulation, and timing. - Provides real-time data and alarms for deviations.
  2. Touchscreen Interface / HMI (Human Machine Interface): - User-friendly interface for configuring and monitoring processes. - Multi-language support and graphical display of process curves.
 
  1. Data Logging and Traceability: - Records process data for quality control and traceability.
  2. Energy Efficiency Optimization: - Manages IR heater output to reduce energy usage. - Often includes features for auto shut-off or idle mode.
 
  1. Safety Features: - Includes emergency stop, over-temperature protection, and fault detection systems. 8. Connectivity: - Modern controllers may support Ethernet, Modbus, or other industrial communication protocols for integration into factory automation systems.
  Using A Controller For IR Dyeing Machine provides several benefits, especially in textile manufacturing where precision and efficiency are critical. Here are the key advantages:
  1. Improved Dyeing Accuracy and Consistency
- Maintains precise temperature control and timing, ensuring uniform dye uptake across the fabric. - Reduces color variation between batches.  
  1. Enhanced Energy Efficiency- Infrared heating is more energy-efficient than traditional heating methods.- The controller optimizes energy use by adjusting the IR output based on process needs, reducing overall energy consumption.
 
  1. Time Savings- Faster heating and cooling cycles due to infrared technology.- Automated processes reduce manual intervention and cycle times. 4. Better Process Control- Programmable dyeing cycles and precise control over each stage (heating, dyeing, rinsing, cooling).- Real-time monitoring and adjustments improve reliability.
 
  1. Reduced Water and Chemical Usage- More efficient dye penetration and fixation mean less water and fewer chemicals are needed for reprocessing or corrections.6. Lower Operational Costs
- Energy savings, reduced rework, and lower labor input contribute to cost efficiency. - Minimizes fabric damage, reducing material waste.  
  1. Enhanced Safety Built-in alarms, emergency shut-off and automatic fault detection enhance operational safety.8. Data Logging and Traceability- Ability to record and review dyeing process data helps in quality control and troubleshooting.- Facilitates compliance with industry standards and audits.
 
  1. User-Friendly Operation- Modern touchscreen interfaces make it easier for operators to manage and monitor processes.- Multilingual support and visual feedback enhance usability.
 
Add to cart
Quick view
Digital Ink Rubbing Tester
Digital Ink Rubbing Tester

Digital Ink Rubbing Tester

$0.00

Digital Ink Rubbing Tester

Digital Ink Rubbing Tester

Digital Ink Rubbing Tester

  A Digital Ink Rubbing Tester is a laboratory device used to evaluate the abrasion resistance and print durability of printed materials such as paper, packaging, labels, and printed films. It simulates the rubbing action between printed surfaces to test how well ink or coating adheres under friction.   Purpose of Digital Ink Rubbing Tester: - Measures how much ink or print wears off when rubbed against another surface. - Helps assess print quality, especially for packaging, labels, and publications.   ⚙️ Key Features of Digital Ink Rubbing Tester: - Digital Control Panel: For setting rubbing speed, stroke length, and number of cycles. - Adjustable Load: Pressure can be adjusted to simulate real-use friction. - Counter Display: Shows the number of rubbing cycles completed. - Sample Holders: Secure the test samples and rubbing medium in place. - Automatic Stop: Machine stops automatically after the set number of cycles.   Applications of Digital Ink Rubbing Tester: - Used in printing, packaging, and paper industries. - Commonly tests materials like labels, corrugated boxes, printed cartons, and laminates.   ✅ Benefits of Digital Ink Rubbing Tester: - Ensures print durability under handling or shipping. - Supports quality control in production. - Helps in selecting better ink or coating formulations.   ✅ 1. Ensures Print Durability - Tests how well ink or coating resists wear from friction, ensuring quality under real-world handling and shipping. ✅ 2. Improves Quality Control - Detects weak adhesion or poor ink quality early in the production process, reducing rework and returns.   ✅ 3. Precise and Repeatable Testing - Digital settings allow accurate control of speed, pressure, and cycle count for consistent test conditions. ✅ 4. Saves Time and Labor - Automates the rubbing process with pre-set cycles, reducing manual effort and improving efficiency. ✅ 5. Versatile Application - Suitable for a wide range of printed materials: labels, packaging, paper, film, and coated surfaces.   ✅ 6. Supports Product Development - Helps in testing and selecting the best inks, coatings, and substrates for specific use cases. ✅ 7. Meets Industry Standards - Often compatible with standards like ASTM D5264, ensuring credibility in test results.   key features of a Digital Ink Rubbing Tester: ⚙️ 1. Digital Control Panel - Allows precise setting of rubbing speed, stroke length, and cycle count. 2. LCD/LED Display - Shows real-time data like number of cycles, test duration, and operational status.   3. Adjustable Load - Enables setting different pressure levels to simulate various handling conditions. 4. Automatic Cycle Operation - Runs pre-set rubbing cycles and stops automatically after completion. 5. Sample Holders/Fixtures - Securely holds test specimens and rubbing surfaces for accurate testing.   ️ 6. User-Friendly Interface - Intuitive buttons and digital readouts for easy operation and test setup. 7. Compatible with Industry Standards - Supports test methods like ASTM D5264 and TAPPI T830. 8. Compact & Durable Design - Small footprint with a sturdy build for long-term use in lab environments.   Here’s a simple step-by-step guide to using a Digital Ink Rubbing Tester: ✅ 1. Prepare the Samples - Cut the printed material to fit the sample holder. - Cut a rub surface (usually plain or standardized paper) for rubbing contact. ✅ 2. Mount the Samples - Place the printed sample on the base platform. - Secure the rubbing medium in the moving head or upper fixture.   ✅ 3. Set Test Parameters - Use the digital control panel to input: - Number of cycles - Rubbing speed - Stroke length - Load/pressure (if adjustable)   ✅ 4. Start the Test - Press the Start button. - The machine will perform rubbing action based on your settings. ✅ 5. Observe the Results - After completion, inspect the printed surface for ink wear, smudging, or fading. - Record results manually or digitally if the tester supports logging.   ✅ 6. Clean and Reset - Remove samples, clean the fixtures, and turn off the device after use.
Digital Ink Rubbing Tester

Digital Ink Rubbing Tester

 
Add to cart
Quick view
digital-precision-balance

Digital precision balance

,
$0.00

digital precision balance

digital-precision-balance

2/3/4/5 Digit Digital precision Balance

digital precision balance is a weight balance machine. It’s used to Low capacity balance. digital precision balance  play an important role to accurate measurement. Digital precision balance is used to check weight paper, jewelry etc. It shows accurate result. We have the best collection of digital precision balance. MAAM TEX IS the best supplier of Precision Balance in Bangladesh
A Digital Precision Balance is a high-accuracy electronic weighing device used in laboratories, industries, and educational institutions for measuring mass with a high degree of precision. It is essential for tasks that require meticulous weight measurements, such as chemical analysis, formulation, and quality control. Key Features:
  1. High Accuracy & Precision: - Typically offers readability from 0.1 g to 0.001 g (or even finer). - Ideal for weighing small amounts of material where accuracy is crucial.
  2. Digital Display: - Large, backlit LCD or LED display for easy reading. - Some models include touch screen interfaces.
  3. Tarring Function: - Allows you to subtract the weight of a container or packaging to get the net weight.
  4. Calibration: - Internal or external calibration to maintain accuracy over time. - Some advanced models have auto-calibration features.
  5. Weighing Units: - Supports multiple units like grams (g), milligrams (mg), carats (ct), and ounces (oz). Stable Platform:   - Includes a draft shield to protect against air currents and vibrations, which can affect measurement accuracy.
Common Applications:- Laboratory Analysis: Precise measurement of chemicals and reagents.- Pharmaceuticals: Formulation and quality control.- Jewelry: Accurate measurement of precious metals and stones.- Education: Scientific experiments in schools and universities. Benefits:- Reliable and Consistent Measurements- User-Friendly Operation- Compact Design with Minimal Footprint- Improved Workflow Efficiency- Enhanced Data Handling (USB or RS232 ports for data transfer in advanced models) Benefits of digital precision balance Here are the key benefits of using a Digital Precision Balance:
  1. High Accuracy and Precision- Delivers extremely accurate weight measurements, often down to 0.001 g or better.- Crucial for experiments and applications where even slight variations can affect outcomes.
 
  1. User-Friendly Interface- Digital display makes readings easy to read and interpret.- Most models include intuitive controls for functions like tarring, unit conversion, and calibration.3. Speed and Efficiency- Provides instant, stable readings, saving time compared to manual or mechanical balances.- Streamlines lab workflows and enhances productivity.
  2. Versatile Applications- Suitable for various fields including chemistry, biology, pharmacology, food testing, and gemology.- Can handle diverse weighing tasks from solids to liquids and powders.
  3. Advanced Features- Tare Function: Subtracts the weight of containers automatically.- Multiple Weighing Units: Supports various measurement units.- Data Connectivity: Many models allow connection to computers or printers for data logging.
  4. Portability and Space Efficiency- Compact design fits easily in most laboratory setups.- Lightweight models are easy to move and store.
  5. Enhanced Safety and Reliability- Stable platform and draft shields reduce environmental interference.- Built-in calibration ensures ongoing accuracy.
Here’s a step-by-step guide on how to use a Digital Precision Balance safely and accurately: 1. Set Up the Balance- Place the balance on a stable, vibration-free, and level surface.- Avoid placing near fans, windows, or air vents to prevent air drafts.- Allow the balance to warm up (usually 15–30 minutes) if it has just been turned on. ⚙️ 2. Calibrate the Balance - If it’s manual calibration, use certified calibration weights. - For auto-calibration models, follow on-screen instructions. - Calibration ensures accuracy in measurements. ⚖️ 3. Tare the Balance - Place the container or weighing paper on the balance. - Press the “Tare” or “Zero” button to set the display to zero. This subtracts the container’s weight. 4. Weigh the Sample - Carefully add the sample into the container. - Wait for the reading to stabilize (usually indicated by a stable icon or beep). - Read the weight from the digital display. 5. Repeat or Change Units (if needed) - You can press the unit button to switch between grams, milligrams, ounces, etc., depending on your needs.   6. Clean After Use - Remove any spilled substances. - Wipe the surface with a soft, lint-free cloth. Do not use harsh chemicals unless specified by the manufacturer. ⚠️ Tips for Best Use: - Avoid touching the container with bare hands (use tweezers or gloves to avoid adding extra weight from oils or moisture).- Use a draft shield if available to minimize airflow interference.- Do not overload the balance beyond its maximum capacity—it can damage the sensors.
Add to cart
Quick view

Valuable Clients

Maamtexbd | Professional distributor importer supplier & indenter The most complete line of textile testing, Lab, Testing, Garments, spinning mills, Knit Woven & Dyeing, Washing, Instruments, whether you need to meet

1
7
6
12
4
5
11
3
2
9
10
13
14
20
19
18
17
16
15
21
22
23
24
25
Untitled 7
Untitled2
Untitled3
Untitled4
Untitled5
Untitled6
Untitled8
Maamtexbd | Professional distributor importer supplier & indenter

MAAM TEX

Maamtexbd | Professional distributor importer supplier & indenter

MAAM TEX is one of the most reliable Textile Lab Machinery Supplier in Bangladesh. Known for offering a wide range of advanced and modern textile machinery, MAAM TEX ensures that manufacturers access the best equipment for their needs.

This guide provides a detailed over view of Textile Lab Machinery suppliers in Bangladesh, highlighting the features, applications, and explaining why MAAM TEX is the best choice for these products.